Raja Ramanna Centre For Advanced Technology Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Raja Ramanna Centre For Advanced Technology - RRCAT Tender
Civil And Construction
Building Construction
Eprocure
Opening Date7 Feb 2023
Closing Date3 Mar 2023
Tender Amount₹ 1,38,80,000
Costs
EMD
₹ 2,77,600Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_RRCAT_739078_1Bid Award Id
ViewTender No
RRCAT/85AI/CSD/C/3085/23/52 dated 01.02.2023Tender Authority
Raja Ramanna Centre For Advanced Technology ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
of area 3.00 Sq M & below.
235
-
-
of area beyond 3.00 Sq M
6
-
-
Dismantling Old Plaster or Skirting, racking out joints and cleaning the surfaces for plaster including scaffolding, disposal of debris to the dumping ground within 50 metres lead etc. complete as per drawings, specifications & as directed by the Engineer-in-charge.
407
-
-
Dismantling the Mosaic/white glazed/Ceramic/Vitrified tiles /Kotah stone etc. in flooring/dado/skirting etc. including dismantling of bedding mortar, stacking of materials and disposing of debris within 50 metres lead etc. complete and as directed by Engineer-in-charge.
740
-
-
Demolishing plain cement concrete works by chiselling at all levels including scaffolding, disposal of materials within 50 metres lead etc. complete. and as directed by Engineer-in-charge.
50
-
-
Demolishing Reinforced cement concrete works by chiselling at all levels including scaffolding, cutting of reinforcement bars by gas cutting, straightening & stacking of steel bars and disposal of unserviceable materials within 50 metres lead etc. complete.
3
-
-
Demolishing brick work in cement mortar including scaffolding, stacking of serviceable material and disposal of unserviceable material within 50 mtr. lead as per drawings, specifications and as directed by the Engineer-in-Charge.
37
-
-
Disposing by mechanical transport ; the garbage/ Unserviceable materials consisting of debris, rubbish, packing boxes, Ac sheet, gypsum sheet, grass, serviceable/ nonserviceable items, doors, windows, partitions etc. from domestic house / office to the predetermined locations in the RRCAT campus with all leads at anywhere in RRCAT including loading, unloading, levelling, carrying by mechanical transport as required to maintain cleanliness around houses, parks and buildings in RRCAT campus including cost of all tools and tackles etc., complete as per specifications and as directed by Engineer-in-charge ( Carriage capacity shall be around 5.00 Cum.).
9
-
-
Lead charges for debris by mechanical transport anywhere in RRCAT CAMPUS, including loading, unloading, stacking/levelling etc. complete.
137
-
-
Note: The rates in respect of item this are applicable for the net quantity arrived at after making deduction for voids at 30% from corresponding stack/truck measurements.
-
-
-
Lead charges, by mechanical transport to anywhere in RRCAT Campus,including loading, unloading, stacking / levelling etc.comlpete as per drawing, specifications and as directed by Engineer-in-Charge.
-
-
-
For soil
140
-
-
Note : The rate is applicable for the net quantitities arrived at after making deductions for voids @ 20% in respect of soil from the corresponding stack / truck measurements.
-
-
-
Scraping the walls and concrete surfaces at all levels using machine grinders, sand papers, steel scrapers to remove the existing white/colour wash, distemper,oil paint, oil bound distemper, acrylic emlusion paint or water proof paint, including necessary scaffolding, cost of sand papers/ steel scrapers/machine grinder etc., removing loose dust and dirt with stiff brush and washing the surface with clean water etc. complete as per drawing, specifications and as directed by Engineer-in-charge.
3500
-
-
Brick work in cement mortar 1:6 using table moulded chimney bricks having a compressive strength not less than 40kg/cm² in superstructureat all level including double scaffolding, raking out joints, curing etc. complete as per specifications and as directed by the Engineer-in-Charge.
3
-
-
Half Brick masonry using table moulded chimney bricks having a compressive strength not less than 40 kg/cm² in C.M. 1:4 at all levels, including curing raking out joints, etc. complete as supports to kitchen platform, shelves, cupboards, flower beds etc. complete.as per drawings, specifications and as directed by the Engineer-in-Charge.
42
-
-
Construction of Granular sub base by providing coarse graded material as per grading, spreading in uniform layers on the prepared surface, mixing at optimum moisture content and compacting with vibratory roller/mechanical earth rammer to achieve the desired density complete.
-
-
-
For grading - I material (with 75mm and down size aggregates)
75
-
-
Cement concrete 1:3:6 using graded stone aggregate 40 mm max. size including consolidating, finishing, curing etc. complete excluding formwork as per specifications.
55
-
-
Providing cement based waterproofing treatment to sunken by cleaning the concrete surfaces, giving injections to top slab as required with cement and approved waterproofing compound solution to fill up all inherent holes, voids honey-combs etc. in the concrete slab, setting brick bat coba in waterproof mortar 1:4 with necessary gradient for easy flow of water and continue the treatment along the inner faces of adjoining wall upto a height of 300 mm in the shape of vatas, with waterproof plaster 1:3 finished smooth with trovel in cement complete. (The treatment shall be tested by ponding water for a period of 10 days & dose of waterproofing compound solution is as per manufacturers specification).
-
-
-
Stages of treatment: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
-
-
-
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 63 mm size with 50% of cement mortar 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:4 (1 cement :4 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
-
-
-
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in charge.
-
-
-
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:3 (1 cement :3 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge
-
-
-
Note: 1. The waterproofing treatment is to be GUARANTEED for bone dry condition for a period of 10 years.
-
-
-
2. 3. An amount @ 10% of the value of the item shall be withheld by the department for a period of 10 years from the date of completion.
-
-
-
3.The measurement for payment shall be the entire area of terrace covered by the treatment measured between brick/concrete parapets without plaster and the area of vatas calculated by taking the length of vatas and the height above the finished level of the terrace/chajja.
-
-
-
65mm (average thickness) with cement finish
87
-
-
Cement plastering at all levels for internal walls/ceiling with cement mortar 1:4 finished smooth (steel trowel finish) so as to obtain smooth surface for painting over brick walls or concrete surfaces, including hacking of concrete surfaces, double scaffolding, making grooves,curing etc. complete as per drawings, specifications & as directed by the Engineer-in-charge.
-
-
-
15mm thick for internal walls in CM 1:4
130
-
-
Waterproof cement plaster 20 mm thick in cement mortar 1:3, with waterproofing compound @ 2% by weight of cement including double scaffolding, curing, hacking of concrete surfaces etc. complete as per drawings, specifications & as directed by the Engineer-in-charge.
70
-
-
Cement concrete flooring (IPS) 40mm thick cement concrete of mix 1:1.5:3 with graded stone aggregate of 10mm max. size, laid to proper level or slope in alternate bays, rammed and finished smooth including providing glass dividing strips of size 25mm x 3mm, curing etc. complete at all levels as per drawings, specifications and as directed by the Engineer-in-charge.
155
-
-
Providing and fixing in position first class double charge vitrified porcelain tiles conforming to IS:15622 of approved manufacturer of size 600mmx 600mm (thickness shall be as per manufactures's specifications) of approved color, pattern and design for flooring, skirting or dado laid in floor, wall of existing concrete or plastered surface over 20 mm thick cement mortar 1:3 bedding or fixed with approved quality adhesive (as per manufacturers specifications), jointed with spacer and pointed with matching epoxy sealent finished to levels, slope or plumb as required including cement mortar bedding, cutting of tiles to required size and curing, acid washing etc. complete all as per drawings, specifications & as directed by the Engineer-in-charge.
650
-
-
Coloured Glazed tile flooring/dado using 1st quality 6mm thick glazed tiles of size as mentioned below (SPARTEK /NITCO /BELL /KAJARIA /EURO /SOMANI) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) with necessary specials etc. over 20mm thick cement mortar 1:3 bedding, close jointed and pointed with matching white/coloured cement slurry and finished to levels slope or plumb as required including 20mm thick cement mortar 1:3 bedding, making good the surface before bedding, cutting of tiles, curing, acid washing etc. complete.
-
-
-
Coloured Dado using 300mm x 450 mm tiles.
355
-
-
Non Slippery Ceramic tile flooring/dado using 6mm thick matt finished ceramic tiles of sizes as mentioned below, 1st quality (SPARTEK /NITCO /BELL /KAJARIA /EURO /SOMANI) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) over 20mm thick cement mortar 1:3 bedding, close jointed and pointed with matching cement slurry using white cement pigment mixed with, finished to levels slope or plumb as required including 20mm thick cement mortar 1:3 bedding, making good the surface before bedding, cutting of tiles, curing, acid washing etc. complete.
-
-
-
In flooring with tiles of size 300x300x6mm.
1050
-
-
Providing and laying/fixing in position minimu 16 mm thick machine polished granite slabs of approved colour and quality including machine/hand cut, polishing, buffing the edges all in line, level, (curvature corners if required) in cement mortar 1:3 with best workmanship, finishing, curing, complete in platforms, shelves, wash basin, cills, jambs, facias, treads and risers etc. complete. Note: S.S.screw at proper spacing shall be used to fixe the granite in addition to above where ever required.
-
-
-
Black, cherry/ruby red shade
70
-
-
Other shades except Black or cherry/ruby red shade
220
-
-
Providing, fabricating, supplying and erecting in position both side laminated 35mm thick flush door shutters (excluding the thickness of lamination) in solid block board core, internally lipped, bonded with water proof type synthetic resin, hot pressed with commercial ply finish and decorative plastic laminate 1 mm thick on both faces including providing and fixing aluminum, CPMS fittings and fixtures as per drawing, heavy duty stainless steel hinges, locking arrangements and Godrej make door closure etc. with screws etc. complete.
93
-
-
Providing, fabricating, supplying and erecting factory made single/double leaf metal flush door insulated with polyurethane foam (density of PUF shall be 40kg/m³) of “Sen harvic/ABAQS/STAR METAL” make or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) consisting of 1.5 mm galvanised pressed steel frame of size 105mm x 57mm with suitable stiffeners and 1mm prime quality galvanised pressed steel shutter, 35mm thick shutter with necessary stiffeners for hardware, with applying a coat of two pack epoxy primer and two coats of polyurethane paint above etc. . complete including Supplying and fixing Mortise Dead lock manufactured by Godrej, having Model No. 8815 ( 7 lever) 2 way locking facility and key arrangement of both side, eye piece and safety chain,
-
-
-
providing & fixing aluminum/CPMS fittings, fixtures heavy duty Stainless steel pin & socket hinges, Godrej make door closure and locking arrangements with screw and check for correctness of recesses and stiffening plates for all fittings & fixtures including the cost of grouting the hollow portion of door frame with cement concrete 1:2:4 etc. complete. Note: Fittings & fixtures shall be as indicated in tender drawing.. . Note : Fittings & fixtures shall be indicated in tender drawing.
-
-
-
35mm thick ( Main Door)
12
-
-
Providing, fabricating, supplying and erecting factory made single/double leaf metal flush door insulated with polyurethane foam (density of PUF shall be 40kg/m³) of “Sen harvic/ABAQS/STAR METAL” make or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) consisting of 1.5 mm galvanised pressed steel frame of size 105mm x 57mm with suitable stiffeners and 1mm prime quality galvanised pressed steel shutter, 35mm thick shutter with necessary stiffeners for hardware, with applying a coat of two pack epoxy primer and two coats of polyurethane paint above etc. complete including providing & fixing aluminum/CPMS fittings, fixtures heavy duty Stainless steel pin & socket hinges and locking arrangements with screw and check for correctness of recesses and stiffening plates for all fittings & fixtures including the cost of grouting the hollow portion of door frame with cement concrete 1:2:4 etc. complete. Note: Fittings & fixtures shall be as indicated in tender drawing.
-
-
-
35mm thick ( Staircase door,Terrace door)
10.4
-
-
Providing and fixing factory made 30 mm thick pre laminated PVC door shutter (conforming to IS: 4020) with PVC door Frame (Choukhat) of make M/s. Rajshree/Sintex/Plastiwood or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) consisting of followings :
38
-
-
1. PVC door frame of size 50x47mm with wall thickness of 5mm, made out of extruded 5mm thick rigid PVC foam sheet, mitred ar corners and joined with 2nos. 150mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specifications and as directed by Engineer-in-Charge.
-
-
-
2. PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and of size 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles
-
-
-
& rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive & including all fittings, fixtures, etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. Note: Fittings and fixtures shall be as indicated in the tender drawing.
-
-
-
Providing and fixing in position aluminum doors, windows, ventilators, louvers, fixed glazing, sliding windows, north light glazing etc.
-
-
-
Providing and fixing in position anodized (min of grade AC 5) aluminum louvered ventilators, using aluminum alloys extruded section as per approved make confirming to IS: 733 and IS: 1285. The outer frame shall be of extruded aluminum verticle and horizontal rectangular sections of minimum size 44.0x46.0x1.40 mm thick with adjustable louvers clips on both vertical side to hold and rotated 4 m thick bajri glass strip louvers, C.P. brass screws / stainless steel screws, mastic filling, nuts, washers, Rawl plugs, aluminum packing strips used for anchoring system as per the requirements, transportation, cost of all labours, scaffolding if necessary, machinery, tests, chipping of walls, beams, columns, rectification of plaster, painting if required etc. and as directed by EIC. Including providing and fixing bajri glass of 4.0 mm thickness etc. complete as directed by EIC.
16.5
-
-
Providing and fixing in position anodized (min of grade AC 5) aluminum two track sliding windows, louvered ventilators etc., using aluminum alloys extruded section as per approved make confirming to IS: 733 and IS: 1285. The outer frame shall be of extruded aluminum vertical and horizontal rectangular sections of minimum size 61.00 x 24.00 x 0.84 mm thick, Bottom track sections of minimum size 61.00 x 31.00 x 1.50 thick, top & side members 61.00 x 31.00 x 1.50 mm thick and aluminum sections for frame of window sliding panels for top, bottom, verticle & interlocking members of minimum size 40.00 x 18.00 x 1.55 mm thick, including
147
-
-
(part of 28.2) providing and fixing concealed type heavy duty (metal - body, hook & bracket) locking arrangement of approved shade and make, heavy duty roller (smoother carbon steel bearing type), PVC liner, aluminum angle cleats, S.S bearings, C.P. brass screws / stainless steel screws, mastic filling, nuts, washers, Rawl plugs, aluminum packing strips used for anchoring system as per the requirements, transportation, cost of all labours, scaffolding if necessary, machinery, tests, chipping of walls, beams, columns, rectification of plaster, painting if required etc. and as directed by EIC. Including scaffolding if necessary, chipping of walls, beams, columns, rectification of plaster, painting if required. Including providing and fixing float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm) with edges champhered (wherever required) with PVC/Neoprene Gasket Lining etc. complete.
-
-
-
Providing and fixing in position anodized (min of grade AC5) wall span etc. with extruded and integrated aluminum sections as per approved make confirming to IS: 733 and IS: 1285 aluminum beading, PVC lining, CP brass / stainless steel screws, mastic filling, nuts, washers etc. complete including scaffolding if necessary, chipping of walls, beams, columns, rectification of plaster, painting if required. Vertical and horizontal section of wall spans shall be min 63 mm x 38 mm and of thickness minimum 1.85 mm. Snap beading shall be minimum 0.41 mm thick. Cleat angles shall be minimum 25 x 25 mm and thickness 2 mm. The spacing of verticle and horizontal sections shall be equally spaced as decided by Engineer in Charge.
8.15
-
-
Including providing and fixing in position 5mm thick glass.
Specifications of glass:- clear sheet glass/float glass of approved make and of following thickness fixed to aluminum doors with edges champhered (wherever required) with PVC/Neoprene Gasket Lining etc. complete. Wall spans fully glazed with 5mm thick glass, anodised aluminum (anodised transparent or dyed to required shade as directed by EIC as per IS: 1868, minimum anodic coating of grade AC 5).
-
-
-
Applying one coat of approved make primer over old painted surfaces, preparing the surfaces including removal of old paint, if any, sand papering, filling with putty wherever required, to have proper and leveled surface to receive finishing coats, scaffolding etc. complete.
-
-
-
Wood primer over wood surfaces
90
-
-
Red oxide zinc chromate primer over steel surfaces
121
-
-
Painting old plastered internal surfaces at all levels with two coats of Acrylic emulsion paint of approved shade and make over one coat of approved cement primer including preparing the surfaces, filling with full wall putty of approved make, scaffolding, sand papering for smooth finish, cleaning etc. complete as per drawing, specifications and as directed by Engineer-in-charge
-
-
-
Two finishing coats of Acrylic Emulsion paint
3500
-
-
Repainting of old painted surfaces at all levels with two coats of Acrylic Emulsion paint of approved shade and make including preparing the surfaces, removal of old loose paint if any, fungal growth,sepage patches, loose dust & dirt if any, sand papering, filling with putty as required, scaffolding and cleaning etc. treating the surface with antifungaul/waterproofing compound wherever reuired complete. as per drawing, specifications and as directed by Engineer-in-charge.
300
-
-
Repainting of old painted surfaces at all levels with two coats of flat oil paint paint of approved shade and make over one coat of approved primer wherever required, including preparing the surfaces, removal of old loose paint, if any, sand papering, filling with metal putty as required, scaffolding and cleaning etc. complete as per drawing, specifications and as directed by Engineer-in-charge
-
-
-
On steel surfaces
121
-
-
Painting Steel/Wood work at all levels with two coats of SYNTHETIC ENAMEL paint of approved shade and make over one coat of approved wood/steel primer including preparing surfaces, filling with putty, scaffolding, cleaning etc. complete as per drawing, specifications and as directed by the Engineer-in-Charge.
-
-
-
On Steel Surfaces
305
-
-
Repainting of old painted plastered surfaces at all levels with two coats of flat oil paint of approved shade and make over one coat of approved primer wherever required including preparing the surfaces, removal of old loose paint, if any, sand papering, filling with putty wherever required, scaffolding and cleaning etc. complete as per drawing, specifications and as directed by Engineer-in-charge
191
-
-
Painting the old painted exterior walls and roof at all levels with two coats of Snowcryl XT acrylic emulsion/APEX Ultima or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) of approved shade including preparing the surface by removing loose dust and dirt with stiff brush and washing the surface with clean water, treating the surface with antifungal chemical wherever required, filling with putty, scaffolding and cleaning etc. complete as per drawing, specifications and as directed by Engineer-in-charge
3500
-
-
Providing and fixing at all levels best quality stainless steel Kitchen Sink comprising of :
6
-
-
a. Best quality Stainless steel kitchen sink made of salem steel grade AISI-304 (18% Cromium/8% Nickel ) steel sink of bowl size 560 x 410mm x 254mm of 1mm thickness, " NIRALI" make (Grace plain large) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) supported on opening of RCC slab of platform, conforming to IS:13983. The Sink should include thin plastic film coating to protect against scratches during fixing etc.
-
-
-
b. One number suitable steel plastic combination in built waste coupling heavy quality of size 32mm diameter.
-
-
-
c. One number suitable heavy duty flexible PVC waste pipe of 32mm NB up to the top of floor trap.
-
-
-
Providing & fixing EUROPEAN WATER CLOSET suite comprising of :
12
-
-
a. White vitreous china pedestal type water closet (European type W.C. pan) in vitreous Chinaware with internal 'P' or 'S' trap conforming to IS: 2556 of Jonson pedder Strap white(J8312)/Parryware PETITE(C0287) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.).
-
-
-
b. PVC, low level flushing cistern 10 litres capacity of Parryware slimeline(E8297)/Johnson Pedder E8107) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) mounted brackets with double syphonic pattern and all internal fittings conforming to IS: 7231.
-
-
-
c. 15mm n.b. heavy quality P.V.C. inlet connection with brass unions connected at ends.
-
-
-
d. 15mm n.b. screw down heavy quality, fancy variety C.P. brass two way angle cock of Jaquar (CON053KN)/Plumber (NEC-0507) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) conforming to IS:8931.
-
-
-
e. Solid plastic heavy quality seat with lid of Parryware (E8300 soft close)/Johnson Pedder(E8315) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) and colour with C.P brass pillar hinges, conforming to IS :2548 (Part I and II)
-
-
-
f. Health faucet (Hand Shower) with 8mm dia. 1.2 metre long Flexible tube & wall hook of Jaquar(ALD-573)/Plumber(MTL-1904) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.).
-
-
-
g. Jet spray (butterfly) with 1.00m long heavy quality PVC tube & nozzle of Plumber(U-1905 )/Jaquar or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.).
-
-
-
Providing and fixing approved ORISSA PATTERN W.C. SUITE comprising of :
6
-
-
a. Orissa pattern W.C. best Indian make white or colour glazed vitreous chinaware, size 580 mm x 400mm with ‘P’ or ‘S’ trap, of Parryware OP.RIM (C0117)/Johnson Pedder (J83651C) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) conforming to IS: 2556
-
-
-
b. PVC low level flushing cistern 10 litres capacity with all fittings of Parryware slimeline(E8297)/Johnson Pedder E8107) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.)
-
-
-
c. 32mm n.b. heavy quality P.V.C flush pipe of appropriate length with all PVC specials, etc. concealed in wall.
-
-
-
d.15 mm n.b. heavy quality P.V.C inlet connection with brass unions connected at ends.
-
-
-
e. 15mm n.b. screw down heavy quality, fancy variety C.P. brass stop cock of Jaquar (CON053KN)/Plumber (NEC-0507) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) conforming to IS:8931.
-
-
-
Providing and fixing C.P. brass Toilet paper roll Holder of Jaquar(ACR-CHR-1153)/Plumber(ER-0916) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) fixing on wall using C.P. brass screws, rawl plug etc all complete as per specifications and as directed by Engineer-in-charge.
12
-
-
Providing & fixing best quality wash basin of size 550mm x 400 mm with plain rims, comprising of :
18
-
-
a. Best Indian make wash basin in white glazed vitreous chinaware of Johnson Pedder(J8470-SP/J8471-CTH)/Parryware (C-0406)or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) conforming to IS:2566 Part IV supported on suitable wall brackets and of size mentioned above.
-
-
-
b. One number heavy quality 15mm n.b. C.P. brass pillar cock with jam nut of easy clean variety of Jaquar( CON-011KN)/Plumber (DL-50116) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) conforming to IS: 1795
-
-
-
c. One number 15 mm n.b. heavy quality PVC inlet connection with brass union connection with brass solder joints at ends.
-
-
-
d. One number 15mm n.b. screw down heavy quality, fancy variety C.P. brass stop cock of Jaquar (CON053KN)/Plumber (NEC-0507) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.).
-
-
-
e. One number 32 mm n.b. heavy quality C.P. brass waste coupling with rubber plug and C.P. chain.
-
-
-
f. One number 32 mm C.P. BRASS heavy quality BOTTLE trap of approved make with extension piece and wall flange etc. complete of Dripless type.
-
-
-
Providing and fixing in position readily available mirror of size 600x450 mm made out of best quality indian glass of 5mm thick, manufactured by approved make mounted on PVC sheet backing with decorative PVC frame fixed in position with C.P. brass screws wth rawl plugs etc. all completeas per drawings, specifications, and as directed by the Engineer-in-Charge.
18
-
-
.Providing and fixing C.P. brass Towel rods of make Jaquar (ACN-111SM) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) of size 600mm long x 19±1mm with a wall flanges fixing on wall using C.P. brass screws, rawl plug etc all completeas per drawings, specifications, and as directed by the Engineer-in-Charge.
18
-
-
Providing & fixing in position at all heights C.P. brass COAT HOOK of Jaquar (ACN 1161 N)/ Plumber (U- 0915) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) at all heights including fixing the same in proper line & level with suitable C.P. Brass screws 25mm using rawl plug, making good the same complete as per specifications and as directed by Engineer-in-charge.
42
-
-
Providing & fixing best quality CP Brass SOAP DISH Holder of Jaquar (ACN 1161 N)/ Plumber (U- 0915) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) at all heights including fixing the same in proper line & level with suitable C.P. Brass screws using rawl plug, making good the same complete as per specifications and as directed by Engineer-in-charge.
18
-
-
Providing and fixing decorative round shaped 100mm dia. ABS body Chrome plated SHOWER ROSE with 190mm long shower arm with rubit cleaning system design of Jaquar (O.H.S.1989)/Plumber (ITP4101) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) suitable for fixing on G.I. lines with built in ball joint for directional changes as per drawing, specifications & as directed by Engineer-in-Charge.
15
-
-
Providing and fixing heavy quality C.P. brass screw down 15mm n.b. Bib taps of Jaquar (CON-037KN)/Plumber(NEC202) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) on G.I. pipe line conforming to IS:781 as per drawing, specifications & as directed by Engineer-in-Charge
51
-
-
Providing & fixing at all levels heavy quality fancy variety approved make 15mm n.b. screw down C.P. brass long body bib taps on G.I./CPVC lines of Jaquar long body top continental flange faucet or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) easy clean variety with jam nut etc. as per drawing, specifications & as directed by Engineer-in-Charge
6
-
-
Providing and fixing heavy quality fancy variety C.P. brass screw down 15mm n.b. concealed type Stop cocks of Jaquar(ALD-083, FLR-5083 upper part)/ Plumber (AZT-2606, AZT-UPC upper part) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) confirming to IS:8931 on G.I. pipe line complete as per drawing, specifications and as directed by the Engineer-in-Charge.
42
-
-
Providing & fixing in position at all levels heavy pattern screw down gun metal GATE VALVES (Sant,Leader make) conforming to IS : 778 with hand wheel at top, including testing for 10 Kg/Sqcm pressure with clean & potable water with a minimum testing duration of two hours etc. complete as per drawings, specifications & as directed by the Engineer-in-charge
-
-
-
20 mm nb
6
-
-
25 mm nb
9
-
-
Providing & fixing stainless steel look metallic shelf of length 550 mm,width 140 mm and height 70 mm of Plumber make Astral 0918 or Duet 0918 or Universal 0918 or approved equivalent quality make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) including 6 mm thick clear glass, two tier 6 mm railing, four pillars in a good looking pattern with diameter varying from 6 mm to 16 mm and two brackets such that whole assembly weighs not less than 300 grammes including fixing in position using rawl plugs, gutties, hardwares etc complete all as per specifications and as directed by the Engineer-in-charge.
9
-
-
Providing and fixing HDPE/CPVC Floor trap of self cleansing design with 75mm outlet having a minimum water seal of 50mm with stainless steel grating on top of Astral/Supreme or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) including necessary 1:2:4 cement concrete for embedding the trap etc. complete, conforming to IS : 3989 and as per specification and as directed by the Engineer-in-charge.
36
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of class SDR 11 of Supreme / Astral / KML Classic brands or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) having thermal stability for hot and cold water supply, including all CPVC plain & Brass threaded, S.S.Hax nipple of suitable length for Gyser inlet/outlet connection, flanze, extension nipple if required etc. i/c fixing the pipe with clamp at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing the joints complete as per drawing, specifications and as directed by the Engineer-in-Charge.Concealed work, including cutting chases and making good the walls etc.
-
-
-
Note.-The measurement shall be taken along the centre line of pipes including fittings, specials.
-
-
-
20 mm nb
147
-
-
25 mm nb
97
-
-
32 mm nb
22
-
-
Providing, laying, jointing, fixing and testing PVC rigid pipes of class B of Supreme or Astrol brands or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) ensuring thermal stability for hot or cold water,waste water, sewage, acids etc including all PVC plain & fittings including jointing with durable solvent including testing the pipes at a pressure of 6 kg per Sq cm etc. complete as per drawing, specifications and as directed by the Engineer-in-Charge.
-
-
-
80 mm nb
153
-
-
110 mm nb
95
-
-
Applying at all levels TWO coats of Cement Slurry duly modified with Acrylic Polymer of Hydrocrete of M/s CIPY Polyurethanes Pvt. Ltd. or Tepecrete of M/s CICO india ltd. or STP Ltd. or Pidicrete of DR. FIXIT or M/s SIKA or M/s FOSROC India ltd. or approved polymers in one or two part system including removing fungal growth if any, surface preparation , instant plugging of visible source of ingress using approved equivelent polymers of above listed companies, penetrable grouting of surface using mixing of cement and approved Acrylic Polymer @ 50 % by weight of cement for application in each coat (base coat with ordinary cement and top coat with white cement of approved brand), glass fibre mat of min. 45 gsm ,curing each coat for at last three days , scaffolding , cost of all materials like cement, Cost of colour pigment mixed with acrylic polymer, forapproved polymer in one part or two part system ,
104
-
-
water proofing compound , approved equivalent grouts , cleaning items etc. requisite labourers, tools and tackles, testing by ponding etc. complete as per drawing, generally as per Manufacturer's specifications/recommendation and as directed by Engineer- in- Charge.
-
-
-
Note:- 1) The waterproofing treatment is to be guaranteed for bone dry condition for a period of 05 years.
-
-
-
2) The measurement for payment shall be the actual superficial area covered by the treatment. Edges shall be treated but shall not be measured seperately.
-
-
-
3) An amount @ 10% of the gross value of the item shall be with held by the department for the period of 05 years from the date of completion.(as per service guarantee)
-
-
-
Providing and fixing at all levels M.S. Guard Bars with M. S. Flat/angle at required size,shape and spacing in windows including cutting to required size, making holes in concrete/ brick walls and making good the same to the original conditions etc. and painting with one coat of approved steel primer as per drawing, specifications and as directed by Engineer-in-charge. etc. complete
1.51
-
-
Note.- Welding weights, connections, bolts and nuts shall not be measured for payment but the cost of which shall be deemd to have been included in the rate.
-
-
-
Providing & fixing in position curtain rods of 25mm diameter made of 1.25 mm (1.25 ± 0.03) mm thick stainless steel conduits resting on standard stainless steel looking curtain rod holder fixed on wall at spacing not exceeding 1.50m, having 2 nos. ball shaped stainless steel decorative formations ( of approved shape ) at both ends of each curtain rod such that whole assembly is suitable for holding medium size thick cloth curtains, fixed in position using required hardwares, rawl plugs etc. complete excluding curtain cloth but including the cost of all materials, rawl plugs, gutties, labours, taxes etc. complete as per specifications and as directed by Engineer-in-Charge.
99
-
-
REINFORCED CEMENT CONCRETE of M-20 grade at all levels using graded stone aggregate of 20mm max. size including machine mixing,, mechanical vibration, consolidation, finishing, curing etc. complete as per specifications but including shuttering, formwork and excluding steel reinforcement.
-
-
-
In foundations, footings, plinth beams & flooring.
50
-
-
Providing and placing in position REINFORCEMENT using TMT BARS of brand as specified in note no.(1) having minimum yield strength of grade Fe 500 confirming to IS 1786 for reinforced cement concrete work at all levels, including cutting, bending, fixing, tieing in position with 1.6 mm dia. soft drawn annealed binding wire, with chairs, legs, supports etc. complete including cost of transporting the bars from factory to required location at work site, cost of 1.6mm dia soft drawn annealed binding wire, watch & ward, insurance etc complete all as per drawing , specifications and as directed by Engineer-in-charge.
2.8
-
-
Note : 1.The steel reinforcement bars shall be brought by the contractore at terms & conditions specified.Fe 500D grade TMT bars manufactured in the brand name of Bansal,kesar gold,Magnum,Goel, Moira shall be permitted subject to furnishing of challans,valid test report issued by the manufacturer ,pertaining to elongation,yield strength,Bend rebend test etc.
-
-
-
Note: 2. Binding wire required for the work will have to be supplied by the contractor at their own cost and will not be measured for payment.
-
-
-
Note : 3. The contractor shall be solely respossible all the time for watch & ward of bars/binding wires etc at their own cost.
-
-
-
Note : 4. The contractor shall supply copy of Documentary evidence of purchase of steel, test certificate from the firms and also testing from third party if required to be arranged at no extra cost.
-
-
-
Structural steel work at all levels including supplying, cutting, fabricating, welding, erecting and fixing in position, including painting with a primer coat of approved steel primer as per drawing, specifications and as directed by Engineer-in-charge.
-
-
-
Structural steel channels and ISMB, joists, angles, flats and tees etc. of minimum grade Fe250.
3.5
-
-
Note: 1. Structural steel conforming to IS: 2062.
-
-
-
2. The contractor shall supply copy of Documentary evidence of purchase of steel, test certificate from the firms and also testing from third party if required to be arranged at no extra cost.
-
-
-
3) Welding weights, connections, bolts and nuts shall not be measured for payment but the cost of which shall be deemd to have been included in the rate.
-
-
-
4) All holes will be made by drilling only. Gas cutting of holes will not be permitted.
-
-
-
5) Electrodes manufactured by M/s Advani Oerlikon, ESAB India, Oxygen and D&H SECHERON or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) only shall be used.
-
-
-
Providing & fixing in position best quality Heavy duty HDPE/PVC gully trap with 150 x 150mm square inlet and 100mm n.b.outlet conforming to IS 651 including embedding the trap in 1:4:8 cement concrete 150x150mm C.I. grading at top construction of brick masonry chamber 300x300mm (internal) in 200mm thick brick masonry, cement mortar 1:6 plastering with cement mortar 1:4, 20mm thick on inside, outside and exposed faces finished with floating coat of neat cement, providing and fixing C.I. frame and hinged cover weighing not less than 7 kg. Painting the grating frame cover with 2 coats of approved bitumastic paint etc., complete as per specifications, drawing and as directed by the Engineer-in-Charge.
6
-
-
Filling under floors, with screened selected Sand including spreading, watering, ramming consolidating, finishing to levels etc. complete
10
-
-
Providing & fixing in true horizontal level M/F suspended false ceiling (FR-120 min) system manufactured by M/s Saint-Gobain Gyproc India using Gypsteel Ultra perimeter channels (27mm web and 20&30mm flange) fixed to wall with rawl plug and screws, at 610mm centres along the perimeter of ceiling, intermediate channels(45mm web and 15mm eac flange) from the soffit at 900mm centre with ceiling angle( 25x10mm,0.55mm thick) fixed to soffit at 1220mm c/c with GI cleat and steel expansion fasteners to form a grid of 900mm x 1220mm. Ceiling section (51.5mm web and 26mm each flange)fixed to intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457.5mm centres. Single layers of 15mm tapered edge Gyproc Fireline fixed to ceiling section with screws at 230mm centres.
-
-
-
Square and tapered edges of the boards to be jointed and finished flush look including filling and finishing with jointing compound, paper fibar tape and two coats of drywall top coat etc. complete as per drawing, specifications and as directed by Engineer-in-charge.
-
-
-
False ceiling/masking suspended by anchor rods fixed with anchor fasteners and 15mm tapered edge Single layers Gyproc Fireline board panel on one side.
380
-
-
Providing and fixing in position '84R' 'LUXALON' aluminum lineal panel ceiling manufactured by M/s Hunter Douglas India Pvt. Ltd. or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) ceiling system comprising of 84 mm wide x 16 mm deep perforated panelsroll formed out of 0.50 mm thick made of enameled aluminum. Panel lenght upto 6.00 M approx., coil coated on a continuous paint line, double backed and roll formed from double backed enameld corrosion resistant alluminum alloy HD 5050( Al. Mg) for higher strength and good roll forming characteristics. The panel shall be fixed on roll formed carriers of size 32 mm wide x 39 mm deep made out of 0.95 mm thick aluminum alloys AA 5052 stove enameled black with prongs to hold panels in a module of 100 mm ( 16 mm gap between panels) at max. 1.20 M c/c , carriers to be suspended from roof
40
-
-
by 4 mm dia. galvanised steel wire hangers with special adjustable clops made of spring steel at max. 1.20 M c/c. Hangers to be fixed from roof by ' J' hooks and nylon inserts. Panels to be doubled backed enameled coated on exposed sides with a coat of 5 micron alkyd primer. Providing and fixing flush joint profile to fill 16 mm gap between the two panels shall be in 'U' shape, 16 mm wide roll formed out of 0.30 mm aluminum strip alloy ( ASTM-5050) with stove enameled/ coil coated so as to give a flat look to the ceiling when fixed in 16 mm gap between the panels. Edge cover wall L- profile to give neat look to the edges shall be roll formed out of 29.20 x 19.40 mm aluminun wall angle ( alloy ASTM-5050/3003) with stove enameled/ coil coated including necessary arrangements for making and finishing opening for supplu/ return air slits, lighting fixtures etc., cost of all materials necessary for fixing false ceiling etc. complete as per drawing, specifications and as directed by Enginner in charge.
-
-
-
Providing, fabricating and erecting S.S. tube railing of 304 Grade comprising 50mm dia. & 16 gauge thick S.S. single pipe for top and 25mm dia. double member for vertical. Providing and fixing runner pipes of 19 mm dia. S.S on middle in three rows. including providing and fixing bottom and end caps as per approved design on the top & end of the members, buffing of welded surfaces, including cost of all fittings & hardware, clamps screws etc. cutting, welding the joints, grinding/muffing if necessary etc. complete.
81
-
-
Supplying and laying 6mm thick multi wall Polycarbonate colors roofing sheet with top and bottom aluminum profile section of 50x50x2mm thick of approved make, fixed with EPDM Rubber with self tapping screws of required length anti leakage washers with all labour, materials, carting, wastage etc. complete.
225
-
-
Providing and fixing in position Aluminum partitions, doors, windows, ventilators, louvers, fixed glazing, sliding windows, north light glazing, aluminum rough ground etc. with extruded and anodized (5 microns) to natural aluminum colour, aluminum sections, anodized aluminum beadings, anodised aluminum sheets manufactured to relevant IS codes and using minimum 2mm thick (or as specified) heavy sections INDAL/JINDAL/MAN or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) including cost of pivots, approved door and window handles, EPDM gasket, PVC/Neoprene Gasket lining, stainless steel screws, mastic filling, weather strips, tower bolts, nuts, washers etc. as required and as per drawing etc. complete.
60
-
-
Note: 1. Payment will be made on the basis of weight of Aluminum members/sections fabricated and actually installed in position without extra allowance for wastage. No extra payment will be made for all non-aluminum consumable items like screws, gasket, weather strips, PVC/Neoprene lining and butt hinges, tower bolts, etc.
-
-
-
2. Glazing, particle boards, aluminum grills, mesh etc. will be measured and paid separately under relevant item.
-
-
-
3. All fittings shall be of matching colour anodised aluminum sections.
-
-
-
4. The Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angles at no extra cost.
-
-
-
Providing and fixing in position 28 guage stainless steel mosquitto proof jalli with aluminium frame work including fixing to the existing frame work, cost of all materials, washers, nuts, screws, tools & tackles etc., completed as per drawing, specifications and as directed by the Engineer-in-Charge.
42
-
-
Note: Aluminium sections will be measured and paid for separately under relevent item of schedule.
-
-
-
Providing and fixing 8mm dia.C.P. Jet spray with 1.0m long flexible tube with S.S. plate to european water closet of Plumber (U-1905) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) etc. all complete as per specifications.
83
-
-
Providing and fixing heavy quality fancy variety Two way bib tap of C.P. brass screw down 15mm n.b. Bib taps of Jaquar (CON-041KN)/ Plumber (NEC-0209) or approved equivalent make (however equivalent make shall be allowed only if the mentioned make is not available from manufacturer.) confirming to IS:8931 on G.I. pipe linecompete as per drawing, specifications and as directed by the Engineer-in-Charge.
83
-
-
Imp. Note - 8a) The bidder must possess valid EPF & ESIC registration. The bidders need to deposit EPF & ESIC with appropriate authority. The reimbursement for EPF & ESIC deposit shall not be made. 8b) The payment of wages to labourers should be made through bank. 8c) The bidder must possess sufficient manpower & other resources (as detailed in SGF ) required for the timely completion of work.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements