Public Works Department Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Public Works Department - PWD Tender
Opening Date28 Jul 2018
Closing Date28 Jul 2018
Tender Amount₹ 28,95,000
Costs
EMD
₹ 50,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
PWD/TENDER NO -57137-1Tender No
PWD/TENDER NO -57137-1Tender Authority
Public Works Department ViewPurchaser Address
-
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed.
-
-
-
Ordinary rock
2.25
411
182.7
Extra for every additional lift of
1.5 m or part thereof in excavation. (No extra lift is payable if work is done by
19.69
532
27
Ordinary or hard rock.
2.25
107
47.7
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level : M 15
-
-
-
With 40mm nominal size graded stone aggregate.
5.38
21319
3962.7
M I5 Grade concrete
-
-
-
With 20mm nominal size graded stone aggregate.
-
-
-
M 15 – Grade concrete
2.89
11621
4023.9
Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate excluding the cost of centering, shuttering, finishing and reinforcement All work up to plinth level :
-
-
-
M 20 Grade Concrete
26.22
120119
4581.9
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
Foundations, footings, bases of columns, etc. for concrete up to plinth level.
49.3
7720
156.6
Column Footing
-
-
-
Walls (any thickness) including attached pilasters butteresses, plinth beams and string
104.46
25102
240.3
Suspended floors, roofs, landings, balconies and access platform.
42.2
10027
237.6
Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
-
-
-
Transportation By Mechanical Transport including loading , unloading and stacking.
-
-
-
Earth Lead 5 km
45.59
8495
186.34
Supplying and filling in plinth with hard muram/ hard copra having MDD not less than 2.0 t/cum under floor including watering, ramming and compacting (minimum copaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete.( Note maximum thickness of this layer to be provided shall be 30cm.)
19.87
5365
270
Supplying and filling in plinth with Soil (other than BC soil) having MDD not less than 1.85 t/cum under floor including watering, ramming and compacting (minimum copaction 95% of MDD) in layers not exceeding 15cm in thickness and dressing complete.
-
-
-
supply and filling in plinth with crusher stone dust / coarse sand under floor including watering, ramming and compacting in layers not exceeding 20cm in depth and dressing complete. (Note maximum thickness this layer to be provided shall be 20cm.)
8.66
5238
604.8
Providing and laying 60mm thick factory made cement concrete nterlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in- charge.
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of cementing and shuttering All work up to plinth level.
-
-
-
Nominal Mix 1 Cement : 3 sand : 6 graded stone aggregate (M I0)
-
-
-
4.3 Centering and shuttering including strutting, propping etc. and removal of form work for :
-
-
-
Foundations, footings, bases for columns.
5.63
856
152.1
Reinforced cement concrete work (with 20mm nominal size graded stone aggregate in walls (any thickness), including attached pilasters, uttresses, plinth and string courses, fillets, columns, pillars, posts and
-
-
-
M 20 Grade Concrete
17.23
80667
4681.8
Reinforced cement concrete work (with 20mm nominal size graded stone aggregate) in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level and up to floor two level excluding the cost of centering, shuttering, finishing and reinforcement in concrete
-
-
-
M 20 Grade Concrete
21.09
100296
4755.6
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding up to floor two level including cost of binding wire all wastage and lappages / overlaps (Overlaps shall be provided as per requirement of IS 13920, IS 456 & SP 34) etc. complete.
(Note: Spacer Bars (Chairs) shall be paid seperately as shown in the drawings and as per direction of Engineer-in-Charge.)
-
-
-
ThermoMechanically Treated bars.(TMT) Kg
7489.99
364014
48.6
Centering and shuttering including strutting, propping etc.
-
-
-
Lintels, beams, columns, girders, bressumers and cantilevers with water proof ply 12mm thick (item to be executed with prior permission of S.E. in case of B & R works and from Additional Project Director in case of PIU works)
289.7
89430
308.7
Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12mm thick. (item to be executed with prior permission of S.E. in case of B & R works and from Additional Project Director in case of PIU works)
113.27
38840
342.9
Weather shade, Chajjas, corbels etc., including Edges.
24.39
9900
405.9
Stairs, (excluding landings except spiral Staircases.
18.62
5564
298.8
Extra for providing and mixing water proofing material as per IS standard in cement concrete work quantity as prescribed by the manufacturer.
23.23
920
39.6
Finishing walls with water proofing cement paint of required shade :
-
-
-
New work (Two or more coats applied @ 3.84 kg/10 sqm).
161.21
6964
43.2
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work :
-
-
-
25 mm dia. nominal bore
50
11835
236.7
32 mm dia. nominal bore
50
13950
279
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
25 mm nominal bore
2
875
437.4
32 mm nominal bore.
2
1004
502.2
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)
-
-
-
25 mm nominal bore
2
284
142.2
32 mm nominal
2
367
183.6
Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:128942002,
-
-
-
having 50 kg I cmz average compressive
strength .
-
-
-
Cement mortar 1:6 (1 cement :
46.95
187342
3990
Half brick masonry with fly ash lime Gypsum bricks (FALG bricks) conforming to IS 12894, m super structure above plinth and upto floor two level.
-
-
-
having 50 kglcm2 average compressive strength.
-
-
-
Cement mortar 1 : 4 (1cement : 4 sand).
64
29376
459
12 mm cement plaster of mix :
-
-
-
1:6 (1 cement : 6 sand)
69.81
6911
99
Extra for providing and placing in position 2 Nos. 8mm dia. M.S. bars at every third course of half brick masonry.
64
7315
114.3
Providing and fixing pressed steel door frames conforming to IS: 4351 manufactured from commercial mild steel sheet including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60 mm pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges, 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified filling the frame with Cement Concrete 1:3:6 at site before fixing (cost of concrete to be paid separately) and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:
-
-
-
Profile C of 1.60mm thick single rebate of size 100mmx50mm
-
-
-
Fixing with adjustable lugs with split end tail to each jamb.
22.2
8619
388.26
Providing and fixing in position factory made precast RCC M-40 doors and windows frames having excellent smooth finish as per IS: 6523 with reinforcement of 3 Nos, 6 mm dia main bars tied with 3 mm M.S stirrups placed @ 200 mm C/C and 6 numbers high strength polymer blocks of required size for fixing hinges including providing 6 no specially designed M.S. galvanised sleeves for accomodating 6 mm dia fully threaded bolts for fixing hold fast on vertical members, providing suitable arrangement for recieving sliding door bolts and tower bolt etc all complete, as per the direction of Engineer in charge. (The cost of hold fast and Cement Concrete block of 1:3:6 (1 Cement : 3 sand : 6 Graded stone agreegate 20mm nominal size) mix is also included in the item.) The frame shall be measured in running meter correct to two places of decimal.
-
-
-
Door frame 100mmx 60 mm
5.2
1502
288.9
Providing and fixing lSI marked flush door shutters confonning to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of such as duro board, century or equivelant make.
-
-
-
30 mm thick including lSI marked Stainless Steel
9.48
31227
3294
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
9.48
3421
360.9
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
9.48
990
104.4
Providing and fixing glass panes/ steel sheet/ Fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete.
-
-
-
with 1mm thick Galvenised steel sheet i/c 10mmx10mm x1.6mm box beading.
0.64
539
842.4
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire
-
-
-
With 2nd class teak wood beading 62x19 mm.
27.94
42472
1520.1
Providing and fixing factory made100% solid PVC flush door shutter made from coextruded three layer rigid PVC foam sheet (single Extruded) with density not less than 600 kg/cum outer layers 1 mm thick to be rigid UPVC with density of not be less than 1400 kg/cum manufactured by an ISO: 9001-2000 certified company
-
-
-
24 mm thick plain soild PVC flush door shutter
1.76
3960
2250
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling,
-
-
-
For fixed portion.
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
194.6
66028
339.3
For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
116.76
44661
382.5
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin charge . (Cost of aluminium snap beading shall be paid in
-
-
-
With float glass panes of 4.0 mm thickness
19.46
14869
764.1
Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineerincharge
-
-
-
Upto 5mm depth and 5 mm width
38.4
2834
73.8
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer.
-
-
-
M.S. tube.
120
11923
99.36
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
In gratings, frames, guard bar, ladder, railings, brackets, gates
31.5
2413
76.59
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
-
-
-
Fixed to steel windows by welding.
323.4
26486
81.9
Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3mm and nuts and bolts complete.
-
-
-
Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides
19.46
11318
581.58
Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete.
4
405
101.16
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick
M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia.
-
-
-
Providing and fixing chicken mesh as per lSI specification and in the required width with 50mm long Bombay nails on vertical and horizontal junctions of RCC and brick wall including scaffolding and all lead and lift etc. complete before plastering upt 10 meter height.
-
-
-
6 mm cement plaster of mix :
-
-
-
1:3 (1 cement: 3 sand)
99.01
8554
86.4
12mm cement plaster of mix :
-
-
-
1:6 (1 cement: 6 sand)
167.97
16629
99
15 mm cement plaster on the rough side of single or half
-
-
-
1:6 (1 cement: 6 sand)
407.55
46950
115.2
Providing gola 75x75 mm in cement concrete 1:2:4 (1
cement: 2 sand : 4 stone aggregate 10mm and down
-
-
-
In 75x75mm deep chase
11.9
1060
89.1
12 mm cement plaster finished with a floating coat of neat cement ofmix:
-
-
-
1:4 (I cement: 4 sand)
30.65
4165
135.9
Providing for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
119.9
1996
16.65
Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded (wherever required) and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in flooring laid over 20mm thick base of cement mortar 1:4 (!cement : 4 sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineerin Charge.
-
-
-
Area of slab more than 0.50 sqm.
-
-
-
Fine grained dark Black/ dark Red/ White with self design / pattern/ crystals of other colours or glitter.
32.41
69422
2142
Granite work gang saw cut (polished and machine cut) of thickness 12 mm for wall lining , skirting, risers of steps and dado (veneer work), back filling with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 sand) including pointing with white cement mortar 1 : 2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade :(To be secured to the backing by means of cramps, which shall be paid for separately).
-
-
-
Area of tiles not less 0.18 sqm.
-
-
-
Fine grained dark black / dark red / white with delf design / pattern / crystals of other colours or glitter
1.55
3063
1976.4
Kota stone slab flooring over
20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 sand) :
-
-
-
25 mm thick.
75.07
51686
688.5
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
-
-
-
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
24
842
35.1
Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness 9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand)
including pointing the joints with white cement and matching pigments etc., complete.
-
-
-
Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 12 mm thick Cement Mortar 1:3
(1 Cement: 3 sand) including pointing the joints with white cement and matching pigments etc., complete.
-
-
-
Providing and laying Antiskid endura floor tiles of any sizes, 12 mm thickness with water absorption's less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (I cement :4 sand) including grouting the joints with white cement with matching pigments etc., complete.
-
-
-
Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. samples approved by Engineer-in-charge.
-
-
-
Granite of any colour and shade
6.31
13380
2120.4
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufact urer, Like birla white /JK white or equivalent, over the plastered wall surface to prepare the surface even and smooth ilc all cost of material, labour and scaffold etc in all position complete.
-
-
-
Finishing walls with Deluxe Multi surface paint system for interiors and exteriors
-
-
-
Two or more coats applied on walls @ 1.25 ltr/10 sqm. over and including one coat of
659.09
48048
72.9
Painting with synthetic enamel paint of approved
brand and manufacture to give an even shade :
-
-
-
Two or more coats on new work
15
716
47.7
Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete :
-
-
-
300x16 mm
8
2801
350.1
250x16mm
2
587
293.4
Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete :
-
-
-
125 mm
12
648
54
Providing and fixing ISI marked stainless steel tower bolt black finish, (Barrel type) with necessary screws etc. complete :
-
-
-
200x10 mm
12
1004
83.7
Providing and fixing Stainless steel hanging type floor door stopper with necessary screws, etc. complete.
5
464
92.7
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level :
-
-
-
1:2:3½:9 (1 ordinary portland cement : 2 Fly ash : 3½ sand: 9 graded stone aggregate 40 mm nominal size)
0.82
2553
3113.1
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions ofW.C., kitchen and the like consisting of : 4 1st course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. 5 llnd course of20mm cement plaster 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. 6 Illrd course of
-
-
-
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying :
a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.
b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.
c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around.
-
-
-
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor
-
-
-
With 20mm nominal size
-
-
-
M I5 Grade concrete
0.72
3055
4242.6
Centering and shuttering including strutting, propping etc. and removal of form work for :
-
-
-
Columns, pillars, posts and struts.
5.4
1730
320.4
Extra for R.C.C. work above floor two level for each floors or part thereof.
-
-
-
Extra for R.C.C. work above floor two level for each floors or part thereof.
0.72
31
42.43
Add extra for providing reinforcement above Floor two level for every additional floor
1269.92
229
0.18
Extra for brick work in superstructure above floor two level for each additional floor or part thereof respective item.
11.31
936
82.8
Grading roof for water proofing treatment with
-
-
-
Cement concrete 1:2:4 (1
cement: 2 sand: 4 graded stone aggregate 20 mm nominal size)
2.88
11843
4112.1
Neat cement punning
57.6
1555
27
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, uPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS
: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
-
-
-
White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.
1
2696
2695.5
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete.
4
562
140.4
Providing and fixing white vitreous china pedestal type water closet (European type
W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid
2
5465
2732.4
Providing and fixing CP jet assembly to including connection etc
complete.
2
675
337.5
Providing and fixing toilet paper holder :
-
-
-
C.P. brass
2
612
306
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting
-
-
-
White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap.
4
7873
1968.3
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
Flexible pipe
-
-
-
32 mm
7
548
78.3
Providing and fixing PTMT bib cock of approved quality and colour.
-
-
-
15mm nominal bore, 86 mm long. Weighing not less than 88 gms.
3
467
155.7
Providing and fixing PTMT stop cock of approved quality and colour.
-
-
-
15 mm nominal bore, 86mm long. Weighing not less than 88 gms.
3
467
155.7
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved
-
-
-
15 mm nominal bore..
3
1393
464.4
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
-
-
-
15 mm nominal bore
3
1469
489.6
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
Kitchen sink with drain board
-
-
-
510x1040 mm bowl depth 250mm.
1
4125
4124.7
Providing and fixing C.P. brass shower rose with 15 or 20 mm
-
-
-
100 mm diameter
3
1431
477
Providing and fixing CP brass towel rail of approved quality
-
-
-
450x20mm
3
2257
752.4
Providing and fixing CP brass soap dish of approved quality
3
1139
379.8
Providing and fixing PTMT grating of approved quality
-
-
-
Circular type.
6
297
49.5
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and
-
-
-
Rectangularshape453x357mm
3
1733
577.8
Providing and fixing uPVC trap of self cleaning design complet. Including cost of cutting and making good the wall and floors.
-
-
-
100 mm inlet and 75 mm outlet
3
1396
465.3
Providing and fixing on wall face Unplasticised PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
-
-
-
Single tee with door
-
-
-
110x110x110 mm
2
623
311.4
Single tee without door
-
-
-
110x110x110 mm
4
958
239.4
Bend 87.5°
-
-
-
110 mm bend (minimum wall thickness 2.2mm)
4
619
154.8
Providing and fixing soil, waste and vent pipes :
-
-
-
100 mm dia. Pipe minimum wall thickness 5mm
-
-
-
Centrifugally cast (spun) iron socket and spigot (SandS) pipe as per IS: 3989.
16
13752
859.5
Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1 cement : 2 sand) in S.C.I./ C.I. Pipes :
-
-
-
100 mm dia pipe
15
621
41.4
Providing and fixing M.S. holderbat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. :
-
-
-
For 100 mm dia. Pipe
15
891
59.4
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
-
-
-
100 mm dia minimum wall thickness 6.5mm
-
-
-
Sand cast iron SandS as per IS 3989
5
1836
367.2
Providing and fixing plain bend of required degree.
-
-
-
100 mm dia minimum wall thickness 6.5mm
-
-
-
Sand cast iron SandS as per IS : 3989
5
1557
311.4
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at
1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the
-
-
-
25 mm nominal outer dia .Pipes.
15
3888
259.2
32 mm nominal outer dia .Pipes.
20
6480
324
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. External work
-
-
-
32 mm nominal outer dia.Pipes.
10
2142
214.2
40 mm nominal outer dia .Pipes.
10
2916
291.6
50 mm nominal outer dia .Pipes.
20
8964
448.2
Providing and fixing CPVC gate valve with knob of approved
-
-
-
32 mm nominal bore
2
900
450
40 mm nominal bore
2
1051
525.6
50 mm nominal bore
2
1348
674.1
Providing and fixing gun metal non return valve of approved quality (screwed end):
-
-
-
32 mm nominal bore..
-
-
-
verticle
1
644
643.5
40 mm nominal bore
-
-
-
Vertical
1
891
891
50 mm nominal bore
-
-
-
Vertical
1
1217
1217.2
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming. watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (No extra lift is payable if work is done by mechanical means)
-
-
-
Pipes, cables etc. Exceeding 80 mm dia. but not exceeding 300 mm dia
20
2808
140.4
Cutting holes upto 15x15 em in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof.
4
464
116.1
Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design.
-
-
-
Supplying, filling, spreading and leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads and lifts, all complete as per direction of Engineerincharge.
-
-
-
Supplying, filling, spreading and leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads and lifts, all complete as per direction of
-
-
-
Supplying, filling, spreading and leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads and lifts, all complete as per direction of Engineerin charge.
-
-
-
Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed
-
-
-
110 mm diameter (minimum wall thickness 3.2mm)
-
-
-
Providing and fixing on wall face Unplasticised PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal
-
-
-
Coupler
-
-
-
110 mm (minimum wall thickness 2.2mm)
5
693
138.6
Single tee without door
-
-
-
110x110x110 mm (minimum wall thickness 2.2mm)
5
1197
239.4
Bend 87.5°
-
-
-
110 mm bend (minimum wall thickness 2.2mm)
5
774
154.8
Providing and fixing Unplasticised PVC pipe clips of approved design to Unplasticised PVC rain water pipes by means of bombay nail of required length including
-
-
-
110 mm (minimum wall thickness 2.2mm)
200
20520
102.6
Boring/drilling bore well of required dia perfectly vertical to receive casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata,
preparing and submitting strata chart/bore log, including hire and running charges of all equipments, tools, plants and machineries required for the job, all complete as per direction of Engineer –in charge, upto 90 metre depth
-
-
-
All types of soil
-
-
-
200 mm dia.
75
30443
405.9
Rocky strata including Boulders.
-
-
-
200 mm dia.
15
9315
621
Boring/drilling bore well of required dia perfectly vertical to receive casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata,
preparing and submitting strata chart/bore log, including hire and running charges of all equipments, tools, plants and machineries required for the job, all complete as per direction of Engineer –in charge, Beyond upto 90 metre
-
-
-
Rocky strata including Boulders.
-
-
-
200 mm dia.
40
25776
644.4
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings and accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
-
-
-
200 mm nominal dia(minimum wall thickness 10mm)
75.3
37883
503.1
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:
-
-
-
200 mm dia
1
439
439.2
Providing and fixing M.S. clamp of required dia made of 100 x10 mm flat to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts and nuts of required size complete.
-
-
-
200 mm clamp.
1
1153
1152.9
Providing and placing in position hand pump of India mark II ofapproved quality for 40 mrn diameter G.I. pipe complete with all accessories.
1
757
756.9
Providing and placing in position filters of 40 mm diameter G.I. pipe with brass strainer of approved quality.
-
-
-
Filter of 32 mm dia meter
130
63765
490.5
Providing and fixing of unplasticised rigid PVC rain water harvesting filter kit including filter of 160 mm diameter wall thickness 3.2mm for pvc valve 110mm diameter, UV protected conforming to IS:13592 with working pressure 6kg/sqcm Type b, capacity 40 kiloliter/hour "jal santosh" make or equivalent
and including all accesories like unplasticised PVC clips of approved design with bombay nails of required length including making good the wall etc complete for catchment area of 200 sqm.
1
9627
9627.3
borewell adaptor for connecting rain water harvesting pipe line to borewell borewell adaptor 110mm "jal santosh" make or equivalent
2
540
270
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast
R.C.C. horizontal grating with frame complete as per standard design :
-
-
-
With well burnt bricks
2
7094
3546.9
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand :
4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement :
4 sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size)
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
With well burnt bricks
2
14395
7197.3
Deduct for not provide C.I. manhole cover with frame for item No. 19.9.1.1 & 19.9.1.2
-2
-3555
1777.5
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete :
-
-
-
150 mm dia. R.C.C. pipe
20
5130
256.5
Providing and fixing square mouth S.W. gully trap class SP1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :
-
-
-
150 x 100 mm size P type.
-
-
-
With well burnt bricks
2
3245
1622.7
Providing & Fixing of Precast RCC drain cover of size 600x450 x70mm (thickness) with 4 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete.
4
1260
315
Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth up to 1.5 m including getting out the excavated materials, refilling the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as
-
-
-
Pipes, cables etc. exceeding
80 mm dia but not exceeding 300 mm dia.
20
6192
309.6
Construction of manualy operated fire based incinerator for girls-toilet i/c (i) Fire and ash collection chamber 0.60 m X 0.60 m., made of calcium silicate bricks, having 12 mm dia steel bars grating @ 10 cm c/c, i/c MS mesh welded on top including 300mm X 450mm MS openable door of half grill and half MS Plate (3mm thick). (ii) 0.80 m X 0.80 m incinerator chamber made of calcium silicate bricks with R.C.C.top having opening of size 0.40m X 0.40 m, for stacking of sanitary napkins
(iii) 0.40 m X .040 m duct made of 1.6 mm thick MS sheet for dropping napkins from the toilet opening.
-
-
-
(iv)150mm dia Class 'C' heavy duty MS pipe conforming to IS 3589/1239 for gas emission with cowel, up to 2.10 meter height above terrace level.
-
-
-
(v)Opening in wall having MS flap (1.6mm thick) of size 0.25X 0.25 m, finished with granite etc complete as per standard drawing no. 5313-B-NB4-9919-R1 dated 21.02.2017
-
-
-
For Ground floor & Ist floor buildings.
1
32115
32115
15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :
-
-
-
1:4 (I cement: 4 sand)
104.55
16090
153.9
Embankment Construction with Material Obtained from Borrow Pits Construction of embankment with approved material having CBR7 obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-1, 300-2 and as per relevent clauses of
section-300.
-
-
-
Crusher Run Macadam Sub Base/Base Course Providing crushed stone aggregate, depositing on a prepared surface by hauling vehicles, spreading and mixing with a motor grader, watering and compacting with a vibratory roller to clause 410 to form a layer of sub-base/Base in accordance to Table No.
400-14, 400-15 and as per clause of section 407 of specifications.
(ii) For 37.5 mm maximum size
-
-
-
Construction of dry lean cement concrete Sub base over a prepared subgrade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600 1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor, compacting with 810 tonnes
-
-
-
6.2 Deduct from Item No.6.1 above if paver with electronic sensor, vibratory roller are not used and laying, compaction is done by any other method. (The acceptance criteria regarding level, thickness, surface regularity, texture finish, strength of concrete and all other quality control measures shall be the same as in case of machine laid work.) .
-
-
-
Cement Concrete Pavement (Construction of unreinforced, dowel jointed, plain cement concrete pavement M30 grade concrete over a prepared sub base with cement , coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints,
-
-
-
6.5 Deduct from Item No.6.3 &
6.4 above if paver with electronic sensor is not used and laying, compaction is done by any other method (The acceptance criteria regarding level, thickness, surface regularity, texture finish, strength of concrete and all other quality control measures shall be the same as in case of machine laid work.)
-
-
-
Construction of Shoulders with approved material/selected soil i/c excavation all lifts & leads i/c grading to required slope & camber of 4% and compacting using vibratory roller of 80 to 100
kN static weight to meet requirement as per relevant
-
-
-
B Hard Shoulders (CBR value 12)
22.2
4018
181
Add extra in Item No.6.3, 6.4, 6.6 & 6.10 above for the cost of steel in dowel bar and tie rod including craddle, laps etc. complete required as per design.
-
-
-
I) Mild steel
0.06
2356
39259
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
-
-
-
TOTAL A CIVIL AMOUNT
-
2530412
-
Point wiring (excluding metallic switch box & sheet but including switches,sockes,lamp,holders,ceiling roses etc) with 1.5 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI Marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit etc. as required as per specification for :-
-
-
-
Light Point/Fan Points.
-
-
-
a) Short point
10
3546
354.6
b) Medium point
15
9059
603.9
c) Long point
30
29241
974.7
3 Pin 6 Amp socket outlet on Separate Board
-
-
-
b) Medium point
2
1404
702
c) Long point
6
6437
1072.8
Twin Control light points
-
-
-
C) Long point
2
2313
1156.5
Point wiring (excluding metallic switch box & sheet but including switches, sockets) for 3 pin 6 Amp. Socket outlet point with 1.5 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit with required materials as per specification on same board .
9
2309
256.5
Wiring for circuit wiring with PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) of ISI marked suitable size etc. as required as per specification
-
-
-
2x2.5 Sq.mm.
50
5265
105.3
4x2.5 Sq.mm.
30
4752
158.4
6x2.5 Sq.mm.
15
3038
202.5
8x2.5 Sq.mm.
5
1247
249.3
Point wiring (excluding metallic switch box & sheet ) for 3 Pin 16 Amp. Socket Outlet Point With 4 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in Concealed rigid P.V.C Conduit (HMS) ISI Marked of suitable size etc. with 16 Amp. F.T. Switch & Socket / S.S.Combined 6/16 Amp. of ISI Marked and 4 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit as per specification for
-
-
-
On Separate Board
-
-
-
C. Long Point
3
5211
1737
D. Extra Long –I
3
9226
3075.3
E. Extra Long-II
3
11321
3773.7
Supplying and fixing PVC conduit ISI marked along with the accessories in concealed system etc. as required
-
-
-
PVC . Conduit 20 mm (HMS)
10
549
54.9
PVC . Conduit 25 mm (HMS)
10
648
64.8
Supplying and fixing of approved make modular type metal box with modular frame/ base plate and cover plate including fixing in concealed / surface excluding switch,socket etc. as required for:-
-
-
-
1 Or 2 Module
2
281
140.4
3 Module
18
3370
187.2
6 Module
3
880
293.4
8/9 Module
3
1080
360
12 Module
12
5260
438.3
Supplying and drawing single core PVC insulated cable FR with copper multi strand conductor ISI marked in existing rigid PVC Casing-N-Capping / conduit in surface or concealed as per specification.
-
-
-
1 X 1.5 sq mm
-
-
-
(c) 3 X 1.5 sq mm
10
459
45.9
1 X 2.5 sq mm
-
-
-
(a) 1 X 2.5 sq mm
100
2700
27
Wiring for sub-mains with PVC insulated cable FR with copper multi strand conductor ISI marked in recessed / concealed rigid PVC conduit (HMS) ISI marked of suitable size(Conduit included) including 2mm thick accessories, connection etc ,as required as per specification
-
-
-
4 WIRE SUB-MAIN
-
-
-
6.0 sq mm cable in 25 mm conduit
20
4644
232.2
Supplying of ISI Marked and approved make of Moulded Case Circuit Breaker (MCCB) suitable for 3 phase,3 pole, 50 Hz, 415 Volts, AC supply with respective interrupting capacity (KA) at 415 Volts cited against their range standard conforming to IS - 8828
-
-
-
MCCB with Breaking Capacity 10 KA at 415 V
-
-
-
Current Rating -25 to100 Amps
1
1524
1523.7
Supplying of ISI Marked and accepted standard of Miniature Circuit Breaker (MCB) of 'C' series suitable for 240/415 Volts, 50 Cycle , 10 kA Value AC supply confirming to IS : 8828 : 1996, IEC : 60898 :2002 but without enclosures :-
-
-
-
SINGLE POLE (SP)
-
-
-
6 Amp to 32 Amp Rating
18
3321
184.5
FOR TRIPLE POLE & NEUTRAL(TPN)
-
-
-
50 Amp to 63 Amp Rating
2
3659
1829.7
Supplying of approved make, powder coated Metal Double Door Vertical TPN MCB DB IP 43 protection with provision for MCCB up to 160A TP/ FP 36kA as incomer and space for SP/TP MCBs as outgoing (without MCCB / MCBs) inclusive of bus bar & connections etc
-
-
-
4 way without MCCB
2
15338
7668.9
Fixing of MCB /MCCB/ Isolator in sheet steel enclosure as required as per accepted practice, including mounting on busbar and cable connection etc. complete (Labour only )
-
-
-
MCB / Isolator SP/DP
21
208
9.9
MCB /MCCB Isolator TP /TPN/FP
3
59
19.8
Labour charges for fixing sheet steel enclosures, MCB DB flush mounting type, as per accepted practice, duly embedded and end plate completely flushed in wall, cable connection etc.complete :-
-
-
-
FOR S.No :-
-
-
-
27.8.4 & 27.8.5 ; 27.9.2 to 27.9.3 ; 27.10.1 to 27.10.3 & 27.11.1 to 27.11.3
2
488
243.9
Supplying and fixing as per specification Call bell / buzzer of approved make with necessary materials complete.
-
-
-
Ding Dong bell
1
96
96.3
Supplying, Fixing and Testing of Compact Fluorescent Lamp (CFL) with inbuilt electronic ballast ISI marked BC / ES cap of approved make as required as per specification
-
-
-
5 Watt
10
1449
144.9
15 Watt
10
1746
174.6
85 Watt
4
2995
748.8
Supplying and fixing of approved make step type Modular electronic Fan regulator including connection etc. as required on existing board
-
-
-
100 Watt (2 module)
8
4961
620.1
Supplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts including connections with all necessary material complete of approved as required confirming to IS :374/1979 with up to date ammendments.
-
-
-
Ceiling Fan (5 star & ISI)-1200 mm Sweep
7
14339
2048.4
Ceiling Fan ( ISI )-1400 mm Sweep
1
2357
2357.1
Supplying, erecting and testing of approved make Exhaust Fan heavy duty with mounting frame, blades AC 230-250 complete connection and including, frame bolt/ Anchor hole fastners etc. complete finished of approved as required.
-
-
-
300mm sweep 900 RPM
5
13131
2626.2
Supplying, fixing & testing of approved make T- 5 lamp channel luminary with epoxy white powder coated CRCA sheet steel housing box type channel with reflector cover including electronic ballast (HF), PF 0.95, THD 30% complete duly wired (with tube rod) as per specification & fixing as below:
-
-
-
I) Fixing on wall/Ceiling on PVC plate Anchor fasteners and other necessary materials including connections etc. and as required.
18
18986
1054.8
Supplying, fixing & testing of approved make CFL street light fitting consisting of metallic sheet aluminium alloy housing, highly polished aluminium reflector clear acrylic cover, gasket and equipped with accessories; such as lamp holder (without lamp) suitable for end mounting duly wired, including fixing with 32 / 38 mm dia G.I. pipe Light 'A' class of required length upto 2 Meter for mounting on wall/existing pole/on existing D bracket including bending the pipe to required shape and connections including all materials as required
-
-
-
Up to 85 watt CFL
4
8111
2027.7
Providing and fixing circular/Hexagonal cast iron or M.S.sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S. sheet box by mean of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing.
8
1008
126
Earthing with G.I. Earth plate 600mm X 600mm X 6mm thick including accessories and providing masonary encloser in cement mortor, cover plate having locking arrangement on the top and G.I. watering pipe 20mm dia 2.7 Metre long etc. (but without charcoal or coke and salt ) complete as required.
2
5312
2655.9
Add Extra for using salt and charcoal / coke for G.I. Plate or Copper plate earth electrode as required including excavation & refilling.
2
3314
1656.9
Providing and fixing 6 SWG (5.6mm) G.I. wire on surface or in recessed/concealed for loop earthing as required.
20
342
17.1
Supplying and drawing PVC insulated copper cable ( Earth Continuity Conductor ) of Green colour FR with copper multi strand conductor ISI marked in existing conduit along with other wires as required as per specification :
-
-
-
6 Sq mm.
20
1044
52.2
Supplying & Installation of required capacity of single phase, 50 Hz,220V, deep well submersible pump Stainless Steel body, as per IS of approved Make, suitable for 4"/6 " tube well with Control Panel Starter suitable for Submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications but excluding Pipe, SS/Nylon wire rope and connection cable.
-
-
-
2 H.P. with 25 stages, Head Mt 163-58, Discharge LPM 10- 45
1
32738
32738.4
Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make.
-
-
-
4.0 Sq.mm multi strand
220
36630
166.5
Supplying and laying of approved Make HDPE pipe as per IS : 4984 and IS : 14333 with latest amendment for installation of submersible pump with necessary connection, socket/couplings, Tees,etc. as required (PE-63 & working Pressure 10 kgf/sq cm)
-
-
-
32 mm Outer Dia
170
17595
103.5
Supplying and laying of approved Make Nylon rope 12 mm thick complete with binding for support of pump and motor.
160
10800
67.5
Supply of XLPE Insulated power cable (confirming IS-7098 Part-I ) 1100 Volt grade, 1 core /2 core /3½ core/4 core ISI MARKED with Alu. Stranded /solid conductor
-
-
-
ARMOURED 2 Core
-
-
-
10 Sq.mm.
60
7182
119.7
4 CORE ARMOURED
-
-
-
16 Sq.mm.
150
26595
177.3
Supplying and fixing cramping type Alum. lugs as per I.S.S. Specification suitable for following size of cable with Alu. /Copper solid/stranded conductor evently cramped with high/pressure tool and connected to switch gear/Bus/M.C.C.B./ M.C.B. etc. as required complete.
-
-
-
For Conductor Size-
-
-
-
6mm to 16 Sq.mm
8
14
1.8
Suppying & installing G.I. Pipe for protection of underground cable fixed on wall/support/in trench/fixed between two rigid existing support of wall/beam for erection of ceiling Fan/down rod for stiff pendent for light luminaries /fan/protective for earthing, lightening conductor down strip/overhead service line/for submersible cable or centrifugal pump for water supply with necessary iron clamp coupler, bend, tee, elbow, nuts and bolts etc. complete in an approved manner as required to complete excluding cost of excavation/dismentalling & other finshed masonary Item complete.
-
-
-
B' Class G.l. Pipe lSI Marked (IS-1161-69)
-
-
-
40.00mm
35
11057
315.9
Laying of one number armoured / unarmoured cable 1.1kV grade of size not exceeding 25 Sq.mm on wall/truss with approved type of iron clamps etc. as required.
40
1440
36
Laying of underground cable armoured./ unarmoured as per specification in air suspended on existing approved type of iron clamps, G.I wire 7/1.6mm & shackle insulator / insulated strip complete.
-
-
-
1/2 / 3 / 4 Core cable up to 16 Sq.mm
110
1089
9.9
Supply, fabrication and erection of Angle/Chanel/Flat iron fitting for over head line & sub-station etc such as 'D' bracket, cross arms, top clamp, 'V' cross arms, Back/Support clamps or other similar work etc. including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of aluminium paint as required as per specification.
28
1537
54.9
Total……………B
-
364705
-
Total……………A+B
-
2895117
-
SAY
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements