Public Works Department Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Public Works Department - PWD Tender
Opening Date31 Aug 2018
Closing Date14 Sep 2018
Tender Amount₹ 1,46,79,000
Costs
EMD
₹ 1,46,800Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
PWD/TENDER NO -58329-1Tender No
PWD/TENDER NO -58329-1Tender Authority
Public Works Department ViewPurchaser Address
-
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
All kind of soil
723.67
84018
116.1
Earth work in excavation/ by
mechanical means (Hydraulic
Excavator)/ manual means over
areas (exceeding 30 cm in depth,
1.5m in width as well as 10 sqm on
plan) including dressing of sides
and ramming of bottom disposal of
excavated earth, lead up to 50 m
and lift up to 1.5 m, disposed earth
to be levelled and neatly dressed.
-
-
-
Ordinary rock
2.18
398
182.7
Excavating trenches of required
width for p1pes, cables, etc
including excavation for sockets,
and dressing of sides, ramming of
bottoms, depth up to 1.5 m
including getting out the excavated
soil, and then returning the soil as
required, in layers not exceeding 20
cm in depth including consolidating
each deposited layer by ramming.
watering, etc. and disposing of
surplus excavated soil as directed,
within a lead of 50 m : (No extra lift
is payable if work is done by
mechanical means)
-
-
-
Pipes, cables etc. exceeding 80mm dia. but not exceeding 300mm dia
50
7020
140.4
Filling available excavated earth
(excluding hard rock/Ordinary
rock) in trenches, plinth, sides of
foundations etc. in layers not
exceeding 20cm in depth,
consolidating each deposited layer
by ramming and watering, lead up
to 50 m and lift up to 1.5 m.
515.84
33426
64.8
Extra for every additional lift of 1.5
m or part thereof in excavation. (No
extra lift is payable if work is done
by mechanical means)
-
-
-
All kinds of soil
3.28
88
27
Extra for every additional lift of 1.5
m or part thereof in excavation. (No
extra lift is payable if work is done
by mechanical means)
-
-
-
Ordinary rock
2.18
103
47.7
Supplying and filling in plinth withcru-sher stone dust I coarse sand under floors including, watering, ramming consolidating in layers not exceeding 20cm in depth and dressing complete.
75.26
45517
604.8
Supplying and filling in plinth with
hard muram/hard copra having
MDD not Less than 2.0 t/m ³under
floors including watering ramming
compacting ( mimimum comaction
95% of MDD ) in layers not
exceeding 20 cm in thickness and
dressing complete ( Note: -
Miximum thickenss of this layer to
be provided shall be 30 cm )
150.51
40637
270
Supplying and filling in plinth
withsoil ( Other than B.C. Soil
having MDD not Less than 1.85 t/m
³under floors including watering
ramming compacting ( mimimum
comaction 95% of MDD ) in layers
not exceeding 15 cm in thickness
and dressing complete
150.51
33864
225
Earthwork in rough excavation by
any means and banking/filling
eaxcavated earth in layers not
exceeding 20cm in depth, breaking
clods, watering, rolling each layer
with 1/2 tonne roller or wooden or
steel rammers, and rolling every 3rd
and top-most layer with power roller
of minimum 8 tonnes and dressing
up, in embankments for roads, flood
banks, margingal banks, and guide
banks etc., lead upto 50 m and lift
upto 1.5 m:
-
-
-
All Kinds of soil
133
15561
117
Providing and laying in position
cement concrete of specified grade
excluding the cost of centering and
shuttering - All work up to plinth
level :
-
-
-
4.1.2 With 40mm nominal size graded stone aggregate.
-
-
-
4.1.2.2 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate (M I0)
117.88
403998
3427.2
Providing and laying in positioncement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
With Fly ash
-
-
-
4.1.3.2 1:2Y2:4:I1 (1 ordinary portland cement : 2Y2 fly ash : 4 sand : I1
graded stone aggregate 40 mm nominal size)
-
-
-
Extra for providing and mixing waterproofing material as per IS standard in cement concrete work quantity as prescribed by the manufacturer.
-
-
-
Providing and laying in positionspecified grade of reinforced cement concrete (with 20mm
nominal size graded stone aggregate excluding the cost of centering, shuttering, finishing and reinforc-ement - All work up to plinth level :
-
-
-
M 20 -Grade Concrete
214.06
980801
4581.9
Reinforced cement concrete work(with 20mm nominal size graded stone aggregate in walls (any
thickness), including attached pilasters, uttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and up to floor two level excluding cost of centering, shuttering, finishing and reinforcement :
-
-
-
M 20 -Grade Concrete
53.94
252536
4681.8
Reinforced cement concrete work(with 20mm nominal size graded stone aggregate) in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level and up to floor two level excluding the cost of centering, shuttering, finishing and
-
-
-
M 20 -Grade Concrete
366.03
1740692
4755.6
5.9 Centering and shuttering
strutting, propping etc. and removal
of form for:
-
-
-
5.9.1 Foundations, footings, bases of colu-mns, etc. for concrete up to plinth lavel
280.5
43926
156.6
Walls (any thickness) including attached pilasters butteresses, plinth beams and string courses etc.up to plinth level.
877.48
210858
240.3
5.9.3 Suspended Floors , roofs, Landings, balconies and access
1239.54
294514
237.6
Lintels, beams, girders, bressumers
and cantilevers
1480.49
302464
204.3
Columns, Pillars, Piers,
Abutments, Posts and Struts.
713.4
228573
320.4
Stairs, (excluding landings except
spiral- Staircases.
22.38
6687
298.8
Vertical and horizontal fins individually or forming Box louvers band, facias and eaves boards.
18
7792
432.9
Weather shade, Chajjas, corbels
etc., including Edges.
134.5
54593
405.9
Reinforcement for R.C.C. work
including straightening, cutting,
bending, placing in position and
binding up to floor two level
including cost of binding wire, all
wastage and lappage /overlap
(overlaps shall be provided as per
requirement of IS 13920 for ductile
detailing, IS 456 Design & SP 34
Reinforcement detailing) etc
complete ( Note :- Spacer bar
(chairs) shall be paid seperately as
shown in the drawing and as per
direction of engineer in charge
-
-
-
Thermo-Mechanically Treated
bars.(TMT) Fe 500 D conforming to IS 1786
76361.65
3711176
48.6
Add extra for providing
reinforcement above Floor two level
for every additional floor or part
there of.
21644.4
3895
0.18
Providing for plaster drip course/groove in plastered surface or moulding to R.C.C. projections.
433.8
7222
16.65
Extra for R.C.C. work above floor
two level for each floors or part
-
-
-
Brick work with well burnt
chimney bricks in bulls patent
trench kiln, crushing strength not
less than 25kg
/cm2 and water bsorption not more
than 20% in foundation and plinth
i/c curing etc complete.
-
-
-
Cement Mortar 1:6 (1 cement: 6
sand).
1.64
7470
4554.9
Brick work with fly ash lime
bricks (FALG Bricks) conforming
to IS:12894-2002, in super
structure above plinth level up to
floor II level in :
-
-
-
6.7.3 having 50 kg I cmz average compressive
strength
-
-
-
Cement mortar 1:6 (1 cement : 6
sand)
234.83
936971
3990
Extra for brick work in
superstructure above floor two level
for each additional floor or part
thereof respective item.
-
-
-
Half brick masonry with fly ash
lime Gypsum bricks (FALG bricks)
conforming to IS 12894, m
super structure above plinth and
upto floor two level.
-
-
-
6.15.3 having 50 kglcm2 average compressive strength
-
-
-
Cement mortar 1 : 4 (1cement : 4
sand)
135.84
62350
459
Extra for brick work in
superstructure above floor two level
for each additional floor or part
thereof respective item.
-
-
-
6.18 Extra for providing and placing in
position 2 Nos. 8mm dia. M.S. bars
at every third course of half brick
masonry.
135.84
15526
114.3
Providing wood work in frames ofdoors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast
lugs or with dash fasteners of
required dia and length (hold fast
lugs or dash fastener shall be
paid for separately).
-
-
-
9.1.4 Factory made Kiln seasoned chemically treated, finger jointed at spacing not closer than 50 cm, 2nd
class hard wood
-
-
-
Frame of size 100mm x 60mm single or double rebate
567.9
198821
350.1
Providing and fixing panelled orpanelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling/glazing which will be paid for separately, all
complete as per direction of Engineer-in- charge
-
-
-
Factory made Kiln seasoned chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood
-
-
-
35 mm thick shutters
289.86
284091
980.1
Providing and fixing panelling or
panelling and glazing in panelled
or panelled and glazed shutters for
doors, windows and clerestory
windows (Area of opening for panel
inserts excluding portion inside
grooves or rebates to be measured).
Panelling for panelled or panelled
and glazed shutters 25 mm to 40
mm thick :
-
-
-
9.6.9 15 mm thick factory made Kiln seasoned, chemically treated and finger jointed at spacing not closer
than 50 cm , 2nd class hard wood.
116.89
102150
873.9
Providing and fixing M.S. grills of
required pattern in frames of
windows etc. with M.S. flats, square
or round bars etc. including priming
coat with approved steel primer all
complete.
-
-
-
Fixed to openings /wooden frames
with rawl plugs
screws etc.
1988.8
178992
90
Providing 40x5 mm flat iron hold
fast 40 em long including fixing to
frame with 10 mm diameter bolts,
nuts and wooden plugs and
embeddings in cement concrete
block 30xl0x.l5cm 1:3:6 mix (I
cement: 3 sand: 6 graded stone
aggregate 20mm nominal size)
144
12312
85.5
Providing and fixing aluminium
sliding door bolts lSI marked
anodised (anodic coating not less
than grade AC 10 as per IS : 1868)
transparent or dyed to required
colour or shade with nuts and
screws etc. complete :
-
-
-
300X16mm
76
16484
216.9
250x16mm
32
5616
175.5
Providing and fixing aluminium
tower bolts lSI marked anodised
(anodic coating not less than grade
AC 10 as per IS : 1868 ) transparent
or dyed to required colour or shade
with necessary screws etc.
complete
-
-
-
250X10 MM
64
5875
91.8
lOOx lO mm
136
6732
49.5
Providing and fixing aluminium
handles lSI marked anodised
(anodic coating not less than grade
AC 10 as per IS : 1868) transparent
or dyed to required colour or shade
with necessary screws etc.
complete:
-
-
-
125mm
108
7290
67.5
75mm
107
4429
41.4
Providing and fixing aluminium
hanging floor door stopper lSI
marked anodised (anodic coating
not less than grade AC 10 as per IS
: 1868) transpa-rent or dyed to
required colour and shade with
necessary screws etc. complete.
-
-
-
Twin rubber stopper
52
4024
77.4
Providing and fixing factory made
100% solid PVC flush door shutter
made from co-extruded three layer
rigid PVC foam sheet (Single
extruded) with density not less than
600 kg/cum outer layer 1 mm thick
to be rigid UPVC with density not
less than 1400 kg/cum
manufactured by an ISO : 9001-
2000 certified company
-
-
-
24 mm thick plain solid PVC flush
door shutter
26.88
101243
3766.5
Providing and fixing factory made
100% solid wood plastic composite
(wpc) door frames made from wood
plastic composite (single extruded
process) material with density 0.78
kg/cum and manufactured by a ISO
9001-2000 certified company. water
absorption not more than 0.01%
cum..
-
-
-
WPC door frame-single rebate (90
mm x 45 mm )
61.6
44130
716.4
Structural steel work riveted,
bolted or welded in built up
sections, trusses and framed work,
including cutting,hoisting, fixing in
position and applying a priming coat
of approved steel primer all
complete.
-
-
-
Providing and fixing circular/
Hexagonal cast iron or M.S. sheet
box for ceiling fan clamp of internal
dia 140mm, 73mm height, top lid of
1.5mm thick M.S. sheet with its top
surface hacked for proper bonding,
top lid shall be screwed into the
cast iron/ M.S. sheet box by means
of 3.3mm dia.
-
-
-
Steel work welded in built up
sections/ framed work including
cutting, hoisting, fixing in position
and applying a priming coat of
approved steel primer using
structural steel etc. as required.
-
-
-
In gratings, frames, guard bar,
ladder, railings,
brackets, gates and similar works.
260
19913
76.59
Providing and fixing hand rail of
approved size by welding etc.to
steel ladder railing, balcony railing,
staircase railing and similar works,
including applying a priming coat of
approved steel primer.
-
-
-
G.I. pipes.
162.5
18801
115.7
Providing and fixing glass panes/
steel sheet/ Fibre sheet with putty
and glazing clips in steel doors,
windows, clerestory windows all
complete.
-
-
-
With 4.0 mm thick glass panes.
59.66
42550
713.21
Add extra for providing and fixing
froasted glass instead of float glass
-
-
-
With 4.0 mm thick glass panes.
-
-
-
Providing and fixing glass strips in
joints of terrazo/ cement concrete
-
-
-
40m wide and 4 mm thick.
580
17748
30.6
Providing and fixing 18mm thick
gang saw cut mirror polished
(premoulded and prepolished)
machine cut for kitchen platforms,
vanity counters, window sills , facias
and similar locations of required
size of approved shade, colour and
texture laid over 20mm thick base
cement mortar 1:4 (1 cement : 4
sand) with joints treated with white
cement, mixed with matching
pigment, epoxy touch ups,
including rubbing, curing moulding
and polishing to edge to give high
gloss finish wherever required etc.
complete at all levels. samples
approved by Engineer-in-charge.
-
-
-
Cuddpah stone
3.6
4143
1151.1
Kota stone slab flooring over 20 mm
(average) thick base laid over and
jointed with grey cement slurry
mixed with pigment to match the
shade of the slab including rubbing
and polishing complete with base of
cement mortar 1 : 4 (1cement : 4
sand)
-
-
-
25 mm thick.
1231.16
847653
688.5
Kota stone slabs 20 mm thick in
risers of steps, skirting, dado and
pillars laid on 12 mm (average) thick
cement mortar 1:3 (1 cement 3
sand) and jointed with grey cement
slurry mixed with pigment to match
the shade of the slabs, including
rubbing and polishing complete.
123.12
82330
668.7
Extra for pre finished nosing in
treads of steps of Kota stone/ sand
stone slab.
74
2597
35.1
Providing and laying rectified
Glazed Ceramic wall tiles 300x450
mm or more (having thickness 6 to
7 mm) of 1st quality conforming to
IS : 15622 of approved make in all
colours, shades, except White,
Ivory, Grey, Fume Red Brown, laid
on 12 mm thick Cement Mortar 1:3
(1 Cement: 3 sand) including
pointing the joints with white
cement and matching pigments
127.8
82354
644.4
Providing and laying rectified
Glazed Ceramic floor tiles 300x300
mm or more (having thickness 9 to
10mm) of 1st quality conforming to
IS : 15622 of approved make in all
colours, shades, except White,
Ivory, Grey, Fume Red Brown, laid
on 20 mm thick Cement Mortar 1:4
(1 Cement : 4 sand) including
pointing the joints with white
cement and matching pigments
etc., complete.
-
-
-
Providing and laying Antiskid floor
tiles of any sizes, 12 mm thickness
with water absorption's less than
0.08% and conforming to IS: 15622
of approved make in all colours and
shades, laid on 20mm thick cement
mortar 1:4 (I cement :4 sand)
including grouting the joints with
white cement with matching
pigments etc., complete.
14
11088
792
Providing gola 75x75 mm in cement
concrete 1:2:4 (1 cement: 2 sand :
4 stone aggregate 10mm and down
grade) including finishing with
cement mortar 1:3 (1 cement: 3
sand) as per standard design:
-
-
-
In 75x75mm deep chase
385.2
34321
89.1
Making khurras 45x45 em with
average minimum thickness of 5 cm
cement concrete 1:2:4 (1 cement : 2
sand :4 graded stone aggregate of
20 mm nominal size) over P.V.C.
sheet 1mx1mx400micron, finished
with 12mm cement plaster 1:3 (1
cement: 3 sand) and a coat of neat
cement rounding the edge and
making and finishing the outlet
complete.
-
-
-
12mm cement plaster of mix :
-
-
-
1:6 (1 cement: 6 sand)
2291.97
226905
99
15 mm cement plaster on the rough
side of single or half brick wall of
mix
-
-
-
1:6 (1 cement: 6 sand)
834.67
96153
115.2
12 mm cement plaster finished with
a floating coat of neat cement ofmix:
-
-
-
1:4 (I cement: 4 sand)
117.02
15903
135.9
6 mm cement plaster of mix :
-
-
-
1:3 (1 cement: 3 sand)
326.05
28170
86.4
Washed stone grit plaster on
exterior walls of height upto 10 M.
above ground level in two layers,
under layer 12mm cement plaster
1:4 (1 cement : 4 sand ) furrowing
the under layer with scratching tool,
applying cement slurry on the
under layer @ 2 Kg of cement per
square metre, top layer 15mm
cement plaster 1:1/2:2 (1 cement :
1/2 sand : 2 stone chipping 1Omm
nominal size) in panels with groove
all around as per approved pattern
including scrubbing and washing,
the top layer with brushes and
water to expose the stone chippings
,complete as per specification and
direction of Engineer-in- charge
283.92
96589
340.2
Providing and fixing chicken mesh
as per lSI specification and in the
required width with 50mm long
Bombay nails on vertical and
horizontal junctions of RCC and
brick wall including scaffolding and
all lead and lift etc. complete before
plastering upt 10 meter height.
100
5580
55.8
Providing and fixing writing board
green writing with chalk (reguler
modified polyster coated steel
surface). of sizes.
-
-
-
size 1200mmx1800mm
1
6692
6692.4
Applying one coat of water
thinnable cement primer of
approved brand and manufacture
on wall surface :
-
-
-
Water thinnable cement primer.
2454.6
53019
21.6
Distempering with 1st quality acrylic
distemper (ready mixed) of
approved manufacturer, of required
shade and colour complete, as per
manufacturer's specification.
-
-
-
Two or more coats on new work.
2454.6
75110
30.6
Indian tribal art pithora or warli
painting on any wall (interior or
exterior) by using textured exterior
paint/acrylic smooth exterior paint of
approved brand and manufacture
including preparation of surface &
cost of all material, labour and
scaffolding etc complete
3.84
9738
2536.11
Finishing walls with Premium Acrylic
Smooth exterior paint with Silicone
additives of required shade
-
-
-
New work (Two or more coats
applied @ 1.43 ltr/ 10 sqm. over
and including priming coat of
exterior primer applied @ 2.20 kg/
10 sqm).
1065.46
80548
75.6
Painting with synthetic enamel
paint of approved brand and
manufacture to give an even shade
-
-
-
:Two or more coats on new work
1123.8
53605
47.7
Boring/drilling bore well of required
dia perfectly vertical to receive
casing/ strainer pipe, by suitable
method prescribed in IS: 2800 (part
I), including collecting samples from
different strata, preparing and
submitting strata chart/bore log,
including hire and running charges
of all equipments, tools, plants and
machineries required for the job, all
complete as per direction of
Engineer –in-charge, upto 90 metre
depth below ground level.
-
-
-
All types of soil
-
-
-
200 mm dia.
50
20295
405.9
Rocky strata including Boulders.
-
-
-
200 mmdia.
40
24840
621
Boring/drilling bore well of required
dia perfectly vertical to receive
casing/ strainer pipe, by suitable
method prescribed in IS: 2800 (part
I), including collecting samples from
different strata, preparing and
submitting strata chart/bore log,
including hire and running charges
of all equipments, tools, plants and
machineries required for the job, all
complete as per direction of
Engineer –in-charge, upto 90 metre
depth below ground level.
-
-
-
Rocky strata including Boulders.
-
-
-
200 mm dia.
10
5904
590.4
Supplying, assembling, lowering
and fixing in vertical position in bore
well, unplasticized PVC medium
well casing (CM) pipe of required
dia, conforming to IS: 12818,
including required hire and labour
charges, fittings and accessories
etc. all complete, for all depths, as
per direction of Engineer-in-charge.
-
-
-
200 mm nominal dia(minimum wall
thickness 10mm)
60
30186
503.1
Providing and fixing suitable size
threaded mild steel cap or spot
welded plate to the top of bore well
housing/ casing pipe, removable as
per requirement, all complete for
borewell of:
-
-
-
200 mm dia
1
439
439.2
Providing and fixing M.S. clamp of
required dia made of 100 x10 mm
flat to the top of casing/ housing
pipe of tubewell as per IS: 2800
(part I), including necessary bolts
and nuts of required size complete.
-
-
-
200 mm clamp.
1
1152
1152.9
Providing and placing in position
hand pump of India mark II
ofapproved quality for 40 mrn
diameter G.I. pipe complete with all
accessories.
1
756
756.9
Providing and fixing water closet
squatting pan (Indian type W.C.
pan) with 100mm sand cast Iron P
or Strap, uPVC P or Strap, 10 litre
low level white P.V.C. flushing
cistern. including flush pipe, with
manually controlled device (handle
lever) conforming to IS : 7231, with
all fittings and fixtures complete
including cutting and making good
the walls and floors wherever
required :
-
-
-
White Vitreous china Orissa pattern
W.C. pan of size
580x440mm with integral type foot
rests.
4
10782
2695.5
Providing and fixing white vitreous
china pedestal type water closet
(European type W.C. pan) with seat
and lid, 10 litre low level white
P.V.C. flushing cistern, including
flush pipe, with manually controlled
device (handle lever), conforming to
IS : 7231, with all fittings and
fixtures complete including cutting
and making good the walls and
floors wherever required :
-
-
-
W.C. pan with ISI marked white
solid plastic seat and lid
12
32788
2732.4
Providing and fixing white vitreous
china flat back or wall corner type
lipped front urinal basin of
430x260x350mm and
340x410x265mm sizes respectively
with automatic flushing cistern with
standard flush pipe and C.P. brass
spreaders with brass unions and G.I
clamps complete, including painting
of fittings and brackets, cutting and
making good the walls and floors
wherever required :
-
-
-
One urinal basin with 5 litre white
P.V.C. automatic flushing cistern.
2
4957
2478.6
Range of three urinal basins with
lOlitre white P.V.C.
automatic flushing cistern.
2
11361
5680.8
Providing and fixing wash basin with
C.I. brackets, 15 mm C.P. brass
pillar taps,32 mm C.P. brass waste
of standard pattern, including
painting of fittings and brackets,
cutting and making good the walls
wherever require :
-
-
-
White Vitreous China Flat back
wash basin size 450x300 mm with
single 15 mm C.P. brass pillar tap.
10
19683
1968.3
Providing and fixing soil, waste and
vent pipes :
-
-
-
100 mm dia. Pipe minimum wall
thickness 5mm
-
-
-
Centrifugally cast (spun) rron
socket and spigot (SandS) pipe as
per IS: 3989.
150
128925
859.5
Providing and fixing M.S. holder-bat
clamps of approved design to Sand
Cast iron/cast iron (spun) pipe
embedded in and including cement
concrete blocks 10x10x10cm of
Cement Concrete 1:2:4 mix (1
cement : 2 sand : 4 graded stone
aggregate 20mm nominal size)
including cost of cutting holes and
making good the walls etc. :
-
-
-
For 100 mm dia. Pipe
30
1782
59.4
Providing and fixing bend of
required degree with access door,
insertion rubber washer 3 mm thick,
bolts and nuts complete.
-
-
-
100 mm dia minimum wall thickness
6.5mm
-
-
-
Sand cast iron SandS as per IS -
3989
8
2937
367.2
Providing and fixing plain bend of
required degree.
-
-
-
100 mm dia minimum wall thickness
6.5mm
-
-
-
Sand cast iron SandS as per IS :
3989
18
5605
311.4
Providing and ftxing heel rest
sanitary bend
-
-
-
100 mm dia minimum wall thickness
6.5mm
-
-
-
Sand cast iron SandS as per IS -
3989
8
2786
348.3
Providing and fiXing single equal
plain junction of required degree :
-
-
-
100x100xl00 mm minimum wall
thickness 6.5mm
-
-
-
Sand cast iron SandS as per IS -
3989
8
4370
546.3
Providing and fixing door piece,
insertion rubber washer 3mm thick,
bolts and nuts complete :
-
-
-
100 mm
-
-
-
Sand cast iron SandS as per IS -
3989
8
3938
492.3
Providing and fiXing terminal guard:
-
-
-
100 mm
-
-
-
Sand cast iron SandS as per IS -
3989
8
3456
432
Providing and fiXing collar:
-
-
-
100mm
-
-
-
Sand cast iron SandS as per IS -
3989
5
1426
285.3
Providing lead caulked joints to
sand cast iron/ centrifugally cast
(spun) iron pipes and fittings of
diameter:
-
-
-
100mm
68
14320
210.6
Providing and fixing trap of self
cleansing design with screwed
down or hinged grating with or
without vent arm complete,
including cost of cutting and making
good the walls and floors :
-
-
-
100 mm inlet and 100 mm outlet
-
-
-
Sand cast iron SandS as per IS:3989
10
7425
742.5
Providing and fixing P.V.C. waste
pipe for sink or wash basin
including P.V.C. waste fittings
complete.
-
-
-
Flexible pipe
-
-
-
32 mm
18
1409
78.3
Providing and fixing mirror of
superior glass (of approved quality)
and of required shape and size
with plastic moulded frame of
approved make and shape with 6
mm thick hard board backing :
-
-
-
Rectangularshape453x357mm
10
5778
577.8
Providing and fixing toilet paper
holder :
-
-
-
C.P. brass
12
3672
306
Providing and fixing CP brass
towel rail of approved quality and
make
-
-
-
450x20mm
4
3009
752.4
Providing and fixing CP brass soap
dish of approved quality and make
4
1519
379.8
Painting sand cast iron/
centrifugally cast (spun) iron soil,
waste vent pipes and fittings with
two coats of synthetic enamel paint
of any colour such as chocolate
grey, or buff etc. over a coat of
primer (of approved quality) for new
work
-
-
-
100 mm diameter pipe
90
2349
26.1
Providing and fixing Chlorinated
Polyvinyl Chloride (CPVC)
pipes, having thermal stability for
hot and cold water supply including
all CPVC plain and brass threaded
fittings i/c fixing the pipe with
clamps at 1.00 m spacing. This
includes jointing of pipes and
fittings with one step CPVC solvent
cement and the cost of cutting
chases and making good the same
including testing of joints complete
as per direction of Engineer in
Charge.
Concealed work including cutting
chases and making good the
walls etc.
-
-
-
15 mm nominal outer dia .Pipes.
35
6520
186.3
20 mm nominal outer dia .Pipes.
200
42120
210.6
Providing and fixing Chlorinated
Polyvinyl Chloride (CPVC)
pipes, having thermal stability for
hot and cold water supply including
all CPVC plain and brass threaded
fittings. This included jointing of
pipes and fittings with one step
CPVC solvent cement, trenching,
refilling and testing of joints
complete as per direction of
Engineer in Charge.
External work
-
-
-
25 mm nominal outer dia .Pipes.
50
8325
166.5
Providing and fixing G.I. pipes
complete with G.I. fittings including
trenching and refilling etc.External
work :
-
-
-
32 mm dia nominal bore
10
2790
279
40 mm dia nominal bore
10
3618
361.8
50 mm nominal outer dia .Pipes.
10
4428
442.8
80 mm nominal outer dia .Pipes.
10
5598
559.8
Providing and fixing gun metal gate
valve with brass Jever handle
of approved quality.
-
-
-
32 mm nominal bore.
4
1508
377.1
40 mm nominal bore.
4
1767
441.9
Providing and fixing CPVC gate
valve with knob of approved
quality.
-
-
-
25 mm nominal bore
4
1540
385.2
Providing and fixing gun metal nonreturn
valve of approved
quality (screwed end):
-
-
-
25 mm nominal bore..
-
-
-
Verticle
2
853
426.6
Providing and placing on terrace (at
all floor levels) polyethylene water
storage tank ISI : 12701 marked
with cover and suitable locking
arrangement and making necessary
holes for inlet, outlet and overflow
pipes but without fittings and the
base support for tank
2000
12600
6.3
Providing and fixing C.P. brass
angle valve for basin mixer and
geyser points of approved quality
conforming to IS:8931
10
4644
464.4
Providing and fixing C.P. brass
shower rose with 15 or 20 mm inlet:
-
-
-
150 mm diameter
2
279
139.5
Providing and fixing PTMT bib
cock of approved quality and
colour.
-
-
-
15mm nominal bore, 90mm long.
Weighing not less
than 93 gms.
4
853
213.3
Providing and fixing PTMT stop
cock of approved quality and
colour.
-
-
-
Concealed stop cock, 15mm
nominal bore, 108mm long.
Weighing not less than 108 gms.
4
871
217.8
Providing and fixing PTMT pillar
cock of approved quality and
colour.
-
-
-
15mm nominal bore, 125mm
long foam flow. Weighing not
less than 120 gms.
4
1195
298.8
Providing and fixing PTMT
grating of approved quality and
colour.
-
-
-
Circular type.
-
-
-
100 mm nominal dia.
8
396
49.5
125 mm nominal dia with 25 mm
waste hole.
10
540
54
Providing and fixing PTMT Ball cock
of approved quality, colour
and make complete with Epoxy
coated aluminium rod with L.P./
H.P.H.D. plastic ball.
-
-
-
25 mm nominal bore, 152mm long.
Weighing not less
than 440 gms.
-
-
-
verticle
2
1107
553.5
Providing and fixing Unplasticised
P.V.C. connection pipe with PTMT
Nuts collar and bush of approved
quality and colour.
-
-
-
15 mm nominal bore with 45 em
length.
-
-
-
Cutting holes upto 15x15 em in
R.C.C. floors and roofs for passing
drain pipe etc. and repairing the
hole after insertion of drain pipe
etc. with cement concrete 1:2:4
(1cement: 2 sand: 4 graded stone
aggregate 20 mm nominal size)
including finishing complete so as
to make it leak proof.
20
2322
116.1
Providing and fixing CP jet
assembly to including connection
etc complete.
12
4050
337.5
Providing and laying below ground
unplasticised PVC pipe to with
stand working pressure of 4 kg/cm2
soild waste pipes confirming to
IS:13592 and IS:4985 including
jointing with seal ring confirming to
IS :5282 leaving 10mm gap for
thermal expansion all necessary
fittings etc. complete. Excavation to
be paid seperataly.
-
-
-
160 mm diameter OD
50
21465
429.3
Providing and laying cement
concrete 1:3:6 (1 cement : 3 sand :
6 graded stone aggregate 20 mm
nominal size) all-round PVC. pipes
including bed concrete as per
standard design:
-
-
-
160 mm diameter PVC. Pipe
50
31680
633.6
Providing and fixing square-mouth
S.W. gully trap class SP1 complete
with C.I. grating brick masonry
chamber with water tight C.I. cover
with frame of 300 x300 mm size
(inside) the weight of cover to be
not less than 4.50 kg and frame to
be not less than 2.70 kg as per
standard design :
-
-
-
150 x 100 mm size P type.
-
-
-
With well burnt bricks
4
6490
1622.7
Providing and laying non-pressure
NP2 class (light duty) R.C.C. pipes
with collars jointed with stiff mixture
of cement mortar in the proportion
of 1:2 (1 cement : 2 sand) including
testing of joints etc. complete:
-
-
-
150 mm dia. R.C.C. pipe
10
2565
256.5
Constructing brick masonry
manhole in cement mortar 1:4 ( 1
cement : 4 sand ) R.C.C. top slab
with Cement Concrete 1:2:4 mix (1
cement : 2 sand : 4 graded stone
aggregate 20 mm nominal size),
foundation concrete 1:4:8 mix (1
cement : 4 sand : 8 graded stone
aggregate 40mm nominal size)
inside plastering 12mm thick with
cement mortar 1:3 (1 cement : 3
sand) finished with floating coat of
neat cement and making channels
in cement concrete 1:2:4 (1 cement
: 2 sand : 4 graded stone aggregate
20mm nominal size) finished with a
floating coat of neat cement
complete as per standard design
-
-
-
Inside size 90x80 cm and 45 cm
deep including C.I. cover with frame
(light duty) 455x610 mm internal
dimensions total weight of cover
and frame to be not less than 38 kg
(weight of cover 23 kg and weight of
frame 15 kg) :
-
-
-
With Sewer bricks conforming to IS
: 4885
-
-
-
Extra for depth for manholes
-
-
-
Size 90x80 cm
-
-
-
With Sewer bricks conforming to IS
: 4885
0.5
2451
4903.2
Constructing brick masonry road
gully chamber 50x45x60 cm with
bricks in cement mortar 1:4 (1
cement : 4 sand) including 500x450
mm precast R.C.C. horizontal
grating with frame complete as per
standard design :
-
-
-
With well burnt bricks
4
14187
3546.9
Constructing soak pit
1.20x1.20x1.20m filled with
brickbats including S.W. drain pipe
100 mm diameter and 1.20m long
complete as per standard design.
1
2854
2854.8
Providing and laying water
proofing treatment to vertical and
horizontal surfaces of depressed
portions ofW.C., kitchen and the
like consisting of : 4 1st course of
applying cement slurry @ 4.4
Kg/sqm mixed with water proofing
compound conforming to IS 2645 in
recommended proportions including
rounding off junction of vertical and
horizontal surface. 5 llnd course
of20mm cement plaster 1:3 (1
cement: 3 sand) mixed
with water proofing compound in
recommended roportion including
rounding off junction of vertical and
horizontal surface. 6 Illrd course of
applying blown or residual bitumen
-
-
-
SUB TOTAL SOR ITEMS CIVIL WORKS
-
13204452
-
Point wiring (excluding metallic switch box & sheet but including switches, sockes, lamp, holders, ceiling roses etc) with 1.5 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI Marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit etc. as required as per specification for :-
-
-
-
Light Point/Fan Points.
-
-
-
Twin Control light points
-
-
-
Wiring for circuit wiring with PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) of ISI marked suitable size etc. as required as per specification
-
-
-
Point wiring (excluding metallic switch box & sheet ) for 3 Pin 16 Amp. Socket Outlet Point With 4 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in Concealed rigid P.V.C Conduit (HMS) ISI Marked of suitable size etc. with 16 Amp. F.T. Switch & Socket / S.S.Combined 6/16 Amp. of ISI Marked and 4 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit as per specification for
-
-
-
On Separate Board
-
-
-
Supplying and fixing PVC conduit ISI marked along with the accessories in concealed system etc. as required
-
-
-
Supplying and fixing of approved make modular type metal box withmodular frame base plate and cover plate including fixing in concealed surface excluding switch socket etc as required for
-
-
-
Supplying and drawing single core PVC insulated cable FR with copper multi strand conductor ISI marked in existing rigid PVC Casing-N-Capping / conduit in surface or concealed as per specification.
-
-
-
1 X 1.5 sq mm
-
-
-
1 X 2.5 sq mm
-
-
-
Wiring for sub-mains with PVC insulated cable FR with copper multi strand conductor ISI marked in recessed / concealed rigid steel ISI marked conduit of suitable size(Conduit included) including accessories long neck threaded type, connection painting etc ,as required as per specification
-
-
-
4 WIRE SUB MAIN
-
-
-
Supplying & fixing of ISI marked Porcelain Rewireable type fuse carrier & base unit of approved make & confirming to IS: 2086-1993
-
-
-
Supplying of ISI Marked and approved make of Moulded Case Circuit Breaker (MCCB) suitable for 3 phase,3 pole, 50 Hz, 415 Volts, AC supply with respective interrupting capacity (KA) at 415 Volts cited against their range standard conforming to IS – 8828
-
-
-
MCCB with Breaking Capacity 25 KA at 415 V
-
-
-
Supplying of ISI Marked and accepted standard of Miniature Circuit Breaker (MCB) of 'C' series suitable for 240/415 Volts, 50 Cycle , 10 kA Value AC supply confirming to IS : 8828 : 1996, IEC : 60898 :2002 but without enclosures :-
-
-
-
SINGLE POLE (SP)
-
-
-
FOR TRIPLE POLE (TP)
-
-
-
Supplying of MCB Isolators suitable for 240/415 Volts, 50 Hz AC supply with KA value rating 10 kA of approved make confirming to IS :13947-Part III : 1993 & IEC :60947- 3:2001 (without enclosures ) :-
-
-
-
FOUR POLE
-
-
-
Supplying of approved make TPN MCB DB Metal Double Door IP 43 protection with provision for FP MCB/Isolator/RCCB/RCBO as incomer and SP MCBs as outgoing inclusive of Bus bar, Neutral bar, Earth bar & two earth terminals etc. complete as per IS:13032( exclusive of MCB & isolator ):
-
-
-
Supplying of approved make, powder coated Metal Double Door Vertical TPN MCB DB IP 43 protection with provision for MCCB up to 160A TP/ FP 36kA as incomer and space for SP/TP MCBs as outgoing (without MCCB / MCBs) inclusive of bus bar & connections etc
-
-
-
Fixing of MCB /MCCB/ Isolator in sheet steel enclosure as required as per accepted practice, including mounting on busbar and cable connection etc. complete (Labour only )
-
-
-
Labour charges for fixing sheet steel enclosures, MCB DB flush mounting type, as per accepted practice, duly embedded and end plate completely flushed in wall, cable connection etc.complete :-
-
-
-
FOR S.No :-
-
-
-
Supplying, Fixing and Testing of Compact Fluorescent Lamp (CFL) with inbuilt electronic ballast ISI marked BC / ES cap of approved make as required as per specification
-
-
-
Suppling,Fixing and Testing of Compact ,Fluorescent Lamp Non-Retrofit ISI marked of approved make as required as per specification
-
-
-
Supplying and fixing of approved make step type Modular electronic Fan regulator including connection etc. as required on existing board
-
-
-
Supplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts including connections with all necessary material complete of approved as required confirming to IS :374/1979 with up to date ammendments.
-
-
-
Supplying, erecting and testing of approved make Exhaust Fan heavy duty with mounting frame, blades AC 230-250 complete connection and including, frame bolt/ Anchor hole fastners etc. complete finished of approved as required.
-
-
-
Supplying, fixing & testing of approved make T- 5 lamp channel luminary with epoxy white powder coated CRCA sheet steel housing box type channel with reflector cover including electronic ballast (HF), PF 0.95, THD 30% complete duly wired (with tube rod) as per specification & fixing as below:
-
-
-
Supplying, fixing & testing of approved make of low watt CFL roadway / street light luminary with epoxy powder coated sheet aluminium / steel housing with epoxy white powder coated CRCA sheet steel gear tray, electronic ballast (HF), PF 0.95, THD 30%, clear acrylic cover with necessary materials connection including mounting with GI pipe Light 'A' class 25/32mm OD, clamps on existing wall / pole etc. complete as required (without lamp)
-
-
-
Suppling and fixing street light with high power LED of 1 to 3 W each assembled on single MCPCB system lumen output with efficacy 90 lm/W luminaire having color temp 4000K to 6500K and 50000 burning hrs life minimum @L70 .The color rendering index of LED light should be more than 70 Luminair comprises of driver,PF 0.95 and surge protection 3KV .Housing made of pressure die cast aluminium with the heat resistant glass /lens type IP65 protection.Submission LM 80-08From LED source manufacturing &LM79-08/IS 16106 from NABL aprroved lab manufacturer mandatory i/c 50 mm dia GI pipebracket upto 2 mtr long required angle /shape connection lead, testing etc to complete the job 2 yrs guarantee certificate from manufacturer
-
-
-
Providing and fixing wooden board of suitable size (maximum 12" X 18" ) for fixing of house service Metre with necessary materials and connection testing etc. complete as per specification :
-
-
-
Supplying and drawing PVC insulated copper cable ( Earth Continuity Conductor ) of Green colour FR with copper multi strand conductor ISI marked in existing conduit along with other wires as required as per specification :
-
-
-
Supplying & Installation of required capacity of single phase, 50 Hz,220V, deep well submersible pump Stainless Steel body, as per IS of approved Make, suitable for 4"/6 " tube well with Control Panel Starter suitable for Submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications but excluding Pipe, SS/Nylon wire rope and connection cable.
-
-
-
Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make.
-
-
-
Supplying and laying of approved Make HDPE pipe as per IS : 4984 and IS : 14333 with latest amendment for installation of submersible pump with necessary connection, socket/couplings, Tees,etc. as required
-
-
-
Supply of XLPE Insulated power cable (confirming IS-7098 Part-I ) 1100 Volt grade, 1 core /2 core /3½ core/4 core ISI MARKED with Alu. Stranded /solid conductor
-
-
-
UNARMOURED 1 Core
-
-
-
4 CORE ARMOURED
-
-
-
Supplying and fixing cramping type Alum. lugs as per I.S.S. Specification suitable for following size of cable with Alu. /Copper solid/stranded conductor evently cramped with high/pressure tool and connected to switch gear/Bus/M.C.C.B./ M.C.B. etc. as required complete.
-
-
-
For Conductor Size-
-
-
-
Laying of underground cable armoured./ unarmoured as per specification in air suspended on existing approved type of iron clamps, G.I wire 7/1.6mm & shackle insulator / insulated strip complete.
-
-
-
Supply of support for overhead line RS joist /'H' Beam of I.S. standard including drilling of required hole etc. complete as required.
-
-
-
Supplying and drawing All Aluminum Alloy conductor (AAAC) of approved make confirming to IS 398-1979 Pt. IV, including binding at existing insulator, jointing, jumpering, tearing off, connecting etc. as required including clearing of obstacles (if any)
-
-
-
Supplying installing, testing & commissioning of outdoor H.T., AB switch assembly set gang operated with brass contact parts, including required GI pipe operating rod, handle & locking arrangement on On-Off position conforming to IS complete with required material and installing on existing DP structure to complete the job as required as per specification.(Set of 3 nos.)
-
-
-
Supplying installing, testing & commissioning D.O. fuse assembly with brass part contact for 33 or 11/0.4 KV DP Structure set of 3 Nos. with fuse barrel i/c required fuse element & other materials as per specification on existing D.P. structure as required.[1]
-
-
-
Supplying, installing, testing and commissioning of 11/0.4 K.V. 3 Phase 50 Cycle oil immersed, naturally cooled, out door type transformer connected delta on H.T. side and star on L.T. side, hand operated off load Tap changer switch above 100 kVA, oil conservator with drain valve, plug 63 KVA and above, dehydrating silica gel breather on eye level, rating and diagram plate, two earthing terminal, lifting lugs, oil level gauge, drain valve with plug, temperature not exceeding 50ºC on load, oil filling hole with plug, four unidirectional roller, arcing horns, explosion vent, terminal arrangement bushing on H.V. side and cable box on LV side, first filling of oil upto desired level and transformer installing on existing structure with all required materials arrangement as required as per IS specification. Marked ISI & 3 Star rating
-
-
-
Aluminium wound
-
-
-
ELECTRIFICATION =
-
1459778
-
GRAND TOTAL =
-
14664231
-
SUB TOTAL NON SOR AND SOR ITEMS ELECTRCAL WORKS
-
14664231
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements