Public Works Department Tender

Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections,power pressed from M.S. sheets and galvanized with zinc coating of 120gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm,at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mmlong dry wall screws @ 230 mminterval, including fixing of gypsumboard to ceiling section and perimeterchannel with the help of dry wall screws of size 3.5 x 25 mm at 230 mmc/c, including jointing and finishing toa flush finish of tapered and square edges of the board with recommendedjointing compound , jointing tapes, finishing with jointing compound in 3layers covering upto 150 mm on bothsides of joint and two coats of primer suitable for board, all as permanufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers,cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification anddirection of the Engineer in Charge butexcluding the cost of painting with 12.58.2) 12.5mm thick tapered edge gypsum board 12.58.2.1)Plain board conforming to IS: 2095-Part I: 2011 (Board with BIScertification marks).

Providing and fixing 2nd class teak wood plain lining tongued and grooved including wooden plugs complete with necessary screws and priming coat on unexposed surface. 9.29.1)40 mm thick

Providing and Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality 9.134.2)1.0 mm thick.

Providing and Installation of acoustical wall panelling fabric finish hardened square edge, FR grade fabric (colour as approved by Egnineer in charge) wrapped soft fibre core (glass fibre) panel having metal framing, of size 600x2100x25mm having density 100-120Kgs/ m3, weight 3.0kg/m2 NRC up to 0.9 installed by using impaling clip. Impaling clips are attached directly to the wall/frame work with the points extending outward. Then panels shall positioned and pressed into place

Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm)of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mmthick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete

Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm)of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy,bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand) preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqmincluding pointing the joints with white cement and matching pigments etc., complete

Providing and fixing plain lining with necessary screws/nuts and bolts/ nails including a coat of approved primer on one face and fixed on wooden /steel frame work complete as per direction of Engineer-incharge.(Frame work shall be paid for separately) 9.150.1012 mm thick commercial ply conforming to IS: 1328 BWR type

Providing and fixing aluminiumwork for doors, windows,ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass /stainless steel screws, all complete as per rchitectural drawings and the directions of Engineer-in-charge. (Glazing,paneling and dash fasteners to be paid for separately) : 21.1.1)For fixed portion 21.1.1.1)Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868,Minimum anodic coating of grade AC15)

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I)decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. 9.18.2)30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body,door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing tiled false ceiling of specified materials of size 595x595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T"runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mmcenter to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mmcenter to center to form a grid of 1200x600 mm and secondary cross "T"of length 600 mm and size 24x25 mmmade of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings,fixtures, smoke detectors etc. Main "T"runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x25 x1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners,4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mmcenter to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre- painted withpolyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.59.5)Glass fiber Acoustical Suspended Ceiling System with 16 mm thick tegular edge or micro look edge tiles of size 595x595mm.The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥83%, Thermal Conductivity k =0.052 - 0.057 w/m K, Colour White,Fire Performance UK Class 0 / Class 1(BS 476 pt - 6 and7) in module size of 600 x 600 x 16mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38 - 41%. The Tile and Grid system used together should carry a 15 year warranty

Providing and installation of acoustical wall panelling wood finish Slats made out of HDF board,Melamine / veneer laminated finish, perforated wooden grooved slats (2mm grooves @ 8mmcenters) / (2mm Slats @16mm pitch) /(2mm grooves @ 32mm centers) / (2mmgrooves @ 64mm centers), backlined with black acoustical fleece, tongue-groove edge for a seamless look, FR grade, of lineal dimension size 128mm x 2440mm x 16mm thick having density 1000Kg /m3, weight 12.8Kgs/m2 installed by using GI strut system. The GI strut system includes GI Cross channel having thickness 0.45mm,length 3600mm, knurled web 40mm, depth 10mm and equal flanges 15mm is fastened vertically/ horizontally at every 600mmcenters. Aluminium core cross channel having thickness 0.5mm, length 2400mm,web 15mm and 27mm, depth 18mm and flanges of 7mm with suitable edge and centre brackets is then fixed perpendicular to the cross channel with the help of fasteners at every 400mm centers.Contractor to Provide expansion joints of 3mm at every 5mts bothways.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : 17.11.7)White Vitreous China Flat back wash basin size 450x300 mm with single 15mm C.P. brass pillar tap.

Providing and fixing white vitreous china pedestal type Anti germ Fluoro-Polymer Coated Water Closet with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propeline)made 80 mm thick concealed flushing cistern,flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. 25.2.1)Anti-germ Fluoro-Polymer Coated (nano coating)European W. C. pan Size 360X545X395 with solid poly propelyne made soft closing seat cover (Premium Range)

Providing and fixing in position best Indian Health Faucet with 8mm dia 1.2meter long Flexible Tube and wall bracket with N. R.V. (non-return wall).

Providing and fixing CP jet assembly to including connection etc complete

Providing and fixing C.P.brass bib cock of approved quality conforming to IS:8931and weighing not less than 400gm, 15 mm nominal bore.

Providing and fixing C.P.brass pillar cock approved quality and make conforming to IS:specification. and weighing not less than 650gm, 15 mmnominal bore 125 mm long foam flow.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineerin-Charge 18.6.2)Concealed work including cutting chases and making good the walls etc 18.6.2.1)15 mm nominal outer dia .Pipes

32 mm nominal outer dia .Pipes.

Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm) 17.58.2)110 mm diameter

Providing and fixing mirror of superior glass (of approved quality)and of required shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing 17.68.4)Rectangular shape 1500x450 mm

Providing and fixing toilet paper holder: 17.70.1)C.P. brass

Providing and fixing CP brass towel ring of approved quality and make 200mm dia ring

Providing and fixing CP brass soap dish of approved quality and make

Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mmgap for thermal expansion. 17.59.1)Coupler 17.59.1.2)110 mm

17.59.5) Bend 87.50 17.59.5.2)110 mm bend