Public Works Department Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date10 Feb 2022
Closing Date28 Feb 2022
Tender Amount₹ 2,30,63,050
Costs
EMD
₹ 2,71,330Document Cost
₹ 15,000Tender Fee
₹ 1,534
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_PWPIU_183536_1Bid Award Id
ViewTender No
04/2022/Centralized Tender/G/APD Indore 10.02.20Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://mppwd.gov.in/en-us/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Ordinary rock
-
-
-
Extra for every additional lift of 1.5 m or part thereof in excavation. (No extra lift is payable if work is done by mechanical means)
-
-
-
All kinds of soil.
-
-
-
Extra for every additional lift of 1.5 m or part thereof in excavation. (No extra lift is payable if work is done by mechanical means)
-
-
-
Ordinary or hard rock.
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto plinth level
-
-
-
With 40mm nominal size graded stone aggregate.
-
-
-
M-15 - Grade concrete
-
-
-
4.1.1.3 M-15 M-15 – Grade concrete
-
-
-
Providing and laying in position specified grade of reinforced cement concrete (with20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to
-
-
-
M-20 Grade Concrete
-
-
-
Centering and shuttering in cluding strutting, propping etc. and removal of form for:
-
-
-
Foundations, footings, bases of columns, etc. for concrete upto plinth level
-
-
-
Centering and shuttering in cluding strutting, propping etc. and removal of form for:
-
-
-
Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc.
-
-
-
Upto plinth level
664.2
-
219
Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
-
-
-
Transportation By Mechanical Transport including loading , unloading and stacking.
-
-
-
Earth
-
-
-
Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete.
-
-
-
With hard muram having CBR 12 % at under floors including watering, ramming and compacting(minimum compaction 95%of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm)
146.03
-
300
Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete.
-
-
-
Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than
1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not
exceeding 15cm depth and dressing complete.
413.94
-
250
Supplying and filling in plinth with crusher stone dust /coarse sand under floors including, watering, ramming and compacting in layers not exceeding 20cm in depth and dressing complete Note: Maximum thickness of this layer shall be 20 cm.
68.99
-
672
Providing and laying of permanent piping technology anti-termite treatment before flooring work by installing LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm I.D.with inbuilt pressure compensation chip at every 30 cm interval in the tube, having working pressure of 2 kg/cm2 and release rate of 1.9 ltr/hour fixed by P-clips and nails. The LLDP pipe shall be installed at the entire periphery of the building and at internal network of building at a depth of 20 to 200 mm under floor at every 2 to
3 mtr. c/c distance (adjusted as per building layout) & Ends of loop pass through a PVC elbow of minimum 32mm ID at junction box of wall and floor level, entering into a steel reinforced grooved flexible pipe of minimum 22 mm ID leading into Junction box and the loops shall terminate in junction boxes & test every junction during injecting chemicals for termite control treatment. The anti- termite chemical Imidacloprid 30.5% SC mix as per IS-6313, (part
-
-
-
Permanent piping system with junction boxes
730
-
113
Anti-Termite chemical injected area
730
-
53
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto plinth level
-
-
-
With 40mm nominal size graded stone aggregate.
-
-
-
M-15 - Grade concrete
68.99
-
4403
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto plinth level :
-
-
-
With 40mm nominal size graded stone aggregate.
-
-
-
M-10 Nominal (Mix -1 Cement : 3 sand : 6 graded stone aggregate)
36
-
3808
Making plinth protection 50mm thick of cement concrete grade M10 over 75mm bed of dry metal ballast 40mm nominal size well rammed and consolidated and filled with sand including finishing the top smooth (with 20mm nominal size graded stone aggregate.)
160
-
351
Providing and laying factory made machine pressed precast cement concrete interlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness, M-30 grade with grey cement and pigment all as specified. Made by block making machine with strong vibratory compaction, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in-
192
-
586
Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string
-
-
-
courses, fillets, columns, pillars, posts and
-
-
-
struts etc. above plinth level and upto floor two
-
-
-
level excluding cost of
-
-
-
centering,shuttering, finishing and reinforcement:
-
-
-
M-20 Grade Concrete
-
-
-
Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, intels, bands, plain window sills,
-
-
-
staircases and spiral staircases above plinth
-
-
-
level and upto floor two level excluding the
-
-
-
cost of centering, shuttering, finishing and
-
-
-
reinforcement in concrete grade.
-
-
-
M-20 Grade Concrete
-
-
-
Reinforcement for R.C.C.work including straightening, cutting, bending, placing in
-
-
-
position and binding including cost of binding
-
-
-
wire all wastages and overlaps, couplers
-
-
-
(overlaps shall be provided as per requirement of
-
-
-
IS 13920 for ductile detaling IS 456 RCC Design
-
-
-
& SP 34 Reinforcement detailing ) etc. complete .
-
-
-
(Note:-
-
-
-
1. Spacer bars (chairs) shall be paid separately
-
-
-
as shown in the drawing and as per direction of
-
-
-
engineer in charge.
-
-
-
2. No extra payment shall be done for overlaps
-
-
-
and/or couplers.
-
-
-
3. Couplers shall be conforming to IS code on
-
-
-
“Reinforcement Couplers for Mechanical Splices
-
-
-
Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786
-
-
-
Centering and shuttering in cluding strutting, propping etc. and removal of form for:
-
-
-
Columns, P i l l a r s , Piers, Abutments, Posts and Struts.
-
-
-
Lintels, beams, girders, bressumers and cantilevers
-
-
-
Suspended floors, roofs, landings, balconies and access platform.
-
-
-
Stairs, (excluding landings) except spiral- Staircases.
-
-
-
Weather shade, Chajjas, corbe l s etc., inc l u di n g Edges.
-
-
-
Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in :
-
-
-
Having 50 kg/cm2 average compressive strength.
-
-
-
Cement mortar 1:6 (1 cement : 6 sand)
-
-
-
Half brick masonry with fly ash lime Gypsum bricks (FALG bricks) conforming to IS: 12894, in super structure above plinth and upto floor two level.
-
-
-
Having 50 kg/cm2 average compressive strength.
-
-
-
Cement mortar 1 : 4 (1 cement : 4sand)
-
-
-
Extra for providing and placing in position 2 Nos. 8mm dia. M.S. bars at every third course of in half brick masonry.
-
-
-
Providing and fixing ISI marked flush door
shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter.
-
-
-
30 mm thick including ISI marked
Stainless Steel butt hinges with necessary screws.
-
-
-
9.24 Extra for rebate Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured)
-
-
-
Providing and fixing glass panes/steel sheet fibre sheet with putty and glazing clips in steel doors,windows,clerestory windows all complete.
-
-
-
With 1mm thick mild steel sheet i/c
-
-
-
10.27.1 4.0 mm glass With 4.0 mm thick glass panes
-
-
-
21.9 Silicon sealant Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5 mm depth and 5 mm width
-
-
-
Add extra for providing and fixing froasted glass instead of float glass
-
-
-
With glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm)
-
-
-
Providing and fixing M.S. grills of required pattern in frames of windows etc.with M.S. flats,square or round bars etc. including priming coat with approved steel primer all complete.
-
-
-
Fixed to steel windows by welding.
-
-
-
Providing and fixing circular/Hexagonal cast iron or M.S.sheet box for ceiling fan clamp of internal dia 140mm,73mm height, top lid of 1.5mm thick
M.S.sheet with its top surface hacked for proper bonding,top lid shall be screwed into the cast iron/M.S.sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 16mm dia M.S.bar bent
to shape as per standard drawing.
-
-
-
6 mm cement plaster of mix : 1:3 (1 cement : 3 sand)
-
-
-
12 mm cement plaster of mix :
-
-
-
1:6 (1 cement : 6 sand)
-
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix
-
-
-
1:6 (1 cement : 6 sand)
-
-
-
Providing gola 75x75 mm in cement concrete 1:2:4 (1cement :2 sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 sand) as per standard design: In 75x75mm deep chase
-
-
-
12 mm cement plaster finished with a floating coat of neat cement of mix :
-
-
-
1:4 (1 cement : 4 sand)
-
-
-
Providing for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
-
-
-
Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness 9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement and matching
-
-
-
Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on
12 mm thick cement mortar 1:3 (1 Cement : 3 sand) including grouting the joints with white
cement and matching pigments etc., complete.
-
-
-
Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design,in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, quality/ premium quality in flooring laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete
-
-
-
In light shade glossy/ rustic /stain finished
-
-
-
Size 600X600 mm thickness 9-10 mm
18.24
-
1104
Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete
-
-
-
In light shade glossy/ rustic /stain finished
-
-
-
(a) Size 600X600 mm thickness 9-10 mm
-
-
-
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 sand) 25 mm thick.(Area of slab to be over 0.25 sqm)
-
-
-
risers, skirting, dado and pillars Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 11.37.1 10-12 mm thick 10-12 mm thick
-
-
-
Providing and fixing M.S. Tubular frames and shutters or frames only or shutters only for doors, windows, ventilators and cupboard with any sections, made of 1.60 mm or 1.25 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size as per drawing, including fixing of necessary butt hinges, stays and screws and applying a priming coat of approved steel primer excluding cost of all fittings such as handles, tower bolts, sliding door bolts, latches etc. and panels.
-
-
-
Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size).
-
-
-
Providing and applying white cement based putty of average thickness 1 mm,of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material labour and scaffold etc in all position complete.
Note :Putty shall be applied only on the internal walls,for application on the exterior walls prior
-
-
-
Wall painting by any mechanical or manual means with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade.
-
-
-
Finishing walls by any mechanical or manual means with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :
-
-
-
Two or more coats applied on walls @1.25 ltr/10 sqm.Over and including one coat of Special primer applied @0.75 ltr/ 10 sqm.
-
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work.
-
-
-
Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete :
-
-
-
125 mm
-
-
-
S.S. sliding door Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete:
-
-
-
300x16 mm
-
-
-
250x16 mm
-
-
-
Providing and fixing ISI marked stainless steel tower bolt black finish,(Barrel type)with necessary screws etc complete :
-
-
-
250x10 mm
-
-
-
Providing and fixing Stainless steel hanging type floor door stopper with necessary screws, etc. complete
-
-
-
9.68 S.S. door latches Providing and fixing ISI marked stainless steel door latches with screws etc. complete :
-
-
-
250x20x6 mm
-
-
-
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc.complete.
-
-
-
Twin rubber stopper
-
-
-
Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc complete
-
-
-
G.I.chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails before plastering upt 10 meter height.
-
-
-
Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice
.husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed S.S. screws having minimum density of 750 kg/m3 and screw withdrawal strength of 2200 N (Face) & 900 N (Edge), minimum compressive strength 58 N/mm2, modulus of elasticity 900 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast/lugs/S.S.dash fasteners of required dia and length complete as
per direction of Engineer-in-Charge. (M.S. hold
-
-
-
Single rebate (100 mm X50 mm)
-
-
-
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice .husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 10 gms)having minimum density of 650 Kg/cum and screw withdrawal strength of 1800 N (Face)&900N (Edge),minimum compressive strength 50 N/mm2 modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant
-
-
-
24 mm thick WPC (Wood polymer composite) solid plain flush door shutter
-
-
-
Providing and laying Antiskid floor tiles of any sizes, 12 mm thickness with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement with matching pigments etc., complete.
-
-
-
Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in- Charge.
-
-
-
Granite fine grained dark crystal of other colours and various patterns
-
-
-
Providing and laying gang saw cut 18 mm thick, mirror polished premoulded (wherever required) and pre polished machine cut granite stonework in flooring of required size shape of approved shade, color and texture in flooring laid over
20 mm thick base of cement mortar 1:4 (1 Cement: 4 sand) including grouting the joints with white cement mixed with matching pigments epoxy touch ups etc. complete as per direction of Engineer-in-Charge.
-
-
-
Area of slab upto 0.50 sqm
-
-
-
Coarsegrained granite dark Black/dark Red/ White
or equivalent with self design/ pattern/crystals of
-
-
-
Providing precast cement concrete Jali 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 6mm nominal size) reinforced with1.6 mmdia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 sand) etc. complete excluding plastering of the jambs, sills and soffits.
-
-
-
50 mm thick
-
-
-
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge. (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,
-
-
-
Distempering by any mechanical or manual means with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than
50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
-
-
-
Two coats.
-
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from
M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x
230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges
of the board with recommended jointing compound , jointing tapes, finishing
-
-
-
12.5 mm thick tapered edge gypsum board
-
-
-
Gypsum moisture resistant board.
48
-
920
Providing and fixing false ceiling at all heights with 15 mm thick integral densified tegular edged non- cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @
120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items galvanizing @ 80 grams per sqm) i.e.50 mm long, 8 mm outer diameter M- 6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry
wall S.S screws. The work shall be carried out as per
48
-
1453
Providing and fixing writing board green writing with chalk (regular modified polyster coated steel surface). of sizes.
-
-
-
Providing and laying cement concrete in Sunken
floors of WC, Toilets, Wash Areas etc with 1;5:10 (1 cement : 5 coarse sand (zone-lll) : 10
graded stone aggregate 40 mm nominal size).
,
excluding the cost of centering and shuttering
6.12
-
3141
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of (a) Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.
b) IInd course of 20mm cement plaster 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical
and horizontal surface.
-
-
-
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying :
a) After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.
b) Laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.
c) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet
wall and tucked into groove in parapet all
-
-
-
Grading roof for water proofing treatment with
-
-
-
Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)
-
-
-
Add extra for providing reinforcement above Floor two level for every additional floor or part thereof.
1224.53
-
0.4
Add extra for providing reinforcement above Floor two level for every additional floor or part thereof.
-
-
-
Extra for R.C.C. work above floor two level for each floors or part thereof. (except items 5.26 and 5.29)
-
-
-
Extra for R.C.C. work above floor two level for each floors or part thereof. (except items 5.26 and 5.29)
-
-
-
Extra for R.C.C. work above floor two level for each floors or part thereof. (except items
5.26 and 5.29)
-
-
-
Extra for brick work in superstructure above floor two levels for each additional floor or part thereof respective item.
-
-
-
Extra for brick work in superstructure above floor two levels for each additional floor or part thereof respective item.
-
-
-
Structural steel work using M.S. flats,angles, channels I-section, H-section etc.riveted, bolted or welded in built up sections,trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
-
-
-
Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
-
-
-
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer
-
-
-
M.S. tube.
-
-
-
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Rate includes recess cutting in floor and making good the same wherever required
-
-
-
Extra for Kota stone/ sand stone in treads of steps and risers using single length upto 1.05 metre.
-
-
-
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
-
-
-
Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
-
-
-
Providing edge moulding to 18mm thick marble stone counters, Vanities, window sills etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
-
-
-
Marble work
-
-
-
Making khurras 45x45 cm (sunk area) with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate of
20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete so as to receive rain water/ spillage water on roof in a sunk area and completely rain out in a near perfect strain meter
motion into rain water pipe.
-
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required
-
-
-
White Vitreous china Orissa pattern
W.C. pan of size 580x440mm with
18
-
2995
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid.
4
-
4613
Providing and fixing CP jet assembly to including connection etc complete.
4
-
375
Providing and fixing toilet paper holder:
-
-
-
C.P. brass
12
-
340
Providing and fixing wash basin with
C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :
-
-
-
White Vitreous China Wash basin size
630x450 mm with a single 15 mm
C.P. brass pillar tap.
16
-
2187
Providing and fixing P.V.C. waste pipe for sink or wash basin including
P.V.C. waste fittings complete.
-
-
-
Flexible pipe (only in residential & complaxes)
-
-
-
32 mm dia
16
-
87
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mm nominal bore.
10
-
526
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm, 15 mm nominal bore
13
-
544
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore.
15
-
778
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931, 15 mm nominal bore.
15
-
458
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore
10
-
516
Providing and fixing CP brass towel rail of approved quality and make
-
-
-
450x20mm
4
-
836
Providing and fixing CP brass soap
10
-
422
Providing and fixing PTMT grating of approved quality and colour.
-
-
-
Circular type.
-
-
-
100 mm nominal dia.
10
-
55
125 mm nominal dia with 25 mm waste hole.
10
-
60
Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
1.62
-
2440
Providing and fixing plain bend of required degree.
-
-
-
100 mm dia
-
-
-
Sand cast iron SandS as per IS -
15
-
390
75 mm dia
-
-
-
Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm
4
-
259
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls
-
-
-
100 mm inlet and 100 mm outlet
-
-
-
Spun cast iron S & S as per IS: 3989.
18
-
825
Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes and fittings of diaMETER:
-
-
-
100 mm
13
-
234
75 mm
4
-
201
Providing and fixing soil, waste and vent pipes:
-
-
-
Spun cast iron socket and spigot (S&S) pipe as per IS: 3989
-
-
-
100 mm dia with wall thickness of 4 mm
70
-
1020
Spun cast iron socket and spigot (S&S) pipe as per IS: 3989
-
-
-
75 mm dia with wall thickness of 3.5 mm
35
-
840
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :
-
-
-
100 mm diaMETER pipe
60
-
29
75 mm diaMETER pipe
28
-
22
Providing and fixing bend of required degree with access door, insertion
-
-
-
100 mm dia
-
-
-
Spun cast iron as per IS – 3989 minimum wall thickness 4 mm
9
-
408
75 mm dia
-
-
-
Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm
4
-
341
Providing and fixing heel rest sanitary bend
-
-
-
100 mm dia
-
-
-
Spun cast iron as per IS - 3989
4
-
387
75 mm dia
-
-
-
Spun cast iron as per IS - 3989
2
-
329
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings
-
-
-
Concealed work including cutting chases and making good the walls etc.
-
-
-
15 mm nominal outer dia
.Pipes.
55
-
207
20 mm nominal outer dia
.Pipes.
55
-
234
25 mm nominal outer dia
.Pipes.
55
-
288
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work
-
-
-
25 mm nominal outer dia
.Pipes.
25
-
185
32 mm nominal outer dia
.Pipes.
25
-
238
Providing and fixing CPVC gate valve with knob of approved
-
-
-
25 mm nominal bore
10
-
428
32 mm nominal bore.
10
-
500
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
10000
-
7
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.
-
-
-
15 mm nominal bore, 105 mm long. Weighing not less than 138 gms.
10
-
234
Providing and fixing Unplasticised
P.V.C. connection pipe with PTMT Nuts collar and bush of approved quality and colour
15 mm nominal bore
-
-
-
30cm length.
15
-
61
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
With C.I. wheel of approved quality (screwed end)
-
-
-
25 mm nominal bore
6
-
486
32 mm nominal bore.
6
-
558
Cutting holes upto 15x15 cm in
R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to
8
-
129
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work
-
-
-
25 mm nominal outer dia
.Pipes.
30
-
185
32 mm nominal outer dia
.Pipes.
30
-
238
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever
-
-
-
Range of three urinal basins with 10 litre white P.V.C. automatic flushing cistern.
-
-
-
Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white
P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc.
wherever required :
-
-
-
Single squatting plate with 5 litre
P.V.C. automatic flushing cistern.
-
-
-
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and
40mm C.P. brass trap with necessary
C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall
-
-
-
Size600x450x200mm
-
-
-
Providing and fixing G.I.pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.
-
-
-
External work : includingtrenching and refilling etc.
-
-
-
Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design :
-
-
-
With well burnt bricks
4
-
3941
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement :
4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate
20mm nominal size) finished with a floating coat of neat cement complete as per standard design
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
With Sewer bricks conforming to IS : 4885
-
-
-
Providing and laying non- pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete :
-
-
-
100 mm dia. R.C.C. pipe
25
-
243
150 mm dia. R.C.C. pipe
50
-
285
Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) up to haunches of PVC. pipes including bed concrete as per standard design :
-
-
-
110 mm diameter PVC. pipe
25
-
274
160 mm diameter PVC. pipe
50
-
444
Providing and fixing square- mouth S.W. gully trap class SP1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than
4.50 kg and frame to be not less than 2.70
kg as per standard design :
-
-
-
150 x 100 mm size P type.
-
-
-
With well burnt bricks
10
-
1803
Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (No extra lift is payable if work is done by mechanical means) in all kinds of soil
-
-
-
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.
75
-
156
Extra for depth for manholes
-
-
-
Size 90x80 cm
-
-
-
With Sewer bricks conforming to IS : 4885
2
-
5448
Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 900X450mm rectangular having weight of (complete unit) (weight of frame 11.7 kg + weight of cover 43.76kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement.
-
-
-
Supplying, filling, spreading and
leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads and lifts,
all complete as per direction of
1.8
-
760
Supplying, filling, spreading and
leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads and lifts, all
complete as per direction of
0.9
-
877
Supplying, filling, spreading and
leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads and lifts, all complete
as per direction of Engineer-in-
0.9
-
819
Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
-
-
-
110 mm diameter (minimum wall thickness 2.2mm)
50
-
238
Providing and fixing on wall face
Unplasticised - UPVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382
leaving 10 mm gap for thermal
-
-
-
Coupler
-
-
-
110 mm (minimum wall thickness
2.2mm)
14
-
102
Shoe (Plain)
-
-
-
110 mm Shoe (minimum wall
thickness 2.2mm)
6
-
99
Bend 87.5°
-
-
-
110 mm bend (minimum wall
thickness 2.2mm)
12
-
112
Providing and fixing
unplasticised -
PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc.
-
-
-
110 mm (minimum wall thickness
2.2mm)
33
-
114
Rain water filter made out of ABS plastics material, designed to operate on gravity of rainwater from roof through down pipe, having inlet (id) of 110 mm, outlet (id) of 110 mm; provided with SS 304 wire mesh filter element having diameter of not less than 90 mm and height not less than 500 mm with cap of not less than 70 mm height with two holes of not less than
10 mm on cap as a safety feature. Element must have back wash cap at bottom for cleaning dried particles. Filter must have flush outlet of not
less than 60 mm moulded
-
-
-
System size 110mm diameter (filterain, tee, door bend, and valve 110mm) For the catchment up to 200 square
1
-
7750
Boring/drilling bore well of required dia perfectly vertical to receive casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipments, tools, plants and machineries required for the job, all complete as per direction of Engineer–in-Charge, upto 90
-
-
-
All types of soil upto 90 metre depth.
-
-
-
200 mm dia.
50
-
451
Rocky strata including Boulders.Upto 90 metre depth.
-
-
-
200 mm dia.
40
-
621
Supplying, assembling, lowering
and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings and
accessories etc. all complete,
-
-
-
200 mm nominal dia(minimum
10
-
559
Supplying, assembling, lowering
and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire and labour charges, fittings and accessories etc. All
complete, for all depths, as per
-
-
-
200 mm nominal size dia.
60
-
878
Supplying, assembling, lowering
and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of required dia, conforming to IS: 4270, of reputed and approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire and labour charges, fittings
and accessories, all complete,
-
-
-
200 mm nominal size dia having
minimum wall thickness 5.40
1.5
-
1611
Gravel packing in tubewell
construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading and sizes as per actual requirement, all complete as per direction of
7.54
-
947
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS: 2800 (part I).
-
-
-
200 mm dia
1
-
265
Up to Plinth Level
-
-
-
Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete.
-
-
-
Cement Mortar 1:6 (1 cement:6 sand).
3.08
-
5061
12 mm cement plaster finished with a floating coat of neat cement of mix :
-
-
-
1:4 (1 cement : 4 sand)
19.34
-
135.9
Boring/drilling bore well of required dia perfectly vertical to receive casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipments, tools, plants and machineries required for the job, all complete as per direction of Engineer–in-Charge, upto 90 metre depth below ground level.
-
-
-
All types of soil upto 90 metre depth.
-
-
-
200 mm dia.
80
-
451
Rocky strata including Boulders.Upto 90 metre depth.
-
-
-
200 mm dia.
80
-
621
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings and accessories etc. all complete, for all depths, as per direction of Engineer-in-Charge.
-
-
-
200 mm nominal dia(minimum wall thickness 10mm).
10
-
559
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire and labour charges, fittings and accessories etc. All complete, for all depths, as per direction of Engineer-in-Charge.
-
-
-
200 mm nominal size dia.
90
-
878
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:
-
-
-
200 mm dia
1
-
488
Providing and fixing M.S. clamp of required dia made of 100 x10 mm flat to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts and nuts of required size complete.
-
-
-
200 mm clamp.
1
-
1281
Providing and placing in position hand pump of India mark II of approved quality for
40 mm diameter G.I. pipe
complete with all accessories.
1
-
841
Constructing soak pit 1.20x1.20x1.20m filled with brickba ts including S.W . drain pipe 100
mm diameter and
1.20m long complete as per stand ard design.
1
-
3172
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.
-
-
-
External work : including trenching and refilling etc.
-
-
-
32 mm dia. nominal bore
10
-
310
40 mm dia. nominal bore
10
-
402
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
With C.I. wheel of approved quality (screwed end)
-
-
-
32 mm nominal bore.
1
-
558
40 mm nominal bore
1
-
677
Providing & Fixing of Precast RCC drain cover of size 750x600 x70mm (thickness) with 6 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve
50
-
550
Providing and fixing of ABC Power type fire extinguishers consisting of welded M.S. cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge internal discharge tube 30 cm long high pressure discharge hose, discharge nozzle, suspension bracket. Conforming to IS: 15683 finished externally with red enamel paint fixed to wall with brackets complete with internal charge.
-
-
-
Capacity 9.0 kg
3
-
4080
Providing and fixing of carbon-di-
oxide type fire extinguishers consisting of welded M.S. cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge internal discharge tube 30 cm long high pressure discharge hose, discharge nozzle, suspension bracket conforming to IS : 15683 finished externally with red enamel paint and fixed to wall with brackets complete with
internal charge.
-
-
-
Capacity 4.5 kg
3
-
11351
PROJECT ENGINEER
-
-
-
PIU PWD JHABUA
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements