Raja Ramanna Centre For Advanced Technology Tender

Providing and fixing in position 70 mm thick tile base Partition- Internal Frame are made by 1.6mm thk. cold rolled close annealed powder coated Sections.Tiles (to be fixed on both faces) are made by 12mm. thick pre laminated particle board of make Associate/ Action Tessa confirming to IS 12823. Frame structure are fabricated by MIG/TIG welding Machine. Tiles are fitted by high strength PVC Dowel in PVC Insert with transition fit. provision of Slot for cabling and accessories. upper and side trim are 1mm thk. extruded powder coated aluminium section and Pole is 1.6 mm Thick Aluminium. (Using frame section 35 X 30 X 1.6 mm), configuration L-600mm, B-450 mm, H-150/300/600mm)

Providing and fixing in position executive chair of size-H:970-1070mm, Seat ht: 460-560mm, D: 680mm, W-600 mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Seat Hot pressed ply wood with steel T-Nuts for rigid fastening with PP cover. Back is moulded Bright Bar with stitched Mesh Cloth. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Lockable synchrony tilt mechanism and with Single piece Die castes PP arm rest adjustable with Poly poplin pad. Quality tapestry Polyster mesh board, colour Fabric. Moulded PU cushion of density not less than 50 kg/Cum.

Providing and fixing in position 10 seater meeting Table overall Size- Length-2700mm, Width-1200mm, Height-750mm,table top & legs made of 25mm thick Pre lamininated particle board of make Associate/ Action Tessa confirming to IS 12823, with 6 legs support, Front modesty panel made of 18mm thick Pre laminated particle board. All edges covered with 2mm thick PVC edge bend.

Providing and fixing in position Cafeteria table of Size: Width: 1200mm, Width: 600mm, Height: 750mm. 4 seater. Top made of 18mm thick rubber wood top, levellers at bottom. Frame made of 1.2 mm thk S.S. 304 tube of 19 mm dia, fitted with 18mm rubber wood top. The Under structure of table is made up of SS 202 tube of 1.25mm thickness.

Providing and fixing in position perforated steel seat without Arm of SIZE: Height: 810mm, Depth: 570mm, Width: 445mm: Perforated Steel Seat and back 1.2 mm thick fixed through neat welding with MS cold rolled close annealed tube structure of 19 mm dia and 1.2 mm thick tube. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.

Providing and fixing in position 22 Seater Conference Room Table overall Size- Length-6750mm, Width-2400mm, Height-750mm,Table Top and legs made of 25mm thifk Pre lamininated particle board of make Associate/ Action Tessa confirming to IS 12823, with 14 legs support Front modesty panel made of 18mm thick Pre laminated particle board. All edges covered with 2mm thick PVC edge bend.

Providing and fixing in position visitor chair of Size-Height: 930 mm, D: 450 mm, W: 470 mm padded with polyurethene foam. Anti lever CRCA frame powder coated on MS, fitted with Nylone molded back fitted with Mesh cloth. Armrest single Piece PP molded. Lumber support. Ergonomic design. Polyster Mesh board Colour Fabric, 50 density moulded PU cushion. 16 gauge tubular pipe with polypropelene Arm.

Providing & Fixing wooden Sliding Door Unit of Size- Height-1200mm x Width-900mm x Depth-400mm, with 2 adjustable shelfs. Body and Door and Top made of 18mm thick Pre-laminated Particle Board of make Associate/ Action Tessa confirming to IS 12823. Back 12mm thick PLPB. All edges covered with 2mm thick PVC edge bend .

Providing & fixing in position Industrial Locker- Size:- Height:1980mm, Width:915mm, Depth: 485mm (12 doors), Body part made-up of prime quality cold rolled close annealed Sheet of 22 Gauge thickness Use only MIG/TIG & Spot welding for fabrication. Individual compartment having individual door, with six levers superior quality lock board name Dorset mp330ni. Louvers are provided in doors for ventilation. Doors are mounted on steel hinge heavy brackets. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.

Providing and fixing Auditorium Stage 450mm high with steps. The top of stage is made up of 18mm BWP ply fixed on stucture made up of 600mm X 600mm grid of 18mm BWP ply vertical supports. Make of BWP Ply- Archidply/Ozone. Only Top area will be measured for measurement of stage.

Providing and fixing Ist ClassTeak Wood Skirting wherever required as per carved profile of size 75mm widex15mm thick duly melamine polished. Fixing details as per drawing and as directed by Engineer-in Charge.

Providing and fixing Ist ClassTeak Wood beading of size 25mmx15mm or as per profile duly melamine polished complete as per details, drawings and as directed by Engineer-in-Charge.

Structural steel work at all levels including supplying, cutting, fabricating, welding, erecting and fixing in position, including painting steel work with two coats of Synthetic enamel paint of approved shade and make over one coat of approved steel primer including preparing surfaces, filling with putty, scaffolding and cleaning etc. complete.

Structural steel channels ,ISMB up to and inclusive of 300mm, joists upto and inclusive of 350mm, angles, flats, tees, tubular, rectangular, square & circular hollow sections.

Providing and fixing in position Aluminum partitions, doors, windows, ventilators, louvers, fixed glazing, sliding windows, north light glazing, aluminum rough ground etc. with extruded and anodized (15 microns) to natural aluminum/Bronze colour, all type of aluminum sections, anodized aluminum beadings, anodised aluminum sheets manufactured to relevant IS codes and using minimum 2mm thick (or as specified) heavy sections INDAL/JINDAL/MAN or approved equivalent make including cost of pivots, approved door and window handles, EPDM gasket, PVC/Neoprene Gasket lining, stainless steel screws, mastic filling, weather strips, tower bolts, nuts, washers etc. as required and as per drawing etc. complete.

Providing and fixing 8.3 mm thick prelaminated wooden flooring (AC-3) of approved colour and make Rosseta/ pergo/ Vista/Solutia/ Action Tessa, including providing and fixing underlayer of supreme profile 2 mm polyurethene sheet with approved adhesive on levelled finished floor as per required pattern, levelling and finishing including providing and fixing Teak wood reducer/beading edge profile , termination profile, at ends, side edges at junctions of floor and wall including cost of all materials and labour required for complete work as per drawings, specifications and as directed by Engineer-in-Charge (Note: The finished surface shall be levelled with a margin of +/- 5 mm)

Providing,fabricating, installing and fixing in position 4mm thick aluminum composite panels of required size over aluminum frame work for masking, fascia,cladding ,etc. for linear as well as curvilinear shape for all heights and all levels etc.,consisting of aluminum section of size 50 x 25 x 2mm th. rect. tubes for frames including cutting the members to required size, fixing by aluminum angle cleats of size 50x50x2mm thick to horizontal and vertical members placed @ 600 mm & 1200 mm respectively, as per design requirement, fixing the aluminum frame secured to walls,floor and ceiling/hang to existing frame work. The frame members shall be cladded by using 4.0 mm thick prime quality aluminum composite panels approved shades made out of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick).manufactured by Durabuild, Alstone, Alstrong etc. Using 3M –VHB tape and sealent for fixing aluminum panels/glass, necessary filling up of gaps at junctions, top, bottom and all sides by glass sealent (No. 789 of Dow Corning or equivalent), all fittings and fixtures necessary for fixing of panels, screws/rivets, G.G.I. wire etc., making cut outs, fixing extra frame work and necessary arrangements for opening for supply/return air slit, lighting fixtures, etc. complete as per drawings, specifications and as directed by E.I.C.

Providing and fixing road sign board of 4mm thick plain/colour exterior quality premium ACP(Aluminium Composite Panel) Sheet of required size with Nikkalite Tm brand retro reflective English & Hindi letters of 75 mm ht at all size .the scope also ioncludes fixing of board to the existing adjustable and frame with stainless steel nut , bolt washers etc, required for holding the board at proper position and level as per specification and as directed by the Engineer in -charge.(SCP sheet shall be measured for calculating the area for payment)

Providing and fixing in position at all levels, elevation and heights frameless fixed glazing units using 12 mm thick toughened glass (clear/frosted/itched) , using structural grade weather sealent including providing and fixing in position 2nos. single leaf frameless glazed door (size 900-1000 mm X 2100 mm) of 12mm thick toughened glass using SS patch fittings of 'Dorma' make like Top Pivot XL-C 4014 , bottom patch XL-C 4013 , Top patch XL-C 4012 , floor pivot bearing 'Dorma' double action floor spring BTS 75 suitable for 12mm thick toughened glass including providing and fixing in position of size 25mm dia., 450mm long 'Dorma' design XLC-3003 stainless steel handles on bothside of shutter, including cost of all materials required to complete the work, labours, machinery, fabrication, tests, scaffolding if necessary, chasing in the floor, chipping of walls, beams, columns, rectification of plaster, painting if required, transportation etc., complete required for completion of works as per specifications and as directed by Engineer-in-Charge.