Urban Administration And Development Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Urban Administration And Development Tender
Civil And Construction
Building Construction
Eprocure
Opening Date13 Aug 2024
Closing DateCancelled
Tender Amount₹ 28,77,09,850
Costs
EMD
₹ 14,38,550Document Cost
₹ 50,000Tender Fee
₹ 1,180
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UAD_342322_3Bid Award Id
ViewTender No
RESIDENTIAL/PMAY/2024Tender Authority
Urban Administration And Development ViewPurchaser Address
-Website
http://https://mptenders.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
NIT OF BALANCE WORK FOR CONSTRUCTION OF HOUSES AND INFRASTRUCTURE DEVELOPMENT FOR URBAN POOR AT KANIPURA AND MANCHAMAN IN UJJAIN, M.P, UNDER PMAY
TECHNICALSPECIFICATION ANNEXURE E1
BOQ Items
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site on work in transit mixer for all leads, having continous aggitated mixer, manufactuer as per mix design of specified grade for reinforced cement work, including pumping of concrete to
site of laying but excluding the cost of centering, shuttering, finishing and reinforcement. including Admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. Upto Plinth level
119.03
693468
5826
Above Plinth upto floor 2 level
2356.35
14090973
5980
Extra for R.C.C./B.M.C./R.M.C. all works above floor 2 level for each floors or part thereof First Floor
302.34
14814
49
Second Floor
302.34
29629
98
Third Floor
302.34
44443
147
Fourth Floor
306.52
60077
196
Fifth Floor
402.25
98551
245
Sixth Floor
402.25
118261
294
Terrace Floor
121.45
41657
343
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over
laps shall be provided as per requirement of IS : 13920; IS 456 & SP : 34) etc. complete Thermo-Mechanically Treated (TMT) Bars
334175.9
19382202
58
Add extra for providing reinforcement above floor two level for every additional floor or part thereof First Floor
40815.8
23673
0.58
Second Floor
40815.8
47346
1.16
Third Floor
40815.8
71019
1.74
Fourth Floor
41379.97
96001
2.32
Fifth Floor
54303.54
157480
2.9
Sixth Floor
54303.54
188976
3.48
Terrace Floor
16395.53
61975
3.78
Centering and shuttering including strutting, propping stretching etc. complete for and removal of form work by sheet plate or ply wood shuttering for : Foundations, footings, bases of columns, etc. For mass concrete
306.58
49052
160
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc
2791.86
806847
289
Suspended floors, roofs, landings, balconies and access platform
7617.26
2323264
305
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
10115.41
2731160
270
Columns, Pillars, Piers, Abutments, Posts and Struts.
6920.04
2505054
362
Stairs, (excluding landings) except spiral-staircases.
500.97
165320
330
Weather shade, Chajjas, corbels etc., including edges
219.62
90703
413
Brick work with mechanized autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level up to floor 2 level in. Cement mortar 1:4 (1 cement :4 coarse sand)
33.91
153646
4531
Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, class designation 75 Kg/CM2 (average compressive strength) in superstructure above plinth level up to floor 2 level including the cost of scaffolding Cement mortar 1:4 (1 cement :4 coarse sand)
406.82
2030845
4992
Extra for brick work in superstructure above floor 2 level for each floors or part there of . First floor
18.72
2190
117
Second floor
18.72
4380
234
Third floor
18.72
6570
351
Fourth floor
28.6
13384
468
Fifth
29.19
17076
585
Sixth floor
34.39
24141
702
Terrace
188.58
154447
819
Half Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, class designation 75 Kg/CM2 (average compressive strength) in superstructure above plinth level up to floor 2 level including
the cost of scaffolding : Cement mortar 1 : 4 (1 cement : 4 sand)
17337.67
10732017
619
Extra for half brick masonry in superstructure, above floor 2 level for every floors or part thereof by mechanical means by lifting material using mobile crane. First Floor
2260
24860
11
Second Floor
2260
49720
22
ThirdFloor
2260
74580
33
Fourth Floor
3314.2
145824
44
Fifth Floor
3102.33
170628
55
Sixth Floor
3309.03
218395
66
Terrace Floor
643.77
49570
77
Extra for providing and placing in position 2 Nos. 8mm dia. M.S. / HYSD bars at every third course of half brick masonry.
17173.24
1133433
66
Providing and fixing in position factory made precast RCC M-40 doors and windows frames having excellent smooth finish as per IS: 6523 with reinforcement of 3 Nos, 6 mm dia main bars tied with 3 mm M.S stirrups placed @ 200 mm C/C and 6 numbers high strength polymer blocks of required size for fixing hinges including providing 6 no specially designed M.S. galvanised sleeves for accomodating 6 mm dia fully threaded bolts for fixing hold fast on vertical members, providing suitable arrangement for recieving sliding door bolts and tower bolt etc all complete, as per the direction of Engineer in charge. (The cost of hold fast and Cement Concrete block of 1:3:6 (1 Cement :
3 sand : 6 Graded stone agreegate 20mm nominal size) mix is also included in the item.) The frame shall be measured in running meter correct to two places of decimal. Door frame 100mmx 60 mm
5350.4
1765632
330
Stone tile work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) including pointing in white cement with an admixture of pigment to match the stone shade. Granite stone of any colour and shade.
31.92
49284
1544
Providing and fixing 16mm thick gang saw cut mirror
polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand)
with joints treated with white cement, mixed with matchingpigment, epoxy touch ups, including rubbing, curing, moulding and
polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm.
64.8
164721
2542
Providing and fixing pressed steel door frames confirming to IS: 4351manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base
ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike- plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the
surface as directed by Engineer-in-charge: Single rebate 80x50mm
1185.6
350937
296
Single rebate 100x50mm
353.6
109262
309
Double rebate 115x50mm
1596
521892
327
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: Steel work welded in built up sections / framed work including cutting,
48537.85
3349111
69
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 300x16mm
1932
266616
138
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete: 150x10mm
1932
65688
34
Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete: 300x20x6mm
1932
104328
54
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete: 125 mm
1932
40572
21
100 mm
1740
29580
17
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 1.0 mm thick
632.16
304068
481
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. Fixed to steel windows by welding.( Ground flats bedrooms.)
10800
993600
92
Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors. (Weighting not less than 450 gms.)
32
2720
85
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality).
32
15136
473
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.r stopper with necessary screws, etc. complete. Single rubber stopper
192
5760
30
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
12328.32
4216285
342
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)
12394.44
4511576
364
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness
1762.92
1142372
648
With float glass panes of 5.50 mm thickness
467.4
376724
806
Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS : 15622 of approved make in all colours & shades, Ist quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm thickness as per manufacturer specification).
11027.45
10332720
937
Kota stone slabs 25mm thick in risers of steps, skirting,dado and pillars laid on 12mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
1717.32
1629736
949
Kota stone 25mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of 1:4 cement mortar (1 cement : 4 course sand) (minimum size of kota stone 2.0 sqft)
2854.91
2498046
875
Extra for Kota stone/ sand stone in treads of steps and risers using single length above 1.05 meter .
981.81
9818
10
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (6 to 7mm thick) of approved make in all colours, shades of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry including pointing in white cement mixed with pigment of matching shade complete.
5700.96
3950765
693
Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (8mm to 10mm thick) of 1st quality conforming to IS : 15622 of approved make in and colours laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete
455.04
349015
767
Providing and laying Ceramic glazed floor tiles 300x300mm or more (6 to 7 mm thick) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.
5002.08
3236345
647
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete M-15 with aggregate of 20 mm nominal size over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1cement : 3 coarse sand) and a coat of neat cement
rounding the edge sand making and finishing the outlet complete
8
1320
165
12 mm cement plaster of mix: 1:6 (1 cement: 6 sand)
30516.92
4180818
137
15mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)
20344.61
3539962
174
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge.
33238.16
7445347
224
6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand)
17379.44
1929117
111
Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.
7752
217056
28
Forming groove of uniform size from 12x12mm and upto 25x15mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications and direction of the Engineer-in-Charge.
5160
139320
27
12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement: 4 fine sand) Sunk Band
823.2
2469
3
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
4611.03
290494
63
Providing and applying 1.0 mm thick white cement based wall putty of best quality, over plastered surface to prepare the surface even and smooth complete
19518.98
1229695
63
Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr/10 sqm.
19518.98
1561518
80
Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work.
48721.99
2046323
42
Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 kg/10 sqm).
3044.76
97432
32
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.
286.9
41887
146
Finishing walls with Acrylic Smooth exterior paint of required shade. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).
30193.4
2807986
93
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :
-
-
-
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture
925.68
65723
71
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture
1266.65
86132
68
Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (two or more coats) including a coat of approvedsteel primer but excluding a coat of mordant solution.
3143.52
191754
61
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with waterproofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with waterproofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
2826.24
604815
214
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the
surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs With average thickness of 120mm and minimum thickness at khurra as 65 mm.
3072.24
2814171
916
Providing and filling in position bitumen mix filler of Proportion 80 kg.of hot bitumen, 1 kg. of cement and 0.25 cubicmeter of coarse sand for expansion joints.
25.54
3473
136
Providing and fixing in position 12mm thick bitumen impregnated fibre board conforming to IS: 1838 including cost of primer, sealing compound in expansion joints.
844.8
365798
433
Providing and fixing sheet covering over expansion joints with iron screws as per design to match the colour / shade of wall treatment. Aluminium fluted strips 3.15mm thick. 150mm wide
837.6
267194
319
Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine ith strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50 mm thick compacted bed of stone dust sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-in-charge.
555.79
340143
612
Providing and fixing chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails on vertical and horizontal junctions of RCC and brick wall including scaffolding and all lead and lift etc. complete before plastering upt 10 meter height.
1602.72
104176
65
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes. 110mm diameter
170.4
34250
201
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 110mm
176
19712
112
Single tee with door 110x110x110 mm
320
52800
165
Bend 87.5° 110 mm bend
320
32320
101
SANITARY Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : With Modular Bricks class designation 40. 150x100 mm size, P type.
56
103040
1840
Providing and fixing white vitreous china water closet squatting pan (Indian type) P or S trap, complete including cutting and making good the walls and floors wherever required : Orissa pattern W.C. pan of size 580x440 mm
336
480816
1431
Providing and fixing P.V.C. low level flushing cistern with
manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White
288
191232
664
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32mm dia
720
43920
61
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap.
384
509952
1328
Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : white glazed fire clay kitchen sink of size600x450x250 mm
288
579744
2013
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink without drain board 610x460 mm bowl depth 200 mm.
48
189168
3941
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 75 mm outlet Sand Cast Iron S&S as per IS- 1729
1056
570240
540
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plane and brass threaded fitting i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. 15 mm dia
1818.24
198188
109
20 mm dia
240
32160
134
25 mm dia
1536
247296
161
32 mm dia
240
49680
207
40 mm dia
576
149760
260
50 mm dia
936
312624
334
Providing and fixing brass bib cock of approved quality: 15 mm nominal bore 0.40kg
864
192672
223
Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end): 25 mm nominal bore
336
94752
282
40 mm nominal bore
32
18272
571
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm nominal bore
336
95760
285
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore.
144
66528
462
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. - 15 mm nominal bore.
288
129024
448
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
48
20544
428
Providing and placing on terrace at all floor polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
194400
1555200
8
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore
336
136752
407
Providing and fixing C.P. brass wall mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore.
48
93648
1951
Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification. 100 mm dia.
240
12720
53
Providing, laying, jointing & testing of following P.V.C. pipes with solvent cement joint for 6 kg/ sq.cm. pressures including testing of joints, cost of jointing materials etc. complete in all respect. 110 mm dia
2404
468780
195
Providing and laying in position following PVC bends suitable for 6 Kg/Sq. cm. pressure pipes. 110 mm dia
1008
203616
202
Providing and laying in position following PVC Tees, suitable for 6 Kg/Sqcm. Pressure pipes. 110 mm dia
1008
138096
137
Providing and laying in position PVC coupler suitable for 6 Kg/Sq. cm. Pressure pipes 110 mm dia
928
74240
80
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughlywashing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars upto 12 mm diameter
700
2800
4
Bars above 12 mm diameter
1050
9450
9
ANNEXURE N - NON SOR ITEMS Providing, laying and jointing following PVC pipes with solvent cement joint for 6 kg/sq.cm. pressures including testing of joints, cost of jointing materials etc. complete in all respect. [Conform to IS 4985:2000 and IS 7634 (PT-3)] 75 mm dia
1344
263424
196
110 mm dia
-
-
-
Providing and laying in position following PVC bends suitable for 6 Kg/sq.cm. pressure pipes. [Conform to IS 4985:2000 and IS 7634 (PT-3) :2003, IS 7834 (PT-I to VIII): 1987] 75 mm dia
1128
72192
64
110 mm dia
-
-
-
Providing and laying in position following PVC Tees, suitable for 6 Kg/sq.cm. pressure pipes. [Conform to IS 4985:2000 and IS 7634 (PT-3) :2003, IS 7834 (PT-I to VIII): 1987] 75 mm dia
1008
84672
84
110 mm dia
1
138
138
Providing and laying in position PVC coupler suitable for 6 Kg/sq.cm. pressure pipes [Conform to IS 4985:2000 and IS 7634 (PT-3) :2003, IS 7834 (PT-I to VIII): 1987] 75 mm dia
928
51040
55
110 mm dia
1
83
83
Providing and laying in position following PVC Reducers suitable for 6 Kg/sq.cm. pressure pipes. [Conform to IS 4985:2000 and IS 7634 (PT-3) :2003, IS 7834 (PT-I to VIII): 1987] 110x75mm
960
113280
118
Providing and fixing CPVC Ball Valve 20MM of approved quality 20mm nominal bore
24
2959
123.3
Providing and fixing CPVC Ball Valve 25MM of approved quality 25mm nominal bore cpvc
336
66830
198.9
Providing and fixing CPVC Ball Valve 40MM of approved quality 40mm nominal bore
56
30189
539.1
Providing and fixing CPVC Ball Valve 50MM of approved quality 50mm nominal bore
28
28954
1034.1
Providing and fixing PVC Double Y with Door of approved quality 75 mm nominal bore
168
25704
153
110 mm nominal bore
312
79747
255.6
Providing and fixing PVC Plain Double Y of a approved quality 110 mm nominal bore
168
36590
217.8
75 mm nominal bore
96
10972
114.3
Providing and fixing Cowel for PVCpipe of approved quality 110 mm nominal bore
112
5040
45
75 mm nominal bore
56
1864
33.3
Providing and fixing PVC Reducer Tee of approved quality 110 X 75 mm nominal bore
192
21772
113.4
Providing and fixing PVC Reducer of approved quality 110 X 75 mm nominal bore
192
14860
77.4
Providing and fixing 40 mm thick gang saw cut,mirror polished, pre-moulded and pre- polished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cment morter 1:4 (1cement: 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc complete at all levels and floors as directed by Engineer -in-charge. Kota stone Area of slab over 0.50 sqm 35 to 40 mm thick for slab size more than 0.50sqm
518.4
326592
630
Providing and Laying brick bats/AAC Block with mortar using broken bricks/brick bats/AAC Block 25 mm to 115mm size with 20% of cement mortar 1:5 (1 Cement: 5 Sand) in sunken portions complete at all levels and floors as directed by Engineer-in-charge.
662.97
1772715
2673.9
Providing ISI marked factory made 35mm thick flush Door Shutters confirming to IS:2202 (Par-1) laminated type as per following specifications:- (1) Frame of Kiln season and chemichally treated, finger jointed first class hard wood of width not less than 65mm for style, top rail , bottom rail and 125mm for lock rail. (2) block board provided with well matched 3mm thick commercial 3 ply veneering consisting of vertical grains, cross bands and commercial grade face veneers on both outer faces of shutter. (3) kiln seasoned and chemically treated finger jointed second class teak wood internal lipping (battens) of depth not less than 10mm on all edges of shutters fixed in factory by using pneumatic gun. (4) both surfaces of shutters provided with 1mm thick decorative high pressure laminated sheet confirming to IS 2046-1995 of make and shade as approved by EIC/Consultant on plain/wood grain in glass/matt/suede finish with high density protective surface laye not requiring polish, putty or painting work. adhesive on reverse side of laminated sheet shall be as per IS:2046 type S of approved quality.
574.56
1626579
2831
Providing ISI marked factory made 30mm thick flush Door Shutters confirming to IS:2202 (Par-1) laminated type as per following specifications:- (1) Frame of Kiln season and chemichally treated, finger jointed first class hard wood of width not less than 65mm for style, top rail , bottom rail and 125mm for lock rail. (2) block board provided with well matched 3mm thick commercial 3 ply veneering consisting of vertical grains, cross bands and commercial grade face veneers on both outer faces of shutter. (3) kiln seasoned and chemically treated finger jointed second class teak wood internal lipping (battens) of depth not less than 10mm on all edges of shutters fixed in factory by using pneumatic gun. (4) both surfaces of shutters provided with 1mm thick decorative high pressure laminated sheet confirming to IS 2046-1995 of make and shade as approved by EIC/Consultant on plain/wood grain in glass/matt/suede finish with high density protective surface laye not requiring polish, putty or painting work. adhesive on reverse side of laminated sheet shall be as per IS:2046 type S of approved quality.
2523.11
6628209
2627
Providing and fixing 25mm to 30mm thick gang saw cut, and, machine cut for base of kitchen platforms, vanity counters, and similar locations of required size, approved shade, colour and texture laid over support/ chasing with fixing using 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), mortar joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, etc complete at all levels and floors as directed by Engineer-in-charge. Kota stone Area of slab over 0.50 sqm
64.8
64346
993
FIRE FIGHTING Providing laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 1239/3589 i/c fittings like elbows, tees, flanges, reducer, jointing with nuts bolts, gaskets and welding etc. and fixing the pipe on wall/ceiling with suitable hangers, clamps, supports, as required and painting with two or more coats of synthetic. Enamel paint of required shade complete as directed by Engineering-in-Charge. 100 mm dia
364
483392
1328
80 mm dia
42
38682
921
Providing and fixing single headed hydrant valve with instaneous female Gun metal couplings of required dia with cast iron wheel lSI marked conforming to IS 5290 (Type -A) with blank gun metal cap and chain, adopter as required complete as directed by Engineer-in- Charge. 63 mm dia
91
609700
6700
Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS: 2373 : 100 mm dia.
7
45934
6562
Providing, installation, testing and commissioning of gun metal valves of following sizes as required. 25 mm dia.
91
73710
810
Providing and fixing following dia, IS mtr long RRL hose pipe with following dia male and female gun metal couplings duly binded with GI wire, rivets etc. confirming to IS 636 (type-A) as required. 63 mm dia
182
900900
4950
Providing and fixing first -Aid hose reel with MS construction spray painted in post office red, confirming to IS 884 with upto date amendments, complete with the following as required. (a) 30/36m long, 20mm (nominal internal dia) water hose thermoplastic (textile reinfirced) type -2 as per IS 12585
(b) 20mm (nominal internal) dia gun metal globe valve and nozzle.
(c) Drum and brakets for fixing the equipments on wall.
(d) Connections from riser with 40 mm dia stop valve (gun metal) and M.S. pipe.
91
551915
6065
Providing and fixing hose cabinet of size 700mm x 600mm x 300mm made of 16 gauge thick MS sheet with 4 mm thick float glass doors in front painted "FIRE" in red paint i/c necessary locking arrangement suitable to accommodate internal hydrant with butterfly valve 2 nos. 15mtr. Long hose pipe, 1 no. branch pipe mounted on wall or raised brick platform & duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respects for internal hydrant, as directed by Engineer-in-Charge.
91
364000
4000
Providing and fixing 63mm gun metal branch pipe with 20 mm (nominal internal diameter) size gun metal nozzle conforming to IS 903, suitable for instaneous connection to interconnect hose pipe coupling as required.
91
228410
2510
Providing, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze/Gunmetal seat duly lSI marked complete with Nuts, Bolts, washers, gaskets, confirming to IS 13095, of following sizes as required. 100 mm dia.
21
94500
4500
Providing and fixing 2 way fire brigade connection (FBC) of CI body with 2 nos. gun metal male instantaneous inlet couplings complete with cap and chain as required. For 150mm dia MS pipe connection, confirming to IS 904 as required.
7
42000
6000
Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
210
14490
69
Providing and fixing pressure transducer (dial type pressure gauge with isolation cock) in MS pipe line (dial diametre 100mm pressure range 0-10 kg/cm) suitable for 12 volts/24DC. Including connection etc. as required.
7
10570
1510
Providing and fixing Pressure switch in the MS pipe Line including connection etc. as required. Capacity 4.5 kg.
7
10395
1485
Providing, installation, testing and commissioning of dual plate non-return valve of following sizes confirming to IS 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required. 100 mm dia.
7
34300
4900
Providing and fixing of carbon-di- oxide type fire extinguishers consisting of welded M.S. cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge internal discharge tube 30 cm long high pressure discharge hose,discharge nozzle, suspension bracketconforming to IS : 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. Capacity 4.5 Kg.
7
79457
11351
Providing and fixing of ABC Power type fire extinguishers consisting of welded M.S. cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge internal discharge tube 30 cm long high pressure discharge hose, discharge nozzle, suspension bracket. Conforming to IS: 15683 finished externally with red enamel paint fixed to wall with brackets complete with internal charge. Capacity 4.0 Kg.
98
235200
2400
Manual call point: Providing & fixing of manual
calls point flush or surface mounting. Front
protection glass cover. Unbreakable glass ABS
plastic body.
91
65156
716
Internal hooter: Providing &fixing of internal hooter with working AC Voltage 220V A.C./24V D.C. current consumption, sound output 120 DB, material M.S. sheet.
56
44464
794
Fire panel : Providing, fixing, testing & commissioning microprocessor based main fire alarm panel and indicating panel solid state modular card type pulsar, timer for dual stage alarm facility with indicators, stand by battery complies to IS 2189:1999.2 x 16 character backlit LCD display lamp test features. Complete with integral power supply and battery charger for SMF battery. NO/NC contacts for both fire and fault. Switches to enable on board operation. LCD and LED Indication for open, short circuit, Isolate, fire in each zone. reset, lamp test, silence, isolate, short, open, fire continuous buzzer for fault and intermittent buzzer for fire battery charger box, operating voltage 220 Volt mains A.C. input/24V D.C. output etc. complete in all respect. 16 zone fire panel
7
458738
65534
NON SOR ITEMS - ANNEXURE - E Supply and install of fire authority approved electric driven Booster pumps at terrace level suitable for automatic operation and consisting of following: complete in all respect as required conforming to IS 1520/TAC/NFPA-20/UL/FM Approved. Horizontal type, Single/multistage, Centrifugal Monoblock pump of cast iron body and bronze/cast iron/stainless steel impeller with cast iron/stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest outlet at specified flow of 900LPM at 35m head complete with necessary erection of pressure gauge etc. including bypass arrangement for periodical testing of the working of the pumping set and automatic priming arrangement as per requirement. Suitable HP, Squirrel cage induction motor, TEFC, totally enclosed fan cooled type suitable for 415 volts (± 5%) 3 phase, 50 Hz. AC supply, synchronous speed of 2900 RPM, with IP-44 protection for enclosure with Class-'F' insulation, conforming to IS-325 and duly coupled with the above pump with flexible coupling including earthing as per relevant Indian Standard and specifications. Common base plate for mounting pump and motor fabricated of suitable MS Channel as per manufacturer's recommendations, coupling, coupling guard, foundation bolts, Expansion bellows at delivery and suction head both and all require accessories, Suitable cement concrete foundation with cement concrete plaster complete with 4 Nos. Dunlop Anti-Vibration (Cushy foot) heavy duty mounting pads.
7
608107
86872.5
Supply and Install cubicle pattern electrical common control panel confirming to as per IS:2198/TAC Approved suitable for 1no Booster(Terrace pump) pump made of CRCA 14/16 SWG MS Sheet with degree of protection IP 54 duly painted with enamel paint finish of approved shade and comprising of following: Incoming 1 No, 40Amps FP MCCB (35 KA) Bus barsv 1 Set 3 Phase, 4 wire bus bar 500 Amps Aluminium conductor, duly sleeved in PVC colour coded sleeves. Outgoings 1 Nos 200A TP MCCB with neutral link (25 KA) 1 No 63A TP MCCB with neutral link (25 KA) 3 No 32A DP MCCB with neutral link (25 KA) Metering 1 Set RYB phase indication lamps with toggle suitable and protection fuses. 2 No. 0-500 volts, 144 x 144 mm with MCB. 1 Nos. Panel Board
7
117054
16722
Supply and install of XLPE & FRLS insulated PVC outer sheathed, steel armoured, aluminum conductor, 1100v grade power cables with brass compression glands etc to manufactured and tested confirming as per IS:7098-1988 & 1554 part-I & ISI marked. .The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required for cables laying. 3C x 6 Sqmm.
7
40635
5805
Supply and Install of GI Earthing strips of 25 mm x 5mm thick, strip shall be run on floor / ceiling / walls, from the equipment to the nearest Earth pit with necessary accessories as required. (Earth pit is not considered under this scope) as per IS:3043-1987
7
13104
1872
Providing and fixing of Water CO2 type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube long high pressure discharge hose, discharge nozzle Capacity 9.0 Ltr
98
189630
1935
ANNEXURE-II : MANUAL FIRE ALARM SYSTEM Providing, Fixing, Testing and Commissioning the following Supply and install following PVC insulated multistrength FRLS copper wire, 1100v grade, 2C x 1.5 Sq.mm, through MS conduits / surface / recess / above false ceiling /concealed space / wall concealed, etc. for control cabling of Fire detection and alarm devices and interconnecting them to manufactured and tested confirming as per IS:694-1990 & 7098-1988 & 1554 part-I & ISI marked
2396
161298
67.32
Supply and install MS ERW black steel conduits 20 mm dia with wall thickness of 1.4 mm to 1.8mm heavy duty threaded, socket to pipe joined type with all GI fittings screws and saddles for drawing detector control cables on surface/ recess / above false ceiling / concealed space / wall concealed, etc as per IS: 9537 (PT-II) 1981
1992
173543
87.12
Supply and install 2 X 12 Volts 7 AH Lead Acid Maintenance Free Batteries for Standby Power Supply to Main Fire Control Panel.
7
19845
2835
Providing and fixing of Mechanical Foam type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube high pressure discharge hose, discharge nozzle Capacity 9.0 Ltr
7
13545
1935
EXTERNAL DEVELOPMENT Transportation By Mechanical means including loading, unloading and stacking where ever necessary Transportation of excavated earth For a lead upto 1 Km.
92.74
8612
92.87
Earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom, dressing of sides, disposal of excavated earth including of all lift and lead upto 50m. Disposed earth
to be levelled and neatly dressed. ALL KIND OF SOIL
1318.33
199067
151
Filling by available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
3484.19
310092
89
Supplying and filling in plinth under floors including, watering, ramming, consolidating and dressing complete Moorum/Hard copra
4.5
2151
478
Excavation for roadway in soil including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto 1000 meters and as per relevant clauses of section-300.
2403.72
286042
119
Construction of Embankment/Sub grade/ earth shoulders, as per clause 305 & its sub-clauses, Where required but with approved materials/soil like morrum CBR value not less then 7% i/c all lead & lifts i/c excavation,cost of watering, compaction by vibratory roller/ heavy pneumatic type roller and maintenance of surface during construction to ensure shedding & preventing ponding of water (clause 305.3.6) shaping & dressing (clause 305.3.7), finishing etc. complete but excluding scarifying existing granular/bituminous road surface vide clause 305.6.
47715.58
19563387
410
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level Cement concrete grade M-15 (Nominal Mix) with 20 mm maximum size of stone aggregate
10
47550
4755
Cement concrete grade M-10 (Nominal Mix) with 20 mm maximum size of stone aggregate
51.56
217531
4219
Cement concrete grade M-10 (Nominal Mix) with 40 mm maximum size of stone aggregate
246.02
1011634
4112
Construction of granular sub-base by providing Coarse graded material (CBR30), spreading in uniform layers with motor grader on prepared
surface, mixing by mix in place method at OMC and compacting with vibratory roller of 80-100 KN Static weight to achieve the desired density,
complete in all respect as per relevant clauses of section-400.
1549.97
1067929
689
Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing. Cement concrete grade M-15 (nominal mix) with 20mm maximum size of stone aggregate
32
152160
4755
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate.
62.87
341698
5435
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor two level excluding cost of centering, shuttering, finishing and reinforcement Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate
12.5
70700
5656
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor two level excluding the cost of centering, shuttering, finishing and reinforcement with Cement concrete grade M-20 (Nominal Mix with 20 mm maximum size of stone aggregate)
18.18
107843
5932
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP : 34) etc. complete. Thermo-Mechanically Treated (TMT) Bars
181484.15
10526080
58
Providing and laying in position machine batched and machine mixed and machine vibrated design mix cement concrete of M-25 grade mixed in a concrete mixer of not less than 0.2 cum capacity and approporiate weigh batcher using approved mix design, for reinforced cement concrete work including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement. including Admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. Upto Plinth level
39.98
221769
5547
Providing laying and jointing of galvanised Iron Pipes with specials (such as bends, elbows, tees etc) class light, medium & heavy including testing of joints, cost of pipes, specials and jointing materials all complete. Heavy 50mm dia
200
94200
471
65mm dia
100
62000
620
Construction of Dry lean cement concrete Sub-base over a prepared subgrade with coarse and fine aggregate conforming to IS: 383, the size of
coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per MORTH Specifications Table 600-1, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per relevant clauses of section- 601.
605.79
1699846
2806
Construction of dowel jointed, plain cement concrete pavement in M-40 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine agreegate conforming to IS:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant,debonding strip, placing of dowel bar and tie rod, admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per IRC-15 2011 and as per relevant clauses of section-602 of of MORTH specifications complete but excluding
cost of steel in dowel bar & tie rod etc
1101.76
5823903
5286
Providing and fixing full way gate valves tested to 21.00 kg/sq.cm. 80 mm Dia
3
12429
4143
50 mm dia
6
7734
1289
Providing and fixing class-II Globe wheel valves, confirming to IS 778/1984 (Reaffirmed 2005), tested to 21.09 kg/sq.cm. Flanged
-
-
-
50mm dia
5
5375
1075
65mm dia
3
5250
1750
Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894- 2002, class designation 75 Kg/CM2 (average compressive strength) in superstructure above plinth level up to floor 2 level including the cost of scaffolding : Cement mortar 1:4 (1 cement :4 coarse sand)
202.76
1012177
4992
Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) 50 mm dia 8kg/sqcm pressure rating
500
50500
101
90 Dia HDPE pipe 8 Kg/sq.cm
728.76
225915
310
Providing and laying Bend 90 confirming to IS specifications. 8 Kg/sq.cm 90 mm dia HDPE
15
3630
242
Providing and laying Bend 45 confirming to IS specifications.8 Kg/sq.cm 90 mm dia HDPE
6
1452
242
Providing and laying Equal Tee confirming to IS specifications. 8 Kg/sq.cm 90 mm dia HDPE
7
2352
336
Providing and laying Pipe end confirming to IS specifications. 8 Kg/sq.cm 90 mm dia HDPE
7
1365
195
Providing and laying Reducer 8 kg/sq.cm : confirming to IS specifications. 8 Kg/sq.cm 90 Dia HDPE pipe
3
501
167
Providing and laying Reducer 8 kg/sq.cm : confirming to IS specifications. 8 Kg/sq.cm 90 mm dia HDPE
4
752
188
Providing butt fusion welded joint/jointing by heating to the ends with the help of Teflon coated electric mirror/heater ends together etc. by thermosetting process to HDPE Pipe and specials. (6kg, 8kg, 10kg) (50mm & above fusion jointed & below 50mm mechanical jointed) 8 Kg/sq.cm 90 mm dia HDPE
7
987
141
Providing and fixing of retro-reflectorized cautionary, mandatory and informatory sign board as per IRC 67-2012 made of high intensity Micro Prismatic Grade Sheeting (Type IV) vide IRC : 67-2012 clause 6.7.3.2 & clause 801.3.3 of MORT&H firxed over Aluminium composite material sheet with thermoplastic core of Low density Polyethylene (LDPE) between two thick skins/sheets of aluminium with overall thickness of 4mm and aluminium skin of thickness 0.3 mm on both side, the ACM shall conform to Table 6.1 of IRC : 67-2012 Table 800-1 of MORT&H specifications and High Intensity Micro Prismatic Grade Sheeting shall conform of Table 6.6 of IRC 67-2012 & table 800.3 of MORT&H specifications. In line with clause 6.8 of IRC : 67- 2012 & clause 801.3.7 of MORT&H the messages (legends, numerals, letters etc.) & borders shall be screen printed or of cut out from transparent durable overlay or cut out from the same type of reflective sheeting for cautionary/mandatory signs. Screen printing shall be processed & finished with materials and in a manner specified by the sheeting manufacturer supported on MS angle iron sign post of size 75mm x 75mm x 6mm fixed to ground by means of properly designed foundation of dimension 450 x 450 x 600 mm with M-15 grade concrete. The ACM sheet shall be fixed to the post with minimum four number breakaway bolts & supported with a back support frame of 25mm x 25mm x 3mm angle. 7 years Warranty for Retro Reflective Sheeting to be provided from the original sheeting manufacturer as per clause 6.9 of IRC : 67-2012 & a certificate of having the sheeting tested for co-efficient of retroreflection, specular gloss and fungus resistance, dy time colour and luminance, shrinakge, flexibility, linear removal, adhesion, Impact resistance,3 year outdoor weathering and its having passed this test from an independent test lab as per clause 6.7 of IRC : 67-2012 for the product offered shall be submitted by the contractor. 90 cm equilateral triangle
4
15816
3954
60 cm equilateral triangle
4
10820
2705
80 cm x 60 cm rectangular
4
19164
4791
60 cm x 45 cm rectangular each
4
13756
3439
Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter,
demarcation at site and traffic control as per relevant clauses of section-800 & I.R.C.-67 including cost of paint etc. complete.
185.74
17459
94
Construction of cement concrete mountable/ barrier type kerb / kerb with channel in M 20 grade laid with kerb laying machine, all complete as per design approved by Engineer-in-Charge..
474.27
2602319
5487
Painting two coats on concrete surface after filling the surface with synthetic enamel paint in all shades as per relevant clauses of section-800 & I.R.C.-67 including cost of paint etc. complete.
1328.26
71726
54
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
22.5
1552
69
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete.
22.5
1890
84
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
4230
389160
92
Providing and fixing G.I. chain link fabric fencing of required width and mesh size including strengthening with 2mm dia wire or nuts, bolts and washers as required complete with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer- incharge. (Cost of post, painting, earthwork and CC to be paid separately) With G.I. barbed wire
400
194000
485
Supplying and stacking sludge at site including royalty and carriageup to 1 km (sludge measured in stacks will be reduced by 8% for payment).
402.5
85732
213
Uprooting rank vegetation and weeds by digging the area to a depth of 30 cm removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water,
uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts.
4025
104650
26
Mixing earth and sludge or manure in proportion specified or directed.
402.5
6037
15
Grassing with "Doob" grass i/c watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed. In rows 5 cm apart in either direction.
4025
251280
62.43
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 1.2 m dia and 1.2 m deep
200
28200
141
Holes 60 cm dia and 60 cm deep
260
15860
61
Edging with 2nd class bricks laid dry length wise including excavation, refilling, consolidating with hand packing and spreading surplus earth within a lead of 50 m. 50 class designation bricks :-
160
5120
32
Providing and planting different variety of plants of approved quality and sizes as mentioned including making pits of required size at site, refilled with B.C. Soil mixture manuring and pesticide etc. complete (to be paid separately) including watering and 90 days maintenance from the date of final bill as per direction of Engineer-in-Charge complete in all respect (B.C. Mixture paid separately). Shrubs :-
Bahunia Tomentosa, Beloperone Species, Caselpinnia Pulcherima, Bird of Paradise, Callandra Emarginata, Callandra Hybrida, Cassia Bi flora, Cassia Laevigata, Cestrum Nocturnum, Dombeya Mastersii, Euphorbia Caracasana, Euphorbia Pulcherima, Excorea bi color, Excorea tri color, Ficuas Blackii, Ficus Reginold, Ficus Panda, Gardenia, Gulphinia, Jasminoides, Hamelia Pattens, Heliconia, Hibiscus Rosasinensis, Hibiscus Verigated, Hibiscus Viceroy, Jatropha Multifida, Largestomia Indica, Malpighia Coccigera, Murraya Exotica, Murraya Koeniggi, Murraya Sambucum, Mussaenda Erythrophylla, Nerium Oleander, Nyctanthus Arbortristis, Plumbego Capensis, Putranjeeva Roxburghii, Tabernaemontana Coronaria,
Tabernaemontana Divaricata, Tecoma Gaudi Chaudi, Tecoma Stans, Thevetia Nerifolia, Thuja Compacta and equivalent plants.
60
4800
80
Creeper plants (height:30cm to 45 cm)
Allamanda Cathartica, Allamanda Grandiflora, Allamanda Violacea, Begnonia Venustha, Boughan Villas (Variety : Butiana, Lady Mary Bearing, Mahaara, Mohan, Scarlet Queen Variagata, Glabra Formosa, Peruviana Odissi, Partha, Shubhra, Thimma, Spectabillis, L.N. Birla, Refulgens), Clerodendrum Splendens, Clerodendrum Thompsonae, Ipomea Purpurea, Jasminum Grandiflorum, Jasminum
Humile (Yellow), Passiflora Caerulea (Rakhi Bel), Petrea Volubilis, Quis Qualis Indica, Tecoma Grandiflora, Veronia Elaegnifolia (Curtain Creeper), Mandvellia, Garlic Creeper, Callimitis
180
9000
50
Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine ith strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50 mm thick compacted bed of stone dust sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-in-charge.
238.5
145962
612
Providing and laying 80mm thick factory made cement concrete interlocking paver block of M -40 grade made by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50mm thick compacted bed of stone dust sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-in-charge.
2555.66
1765961
691
Earth work in excavation of foundation of structures with all lifts & lead upto 1000 meters as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom as per relevant clauses of section 300 & 2100 in. Soil By Manual Means upto 3 m depth
7931.55
1435610
181
3 m to 6 m depth
5614.9
1201588
214
Providing, Laying and jointing non-pressure (NP2) RCC socket & spigot pipes with rubber gasket joint including testing of joints. 200 mm.dia
227
96929
427
225 mm.dia
60
28080
468
250 mm.dia
26.76
13540
506
300 mm.dia
387.5
275125
710
400 mm.dia
97.5
93112
955
450 mm.dia R.C.C. pipe NP2
393
454308
1156
Providing & laying levelling course/annular filling in PCC M-15 nominal mix in foundation as per relevant clauses of section 1500, 1700 and 2100.
225.8
970714
4299
Providing and Laying non-pressure (NP3) RCC socket & spigot pipes with rubber gasket joint including testing of joints. 600 MM DIA
1343
4766307
3549
Providing and laying Plain/Reinforced cement concrete (mixed in concrete mixture) in open foundation including form work shuttering etc. complete as per drawing and technical pecifications and as per relevant clauses of sections 1500, 1700 & 2100 with . PCC Grade M15
53.2
252380
4744
RCC Grade M25
1931.3
10212714
5288
Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and technical specifications and as per relevant clauses of sections 1600. @ 150 kg/cum
22.05
1321831
59947
12mm cement plaster on walls 1:4 (1 cement: 4 fine sand)
1203.13
179266
149
20mm cement plaster of mix 1:4 (1 cement: 4 fine sand)
1118.72
237168
212
1:6 (1 cement: 6 fine sand)
85
16490
194
Providing and laying Plain/Reinforced cement concrete in sub-structure as per drawing and technical specifications and as per relevant clauses of sections 1500, 1700 & 2200 RCC Grade M25
146.97
802750
5462
Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specifications and as per clause 2706 of specifications.
155.65
26927
173
Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MORTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification.
23.76
28773
1211
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge. Sand Faced Plaster
49.02
10098
206
6 mm cement plaster of mix: 1:3 (1 cement: 3 fine sand)
1
111
111
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
159.9
10073
63
12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement: 4 fine sand) : Sunk bands
3225.83
9677
3
18 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement: 4 fine sand) : Sunk bands
245.1
735
3
Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats
1.8
140
78
Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 kg/10 sqm)
2324.72
106937
46
Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (two or more coats) including a coat of approvedsteel primer but excluding a coat of mordant solution.
1.8
109
61
Providing and laying Cement concrete (mixed in concrete mixture) wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications and as per relevant clauses of sections 1500, 1700 and Clause 2702 of specifications..
5
27985
5597
Filler joint Providing & fixing 20 mm thick & 25cm deep compressible fibre board in expansion joint complete as per drawing & Technical Specification and as per relevant clauses of section 2600.
111.63
31814
285
Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications and as per relevant clauses of section 2500.
43.2
60480
1400
Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification and as per relevant clauses of section
2500.
28.8
39513
1372
Providing, driving and installing driven cast-in-situ reinforced cement concrete piles of specified diameter and length below the pile cap M 35 in cement concrete, to carry safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of shoe and the length of pile to be embedded in the pile cap etc. all complete. (Length of pile for payment shall be
measured from top of shoe to the bottom of pile cap) : 400 mm dia piles
8
12952
1619
Boring, providing and installing bored cast-in-situ reinforced cement concrete pile of specified diameter and length below the pile cap M-35 in cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with, bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap). 300 mm dia piles
8
9784
1223
Providing, erecting and giving test of Centrifugal Monoblock pump set conforming to IS 9079 operating at 2900 RPM with CI impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type. Pump set shall be suitable for working at various discharge and head requirements. Pump shall be erected on Provided C.C. foundation block with suitable foundation bolts grouted in C.C. foundation block. Centrifugal Monoblock Pump set (single Stage 10.0 HP
4
122316
30579
Constructing Brick masonry manhole in cement mortar 1:4 (1cement:4 fine sand) RCC top slab Cement Concrete grade M-15 (Nominal Mix) with stone aggregate 20mm nominal size, foundation in cement concrete grade M-7.5 (Nominal Mix) with stone aggregate 40mm nominal size, inside plastering 12 mm thick with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement and making channels in Cement Concrete grade M-15 (Nominal Mix) with stone aggregate 20mm nominal size including finishing the channel to shape, curing etc. with CI cover with frame etc. Man hole with above specifications having inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty)
450x600 mm clear opening as per IS : 1726 : 1991.
22
190432
8656
Man hole with above specifications having inside size 90x80 cm and 60 cm deep including C.I. cover with frame (light duty)
450x600 mm clear opening as per IS : 1726 : 1991.
21
200823
9563
Man hole with above specifications having inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium
duty) 500 mm clear opening as per IS 1726 : 1991.
16
303312
18957
Man hole for property connection (House connection) in narrow lanes. Man hole with above specifications having inside size 600x450mm and 900mm deep including SFRC rectangular Man hole Cover and frame (medium Duty) 600mm x 450mm complete.
3
17562
5854
Add/ deduct for variation of depth of man holes given at item 17.2 90x80cm size manhole
19
113848
5992
Making connection of drain or sewer line with existing service lines manhole including breaking into and making good the walls, floors etc. with cement concrete grade M-15 (Nominal Mix) with stone aggregate 20mm nominal size plastered with Cement Mortar 1:3 (1 Cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels etc. complete. For 250 to 300 mm dia pipes
11
5973
543
For 300 to 450 mm dia pipes
2
1452
726
Construction of Brick masonry road gully chambers with brick work in cement mortar 1:5 (1cement: 5 course sand ) and 12mm plaster 1:3 including foundation in cement concrete grade M-5 (Nominal Mix) with stone aggregate 40mm nominal size Including precast reinforced cement concrete top cover and frame. Chamber 50x45x60cm with horizontal grating 500x450mm
21
83349
3969
Providing & fixing of precast reinforced cement concrete manhole cover and frame including cost of transporting at site and all material etc. complete 450x900 mm dia extra heavy duty
12
44496
3708
Filling with moorum for pipe bedding or over the pipe includingsupply of moorum/sand
235.31
169423
720
Providing and laying in position Plain cement concrete (PCC) of specified grade excluding the cost of centering and shuttering Cement concrete grade M-10 (Nominal Mix) with 20 mm maximum size of stone aggregate
126.92
535475
4219
Brick work with well burnt chimney bricks in bulls patent trench kiln crushing strength not less than 25kg /sqcm and water absorption not more than 20% in foundation and plinth Cement mortar 1:4(1 cement : 4 coarse sand)
3
13305
4435
12 mm cement plaster of mix 1:4 (1 cement: 4 sand)
16
2384
149
Centering and shuttering including strutting, propping stretching etc. complete for and removal of form work by sheet plate or ply wood shuttering for : Foundations, footing base of columns, plinth beam in any shape and size upto plinth level
191.05
30568
160
Walls (any thickness) including attached pilasters butteresses, plinth beams and string courses etc.up to plinth level.
107.83
31162
289
Suspended floors, roofs, landings, balconies and access platform.
70.07
21371
305
Lintels, beams, plinth beams, girders, bressumers and cantilevers
386.31
104303
270
Columns, Pillars, Piers, Abutments, Posts and Struts
430.06
155681
362
Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well with in the selected habitation, including Photography, interpretation of resistivity data and submission of report in the desired format along with resistivity necessary graph, photographs and readings.
4
6176
1544
Drilling of perfectly vertical bore hole of a diameter suitable to receive 125mm nominal diameter casing pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 125mm nominal diameter M.S./G.I./U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete. in all types of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders etc.
20
10060
503
in all types of rocks.
240
155520
648
Drilling of perfectly vertical bore hole of a diameter suitable to receive 150mm nominal diameter casing pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 150mm nominal diameter M,S./G.I./U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete. in all types of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders etc.
20
11320
566
in all types of rocks.
240
171840
716
I.S.I. marked UPVC casing pipe confirming to IS 4985/1988 (with up-to-date amendments) Screen pipes with ribs 150mm dia
48
39888
831
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing
of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. 32 mm nominal outer dia .Pipes.
136
28152
207
Providing and fixing G.I. Pipes (medium grade) complete with G.I. Fittings including trenching and refilling etc. (For External work) 15 mm Nominal Bore.
180
22680
126
25mm nominal bore.
180
34920
194
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 15mm nominal bore.
20
3140
157
R.C.C. Ground Service Reservoirs & Sumps Cost of 50,000 Litres Capacity
1
545800
545800
Cost of 1,50,000 Litres Capacity
1
1086761
1086761
Providing and fixing soil, waste and vent pipes : 100 mm dia. Sand cast iron S&S pipe as per IS : 1729
2
1082
541
Designing and preparing good for construction civil, mechanical and electrical shop drawings of conventional/package unit of a Sewage Treatment Plant(STP)/ Effluent Treatment Plant (ETP) as per manufacturer/vender's design and specification consisting of treatment units complete for meeting up to date/ target parameters of treated effluent conforming to Madhya Pradesh Pollution Control Board (MPPCB), MoEF GOI guidelines, National Green Tribunal guideline 30.4.2019 and technical specifications codes of practices as published by the Bureau of Indian Standard (BIS) and latest version of “Manual on Sewerage and Sewage Treatment” published by the Central Public Health And Environmental Engineering Organization (CPHEEO). The work shall include supplying, installing, testing and commissioning of electro-mechanical equipments, instruments, pipes, valves, pumps, and gauges etc. as per approved technical specifications, layout and drawing of STP/ETP. Most of the electro-mechanical unit will be placed below ground under road/greenarea/as per site condition, space available, equipment and pump room will be above the ground level and civil work RCC (M25) according to the approved shop drawings and direction of Engineer in charge. Civil work shall be paid separately. Rates are inclusive of cost of operation and maintenance (O&M) for one year after completion of works which include periodical
/monthly checking quality of treated sewage, checking of safety arrangements and routine maintenance of plant such as oiling, greasing, cleaning, operating, providing Consumable replacement of components within guarantee period, disposal of dried sludge and also ensuring safety against theft. The STP/ETP shall comprise of the units of required size as per detail process and hydraulic design.
NOTE :-
1- If STP and ETP plant are situated in the same campus then only one O&M Contract shall be applicable. 2- Treated water effluent testing shall be got done by the vender from Pollution Control Board (PCB) approved laboratory only covering parameters such as - BOD, COD, TSS, PH,
O&G, TKN, TP and E COLI etc.
3- Main power supply with earthing up to main control panel of STP/ETP shall be provided by the owner/department. The electrical panel which will be supplied by the vender will also include all the required NO/NC contacts and provision for BMS connectivity.
4- Detail specifications of components shall be as per manufacturerstipulation and preamble both.
5- Tanks shall be made of MSFRP (mild steel fiber reinforced polymer/plastic)/ HDPE (High Density Polyethylene)/FRP (Fiber reinforced plastic) anti corrosive in packaged unit.
Conventional MBBR STP Technology Primary Treatment –
-Manual Bar Screen
-Oil, Grease Trap and Grit Removal System
Secondary Treatment –
-Raw Sewage Transfer Pump (01set)
- Air Blower (01set) and Diffuser System
- Media
-Tube Media/Lamella
-Chlorine Dosing system with Chlorine Dosing
Pump(01set)
-Sump Pump (01set)
-Plant/Interconnecting Piping And Valves
-Manual/PLC Based Electrical Control
Panel
-Incoming/Outgoing Feeder
-Cable Laying With Cable Tray
-Earthing Systems Pressure Gauges
Level Switches
Online Rota meter
Air Rota meter
Flow meter
Filter Feed Pump
Multi Grade Sand Filter
Activated Carbon Filter
Micro Filtration system Sludge Handling system –
Sludge Recycling Pump
Sludge Feed Screw Pumps
Filter Press system 200 KLD
1
3795593
3795593
ANNEXURE-E : NON SOR ITEMS Providing and fixing a set of 3 PVC Dust Bin of 0.30 cum. Capacity to fixed in 50x50x5 mm angle iron frame, moving on axis as per design given. (for primary storage of household solid waste.
10
30000
3000
Making of water recharging pit including construction of 600x600x1000mm deep (wall and base 100mm th.) RCC pit with 100mm th. perforated pre-cast RCC cover and Boringholes at the base of the chamber with auger for under reamed piles of 250mm dia.up to a depth of 3.60 m below ground level and below sub soil water level and soil including fixing of PVC perforated pipe casing of full depth and filling with stne aggrigate filter media complete as per detail.
1
30000
30000
WATERING PUMPS Supplying, installation, testing & commissioning of centrifugal monoblock pump set of suitable 7.5 HP Capacity for discharge of 10 LPS water on an over all head of 28 Meter including suction, discharge & firctional losses (suction 65 MM X discharge 65 MM ) driven by electric motor suitable for 3 phase, 50Hz, 415 V AC supply i/c connections with the existing water supply line as required.
6
132000
22000
Supplying & Fixing of 'B' class G I pipe of 65 mm dia (approved make) including accessories like bends, unions, socket etc. on the suction side of the above pump as required .
60
28680
478
Supplying & Fixing of 65 mm dia bronze foot valve (approved make) on the suction side of the above pump as required.
6
12000
2000
Supplying & Fixing of 65 mm dia gun metal gate valve (approved make) on the discharge side of the above pump as required.
6
9000
1500
Supplying & Fixing of 865 mm dia gun metal return valve (approved make) on the discharge side of the above pump as required.
6
15000
2500
Providing priming arrangement for the above pump by using 15 mm dia 'B' class G I pipe including accessories like bends, unions, sockets, reducers, nipples, funnel etc. including connections with the existing water supply line as required.
6
12000
2000
Supplying & fixing gun metal gate valve (approved make) suitable for 15 mm dia pipe line as required.
6
3000
500
Supplying & fixing of water pressure gauge (approved make) suitable for 5 HP pump as required.
6
3000
500
SITC of wall mounted cubical type panel for centrifugal pump made of 16 SWG MS sheet suitable to accommodate supplying & installing following items in it i/c wiring the panel with suitable size of copper control cable, painting of panel with two coat of red oxide, synthetic enameled paint of approved colour and make (as a) D.O.L. starter - 2 No. b) 30 Amps TPN 10 K MCB - 1no. c) 6-32 Amps TP 'G' series MCB - 2 nos.d) Providing and fixing 100 amps copper busbar of 4 strip with insulators.e) Single phasing preventer with water level guard - 2 No. f) Indicating lamp set - 3 nos. for phase indication.g) Holding arrangement of capacitor. h) Ammetter (0-10 amps) - 1 no.i) Voltmeter (0-500 volts) - 1 no. j) Selector switch - 2 nos.
3
60000
20000
Supplying and laying/fixing of 4 x 6 sq.m. copper conductor, armoured cable from pump to control panel as required.
60
12000
200
Earthing as per IS 3043 with G.I. Earth pipe 2.5 mtr. long and 40mm dia with masonary enclosure in cement mortor cover plate having locking arrangement on the top etc. Complete with charcoal or coke and salt as per specification with excavation and refilling complete as required.
6
18000
3000
Providing and putting additional salt and coke, if required in the existing earth pit. 1) Salt
60
600
10
2) Charcoal / coke
150
3000
20
Supplying and laying 6 SWG GI wire at 0.50 mtr below ground level for conductor earth electrode including soldering etc as required.
300
3000
10
ELECTRICAL WORKS Circuit Wiring Wiring for circuit wiring with PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) of ISI marked suitable size including painting etc. as required as per specification a) 2x2.5 Sq.mm.
8474
1050776
124
b) 4x2.5 Sq.mm.
2212
367192
166
WIRING IN CONCEALED RIGID PVC CONDUIT (HEAVY DUTY) SYSTEM WITH MODULER ACCESSORIES Point wiring including metallic switch box, sheet, switche, socket, lamp holders/ceiling roses etc with 1.5 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI Marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit including painting etc. as required as per specification for :- Light Point/Fan Points. a) Short point
1668
852348
511
b) Medium point
3246
3125898
963
c) Long point
1718
2518588
1466
3 Pin 6 Amp socket outlet on Separate Board a) Short point
48
26352
549
b) Medium point
810
810810
1001
c) Long point
48
72192
1504
Call Bell / Buzzer Points c) Long point
336
499968
1488
Twin Control light points b) Medium point
384
392064
1021
Point wiring including metallic switch box, sheet, switche, socket for 3 pin 6 Amp. Socket outlet point with 1.5 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit with required materials as per specification on same board.
1818
443592
244
Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for joints as per specification for :- On separate board Medium point
48
83952
1749
Long point
336
877632
2612
Extra long-I
96
350208
3648
CIRCUIT WIRING IN EXISTING CONDUIT / PVC CASING CAPPING Supplying and drawing single core PVC insulated cable FR with copper multi strand conductor ISI marked in existing rigid conduit in surface or concealed as per specification. 2.5 Sq mm cable 1 X 2.5 sq mm
8474
347434
41
2 X 2.5 sq mm
2212
181384
82
4.00 Sq mm cable
-
-
-
3 X 4.00 sq mm
2500
385000
154
6.00 Sq mm cable
-
-
-
1 X 6.00 sq mm
4200
277200
66
4 X 6.00 sq mm
4200
1113000
265
Supplying of ISI Marked AutomaticTransfer Switches (ATS) confirming to IEC : 60947-1 & IEC : 60947-6-1 with automatic inbuilt time delay 4 pole, 415 V with two earthing terminals if required. 100 Amp (with enclosure )
1
28898
28898
Supplying of ISI Marked and approved make of Moulded Case Circuit Breaker (MCCB) suitable for 3 phase,3 pole, 50 Hz, 415 Volts, AC supply with respective interrupting capacity (KA) at 415 Volts cited against their range standard conforming to IS - 8828 MCCB with Breaking Capacity 25 KA at 415 V Current Rating -25 to100 Amps & 70% -100% adjustable
6
22602
3767
Current Rating -125 Amps & 70% -100% adjustable
32
161120
5035
Current Rating -160 Amps & 70% -100% adjustable
7
47047
6721
Current Rating -200 Amps & 70% -100% adjustable
3
20763
6921
MCCB with Breaking Capacity 35 KA at 415 V Current Rating -315 Amps & Adjustable: 70% -100% thermal & 5-10 times magnetic setting
5
81575
16315
Current Rating -500/630 Amps & Adjustable: 70% -100% thermal & 4-10 times magnetic setting
1
17312
17312
Supplying of ISI Marked and accepted standard of Miniature Circuit Breaker (MCB) of 'C' series suitable for 240/415 Volts, 50 Cycle , 10 kA Value AC supply confirming to IS : 8828 : 1996, IEC : 60898:2002 but without enclosures :- SINGLE POLE (SP) 6 Amp to 32 Amp Rating
2956
239436
81
DOUBLE POLE (DP) 6 Amp to 32 Amp Rating
390
96720
248
FOR TRIPLE POLE (TP) 50 Amp to 63 Amp Rating
50
32650
653
FOR TRIPLE POLE & NEUTRAL(TPN) 6 Amp to 32 Amp Rating
48
25536
532
For 40 Amps. Rating only.
4
2784
696
Supply of approved make powder coated sheet steel encloser SPN MCB DB inclusive of Busbar, Neutral bar, Earth bar & two earth terminals etc. complete as per IS:13032( exclusive of MCB & isolator)- 6 way double door
390
232050
595
Supplying of approved make TPN MCB DB Metal Double Door with provision for FP MCB/Isolator/RCCB/RCBO as incomer and SP MCBs as outgoing inclusive of Busbar, Neutral bar, Earth bar & two earth terminals etc. complete as per IS:13032( exclusive of MCB & isolator ): 4 way (4+12)
50
62550
1251
Fixing of MCB /MCCB/ Isolator Fixing of MCB / Isolator SP/DP in sheet steel enclosure as required as per accepted practice, including mounting on busbar and cable connection etc. complete (Labour only )
2790
47430
17
Fixing of MCB /MCCB Isolator TP /TPN/FP in sheet steel enclosureas required as per accepted practice, including mounting on busbar and cable connection etc. complete.
98
3430
35
Labour charges for fixing sheet steel enclosures, MCB DB flush mounting type, as per accepted practice, duly embedded and end plate completely flushed in wall, cable connection etc.complete :- FOR S.No :- 8.5(1) to 8.5(5), 8.6(1) to 8.6 (5) & 8.7(1)
350
99050
283
Supplying and fixing as per specification Bulk Head fitting of approved make suitable for 100 Watt lamp with necessary materials complete. Locking arrangement for Switch Gear Mounting
16
1008
63
Supplying, fixing,testing & commissioning wall / floor mounted LT Panel primer coated with two coat of enamel paint & provided with required gasket for dust/ vermin proof with degree of protection IP42 suitable for 415V 3 phase ,50 Hz ,4 wire system fabricated out of CRCA sheet upto 2 mm thick (1.6 mm for doors) with frame work of angle iron/ channel/ bolted type construction duly compartmentalised for incomer,bus section , outgoings,cable alleys & CT,PT Ampere Meter ,Volt Meter , selector switches,Frequency Meter ,phase indicating lamps , energy Meter complete including cost of busbar supports,detachable cable gland plates,2 earthing terminals, internal wiring & fixing of separately supplied MCBs, MCCBs,panel mounted Changeover switch/SFUs, etc. as required but excluding cost of busbar strips,Ampere Meter, Volt Meter, Selector switch as per approved design & specification
13600
1142400
84
Supplying and fixing of LT Panel accessaries of approved make in existing LT Panel including connections etc.as required as per spececification Digital Ampere Meter with CTs with selector switch
14
25228
1802
Digital Volt Meter with selector switch & HRC fuse
14
28714
2051
Aluminium bus bar strips with PVC sleeves
940
146640
156
LED lamps
84
16296
194
Suppling and fixing of approved make step type Modular electronic, Fan regulator single/double module including connection etc. as required on existing board to 120 watt
816
367200
450
Supplying, Erection & Commissioning of 3 mtr. Long garden light pole having base pipe 114mm dia 1 meter long & 2 meter pipe 60mm dia. Total length 3 mtr. Base plate size 300x300x12mm with in built installation facility of MCB 4 pole will be installed on 600mm long 4 nb. Foundation bolt of 20mm thickness E.N. grade material. The Foundation bolt having 20mm thickness is 600mm long grouted in payal of alteast 350mm dia 750mm in depth in concrete mix of ratio 1:3:6 using 0.30 cum above 200mm ground level complete finished with fine plaster. (overall weight including of foundation bolt & Base plate will be 42 Kg.)
20
67200
3360
Earthing with G.I. Earth plate 600mm X 600mm X6mm thick including accessories and providing masonary encloser in cement mortor, cover plate having locking arrangment on the top and G.I. watering pipe 20mm dia 2.7 Meter long etc. (but without charcoal or coke and salt ) complete as required.
112
273168
2439
Add Extra for using salt and charcoal / coke for G.I. Plate or Copper plate earth electrode as required including excavation & refilling.
112
54320
485
Supplying and laying 25mm X 5mm G.I. strip at 0.5 Meter below ground level as strip earth electrode including soldering etc. as required.
896
52864
59
Providing and fixing 25mm X 4mm G.I. strip on surface or in
recessed/concealed for connection etc. as required.
576
62208
108
Supplying and erecting earth pit of minmum bore dia 150 mm size, approved make safe earthing electrode consiting pipe in pipe tecnologie as per IS 3043-1987 made of corriosion free GI pipes having outer pipe dia of 50 mm having 80-200 micron galvanising, inner pipe dia of 25 mm having 20-250 micron galavinsing, connection teriminal dia of 12 mm with constent OHMIC value sourrounded by highly conductiv compund with high charge disipation sutible for effective and maintence free earthing with 2 mtr. Pipe in normal soil with 25 kg (one bag) back filling compound
48
311040
6480
with 3 mtr. Pipe in normal soil with 50 kg (two bag) back filling compound
8
77760
9720
Providing back filling compund suitable for safe earthing device.
56
3528
63
Supply of support for overhead line RS joist / H-beam of I.S.
standard including welding, drilling of required hole etc. complete as required. H-Beam 152x152mm , Std weight 37.1 kg per meter
702
1270620
1810
Supply of steel tubular pole swaged type as per IS:2713-1980 Complete with baseplate and top Canopy 410 SP-8 - 7.50 meter
48
412656
8597
410 SP-29 - 9.00 meter
12
120288
10024
Supplying and drawing All Aluminium Alloy conductor (AAAC) of approved make confirming to IS 398-1979 Pt. IV, including binding at existing insulator, jointing, jumpering, tearing off, connecting etc. as required including clearing of obstacles (if any) 0.075 sq.inch / 48 sq.mm Alloy Aluminium Conductor
7.2
426081
59178
Supplying and drawing guard wire/earth wire/bearer wire 13mm2 (4mm. Dia) G.I. including stringing, binding at existing insulators or brackets, jointing, jumpering, connecting etc. as required and clearing of obstacles (if any)
7.2
64699
8986
Supplying and erection of guards for existing overhead lines as required including split insulator required as per specification: Cradle type
200
7800
39
Erection of steel tubular or steel rail pole or H-Beam of length exceeding 8 meters but not exceeding 10 meters in cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation, base padding & muffing including exacavation and refilling etc. as required.(4.55 bags of cement/cmt.)
12
20172
1681
Erection of steel tubular or steel rail pole or H-Beam of length exceeding 10 meters but not exceeding 13 meters in cement concrete 1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation , base padding & muffing including excavation and refilling etc. as required.(4.55 bags of cement/cmt.)
54
100170
1855
Supplying and erection of bow stay set complete (galvanized) with 19mm dia x 1.8m long stay rod, anchor plate of size 300mmx300mm x 6.4mm thimble stay clamps, turn buckle 19mmx60cm, 7/4.00mm dia G.I. stay wire and strain insulator etc. in cement concrete 1:3:6 ( 1 Cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling and also with 0.6m long brace of size 50mmx 50mmx6mm angle iron with 50mm dia pulley fixed at one end of the brace as required.
12
27360
2280
Supplying and fixing of 20mm dia. G.I. pipe A class 2 mtrs. Long for street light water tight bracket including bending to shape and wiring with 1.5sqmm W.P./PVC wire alongwith water proof controlling switch etc. as required.
60
55860
931
Supplying and erection of galvanised stay set for 11kV overhead line complete with 19/20mm dia x 1.8 meters long stay rod, anchor plate of size 45cm x 45cm x 7.5mm thick, thimble, stay clamps, turn buckle (20mmx 600mm), 7/4.00mm dia G.I. stay wire and 11kV strain insulator etc. in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm. nominal size) foundation including excavation and refilling etc. as required.
8
16304
2038
Supplying and erection of 11kV pin insulator complete with large steel head G.I. pin, nut, washer etc. as required.
162
33696
208
Supplying and erection of 11kV disc insulator for 11kV overhead lines with galvanised insulator fittings, ball and socket type, and complete with galvanised strain clamp, bolts, nuts washer etc. as required.
90
70200
780
Painting of pole bracket cable protecting pipe and its clamps in two coatings of All. enamel based primer as directed by Engineer-in-Charge. above 5 mtr. to 9 mtr.
540
21600
40
Supply of XLPE Insulated power cable (conforming IS-7098) 1100 Volt grade/Heavy duty power cable conforming to IS 1554-1100 Volts grade , 2 core /3½ core/4 coreISI MARKED with Alu. Stranded /solid conductor ARMOURED 3½ CORE 50 Sq.mm(XLPE)
1600
350400
219
70 Sq.mm(XLPE)
1
297
297
120 Sq.mm.(XLPE)
1
449
449
150 Sq.mm.(XLPE)
250
132750
531
300 Sq.mm.(XLPE)
30
30630
1021
ARMOURED 4 CORE 6 Sq.mm.(XLPE)
1830
170190
93
16 Sq.mm.(XLPE)
310
35030
113
CABLE LAYING Laying of one number PVC insulated and PVC sheathed power cable of 1:1 kV grade of size not exceeding 25 Sq.mm in the existing RCC Hume/Stone/Ware/G.I. pipe as required.
2140
68480
32
Laying of one number PVC insulated and PVC sheathed power cable of 1.1 kV grade of size exceeding 25 Sq.mm but not exceeding 400 Sq mm in the existing RCC/Hume Stoneware/G.I. Pipe as required.
1850
81400
44
Supplying, installing, testing and commissioning of 11/0.4 K.V. 3 Phase 50 Cycle oil immersed, naturally cooled, out door type transformer connected delta on H.T. side and star on L.T. side hand operated off load, Tap changer switch,above 100 kVA rating and diagram plate, two earthing terminal, lifting lugs, oil level guage, drain valve with plug, temperature not exceeding 50ºC on load, oil conservator with drain plug, oil filling hole with plug dehydrating silica gel breather, four unidirectional roller, arcing horns, explosion vent, terminal arrangement bushing on H.V. side and cable box on LV side, first filling of oil upto desired level and transformer installing on existing structure with all Required materials arrangements as required as per IS specification. Copper wound 200 kVA
3
815739
271913
315 kVA
1
431522
431522
Supplying installing and testing of AB isolating switch assembly set gang operated suitable for 11/0.4 KV, DP structure with brass part contacts, operating rod with required GI pipe, handle locking arrangement on On-Off position conforming to IS complete with required material and installing on existing structure to complete the job as required as per specification. 11 kv
4
25408
6352
Supplying, installing ,testing of 11 KV D.O. fuse assembly with brass part contact for 11/0.4 KV DP Structure set of 3 with fuse with barrel with required fuse element & other materials as per specification on existing D.P. structure as required.(set of 3nos.) 11kv
4
17620
4405
Supplying, installing, testing and commissioning of Lightning Arrestors (i) 11 KV Gapless, line type
12
5820
485
Supplying, installing, testing of earth Coil (coil of 115 turns of 50mm dia, and 2.5 Mtrs. Lead of 4 mm G.I wire.
114
27474
241
Supplying and installing Double wall corrugated pipes (DWC) of HDPE ( IS 14930 Part II -marked ) for cable laid under ground with necessary connecting sockets/ couplings,tees of same material and at required depth upto 90cm. below road/ground surface,including excavation, back filling with excavated material with ramming and making the surface good. 63.00mm outside dia.
1720
331960
193
200.00mm outside dia.
200
88600
443
Supply and fixing of LED tube rod comprising of LED tube with non integral / integral driver, 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy 80 lm/W. LED driver PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70.Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc.to complete the job. 2 Yrs Guarantee certificate from manufacturer. 1 X 5/8W Integral Tube fitting complete
140
51240
366
1 X 18/20/22W, Integral
700
307300
439
Supplying of integral post top lantern LED fitting comprises of copper dust finish cast aluminium spigot and spun aluminium canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting, open construction driver and accessories are wired up to terminal block. LED of 1 to 3W each assembled on single MCPCB, having color temp6500K & having 50000 burning hrs life with minimum @ L70, system lumen output should be minimum with efficacy80lm/W. LED driver PF 0.95 & surge protection 2KV. The colour rendering index of LED light should be more than70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer manadatory. i/c connection wire, testing etc. to complete thejob. 2 Yrs Guarantee certificate from manufacturer. 40 watt.
20
182860
9143
Supplying of street light with high power LED of 1 to 3 W each assembled on single MCPCB, system lumens output with efficacy110 lm/W. luminiare having color temp 6500K & 50000 burning hrs life with minimum @ L 70, The colour rendering index of LED light should be more than 70. Luminiare comprises of driver, PF 0.95 & surge protection 4KV. Housing made of pressure die cast aluminium with heat resistant flat glass / Lens type, IP66 protection. Submission LM 80-08 Form LED Source Manufacturer & LM79- 08 / IS16106 from NABL approved lab. Manufacturer manadatory i/c 50mm.dia G.I. Pipe bracket upto 2 mtr. long in required angle/shape, connection lead, testing etc to complete the job. 2 Yrs Guarantee certificate from manufacturer. 40W / 48W
48
175536
3657
60W
12
65832
5486
Supply, installation, testing and commissioning of 'Silent Type' diesel generating set comprising with diesel engine water cooled, Synchronous alternator, AMF control panel single/three phase, acoustic enclosure, battery with charger and related accessories including PCC 1:2:4 platform, incoming cable 10 mtr, earthing Cu/GI plate 2No/2No, exhaust pipe 'B' class with insulation as per CPWDspecification and CPCB - II Norms Water Cooled Supply, installation, testing and commissioning of diesel generating set three phase, water cooled with AMF control panel, 30 KVA, 415V.
2
731000
365500
Supply, installation, testing and commissioning of diesel generating set three phase, air cooled with AMF control panel 50 KVA, 415V.
1
538500
538500
NON SOR ITEMS (AS PER PWD SOR 2022 ) Supplying and fixing PVC as required confirming to IS 9537 part-3 ISI marked FRLS along with accessories on surface etc. as required PVC conduit 20 mm. (MMS)
4200
214200
51
PVC conduit 25 mm. (MMS)
700
46900
67
PVC conduit 32 mm. (MMS)
4200
428400
102
Supplying and fixing PVC as required confirming to IS 9537 part-3 ISI marked FRLS along with accessories in concealed system etc. as required PVC. conduit 20 mm (HMS)
2100
128100
61
PVC. conduit 25 mm (HMS)
1400
103600
74
PVC. conduit 32 mm (HMS)
1400
161000
115
Providing and fixing circular/hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S. sheet box by mean of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing.
816
73440
90
Supply, fabrication and erection of angle/channel/flat iron fitting for overhead line & sub-station etc such as 'D' bracket, cross arms, top clamp, 'V' cross arms, back/support clamp or other similar work etc. including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of aluminium paint as required as per specification.
4970
521850
105
Supplying and fixing of analog time switch for automatic ON - OFF street light of approved make in existing LT panel including connections etc. as required as per specification
2
5378
2689
Supplying and fixing of contractor 2 Pole rating 240/415V :for ON - OFF street light of approved make in existing LT panel including connections etc. as required as per specification 40 A
2
1664
832
Supply, installation, testing & commissioning of LT trivector energy meter, DLMS compliant category-A (for substation/feeder metering) , 3 phase 4 wire, 440 Volts, 5 Amp, accuracy class 0.5S with GSM(GPRS compatible) modem suitable for required C.T. 5A duly tested from electricity board with uPVC box .
2
29764
14882
Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/3½ core/4 core ISI marked with alu. stranded /solid conductor 150 sq. mm.
120
31920
266
300 Sq. Mm.
240
115920
483
Supply, installation, testing, commissioning, Putting into operation and final testing of automatic lift complete in the shaft well and pit constructed already las per CPWD specification including l-wtomatic rescue device (ARD), All standard equipmcnts, accessories and control equipments as per manufacturer's design and as per CPWD specification (Part III LIFTS) on turn key basis, Conforming to NBC / Statutory norms and fulfilling following requirements. (Make: Schindler, Mitsubishi, Otis, Orbis, Johnson, Thyssen Kruup) . (i) Type : Passenger lilt.
(ii) Load: As specified elsewhere from 4 passenger (272Kg) to 26 passenger (l768Kg) (for each person standard weight 68Kg.).
(iii) Speed : 1.00 Meter/sec.
(iv) Control : ACV3F, 32bit Microprocessor integrated serial communication control system with RMS (Remote monitoring system) / BMS (Building monitoring system) supportiJlg sollware.
(v) Motor/Machine: Pemlanent magnetic synchronous gearless motor. (vi) 0eeration : Simplex collective selective with/ without lift attendant.
(Vll) Total rise: About 3 mtrs. (Approx) two stops only.
(VIII) Landings : A11lloors Oll same side.
(ix) Floors Served : G + 1.
(x) Signals: Digital car position indicator, car travel direction indicator inside car & at all landings, Voice annunciator with suitable music shall be provide in the lift car.
(xi) Shaft size : As per manufacturer's design and as per CPWD specification (Part III LlFTS), Shaft to be constructed separately.
(xii) Guide rail: As per manufacturer's specification. (xiii) size: As. per mallufacturer's design and as per CPWD
specification (Part III Lifts).
(xiv) Car Entrance : As per manufacturer's design and as per CPWD specification (Part III Lifts)
(xv) Landing entrance : As per manufacturer's design and as per CPWD specification (Part III Lifts).
(xvi) Car door : S.S. (Stainless steel) hairline finish centre /Telescopic opening door with vision panel.
(xvii ) Landing door: S.S. (Stainless steel) Hairline finish centre / Telescopic opening door with vision panel.
(xviii) Door operation: Automatic electric power operated door, Full height infrared curtain with multiple criss/cross light beams.
(xix) Car interior : S.S. (Stainless steel) panel with hair line finish on all sides.
(xx) Car Hoor : Anti skid PVC flooring on heavy duty M S (Mild Steel) platform.
(xxi) Car ceiling & lighting: S. S. (Stainless steel) finishes with aesthetic appearance with LED ceiling lights.
(xxii) Car ventilation: Pressure fan / Blower fan (Car fan with automatic sleep timer shall be provided).
(xxiii) Emergency lighting in car: Battery operated emergency lighting in the lift car.
(xxiv) Intercom system: Battery operated Intercom system in lift car, machine room and ground floor/control room. (xxv) Emergency alarm : Battery operated alarm bell system in lift car & control room! Ground floor.
(xxvi) Position of machine room : Directly above the hoist-way.
(xxvii) Electric power supply : AC 415 V, 3 phase 50 Hz & AC 230 V 1 phase 50Hz terminated in machine room.
(xviii) Fire man switch : Fire man switch at machine room / Terninal landing.
(xxix) All car panel buttons and all floor switches must be with brail langnage as per lift act.
(xxx) Audio visual indication in the lift car showing overloading shall be provided such that doors kept open till excess load is removed.
(xxxi) Spring buffer/Hydraulic buffers shall be provided.
(xxxii) Mechanical over speed governor, door key holes in the floor doors shall be provided.
(xxxiii) Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit should be provided by the lift agency, along with the other steel structure works, foundations for the machines etc. (xxxiv) In the hoist way fascia plate shall be provided.
(xxxv) Permanent wiring in lift machine room and lift well with proper no. of light points, with fixtures, exhaust fan, plug points and 3 phase 440V power supply shall be made available by the department in lift shaft, machine room or at desired level.
(xxxvi) Car top safety barricade shall be provided.
(xxxvii) ARD (Automatic rescue device) : Solid state inbuilt automatic rescue device (ARD) for automatically rescues passengers trapped in the lift car in between (floors in the event of power failure. Automatic operation and immediate action in the event of mains failure capable to move the lift to the nearest landing, opens the automatic door of the lift car and floor.
Sealed maintenance free battery backup with automatic charging unit and auto changeover device on mains failure. Passenger capacity 8 Passenger (544Kg.)
14
20790000
1485000
add extra for higher speed for higher speed 1.5meter/sec (for 4-10 passengers)
14
1134000
81000
Add extra to item no. 44.1 for every additional floor beyond initial G+1 floor (additional stops beyond two stops) provides all necessary additional parts/equipments as per manufacturer's requirement. Cost for each additional floor : upto 9 stops (For 4-10 Passengers)
70
4725000
67500
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements