Public Works Department Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Public Works Department - PWD Tender
Civil And Construction
Excavation
Eprocure
Opening Date6 Jan 2025
Closing DateCancelled
Tender Amount₹ 3,04,20,000
Costs
EMD
₹ 3,04,200Document Cost
₹ 15,000Tender Fee
₹ 1,534
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWDRB_392098_1Tender No
NIT 08 /SIDHI / 2024-25 /DT 01-01-2025Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://mptenders.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Balance Work Upgradation of Majhauli By Pass Road L -1.60Km , Under Sub. Dn. Majhauli, Distt. Sidhi, PWD Raod SOR w.e.f 25-03-22
Balance Work Upgradation of Majhauli By Pass Road L -1.60Km , Under Sub. Dn. Majhauli, Distt. Sidhi, PWD Raod SOR w.e.f 25-03-22
Balance Work Upgradation of Majhauli By Pass Road L -1.60Km , Under Sub. Dn. Majhauli, Distt. Sidhi, PWD Raod SOR w.e.f 25-03-22
BOQ Items
... More
Crusher Run Macadam Sub Base/Base Course Providing crushed stone aggregate, depositing on a prepared surface by hauling vehicles, spreading and mixing with a motor grader, watering and compacting with a vibratory roller to clause 410 to form a layer of sub-base/Base in accordance to Table No. 400-14, 400-15 and as per clause of section 407 of specifications.
(ii) For 37.5 mm maximum size
4416
1157
5109312
... More
Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with roller to achieve the desired density in accordance to Table No. 400-12, 400-13and as per clause of section 406 of specifications.
2800
1493
4180400
... More
Hard Shoulders Construction of Shoulders with approved material/selected soil i/c excavation all lifts & leads i/c grading to required slope & camber of 4% and compacting using vibratory roller of 80 to 100 kN static weight to meet requirement as per relevant clause of 400
(B) Hard Shoulders (CBR value 12)
3192
223
711816
... More
Prime coat Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.75 kg/sqm using mechanical means as per clause 502 of specifications.
11200
37
414400
... More
Tack coat Providing and applying tack coat with catonic bitumen emulsion (RS-1) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of specifications.
(ii) 0.30 kg per sqm (dry & hungry bituminous surfaces /granular surfaces treated with primer)
11200
16
179200
... More
Dense Graded Bituminous Macadam Providing and laying dense bituminous macadam using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5% by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a Electronic Sensor paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per clause 505 of specification complete in all respects.
a) Using Batch Mix Plant of appropriate capacity (iv) (iv) for Grading II (19 mm nominal size)Bitumen Content minimum 4.5% with bitumen 60/70 (VG 30)
784
8167
6402928
... More
Bituminous Concrete Providing and laying bituminous concrete using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a Electronic Sensor paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per clause 507 of specification.
a) Using Batch Mix Plant of appropriate capacity
(v) for Grading-II (30-40 mm thickness ) Bitumen Content minimum 5.4%with 60/70 bitumen(VG-30)
336
9581
3219216
... More
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous surface-Providing and applying (Cleaning of Bituminous surface) thermoplastic compound having composition of binder (Regin) minimum 18%, b titanium dioxide minimum 10% and intermixed glass beaded, minimum 30% of brand like Asian, Burger or equivalent make of 2.5 mm thick including drop down reflectorizing, glass beads @ 250 grams per sq m area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 The finished surface to be level, uniform and free from streaks and holes, all complete as per clause 803 of specifications. Note:- The guarantee of Thermoplastic should be minimum 3 Years.
480
636
305280
... More
Road Markers/Road Stud with Lenses Reflector-Providing and fixing single mound twin spanked molded Road Markers/Road Stud made of poly carbonate or ABS body and shall support a load of 13635 Kg tested in accordance to ASTM D 4280 and complying lo specifications of Section-5 of IRC:35-2015 and clause 804.2.2 of MORT&H and Section-5 of IRC:35-2015. he reflecting panels shall consist of number of lenses containing single or dual prismatic cubes capable of providing total internal reflection of the light entering the lens face. The slope or retro-reflecting surface should be 35 + 5 degree to base. The reflective marker shall be fixed to the road surface using the epoxy/adhesives and the procedure recommended by the manufacturer. No nails shall be used to affix the markers so Cubes capable of that they do not pose safety hazard on the road.. The contractor shall submit a two year replacement warranty. for satisfactory
180
673
121140
... More
Traffic Cone -Providing of red fluorescent with white reflective sleeve traffic cone made of low density polyethylene (LDPE) material with a square base of 390 x 390 x 35 mm and a height of 770 mm, 4 kg in weight, placed at 1.5 m interval, all as per BS 873. as per requirement Note:- Provided till the end of agreement period
12
197
2364
... More
Kilo Metre Stone Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc
(ii) Ordinary Kilometer stone (Precast)
3
1984
5952
... More
Kilo Metre Stone Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc
(iii) Hectometer stone (Precast)
7
578
4046
... More
Retro- reflectorised Traffic signs Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign board as per IRC 67-2012 made of high intensity Micro-Prismatic Grade Sheeting (Type IV) vide IRC: 67:2012 clause 6.7.3.2 and clause 801.3.3 of MoRT &H fixed over Aluminum composite material sheet with thermoplastic core of Low density polyethylene (LDPE) between two thick skins/sheets of aluminum with overall thickness of 4mm and aluminum skin of thickness 0.3 on both side, the ACM shall conform to Table 6.1 of IRC:67:2012 and Table 800-1 of MoRT &H specification and High Intensity Micro Prismatic Grade Sheeting shall conform to Table 6.6 of IRC:67:2012 and Table 800-3 of MoRT &H specification of in the clause IRC 6.8 of the IRC 67-2012 and clause 801.3.7 of MORTH message legend numerical letter etc. and borders shall be screen printed on high intensity micro prismatic sheeting shall conform to clause 801.3.7 with digital printing ink or of cutout from transparent durable overlay or cutout from the same type of reflecting sheeting for cautionary/ mandatory/ signs, supported on MS sign post of size 75mm x75mm x 6mm of 3.60 meter over all length and fix to ground by means of properly designed foundation of dimension 450x450x600mm with M20 grade concrete. The ACM sheet shall be fixed to the post with four minimum four number breakaway bolts. & supported with a back support frame of 25mmx25mmx3mm angle. 7 years warranty for Retro Reflection Sheeting to be provided from the original sheeting manufacture as per clause 6.9 of IRC: 67:2012 & a certified copy for three years for outdoor exposure report from an independent test lab as per clause 6.7 of IRC: 67:2012 for the product offered shall be submitted by the contractor.
i) 90 cm equilateral triangle
2
4184
8368
... More
Retro- reflectorised Traffic signs Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign board as per IRC 67-2012 made of high intensity Micro-Prismatic Grade Sheeting (Type IV) vide IRC: 67:2012 clause 6.7.3.2 and clause 801.3.3 of MoRT &H fixed over Aluminum composite material sheet with thermoplastic core of Low density polyethylene (LDPE) between two thick skins/sheets of aluminum with overall thickness of 4mm and aluminum skin of thickness 0.3 on both side, the ACM shall conform to Table 6.1 of IRC:67:2012 and Table 800-1 of MoRT &H specification and High Intensity Micro Prismatic Grade Sheeting shall conform to Table 6.6 of IRC:67:2012 and Table 800-3 of MoRT &H specification of in the clause IRC 6.8 of the IRC 67-2012 and clause 801.3.7 of MORTH message legend numerical letter etc. and borders shall be screen printed on high intensity micro prismatic sheeting shall conform to clause 801.3.7 with digital printing ink or of cutout from transparent durable overlay or cutout from the same type of reflecting sheeting for cautionary/ mandatory/ signs, supported on MS sign post of size 75mm x75mm x 6mm of 3.60 meter over all length and fix to ground by means of properly designed foundation of dimension 450x450x600mm with M20 grade concrete. The ACM sheet shall be fixed to the post with four minimum four number breakaway bolts. & supported with a back support frame of 25mmx25mmx3mm angle. 7 years warranty for Retro Reflection Sheeting to be provided from the original sheeting manufacture as per clause 6.9 of IRC: 67:2012 & a certified copy for three years for outdoor exposure report from an independent test lab as per clause 6.7 of IRC: 67:2012 for the product offered shall be submitted by the contractor.
ii) 60 cm equilateral triangle
1
3011
3011
... More
Retro- reflectorised Traffic signs Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign board as per IRC 67-2012 made of high intensity Micro-Prismatic Grade Sheeting (Type IV) vide IRC: 67:2012 clause 6.7.3.2 and clause 801.3.3 of MoRT &H fixed over Aluminum composite material sheet with thermoplastic core of Low density polyethylene (LDPE) between two thick skins/sheets of aluminum with overall thickness of 4mm and aluminum skin of thickness 0.3 on both side, the ACM shall conform to Table 6.1 of IRC:67:2012 and Table 800-1 of MoRT &H specification and High Intensity Micro Prismatic Grade Sheeting shall conform to Table 6.6 of IRC:67:2012 and Table 800-3 of MoRT &H specification of in the clause IRC 6.8 of the IRC 67-2012 and clause 801.3.7 of MORTH message legend numerical letter etc. and borders shall be screen printed on high intensity micro prismatic sheeting shall conform to clause 801.3.7 with digital printing ink or of cutout from transparent durable overlay or cutout from the same type of reflecting sheeting for cautionary/ mandatory/ signs, supported on MS sign post of size 75mm x75mm x 6mm of 3.60 meter over all length and fix to ground by means of properly designed foundation of dimension 450x450x600mm with M20 grade concrete. The ACM sheet shall be fixed to the post with four minimum four number breakaway bolts. & supported with a back support frame of 25mmx25mmx3mm angle. 7 years warranty for Retro Reflection Sheeting to be provided from the original sheeting manufacture as per clause 6.9 of IRC: 67:2012 & a certified copy for three years for outdoor exposure report from an independent test lab as per clause 6.7 of IRC: 67:2012 for the product offered shall be submitted by the contractor.
iii) 60 cm circular
1
3779
3779
... More
Retro- reflectorised Traffic signs Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign board as per IRC 67-2012 made of high intensity Micro-Prismatic Grade Sheeting (Type IV) vide IRC: 67:2012 clause 6.7.3.2 and clause 801.3.3 of MoRT &H fixed over Aluminum composite material sheet with thermoplastic core of Low density polyethylene (LDPE) between two thick skins/sheets of aluminum with overall thickness of 4mm and aluminum skin of thickness 0.3 on both side, the ACM shall conform to Table 6.1 of IRC:67:2012 and Table 800-1 of MoRT &H specification and High Intensity Micro Prismatic Grade Sheeting shall conform to Table 6.6 of IRC:67:2012 and Table 800-3 of MoRT &H specification of in the clause IRC 6.8 of the IRC 67-2012 and clause 801.3.7 of MORTH message legend numerical letter etc. and borders shall be screen printed on high intensity micro prismatic sheeting shall conform to clause 801.3.7 with digital printing ink or of cutout from transparent durable overlay or cutout from the same type of reflecting sheeting for cautionary/ mandatory/ signs, supported on MS sign post of size 75mm x75mm x 6mm of 3.60 meter over all length and fix to ground by means of properly designed foundation of dimension 450x450x600mm with M20 grade concrete. The ACM sheet shall be fixed to the post with four minimum four number breakaway bolts. & supported with a back support frame of 25mmx25mmx3mm angle. 7 years warranty for Retro Reflection Sheeting to be provided from the original sheeting manufacture as per clause 6.9 of IRC: 67:2012 & a certified copy for three years for outdoor exposure report from an independent test lab as per clause 6.7 of IRC: 67:2012 for the product offered shall be submitted by the contractor.
iv) 80 mm x 60 mm rectangular
1
4971
4971
... More
Retro- reflectorised Traffic signs Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign board as per IRC 67-2012 made of high intensity Micro-Prismatic Grade Sheeting (Type IV) vide IRC: 67:2012 clause 6.7.3.2 and clause 801.3.3 of MoRT &H fixed over Aluminum composite material sheet with thermoplastic core of Low density polyethylene (LDPE) between two thick skins/sheets of aluminum with overall thickness of 4mm and aluminum skin of thickness 0.3 on both side, the ACM shall conform to Table 6.1 of IRC:67:2012 and Table 800-1 of MoRT &H specification and High Intensity Micro Prismatic Grade Sheeting shall conform to Table 6.6 of IRC:67:2012 and Table 800-3 of MoRT &H specification of in the clause IRC 6.8 of the IRC 67-2012 and clause 801.3.7 of MORTH message legend numerical letter etc. and borders shall be screen printed on high intensity micro prismatic sheeting shall conform to clause 801.3.7 with digital printing ink or of cutout from transparent durable overlay or cutout from the same type of reflecting sheeting for cautionary/ mandatory/ signs, supported on MS sign post of size 75mm x75mm x 6mm of 3.60 meter over all length and fix to ground by means of properly designed foundation of dimension 450x450x600mm with M20 grade concrete. The ACM sheet shall be fixed to the post with four minimum four number breakaway bolts. & supported with a back support frame of 25mmx25mmx3mm angle. 7 years warranty for Retro Reflection Sheeting to be provided from the original sheeting manufacture as per clause 6.9 of IRC: 67:2012 & a certified copy for three years for outdoor exposure report from an independent test lab as per clause 6.7 of IRC: 67:2012 for the product offered shall be submitted by the contractor.
v) 60 cm x 45 cm rectangular
1
3700
3700
... More
Retro- reflectorised Traffic signs Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign board as per IRC 67-2012 made of high intensity Micro-Prismatic Grade Sheeting (Type IV) vide IRC: 67:2012 clause 6.7.3.2 and clause 801.3.3 of MoRT &H fixed over Aluminum composite material sheet with thermoplastic core of Low density polyethylene (LDPE) between two thick skins/sheets of aluminum with overall thickness of 4mm and aluminum skin of thickness 0.3 on both side, the ACM shall conform to Table 6.1 of IRC:67:2012 and Table 800-1 of MoRT &H specification and High Intensity Micro Prismatic Grade Sheeting shall conform to Table 6.6 of IRC:67:2012 and Table 800-3 of MoRT &H specification of in the clause IRC 6.8 of the IRC 67-2012 and clause 801.3.7 of MORTH message legend numerical letter etc. and borders shall be screen printed on high intensity micro prismatic sheeting shall conform to clause 801.3.7 with digital printing ink or of cutout from transparent durable overlay or cutout from the same type of reflecting sheeting for cautionary/ mandatory/ signs, supported on MS sign post of size 75mm x75mm x 6mm of 3.60 meter over all length and fix to ground by means of properly designed foundation of dimension 450x450x600mm with M20 grade concrete. The ACM sheet shall be fixed to the post with four minimum four number breakaway bolts. & supported with a back support frame of 25mmx25mmx3mm angle. 7 years warranty for Retro Reflection Sheeting to be provided from the original sheeting manufacture as per clause 6.9 of IRC: 67:2012 & a certified copy for three years for outdoor exposure report from an independent test lab as per clause 6.7 of IRC: 67:2012 for the product offered shall be submitted by the contractor.
vi) 60 cm x 60 cm square
1
4245
4245
... More
Retro- reflectorised Traffic signs Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign board as per IRC 67-2012 made of high intensity Micro-Prismatic Grade Sheeting (Type IV) vide IRC: 67:2012 clause 6.7.3.2 and clause 801.3.3 of MoRT &H fixed over Aluminum composite material sheet with thermoplastic core of Low density polyethylene (LDPE) between two thick skins/sheets of aluminum with overall thickness of 4mm and aluminum skin of thickness 0.3 on both side, the ACM shall conform to Table 6.1 of IRC:67:2012 and Table 800-1 of MoRT &H specification and High Intensity Micro Prismatic Grade Sheeting shall conform to Table 6.6 of IRC:67:2012 and Table 800-3 of MoRT &H specification of in the clause IRC 6.8 of the IRC 67-2012 and clause 801.3.7 of MORTH message legend numerical letter etc. and borders shall be screen printed on high intensity micro prismatic sheeting shall conform to clause 801.3.7 with digital printing ink or of cutout from transparent durable overlay or cutout from the same type of reflecting sheeting for cautionary/ mandatory/ signs, supported on MS sign post of size 75mm x75mm x 6mm of 3.60 meter over all length and fix to ground by means of properly designed foundation of dimension 450x450x600mm with M20 grade concrete. The ACM sheet shall be fixed to the post with four minimum four number breakaway bolts. & supported with a back support frame of 25mmx25mmx3mm angle. 7 years warranty for Retro Reflection Sheeting to be provided from the original sheeting manufacture as per clause 6.9 of IRC: 67:2012 & a certified copy for three years for outdoor exposure report from an independent test lab as per clause 6.7 of IRC: 67:2012 for the product offered shall be submitted by the contractor.
vii) 90 cm high octagon
1
6132
6132
... More
Direction and Place Identification signs more than 0.9 sqm size board. Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign board as per IRC 67-2012 made of high intensity Micro-Prismatic Grade Sheeting (Type XI) vide IRC: 67:2012 clause 6.7.3.2 and clause 801.3.3 of MoRT&H fixed over Aluminum composite material sheet with thermoplastic core of Low density polyethylene (LDPE) between two thick skins/sheets of aluminum with overall thickness of 4mm and aluminum skin of thickness 0.3 on both side, the ACM shall conform to Table 6.1 of IRC:67:2012 and Table 800-1 of MoRT&H specification and High Intensity Micro Prismatic Grade Sheeting shall conform to Table 6.6 of IRC:67:2012 and Table 800-3 of MoRT&H specification of in the clause IRC 6.8 of the IRC 67-2012 and clause 801.3.7 of MORTH message legend numerical letter etc. and borders shall be screen printed on high intensity micro rismatic sheeting shall conform to clause 801.3.7 with digital printing ink or of cutout from transparent durable overlay or cutout from the same type of reflecting sheeting for cautionary/ mandatory/ signs, supported on MS sign post of size 75mm x75mm x 6mm of 3.60 meter over all length and fix to ground by means of properly designed foundation of dimension 450x450x600mm with M20 grade concrete. The ACM sheet shall be fixed to the post with four minimum four number breakaway bolts. & supported with a back support frame of 5mmx25mmx3mm angle. 10 years warranty for Retro Reflection Sheeting to be provided from the original sheeting manufacture as per clause 6.9 of IRC: 67:2012 & a certified copy for three years for outdoor exposure report from an independent test lab as per clause 6.7 of IRC: 67:2012 for the product offered shall be submitted by the contractor. Note:- Manufacture name and date of manufacture is to be printed (Embossed) at the backside of the board.
1.8
15506
27910.8
... More
Excavation for Structures Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. as per relevant clauses of section 300 & 2100 in I Ordinary soil ( including back filling with approved material)
(i) upto 3 m depth
471.95
61
28788.95
... More
Excavation for Structures Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. as per relevant clauses of section 300 & 2100 in II Ordinary rock (not requiring blasting)
(i) upto 3 m depth
18.75
77
1443.75
... More
Add extra as follows in the rates of the above items if dewatering is resorted to
a) upto 3 m depth
I Ordinary soil
18.75
39
731.25
... More
PCC M-15 in Foundation Plain cement concrete M-15 mix with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. as per MORT&H Specification 409.
48.75
4195
204506.25
... More
Providing P.C.C. M-15 Nominal mix for hume pipe culverts in foundation and sub structure etc. as per drawing and as per relevant clauses of section 1500, 1700, 2100 and 2900.
247.95
4617
1144785.15
... More
Laying Reinforced Cement Concrete Pipe NP4/prestrssed concrete pipe on first class bedding in single row. Providing and Laying Reinforced cement concrete pipe NP4/prestrssed concrete pipe for culverts on first class bedding of granular material (cost of bedding included) in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets. A 1000 MM Dia
37.5
7012
262950
... More
Plain/Reinforced cement concrete in sub-structure complete as per drawing and technical specifications
A PCC Grade M-15
72.48
5130
371822.4
... More
Plain/Reinforced cement concrete in sub-structure complete as per drawing and technical specifications
B PCC Grade M-20
82.65
5727
473348
... More
Plain/Reinforced cement concrete in sub-structure complete as per drawing and technical specifications
C PCC Grade M25
1 Height up to 5 m
11.71
5937
69522.27
... More
Supplying, fitting and placing HYSD bar reinforcement in substructure complete as per drawing and technical specifications and as per relevant clause of section 1600.( FE - 500 )
4.09
80503
329587.33
... More
Providing Plain cement concrete M-15 nominal mix in foundation as per relevant clauses of sections 1500, 1700 and 2100.
2.83
4349
12290.27
... More
Providing and laying Plain/Reinforced cement concrete in open foundation including form work shuttering etc. complete as per drawing and technical specifications and as per relevant clauses of sections 1500, 1700 & 2100 with .
B PCC Grade M20
13.61
5162
70254.82
... More
Furnishing and Placing inforced/ Prestressed cement concrete in super-structure as per drawing and Technical Specification and as per relevant clauses of sections 1500, 1700 and 2300 in
C RCC Grade M 30
(i) For Solid slab & voided slab
1 Height up to 5 m
7.82
6113
47779.21
... More
Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications and as per relevant clauses of sections 1500, 1700 and Clause 2702 of specifications..
2.22
11685
25893.96
... More
Supplying, fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and technical specifications as per relevant clauses of section 1600
2.12
81810
173216.31
... More
Back filling behind abutment, wing wall and return wall complete as per drawing and Technical specification and as per relevant clauses 305 of specifications and as per appendix 6 of IRC-78.
A Granular material
162.5
665
108062.5
... More
Providing and fixing in position bituminous paper bearing for slabs as per approved drawing and confirming to IS:1398.
6.46
48
310.08
... More
Providing weep holes in Brick asonry/ Plain/ Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC/PVC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. omplete as per drawing and Technical specifications
32
185
5920
... More
ELECTRIC POLE SHIFTING
Supply of support for overhead line RS joist of I.S. standard including drilling of required hole etc. complete as required.
R.S. Joist 175x90 - 19.3 kg/meter
186
979
182094
... More
Supply of support for overhead line RS joist of I.S. standard including drilling of required hole etc. complete as required.
H - Beam 152x152mm, Std weight 37.1 Kg/Mtr
83
1882
156206
... More
Supplying and drawing All Aluminum Alloy conductor (AAAC) of approved make confirming to IS 398-1979 Pt. IV, including binding at existing insulator, jointing, jumpering, tearing off, connecting etc. as required including clearing of obstacles (if any)
AAAC 0.05 sq inch (55 sq.mm Al. EQ.)- (Rabbit)
0.06
46447
2786.82
... More
Supplying and drawing All Aluminum Alloy conductor (AAAC) of approved make confirming to IS 398-1979 Pt. IV, including binding at existing insulator, jointing, jumpering, tearing off, connecting etc. as required including clearing of obstacles (if any)
AAAC 0.075 sq inch (80 Sq.mm Al. EQ. ) -(Raccoon)
6.9
57844
399123.6
... More
Supplying and drawing All Aluminum Alloy conductor (AAAC) of approved make confirming to IS 398-1979 Pt. IV, including binding at existing insulator, jointing, jumpering, tearing off, connecting etc. as required including clearing of obstacles (if any)
AAAC 0.1 sq inch (100 sq.mm Al. EQ.)- (Dog)
4.61
72079
332284.19
... More
Guard wire/earth wire/bearer wire 13 sq mm- Supplying and drawing guard wire/earth wire/bearer wire 13 sq mm (4mm. dia) G.I. including stringing, binding at existing insulators or brackets, jointing, jumpering , connecting & cradle etc. as required and clearing of obstacles (if any)
3
10519
31557
... More
Erection of poles, length 7 meters but not exceeding 10 meters - Erection of RS Joist pole/'H' beam/ steel tubular /steel rail pole of length 7 meters but not exceeding 10 meters in cement concrete 1:3:6 (1 cement : 3 core sand: 6 graded stone aggregate 40mm nominal size) base, foundation, muffing including excavation
20
3404
68080
... More
Erection of poles, length exceeding 10 meters but not exceeding 13 meters- Erection of RS Joist pole/ 'H' beam/ steel tubular/steel rail pole of length exceeding 10 meters but not exceeding 13 meters in cement concrete M-10 (1 cement:3 core sand: 6 graded stone aggregate 40mm nominal size) base, foundation, muffing including excavation and back refilling etc. as required.
22
4162
91564
... More
Supplying and erection of stay set complete (galvanized) with16mm dia x1.8 metre long stay anchor plate of size200mmx200mmx6.0mm thimble stay clamp turn buck le19mmx600mm,7/3.15mm dia G.I.stay wire etc. in cement concreteM-10(1cement:3 coarse and: 6grinded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc.as required.
17
2608
44336
... More
Supplying and erection of stay set complete with 19/20 mm. dia1.8 metre long stay rod, turn buckle, anchorplate of size 300mm x 300mmx 7.5 mm thimble stay clamp, bow tightener, 7/4.00 dia G.I. stay wire etc.in cement concreteM-10 (1cement:3coarseand:6granded stone aggregate 40 mm nominal size) foundation including excavation and back refilling etc.as required.
49
3236
158564
... More
Angle/channel/flat iron fitting for overhead line & substation etc.- Supply, fabrication and erection of angle/ channel/flat iron fitting for overhead line & sub-station etc such as 'D' bracket, cross arms, top clamp, 'V' cross arms, back/support clamp or other similar work etc. including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of aluminum paint as required as per specification.
7960
78
620880
... More
Labor charges for erection of Angle /channel/flat iron fitting for overhead line & substation etc Labour charges for erection of angle/channel/flat iron fitting for overhead line & sub-station etc such as 'D' bracket, cross arms, top clamp, 'V' cross arms, back/support clamp or other similar work etc. including nut bolts of required size, as required as per specification.
7960
11
87560
... More
11KV (5 KN) polymer pin insulator- Supplying and erection of 11KV (5 KN) polymer pin insulator complete with long steel head G.I. pin, nut, washer etc. as required.
62
325
20150
... More
11KV (45 KN) Polymer disc insulator for 11KV overhead lines- Supplying and erection of 11KV (45 KN) Supplying and erection of 11KV (45 KN) Polymer disc insulator for 11KV overhead lines with galvanized insulator fittings, ball and socket type, and complete with galvanized strain clamp, bolts, nuts washer etc. as required.
66
389
25674
... More
Outdoor H.T., AB switch assembly set Supplying installing, testing & commissioning of outdoor H.T., AB switch assembly set gang operated with brass contact parts, including required GI pipe operating rod, handle & locking arrangement on On-Off position conforming to IS complete with required material and installing on existing DP structure to complete the job as required as per specification.(Set of 3 nos.) 11 KV, 400Amp
2
6922
13844
... More
Anti-climbing device-Supply & fixing anti climbing device with 2 ply G.I. barbed wire 1 Kg. per pole complete as per MPMKVVCO. Specification.
37
116
4292
... More
G.I. earth coil of 4mm dia- Supply, laying and fixing of G.I. earth coil of 4mm dia G.I. wire having 120 turns of nearly 50mm dia. and 3 mt. long tail in existing pit duly earthed with pole etc complete as required as per specification.
42
229
9618
... More
Danger board- Supplying and fixing 33/11/0.4 KV enamel coated danger board size 200x250mm with clamp on existing HT/LT structure/poles.
22
158
3476
... More
PVC insulated XLPE aerial bunch power cable- Supplying & drawing/ laying of PVC insulated XLPE aerial bunch power cable conductor H2/H4 grade aluminum solid/stranded conforming to IS-14255-1995, alu. alloy insulated messenger 1100 volts grade cable of approved make in air with necessary material as per specification of required size as mentioned below–Single core cable (insulated neutral messenger)
3x95 sq.mm, 1x16(st. light), 1x50(insulated neutral messenger)
1819
510
927690
... More
Aerial bunch cable accessories Suspension clamp- Supplying & fixing of aerial bunch cable accessories suspension clamp i/c required attachment for single core cable of approved make on pole with clamp, necessary material as per specification for required size.
12
348
4176
... More
Supplying &fixing of aerial bunch cable accessories tension clamp (dead end) i/c required attachment for single core cable of approved make in air with clamp, necessary material as per Specification for required size.
8
374
2992
... More
Supplying & fixing of water proof insulation piercing connector for aerial bunch cable i/c required attachment for single core cable of approved make in air with necessary material as per specification of required size as mentioned below –
42.93.1 Main:16-95sq.mm, tap:1.5-50sq.mm
59
144
8496
... More
Supplying & fixing of water proof insulation piercing connector for aerial bunch cable i/c required attachment for single core cable of approved make in air with necessary material as per specification of required size as mentioned below –
42.93.2 Main:50-150sq.mm, tap:6-50sq.mm
39
173
6747
... More
Fixing of spring loaded bus bar screw less connector with enclosure of approved make including required clamp, nut, bolt, connection, testing as per specification to complete the job.
42.94.1.2 Single phase- 1Ph, 1In+8ut
16
3481
55696
... More
Fixing of spring loaded bus bar screw less connector with enclosure of approved make including required clamp, nut, bolt, connection, testing as per specification to complete the job.
42.94.2.3, Three Phase- 3Ph, 1In+6Out
14
5965
83510
... More
Supplying and erection of single piece non linear resistor type lighting arrestor (set of 3 nos) for 3wire,11KV overhead lines/sub-station with rated voltage of 9KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanized clamping arrangement, G.I. bolts, nuts, washer etc. as required
2
3269
6538
... More
Supply, fixing, testing & commissioning wall /floor mounted LT panel primer coated with powder coated paint & provided with required gasket for dust / vermin proof with degree of protection IP42 suitable for 415 Volt 3phase,50Hz,4wire system fabricated out of CRCA sheet up to2mm thick (1.6mm for doors) duly compartmentalized for incomer, bus section, outgoings, cable all eys & CT, PTA mpere Metre, Volt Metre, selector switches, frequency Metre, phase indicating lamp, Energy Metre complete including cost of bus bar supports, detachable cable gland plates, 2 earthing terminals, internal wiring & fixing of separately supplied MCBs, MCCBs, ACB, panel mounted change over switch / SFUs, etc. as required but excluding cost of bus bar strips, Ampere Metre, Volt Metre, selector switch as per approved design & specification
270
320
86400
... More
Supply and fixing of LT panel accessories of approved make in existing LT panel including connections etc. as required as per specification.
Digital Ampere Metre with CTs with selector switch
6
1773
10638
... More
Supply and fixing of LT panel accessories of approved make in existing LT panel including connections etc. as required as per specification.
Digital Volt Metre with selector switch & HRC fuse
6
1909
11454
... More
Supply and fixing of LT panel accessories of approved make in existing LT panel including connections etc. as required as per specification.
Frequency Metre
6
1091
6546
... More
Supply and fixing of LT panel accessories of approved make in existing LT panel including connections etc. as required as per specification.
Copper bus bar strips with PVC sleeves
50
591
29550
... More
Supply and fixing of LT panel accessories of approved make in existing LT panel including connections etc. as required as per specification.
Aluminium bus bar strips with PVC sleeves
70
227
15890
... More
Supply and fixing of LT panel accessories of approved make in existing LT panel including connections etc. as required as per specification.
LED lamp indicator
6
182
1092
... More
Supply of XLPE insulated power cable (conformingIS-7098Part-I) 1100 Volt grade, 1core/2core/3½core/4 core ISI marked with alu. stranded /solid conductor
41.1.1 Unarmoured1 core
41.1.1.5 70 sq. mm.
160
80
12800
... More
Supply of XLPE insulated power cable (conformingIS-7098Part-I) 1100 Volt grade, 1core/2core/3½core/4 core ISI marked with alu. stranded /solid conductor
41.1.1 Unarmoured1 core
41.1.1.8 150 sq. mm.
80
165
13200
... More
Supplying installing, testing & commissioning D.O. fuse assembly with brass part contact for33or 11/0.4 KVDP Structure set of 3Nos. With fuse barrel i/c required fuse element & other materials as per specification on existing D.P. structure as required 42.62.1 11KV
2
3249
6498
... More
Supplying, installing, testing and commissioning of 11/0.4 KV 3 Phase 50 cycle oil immersed, naturally cooled, out door type transformer connected delta on H.T. side and star on L.T. side, dehydrating silica gel breather on eye level, rating and diagram plate, two earthing terminal, lifting lugs, oil level gauge, drain valve with plug, temperature not exceeding 50º Conload, oil filling hole with plug, four unidirectional roller, arcing horns, explosion vent, terminal arrangement bushing on H.V. side and cable box on LV side, first filling of oil up to desired level and transformer installing on existing structure with al lrequired materials arrangementas required ISI marked & as per IS specification, hand operated off load tap changer switch above 100 KVA, oil conservator with drain valve, plug 63 KVA and above.
Energy efficiency level -2 (New level -1)
42.69.1 Aluminium wound
42.69.1.3 100 KVA
2
188597
377194
... More
Dismantling of existing steel pole, R.S.Joist, girder with bracket clamp insulator or stay from the cement concrete foundation and making the site clear by refilling the pit to ground level i/c transportation to required destination with in township.
82
953
78146
... More
Dismantling of existing over head ACSR, AAAC, GI, conductor and making the site clear i/ c transportation to required destination within township.
3500
3
10500
... More
HAND PUMP SHIFTING
Drilling of perfectly vertical bore hole of a diameter to receive 125 mm nominal diameter casing pipe up to desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 125 mm nominal diameter M.S./G.I/U.P.V.C..casing pipe indies the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete.
(a) In all type of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders etc
39.1
580
22678
... More
Drilling of perfectly vertical bore hole of a diameter to receive 125 mm nominal diameter casing pipe up to desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 125 mm nominal diameter M.S./G.I/U.P.V.C..casing pipe indies the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete.
(b) In all types of rocks.
0.3
685
205.67
... More
Providing & Supplying I.S.I. marked G.I. casing pipe medium class in 4 to 7 meter length one end of fitted with socket as per I.S.I. 1239 (Part-2) 1992 with iv revision (Up to amendment)
125 mm diameter
30
932
27960
... More
Drilling of perfectly vertical bore hole of 115 mm. diameter up to desired depth below ground level in all types of rocks including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete.
114.6
640
73347.44
... More
Conducting the yield test of development of tube well by operating the drawl continues for the desired time period in measuring the discharge for drilling of tube well for the purpose of installation of H.P. only done manually for 4
2
522
1044
... More
Providing & Supplying of I.S.I. marked deep well hand pump complete with 1ne nos. MS connecting rod (12 mmx3 m. long) Normal stand assembly
2
6500
13000
... More
Providing & Supplying of I.S.I. marked 32 mm dia G.I. Riser pipe in 3 meter length with seamless socket on one end as per I.S. 1239 (Part-I) 1990 up-to-date amendments and socket as per amendments
60
190
11439
... More
Labour charges for installation of India Mark II Hand Pump with 30 meter long 32 mm dia. Riser pipe assembly and all other accessories including transportation of Hand Pump from specified departmental stores to site.
2
932
1865.28
... More
Construction of 76 cm x 76 cm x 40 cm foundation block in 1:2:4 cement concrete for fixing the pedestal of Hand Pump including excavation , cost of material and labours etc. complete.
2
1031
2062.48
... More
Construction of cement concrete platform as per design around the hand pump in 1:2:4 cement concrete including excavation, centering, shuttering, cost of all the materials and labours and curing etc. complete.
2
5452
10904
... More
Construction of cement concrete drain as per Unicef design in 1:2:4 cement concrete including excavation, centering, shuttering, cost of all the materials and labour and curing etc. complete.
6
426
2561.28
... More
Construction of 1.20 cm x 1.20 cm x 0.20 m cement concrete washing platform in cement concrete 1:2:4 including excavation, centering, shuttering, cost of all the materials and labour and curing etc. complete.
2
1668
3336.16
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements