Raja Ramanna Centre For Advanced Technology Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Raja Ramanna Centre For Advanced Technology - RRCAT Tender
Civil And Construction
Building Construction
Eprocure
Opening Date7 Feb 2023
Closing Date3 Mar 2023
Tender Amount₹ 1,38,00,000
Costs
EMD
₹ 2,76,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_RRCAT_738938_1Bid Award Id
ViewTender No
RRCAT/85AI/CSD/C/3084 /51 dated 01.02.2023Tender Authority
Raja Ramanna Centre For Advanced Technology ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Earthwork excavation in foundations in soft rock by manual means upto a depth specified below including shoring and dewatering, if necessary and refilling around foundations and in plinth with selected excavated earth, in layers not exceeding 250mm thick, consolidating etc., and disposing of surplus earth within a distance of 50 metre lead as per drawings, specifications and as directed by the Engineer-in-Charge. (Depth of excavation shall be measured from the existing average ground level.)
-
-
-
0.00 metre to 1.50 metre below average G.L
50
-
-
Taking out DOORS, WINDOWS AND CLEARSTORY WINDOWS,shutters (steel or wood) including stacking within 50 metres lead etc. complete and as per drawings, specifications & as directed by the Engineer-in-charge.
-
-
-
of area 3.00 Sq M & below.
192
-
-
Dismantling Old Plaster or Skirting, racking out joints and cleaning the surfaces for plaster including scaffolding, disposal of debris to the dumping ground within 50 metres lead etc. complete as per drawings, specifications & as directed by the Engineer-in-charge.
217
-
-
Dismantling the existing structural steel work at all levels in M.S. channels, plates, angles, flats, R.S. joists, bolts etc. including scaffolding, cutting of structural steel members by gas cutting, removing the nuts, bolts etc. complete.
1.3
-
-
Dismantling the Mosaic/white glazed/Ceramic/Vitrified tiles /Kotah stone etc. in flooring/dado/skirting etc. including dismantling of bedding mortar, stacking of materials and disposing of debris within 50 metres lead etc. complete and as directed by Engineer-in-charge.
990
-
-
Demolishing plain cement concrete works by chiselling at all levels including scaffolding, disposal of materials within 50 metres lead etc. complete. and as directed by Engineer-in-charge.
70
-
-
Demolishing Reinforced cement concrete works by chiselling at all levels including scaffolding, cutting of reinforcement bars by gas cutting, straightening & stacking of steel bars and disposal of unserviceable materials within 50 metres lead etc. complete.
5
-
-
Demolishing brick work in cement mortar including scaffolding, stacking of serviceable material and disposal of unserviceable material within 50 mtr. lead as per drawings, specifications and as directed by the Engineer-in-Charge.
65
-
-
Disposing by mechanical transport ; the garbage/ Unserviceable materials consisting of debris, rubbish, packing boxes, Ac sheet, gypsum sheet, grass, serviceable/ nonserviceable items, doors, windows, partitions etc. from domestic house / office to the predetermined locations in the RRCAT campus with all leads at anywhere in RRCAT including loading, unloading, levelling, carrying by mechanical transport as required to maintain cleanliness around houses, parks and buildings in RRCAT campus including cost of all tools and tackles etc., complete as per specifications and as directed by Engineer-in-charge ( Carriage capacity shall be around 5.00 Cum.).
10
-
-
Lead charges for debris by mechanical transport anywhere in RRCAT CAMPUS, including loading, unloading, stacking/levelling etc. complete.
210
-
-
Note: The rates in respect of item this are applicable for the net quantity arrived at after making deduction for voids at 30% from corresponding stack/truck measurements.
-
-
-
Lead charges, by mechanical transport to anywhere in RRCAT Campus,including loading, unloading, stacking / levelling etc.comlpete as per drawing, specifications and as directed by Engineer-in-Charge.
-
-
-
For soil
950
-
-
Note : The rate is applicable for the net quantitities arrived at after making deductions for voids @ 20% in respect of soil from the corresponding stack / truck measurements.
-
-
-
Scraping the walls and concrete surfaces at all levels using machine grinders, sand papers, steel scrapers to remove the existing white/colour wash, distemper,oil paint, oil bound distemper, acrylic emlusion paint or water proof paint, including necessary scaffolding, cost of sand papers/ steel scrapers/machine grinder etc., removing loose dust and dirt with stiff brush and washing the surface with clean water etc. complete as per drawing, specifications and as directed by Engineer-in-charge.
3250
-
-
Brick work in cement mortar 1:6 using table moulded chimney bricks having a compressive strength not less than 40kg/cm² in superstructureat all level including double scaffolding, raking out joints, curing etc. complete as per specifications and as directed by the Engineer-in-Charge.
25
-
-
Half Brick masonry using table moulded chimney bricks having a compressive strength not less than 40 kg/cm² in C.M. 1:4 at all levels, including curing raking out joints, etc. complete as supports to kitchen platform, shelves, cupboards, flower beds etc. complete.as per drawings, specifications and as directed by the Engineer-in-Charge.
3
-
-
Construction of Granular sub base by providing coarse graded material as per grading, spreading in uniform layers on the prepared surface, mixing at optimum moisture content and compacting with vibratory roller/mechanical earth rammer to achieve the desired density complete.
-
-
-
For grading - I material (with 75mm and down size aggregates)
105
-
-
Cement concrete 1:3:6 using graded stone aggregate 40 mm max. size including consolidating, finishing, curing etc. complete excluding formwork as per specifications.
62
-
-
Cement plastering at all levels for internal walls/ceiling with cement mortar 1:4/1:5 finished smooth (steel trowel finish) so as to obtain smooth surface for painting over brick walls or concrete surfaces, including hacking of concrete surfaces, double scaffolding, making grooves,curing etc. complete as per drawings, specifications & as directed by the Engineer-in-charge.
-
-
-
15mm thick for internal walls in CM 1:4
70
-
-
Waterproof cement plaster 20 mm thick in cement mortar 1:3, with waterproofing compound @ 2% by weight of cement including double scaffolding, curing, hacking of concrete surfaces etc. complete as per drawings, specifications & as directed by the Engineer-in-charge.
65
-
-
Cement plastering 12 mm thick for internal walls, ceiling, with cement mortar 1:4 finished smooth with cement punning, over brick walls or concrete surfaces including hacking of concrete surfaces, scaffolding, curing, and one coat of cement wash etc. complete as per drawings, specifications & as directed by the Engineer-in-charge.
100
-
-
Providing and fixing in position first class double charge vitrified porcelain tiles conforming to IS:15622 of approved manufacturer of size 600mmx 600mm (thickness shall be as per manufactures's specifications) of approved color, pattern and design for flooring, skirting or dado laid in floor, wall of existing concrete or plastered surface over 20 mm thick cement mortar 1:3 bedding or fixed with approved quality adhesive (as per manufacturers specifications), jointed with spacer and pointed with matching epoxy sealent finished to levels, slope or plumb as required including cement mortar bedding, cutting of tiles to required size and curing, acid washing etc. complete all as per drawings, specifications & as directed by the Engineer-in-charge.
500
-
-
White/Coloured Glazed tile flooring/dado using 1st quality 6mm thick glazed tiles of size as mentioned below (SPARTEK /NITCO /BELL /KAJARIA /EURO /SOMANI) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) with necessary specials etc. over 20mm thick cement mortar 1:3 bedding, close jointed and pointed with matching white/coloured cement slurry and finished to levels slope or plumb as required including 20mm thick cement mortar 1:3 bedding, making good the surface before bedding, cutting of tiles, curing, acid washing etc. complete.
-
-
-
Coloured Dado using 300mm x 450 mm tiles.
415
-
-
Non Slippery Ceramic tile flooring/dado using 6mm thick matt finished ceramic tiles of sizes as mentioned below, 1st quality (SPARTEK /NITCO /BELL /KAJARIA /EURO /SOMANI) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) over 20mm thick cement mortar 1:3 bedding, close jointed and pointed with matching cement slurry using white cement pigment mixed with, finished to levels slope or plumb as required including 20mm thick cement mortar 1:3 bedding, making good the surface before bedding, cutting of tiles, curing, acid washing etc. complete.
-
-
-
In flooring with tiles of size 300x300x6mm.
85
-
-
Providing and laying/fixing in position minimu 16 mm thick machine polished granite slabs of approved colour and quality including machine/hand cut, polishing, buffing the edges all in line, level, (curvature corners if required) in cement mortar 1:3 with best workmanship, finishing, curing, complete in platforms, shelves, wash basin, cills, jambs, facias, treads and risers etc. complete. Note: S.S.screw at proper spacing shall be used to fixe the granite in addition to above where ever required.
-
-
-
Black, cherry/ruby red shade
80
-
-
Providing, fabricating, supplying and erecting in position both side laminated 35mm thick flush door shutters (excluding the thickness of lamination) in solid block board core, internally lipped, bonded with water proof type synthetic resin, hot pressed with commercial ply finish and decorative plastic laminate 1 mm thick on both faces including providing and fixing aluminum, CPMS fittings and fixtures as per drawing, heavy duty stainless steel hinges, locking arrangements and Godrej make door closure etc. with screws etc. complete.
75
-
-
Providing, fabricating, supplying and erecting factory made single/double leaf metal flush door insulated with polyurethane foam (density of PUF shall be 40kg/m³) of “Sen harvic/ABAQS/STAR METAL” make or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) consisting of 1.5 mm galvanised pressed steel frame of size 105mm x 57mm with suitable stiffeners and 1mm prime quality galvanised pressed steel shutter, 35mm thick shutter with necessary stiffeners for hardware, with applying a coat of two pack epoxy primer and two coats of polyurethane paint above etc. . complete including Supplying and fixing Mortise Dead lock manufactured by Godrej, having Model No. 8815 ( 7 lever) 2 way locking facility and key arrangement of both side, eye piece and safety chain,
-
-
-
providing & fixing aluminum/CPMS fittings, fixtures heavy duty Stainless steel hinges, Godrej make door closure and locking arrangements with screw and check for correctness of recesses and stiffening plates for all fittings & fixtures including the cost of grouting the hollow portion of door frame with cement concrete 1:2:4 etc. complete. Note: Fittings & fixtures shall be as indicated in tender drawing.. . Note : Fittings & fixtures shall be indicated in tender drawing.
-
-
-
35mm thick ( Main Door)
45
-
-
Providing and fixing factory made 30 mm thick pre laminated PVC door shutter (conforming to IS: 4020) with PVC door Frame (Choukhat) of make M/s. Rajshree/Sintex/Plastiwood or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) consisting of followings :
75
-
-
1. PVC door frame of size 50x47mm with wall thickness of 5mm, made out of extruded 5mm thick rigid PVC foam sheet, mitred ar corners and joined with 2nos. 150mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specifications and as directed by Engineer-in-Charge.
-
-
-
2. PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and of size 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles
-
-
-
& rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive & including all fittings, fixtures, etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. Note: Fittings and fixtures shall be as indicated in the tender drawing.
-
-
-
Providing and fixing in position aluminum doors, windows, ventilators, louvers, fixed glazing, sliding windows, north light glazing etc.
-
-
-
Providing and fixing in position anodized (min of grade AC5) aluminum louvered ventilators, using aluminum alloys extruded section as per approved make confirming to IS: 733 and IS: 1285. The outer frame shall be of extruded aluminum verticle and horizontal rectangular sections of minimum size 44.0x46.0x1.40 mm thick with adjustable louvers clips on both vertical side to hold and rotated 4 m thick bajri glass strip louvers, C.P. brass screws / stainless steel screws, mastic filling, nuts, washers, Rawl plugs, aluminum packing strips used for anchoring system as per the requirements, transportation, cost of all labours, scaffolding if necessary, machinery, tests, chipping of walls, beams, columns, rectification of plaster, painting if required etc. and as directed by EIC. Including providing and fixing bajri glass of 4.0 mm thickness etc. complete as directed by EIC.
17.5
-
-
Providing and fixing in position anodized (min of grade AC5) aluminum two track sliding windows, louvered ventilators etc., using aluminum alloys extruded section as per approved make confirming to IS: 733 and IS: 1285. The outer frame shall be of extruded aluminum vertical and horizontal rectangular sections of minimum size 61.00 x 24.00 x 0.84 mm thick, Bottom track sections of minimum size 61.00 x 31.00 x 1.50 thick, top & side members 61.00 x 31.00 x 1.50 mm thick and aluminum sections for frame of window sliding panels for top, bottom, verticle & interlocking members of minimum size 40.00 x 18.00 x 1.55 mm thick,
100
-
-
(part of 29.2) including providing and fixing concealed type heavy duty (metal - body, hook & bracket) locking arrangement of approved shade and make, heavy duty roller (smoother carbon steel bearing type), PVC liner, aluminum angle cleats, S.S bearings, C.P. brass screws / stainless steel screws, mastic filling, nuts, washers, Rawl plugs, aluminum packing strips used for anchoring system as per the requirements, transportation, cost of all labours, scaffolding if necessary, machinery, tests, chipping of walls, beams, columns, rectification of plaster, painting if required etc. and as directed by EIC. Including scaffolding if necessary, chipping of walls, beams, columns, rectification of plaster, painting if required. Including providing and fixing float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm) with edges champhered (wherever required) with PVC/Neoprene Gasket Lining etc. complete.
-
-
-
Providing and fixing in position anodized (min of grade AC5) aluminum side hung openable windows, ventilators etc., using aluminum alloys extruded section as per approved make confirming to IS: 733 and IS: 1285. The outer frame and inner frame for shutter shall be of extruded aluminum vertical and horizontal sections of Jindal 20509 and aluminum clip for shutter of window of openable panel on perimeter , including providing and fixing locking arrangement, handle of approved shade and make, PVC liner, aluminum angle cleats, C.P. brass screws / stainless steel screws, mastic filling, nuts, washers, Rawl plugs, aluminum packing strips used for anchoring system as per the requirements, transportation, cost of all labours, scaffolding if necessary, machinery, tests, chipping of walls, beams, columns, rectification of plaster, painting if required etc. and as directed by EIC.
17
-
-
(part of 29.4) Including providing and fixing float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm) with edges champhered (wherever required) with PVC/Neoprene Gasket Lining etc. complete.
-
-
-
Applying one coat of approved make primer over old painted surfaces, preparing the surfaces including removal of old paint, if any, sand papering, filling with putty wherever required, to have proper and leveled surface to receive finishing coats, scaffolding etc. complete.
-
-
-
Wood primer over wood surfaces
158
-
-
Red oxide zinc chromate primer over steel surfaces
117
-
-
Painting old plastered internal surfaces at all levels with two coats of Acrylic emulsion paint of approved shade and make over one coat of approved cement primer including preparing the surfaces, filling with full wall putty of approved make, scaffolding, sand papering for smooth finish, cleaning etc. complete as per drawing, specifications and as directed by Engineer-in-charge
-
-
-
Two finishing coats of Acrylic Emulsion paint
3250
-
-
Repainting of old painted surfaces at all levels with two coats of Acrylic Emulsion paint of approved shade and make including preparing the surfaces, removal of old loose paint if any , fungal growth,sepage patches, loose dust & dirt if any, sand papering, filling with putty as required, scaffolding and cleaning etc. treating the surface with antifungaul/waterproofing compound wherever reuired complete. as per drawing, specifications and as directed by Engineer-in-charge.
100
-
-
Repainting of old painted surfaces at all levels with two coats of flat oil paint paint of approved shade and make over one coat of approved primer wherever required, including preparing the surfaces, removal of old loose paint, if any, sand papering, filling with metal putty as required, scaffolding and cleaning etc. complete as per drawing, specifications and as directed by Engineer-in-charge
-
-
-
On steel surfaces
117
-
-
Painting Steel/Wood work at all levels with two coats of SYNTHETIC ENAMEL paint of approved shade and make over one coat of approved wood/steel primer including preparing surfaces, filling with putty, scaffolding, cleaning etc. complete as per drawing, specifications and as directed by the Engineer-in-Charge.
-
-
-
On Steel Surfaces
11
-
-
On wooden Surfaces
330
-
-
Repainting of old painted plastered surfaces at all levels with two coats of flat oil paint of approved shade and make over one coat of approved primer wherever required including preparing the surfaces, removal of old loose paint, if any, sand papering, filling with putty wherever required, scaffolding and cleaning etc. complete as per drawing, specifications and as directed by Engineer-in-charge
308
-
-
Painting the old painted exterior walls and roof at all levels with two coats of Snowcryl XT acrylic emulsion/APEX Ultima or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) of approved shade including preparing the surface by removing loose dust and dirt with stiff brush and washing the surface with clean water, treating the surface with antifungal chemical wherever required, filling with putty, scaffolding and cleaning etc. complete as per drawing, specifications and as directed by Engineer-in-charge
1200
-
-
Providing and fixing at all levels best quality stainless steel Kitchen Sink comprising of :
24
-
-
a. Best quality Stainless steel kitchen sink made of salem steel grade AISI-304 (18% Cromium/8% Nickel ) steel sink of bowl size 560 x 410mm x 254mm of 1mm thickness, " NIRALI" make (Grace plain large) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) supported on opening of RCC slab of platform, conforming to IS:13983. The Sink should include thin plastic film coating to protect against scratches during fixing etc.
-
-
-
b. One number suitable steel plastic combination in built waste coupling heavy quality of size 32mm diameter.
-
-
-
c. One number suitable heavy duty flexible PVC waste pipe of 32mm NB up to the top of floor trap.
-
-
-
Providing and fixing approved ORISSA PATTERN W.C. SUITE comprising of :
24
-
-
a. Orissa pattern W.C. best Indian make white or colour glazed vitreous chinaware, size 580 mm x 400mm with ‘P’ or ‘S’ trap, of Parryware OP.RIM (C0117)/Johnson Pedder (J83651C) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) conforming to IS: 2556
-
-
-
b. PVC low level flushing cistern 10 litres capacity with all fittings of Parryware slimeline(E8297)/Johnson Pedder E8107) or approved equivalent make (however approved make shall be allowed only if the mentioned make is not available from manufacturer.)
-
-
-
c. 32mm n.b. heavy quality P.V.C flush pipe of appropriate length with all PVC specials, etc. concealed in wall.
-
-
-
d.15 mm n.b. heavy quality P.V.C inlet connection with brass unions connected at ends.
-
-
-
e. 15mm n.b. screw down heavy quality, fancy variety C.P. brass stop cock of Jaguar (CON053KN)/Plumber (NEC-0507) or approved equivalent make (however approved make shall be allowed only if the mentioned make is not available from manufacturer.). conforming to IS:8931.
-
-
-
Providing & fixing best quality wash basin of size 550mm x 400 mm with plain rims, comprising of :
24
-
-
a. Best Indian make wash basin in white glazed vitreous chinaware of Johnson Pedder(J8470-SP/J8471-CTH)/Parryware (C-0406) conforming to IS:2566 Part IV or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) supported on suitable wall brackets and of size mentioned above.
-
-
-
b. One number heavy quality 15mm n.b. C.P. brass pillar cock with jam nut of easy clean variety of Jaguar( CON-011KN)/Plumber (DL-50116) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) conforming to IS: 1795
-
-
-
c. One number 15 mm n.b. heavy quality PVC inlet connection with brass union connection with brass solder joints at ends.
-
-
-
d. One number 15mm n.b. screw down heavy quality, fancy variety C.P. brass stop cock of Jaguar (CON053KN)/Plumber (NEC-0507) or approved equivalent make (however approved make shall be allowed only if the mentioned make is not available from manufacturer.) .
-
-
-
e. One number 32 mm n.b. heavy quality C.P. brass waste coupling with rubber plug and C.P. chain.
-
-
-
f. One number 32 mm C.P. BRASS heavy quality BOTTLE trap of approved make with extension piece and wall flange etc. complete of Dripless type.
-
-
-
Providing and fixing in position readily available mirror of size 600x450 mm made out of best quality indian glass of 5mm thick, manufactured by approved make mounted on PVC sheet backing with decorative PVC frame fixed in position with C.P. brass screws wth rawl plugs etc. all completeas per drawings, specifications, and as directed by the Engineer-in-Charge.
24
-
-
.Providing and fixing C.P. brass Towel rods of make Jaguar (ACN-111SM) or approved equivalent make (however approved make shall be allowed only if the mentioned make is not available from manufacturer.) of size 600mm long x 19±1mm with a wall flanges fixing on wall using C.P. brass screws, rawl plug etc all completeas per drawings, specifications, and as directed by the Engineer-in-Charge.
24
-
-
Providing & fixing in position at all heights C.P. brass COAT HOOK of Jaquar (ACN 1161 N)/ Plumber (U- 0915) or approved equivalent make (however approved make shall be allowed only if the mentioned make is not available from manufacturer.) at all heights including fixing the same in proper line & level with suitable C.P. Brass screws 25mm using rawl plug, making good the same complete as per specifications and as directed by Engineer-in-charge.
72
-
-
Providing & fixing best quality CP Brass SOAP DISH Holder of Jaquar (ACN 1161 N)/ Plumber (U- 0915) or approved equivalent make (however approved make shall be allowed only if the mentioned make is not available from manufacturer.) at all heights including fixing the same in proper line & level with suitable C.P. Brass screws using rawl plug, making good the same complete as per specifications and as directed by Engineer-in-charge.(plumber,
24
-
-
Providing and fixing decorative round shaped 100mm dia. ABS body Chrome plated SHOWER ROSE with 190mm long shower arm with rubit cleaning system design of Jaguar (O.H.S.1989)/Plumber (ITP4101) or approved equivalent make (however approved make shall be allowed only if the mentioned make is not available from manufacturer.) suitable for fixing on G.I. lines with built in ball joint for directional changes as per drawing, specifications & as directed by Engineer-in-Charge.
24
-
-
Providing and fixing heavy quality C.P. brass screw down 15mm n.b. Bib taps of Jaguar (CON-037KN)/Plumber(NEC202) or approved equivalent make (however approved make shall be allowed only if the mentioned make is not available from manufacturer.) on G.I. pipe line conforming to IS:781 as per drawing, specifications & as directed by Engineer-in-Charge
72
-
-
Providing & fixing at all levels heavy quality fancy variety approved make 15mm n.b. screw down C.P. brass long body bib taps on G.I./CPVC lines of Jaguar long body tap or approved equivalent make (however approved make shall be allowed only if the mentioned make is not available from manufacturer.)continental flange faucet or approved make easy clean variety with jam nut etc. as per drawing, specifications & as directed by Engineer-in-Charge
24
-
-
Providing and fixing heavy quality fancy variety C.P. brass screw down 15mm n.b. concealed type Stop cocks of Jaguar(ALD-083, FLR-5083 upper part)/ Plumber (AZT-2606, AZT-UPC upper part) or approved equivalent make (however approved make shall be allowed only if the mentioned make is not available from manufacturer.) confirming to IS:8931 on G.I. pipe line complete as per drawing, specifications and as directed by the Engineer-in-Charge.
72
-
-
Providing & fixing in position at all levels heavy pattern screw down gun metal GATE VALVES (Sant,Leader make) conforming to IS : 778 with hand wheel at top, including testing for 10 Kg/Sqcm pressure with clean & potable water with a minimum testing duration of two hours etc. complete as per drawings, specifications & as directed by the Engineer-in-charge
-
-
-
25 mm nb
24
-
-
Providing & fixing stainless steel look metallic shelf of length 550 mm,width 140 mm and height 70 mm of Plumber make Astral 0918 or Duet 0918 or Universal 0918 or approved equivalent make (however approved make shall be allowed only if the mentioned make is not available from manufacturer.) including 6 mm thick clear glass, two tier 6 mm railing, four pillars in a good looking pattern with diameter varying from 6 mm to 16 mm and two brackets such that whole assembly weighs not less than 300 grammes including fixing in position using rawl plugs, gutties, hardwares etc complete all as per specifications and as directed by the Engineer-in-charge.
24
-
-
Providing and fixing HDPE/PVC Floor trap of self cleansing design with 75mm outlet having a minimum water seal of 50mm with stainless steel grating on top of Astral/Supreme or approved equivalent make (however approved make shall be allowed only if the mentioned make is not available from manufacturer.) including necessary 1:2:4 cement concrete for embedding the trap etc. complete, conforming to IS : 3989 and as per specification and as directed by the Engineer-in-charge.
72
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of class SDR 11 of Supreme / Astral / KML Classic brands or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) having thermal stability for hot and cold water supply, including all CPVC plain & Brass threaded, S.S.Hax nipple of suitable length for Gyser inlet/outlet connection, flanze, extension nipple if required etc. i/c fixing the pipe with clamp at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing the joints complete as per drawing, specifications and as directed by the Engineer-in-Charge.Concealed work, including cutting chases and making good the walls etc.
-
-
-
Note.-The measurement shall be taken along the centre line of pipes including fittings, specials.
-
-
-
20 mm nb
120
-
-
25 mm nb
120
-
-
32 mm nb
24
-
-
Providing, laying, jointing, fixing and testing PVC rigid pipes of class B of Supreme or Astrol brands or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) ensuring thermal stability for hot or cold water,waste water, sewage, acids etc including all PVC plain & fittings including jointing with durable solvent including testing the pipes at a pressure of 6 kg per Sq cm etc. complete as per drawing, specifications and as directed by the Engineer-in-Charge.
-
-
-
80 mm nb
192
-
-
110 mm nb
48
-
-
150 mm nb
120
-
-
Providing & fixing in position curtain rods of 25mm diameter made of 1.25 mm (1.25 ± 0.03) mm thick stainless steel conduits resting on standard stainless steel looking curtain rod holder fixed on wall at spacing not exceeding 1.50m, having 2 nos. ball shaped stainless steel decorative formations ( of approved shape ) at both ends of each curtain rod such that whole assembly is suitable for holding medium size thick cloth curtains, fixed in position using required hardwares, rawl plugs etc. complete excluding curtain cloth but including the cost of all materials, rawl plugs, gutties, labours, taxes etc. complete as per specifications and as directed by Engineer-in-Charge.
142
-
-
REINFORCED CEMENT CONCRETE of M-20 grade at all levels using graded stone aggregate of 20mm max. size including machine mixing,, mechanical vibration, consolidation, finishing, curing etc. complete as per specifications but including shuttering, formwork and excluding steel reinforcement.
-
-
-
In foundations, footings, plinth beams & flooring.
245
-
-
Providing and placing in position REINFORCEMENT using TMT BARS of brand as specified in note no.(1) having minimum yield strength of grade Fe 500 confirming to IS 1786 for reinforced cement concrete work at all levels, including cutting, bending, fixing, tieing in position with 1.6 mm dia. soft drawn annealed binding wire, with chairs, legs, supports etc. complete including cost of transporting the bars from factory to required location at work site, cost of 1.6mm dia soft drawn annealed binding wire, watch & ward, insurance etc complete all as per drawing , specifications and as directed by Engineer-in-charge.
9.4
-
-
Note : 1.The steel reinforcement bars shall be brought by the contractore at terms & conditions specified.Fe 500D grade TMT bars manufactured in the brand name of Bansal,kesar gold,Magnum,Goel, Moira shall be permitted subject to furnishing of challans,valid test report issued by the manufacturer ,pertaining to elongation,yield strength,Bend rebend test etc.
-
-
-
Note: 2. Binding wire required for the work will have to be supplied by the contractor at their own cost and will not be measured for payment.
-
-
-
Note : 3. The contractor shall be solely respossible all the time for watch & ward of bars/binding wires etc at their own cost.
-
-
-
Note : 4. The contractor shall supply copy of Documentary evidence of purchase of steel, test certificate from the firms and also testing from third party if required to be arranged at no extra cost.
-
-
-
Structural steel work at all levels including supplying, cutting, fabricating, welding, erecting and fixing in position, including painting with a primer coat of approved steel primer as per drawing, specifications and as directed by Engineer-in-charge.
-
-
-
Structural steel channels and ISMB up to and inclusive of 300 mm joists upto and inclusive of 350 mm angles, flats and tees.
0.75
-
-
Note: 1. Structural steel conforming to IS: 2062.
-
-
-
2. The contractor shall supply copy of Documentary evidence of purchase of steel, test certificate from the firms and also testing from third party if required to be arranged at no extra cost.
-
-
-
3) Welding weights, connections, bolts and nuts shall not be measured for payment but the cost of which shall be deemd to have been included in the rate.
-
-
-
4) All holes will be made by drilling only. Gas cutting of holes will not be permitted.
-
-
-
5) Electrodes manufactured by M/s Advani Oerlikon, ESAB India, Oxygen and D&H SECHERON or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) only shall be used.
-
-
-
Construction of Inspection Chambers of internal clear dimension 900mm x 600mm in 200mm thick brick masonry in C.M 1:6 over a bed of 150mm thick 1:4:8 cement concrete foundation, plastering with C.M. 1:4, 20mm thick on inside, outside and all exposed surfaces, finished with a floating Coat of neat cement, 1:2:4 cement concrete for benching and channel finished with neat cement, brick carbelling at top to provide clear opening of 900mmx 450mm, providing and fixing C.I. steps weighing not less than 3.50 kgs/each at 300mm centre to centre etc. complete for depth of chamber not exceeding 900mm as per specification and as directed by Engineer-in-charge.
24
-
-
Providing & fixing in position best quality Heavy duty HDPE/PVC gully trap with 150 x 150mm square inlet and 100mm n.b.outlet conforming to IS 651 including embedding the trap in 1:4:8 cement concrete 150x150mm C.I. grading at top construction of brick masonry chamber 300x300mm (internal) in 200mm thick brick masonry, cement mortar 1:6 plastering with cement mortar 1:4, 20mm thick on inside, outside and exposed faces finished with floating coat of neat cement, providing and fixing C.I. frame and hinged cover weighing not less than 7 kg. Painting the grating frame cover with 2 coats of approved bitumastic paint etc., complete as per specifications, drawing and as directed by the Engineer-in-Charge.
24
-
-
Supplying,transporting & fixing to work site scaterred at various locations of RRCAT premises and placing in proper position locally available ready made Medium duty Pre-Cast R C C covers with frame generally as per IS 12592 of following specified clear size including minor cutting,dressing,alighning to fit properly levelled in existing man holes or Inspection Chambers or Gully trap Chambers including rigidly embedding the frame in 100 mm thick cement concrete 1:2:4 complete including cost of all materials, reinforcing wires, labourers, taxes, cess, transport , curing,wastages etc. complete all as per specifications and as directed by the Engineer-in-charge.
-
-
-
Rectangular shape 900 mm x 450 mm internal dimensions.
24
-
-
Painting steel work in two coats of Aluminium paint of approved shade and make over one coat of steel primer including preparing surfaces, scaffolding and cleaning etc. Complete
11.5
-
-
Structural steel work at all levels including supplying, cutting, fabricating, welding (MIG), Structural steel sections for making furniture like cot/bed etc. using angles, flats, tees, tubular, rectengular, square & circular hollow sections including powder coating etc. complete as per specifications, drawings & as directed by Engineer-in-Charge. The powder coating shall be of good quality anti rust treatment to ensure good adhesion and life of the coating.
4.7
-
-
Note: 1. All Structural pipe will confirm to IS 2062
-
-
-
2. The contractor shall supply copy of Documentary evidence of purchase of steel, test certificate from the firms and also testing from third party if required to be arranged at no extra cost.
-
-
-
3) Welding weights, connections, bolts and nuts shall not be measured for payment but the cost of which shall be deemd to have been included in the rate.
-
-
-
4) All holes will be made by drilling only. Gas cutting of holes will not be permitted.
-
-
-
5) Electrodes manufactured by M/s Advani Oerlikon, ESAB India, Oxygen and D&H SECHERON or equivalent (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) only shall be used. Welding shall be SMA welding.
-
-
-
6)The powder coating shall be of good quality anti rust treatment to ensure good adhesion and life of the coating.
-
-
-
Providing and fixing best quality 12 mm thick marine ply wood sheet (Conforming to IS 710) of make Ancor, Kitply, Greenply, National or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) in false ceiling masking, partition walls, fixing the plywood sheet to the existing wooden or MS frame work with suitable nails/screws, fevicol, cutting in proper line and level,forming necessary grooves as required including cutting the sheet to required size, making necessary opening around electrical fixtures, AC grills and trap doors in case of false ceiling, including removing existing worn out board or sheet and disposing the same at designated place including applying one coat of approved wood primer to the exposed surfaces etc.complete as per drawing, specifications and as directed by the Engineer-in-Charge
164
-
-
Providing & fixing/erecting in position G.I. Chain link fabric fencing of required height above ground level with 10 gauge G.I. chainlink mesh of size 50mm x 50mm, fixed to M.S. angles/RCC post including cost of providing & fixing 6 mm dia. G.I. J hooks, bolts, nuts, washers,staples and 6 mm dia. M.S. rods etc., providing and fixing longitudinly 3 rows of 8 gauge G.I. wires, .complete generally as per specifications and drawing and as directed by the Engineer-in-Charge.
90
-
-
Imp. Note - 8a) The bidder must possess valid EPF & ESIC registration. The bidders need to deposit EPF & ESIC with appropriate authority. The reimbursement for EPF & ESIC deposit shall not be made. 8b) The payment of wages to labourers should be made through bank. 8c) The bidder must possess sufficient manpower & other resources (as detailed in SGF ) required for the timely completion of work.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements