Rajmata Vijayaraje Scindia Krishi Vishwa Vidyalaya Tender

Reception Desk : (Size:- 2100 x 1000/450 x 800/1050 mm) Providing and fixing Desk made of 18mm thk. Plywood. storage as per details 450 mm c/c horizontally and 800 mm c/c vertically for shutter and shelves, 5 nos drawer on telescopic channel, Shutter will be made of 18 mm plyboard with 1mm thk. laminate on facia, top and sides. inner surface finish in 0.80 mm laminate , shutter will have auto / brass hinges, locks, handles, catchers etc. as required. All exposed surfaces & top of table shall be finished in 12 mm thick Corian/ Duco paint. space for C.P.U. with essential arrangements i.e. wire manager, switch board, printer etc. Also arrangements of Key Board drawer below main desk & vertical soft board above desk,L.E.D.lights in front elevation. All work shall be carried out as per detail drawing and instruction of Architect /Engineer In charge.

Conference Table : (Size:- 5700x1500x750 mm) Providing and fixing Conference Table made out from 18mm thk. Plywood. and finished with 1.0mm thk laminate finish as per design

CHAIR MED BACK /FIX PP ARM /SYNC 1 PT LOCK /NY CASTOR /NYLON BASE /MESH BACK /BLACK

LINEAR NON SHARING WS @1200LX550DX1200HT

CHAIR MEDIUM BACK /FIX PP ARM /CENTRE TILT MECH /NY CASTOR /NYLON BASE /MESH BACK /BLACK

Supply and Installation of Roller Blinds with head channel, traversing cord, and warranty etc as per manufacturer's specifications. Fabric to be as per approved sample.

Providing and fixing vinyl backing commercial grade leatherette wall paper of approved shade with recommended adhesive of approved make which have 100% washable, scratch resistance, peel proof, and fire retardant properties. Cost to include preparation on the punned surface for receiving the wall paper as per the manufacturer specification. basic Cost of wall paper Rs.1300 Sqmt

Repairing & making of existing Flush Doors, providing & fixing 4mm thk ply both side and finished in 1.0mm thk. laminate with all necessary hardware of good quality like door closure, door stopper, mortice handle lock, 300mm length D type handle, knob from inside & rib of door finished in melamine polish as per design.

Providing and applying textured paint of approved shade & colur of oikos or equivalent on internal wall surfaces wherever required at all heights to give an even and uniform shade, applied over 2 coats of primer and putty of approved make as per manufacturer specification fully to give a smooth and even surface including thoroughly brushing the surface free from water / mortar dropping and other foreign matter and sand papered smooth, complete per manufacturers specifications and as directed. Asian/ Oikos make (Basic Rate- 1400/- per sqm)

Carpet flooring- Carpet with style Tufted Textured loop with 100% Solution Dyed. Machine GUAGE : 1/12 WITH 4.MM +/- 0.5MM Pile Thickness and total thickness 7.00mm +/- 0.5mm . Tile Size 60cm x 60cm. Heavy duty with backing structure of GlasBac® or GlasBac®RE. Carpet should be Antimicrobial with Intercept® and Soil / Stain Protection. Carpet should be 22 to 24 ounce as per manufacture specification& green certified. (Basic Cost- 180/- per sft)

Providing and applying Luster paint on wall/ceiling for first quality sheen finish of approved shade and quality in 2 coats in fine roller finish. Rate including 2 coat of putty & primer

Supply & Installation of 12mm thick toughened plain manual swing glass door on floor spring with all anecessary patch fitting like corner patch, lock, 600mm SS Handle, bottom patch, top patch complete with seals

Providing and laying Artifical Grass flooring

Providing and fixing of 12mm thk. Exterior grade MDF 3D premium board panels on surface. The rate shall include all hardware, fittings, adhesives, beadings, lippings etc. preparing the surface of Duco paint. Providing and applying three coats of approved quality paints over required no. of coats of approved putty and primer and complete, finishing the work in rough surface as per dwg. Standard specifications with 1st grade paint of approved colour and shade. Moisture content should not be greater than 6.4%. As per architectural drawings as approved by consultant/ Engineer in charge. The rates are inclusive of all items in good condition nothing shall be paid extra separately.

Providing and fixing of Handmade paintings with high quality oil canvas and pigment as per approved theme and size. Artworks to have teakwood frames of 50mm thickness, melamine polished. Cost to include installation also. Sample to be approved by consultant/ Engineer.

Providing, fixing and fabricating M S Jali artwork screen of made of 4mm thk. M S sheet finished in approved steel primer nad metallic Duco paint complete as per the detail drawing. Cost also to include design and lazer cutting on the MS and MS supports.

Providing and fixing Exposed Brick work cladding on surface with 8-10mm groove. Groove to be filled with epoxy adhesives of approved colour and brand. Bricks shall be of uniform colour, size, shape. Bricks shall have smooth rectangular faces with sharp straight right angle edges. Maximum absorption shall not be more than 20% of its dry weight on immersion in water for 24 hours. Minimum crushing strength shall be 35 kg/sq. Rate including cladding to be finished with sealer.

Providing and fixing 5mm thk. Laquered glass of Saint Gobain/ Asahi make on 8mm thk. Ply

Providing and making M S & brick structure for Board room with Kavelu roof on top of height 3.5mtr

Providing & fixing outdoor natural wood benches of good quality

Providing & fixing outdoor natural wood table of good quality

LIGHT FITTINGS, Hanging light in Reception (Chandelier)- Basic cost- 20000/-

Providing and fixing LED backlit signage board made out from 3 mm thick coloured acrylic sheet and depth of the panel is 100 mm with, 1 year warranty As per architectural drawings as approved by consultant /Engineer in Charge.The rates are inclusive of all items including leads lift and necessary to complete the item in good condition nothing shall be paid extra sepreatlly unless specified. (450x3000)

Providing and fixing of signage of Stainless steel plate 304 grade Selam steel in16 gauge with letter & numbers with vinyl cut paste, with accessories and pasted on required surface with the help of aaproved adhesives ensuring proper alignment of plate As per architectural drawings as approved by consultant /Engineer in Charge.The rates are inclusive of all items including leads lift and necessary to complete the item in good condition nothing shall be paid extra sepreatlly unless specified.(Classroom/ conference/ service area/ lab etc.)

SOR ITEMS Providing and installation of acoustical wall panelling wood finish Slats made out of HDF board, Melamine / veneer laminated finish, perforated wooden grooved slats (2mm grooves @ 8mm centers) / (2mm Slats @16mm pitch) / (2mm grooves @ 32mm centers) / (2mm grooves @ 64mm centers), backlined with black acoustical fleece, tongue-groove edge for a seamless look, FR grade, of lineal dimension size 128mm x 2440mm x 16mm thick having density 1000Kg /m3, weight 12.8Kgs/m2 installed by using GI strut system.The GI strut system includes GI Cross channel having thickness 0.45mm, length 3600mm, knurled web 40mm, depth lOmm and equal flanges 15mm is fastened verticallylhorizontally at every 600mm centers. Aluminium core cross channel having thickness 0.5mm, length 2400mm, web 15mm and 27mm, depth 18mm and flanges of 7mm with suitable edge and centre brackets is then fixed perpendicular to the cross channel with the help of fasteners at every 400mm centers. Contractor to Provide expansion joints of 3mm at every 5mtsbothways.

Providing and installation of acoustic wall panelling consisting of Stretch NRC by using FR Grade NRC fabric of size 1700mm width, shall be stretched by using wooden base 10mm thick, rigid vinyl Stretch Tracks half. wrap/ full wrap 25mm and Midseam 25nun , strand, synth PF with requisite accessories and tools. Woodenbase 10mm is first installed on the wall along the marking lines with metal fasteners at 300mm centers . tracks to be installed on wooden base, by using Base tape (by removing the protective cover) for a true and continuous secure grip, and heavy-duty fasteners at 15mm centers on one/both sides of Stretch Tracks. Strand square edge magnesite bonded wood fiber panels of size 600x1200-xl5mm having density 400kg/m3, weight 4-8kg which is fixed to wall. Synth PF 10x1Omm thick adhered on strand panel by using Stick 7 adhesive. Fabric of width 1700mm is then aligned to the Stretch tracks by following the fabric thread line or pattern. The fabric is stuck on the Align Tape (by removing the protective cover) at the same time as being stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module width would be 1600mm.

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I

Providing and fixing 50 micron thick frosted heat/ light control film to window/door glazing as marketed under the brand name garware/3M or equivalent as approved