Public Works Department Tender

Providing supplying and placing of Visitor chair made up of High density Polyurethane foam of 40 density with Prime quality Leatherette, chair seat and back stitched in design, MS chrome plated frame fixed with PU cushioned armrest covered with leatherette for soft touch. Seat Plywood Made Of 15mm Hot Pressed Supported . Upholstery PVC Structure Moulded With Prime Quality Leatherette . Understructure Base fixed with MS chrome plated Base. Seat & Back Are Firmly Connected To The Base Frame . Base Seat 120mm Thick Moulded With PU Foam. Arm Rest Fitted To The Seat With Armrest Connecting Brackets. Overall dimensions of Chair shall be, Width of Chair - 680-720mm, Depth of Chair - 680-720mm as measured from pedestal below. Height from ground - min 1050 mm to max 1120 mm. Seat height - min 455mm to max 530mm.All work shall be carried out as per detail drawing and instruction of Architect /Engineer In charge. Dimensions tolerance / variations shall be within +/- 100 mm. Company should be ISO-9001, 14001, 18001, 45001, 50001, Green Pro, Griha/Green Co. Certified, must have BIFMA and AIOTA membership. Approved Makes- BONTON/GODREJ/METHODEX. Approved design as per Engineer Incharge.

Providing Supplying and Placing of High Back Chair. Seat Plywood Made Of 12mm Hot Pressed Back Mesh With PP Structure. Upholstery PVC Structure Moulded With Prime Quality High Stretch Fabric/Leatherite. PHA ( Gas-Lift ) 85mm (TDC 152mm & BDC 67). Seat & Back Are Firmly Connected To The Base Frame Machanism. Machanism Provided Upright Position Locking Fixed Back & Back Tilts. Tilt Adjustment Can Be Operated In Seating Position. Chair Max Height 1330 & 670D. 470W x 450D Base Seat 70mm Thick Moulded With PU Foam D - 45kg/m3 & 550W x 800H Back Seat PP Structure Moulded Fabric Mesh. Headrest Support Adjustable Type PU Foam With PP Cover At Back. 430/570 Arm Rest Fixed Type PU. Arm Rest Height From Seat 210mm. Height From Seat To Ground 490mm. Understructure Used Chrome Plated Steel Base With PP Hub. Casters Made Of Moulded Black Nylon Metal Bolt Inserted & Fitted With 5 Nos. Twin Wheel Casters 50mm Dia. Pedestral Pitch Centre Dia 650mm With Casters.All work shall be carried out as per detail drawing and instruction of Architect /Engineer In charge. Dimensions tolerance / variations shall be within +/- 100 mm. Company should be ISO-9001, 14001, 18001, 45001, 50001, Green Pro, Griha/Green Co. Certified, must have BIFMA and AIOTA membership. Approved Makes- BONTON/GODREJ/METHODEX. Approved design as per Engineer Incharge.

Providing Supplying and Placing of Two Seater Sofa. The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose.LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. Width (W): 1600 MM. Depth (D): 850 MM. Height (H): 830 MM. Seat Height (SH): 450 MM. All work shall be carried out as per detail drawing and instruction of Architect /Engineer In charge.Dimensions tolerance / variations shall be within +/- 100 mm. Company should be ISO-9001, 14001, 18001, 45001, 50001, Green Pro, Griha/Green Co. Certified, must have BIFMA and AIOTA membership. Approved Makes- BONTON/GODREJ/METHODEX. Approved design as per Engineer Incharge.

Supplying and fixing of wooden side table of size (450 mm length x 450 mm width x 400 mm high) made with best quality seasoned teak / sheesham wood having 8mm Glass top, as per detail drawing & design. All wooden & veneer surfaces shall be dully melamine polished. All work shall be carried out as per detail drawing and instruction of Architect /Engineer In charge. Company should be ISO-9001, 14001, 18001, 45001, 50001, Green Pro, Griha/Green Co. Certified, must have BIFMA and AIOTA membership. Approved Makes- BONTON/GODREJ/METHODEX. Approved design as per Engineer Incharge.