Northern Coalfields Limited Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Northern Coalfields Limited - NCL Tender
Eprocure
Opening Date26 Mar 2021
Closing Date13 Apr 2021
Tender Amount₹ 47,66,779
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Annual Maintenance Of Residential Building And Shifting Of Quarters For A Period Of One Year At Block-b Project
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_NCL_203212_1Bid Award Id
ViewTender No
NCL/Block-B/SO(C)/20-21/ETN/45 dtd 26.03.2021Tender Authority
Northern Coalfields Limited ViewPurchaser Address
-Website
http://http://nclcil.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
All kinds of soil
80
-
125.95
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
... More
All kinds of soil.
130
-
166.4
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
80
-
125.75
... More
Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.
-
-
-
... More
All kinds of soil
240
-
13.95
... More
Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
1500
-
3.65
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size).
50
-
4349.2
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
60
-
410.65
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).
3
-
5272.95
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
1.5
-
6203.45
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
6
-
6448.45
... More
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
5
-
179.3
... More
Suspended floors, roofs, landings, balconies and access platform
20
-
410.3
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
10
-
329.65
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
10
-
447.2
... More
Weather shade, Chajjas, corbels etc., including edges
5
-
466.8
... More
Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
10
-
6003.85
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
TMT bars
2050
-
47.8
... More
Brick work with non-modular FALG bricks confirming to IS: 12894, class designation 7.5 average compressive strength etc. complete in all respect foundation and plinth
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
40
-
3585.57
... More
Brick work with non-modular FALG bricks confirming to IS: 12894, class designation 7.5 average compressive strength etc. complete in superstructure above plinth level up to floor V level
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
10
-
4354.54
... More
Half-brick work with non-modular FALG bricks confirming to IS: 12894, class designation 7.5 average compressive strength etc complete in all respect in foundation and plinth
-
-
-
... More
cement mortar 1:4 (1 cement : 4 coarse sand)
20
-
448.53
... More
Half-brick work with non-modular FALG bricks confirming to IS: 12894, class designation 7.5 average compressive strength etc complete in all respect in superstructure above plinth level up to floor V level
-
-
-
... More
Cement mortar 1:4 (1 cement :4 coarse sand)
100
-
512.37
... More
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.
-
-
-
... More
Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms
50
-
72.7
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
15 mm nominal outer dia Pipes
150
-
232.4
... More
20 mm nominal outer dia Pipes
160
-
264.75
... More
25 mm nominal outer dia Pipes
120
-
305.65
... More
Providing and laying matt finished vitrified tile of size 300x300x9.8mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
100
-
651.45
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
-
-
-
... More
Red Marandi wood
0.5
-
45111.1
... More
Deduct for not providing hinges in doors, windows or clerestory window shutters with :
-
-
-
... More
Stainless steel butt hinges with stainless steel screws :
For 2nd class teak wood and other class of wood shutters
100
-
-125.95
... More
Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately):
-
-
-
... More
12 mm thick
5
-
476.9
... More
Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).
-
-
-
... More
18 mm thick
10
-
857.3
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
-
-
-
... More
30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
300
-
1351
... More
25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws
40
-
1302.5
... More
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :
-
-
-
... More
30 mm thick shutters
With ISI marked M.S. pressed butt hinges bright finished of required size
Kiln seasoned and chemically treated Red Marandi wood
40
-
1702.8
... More
Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms
50
-
86.6
... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
790
-
10.8
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.
-
-
-
... More
Size of Tile 600x600 mm
100
-
923.15
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
300
-
79.4
... More
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :
-
-
-
... More
20 mm dia (heavy type)
40
-
101.1
... More
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :
-
-
-
... More
100x58x1.90 mm
40
-
24.85
... More
Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete.
-
-
-
... More
Overall width 35 mm
60
-
-168.15
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :
-
-
-
... More
250x16 mm
200
-
121.4
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :
-
-
-
... More
200x10 mm
350
-
43.7
... More
150x10 mm
100
-
37.9
... More
100x10 mm
160
-
27.1
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :
-
-
-
... More
125 mm
450
-
24.6
... More
100 mm
150
-
19.55
... More
Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete :
-
-
-
... More
150 mm
20
-
20.05
... More
Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete.
2
-
395.55
... More
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
2
-
355.95
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
-
-
-
... More
250x16 mm
20
-
163.35
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
125 mm
20
-
43.45
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
-
-
-
... More
Twin rubber stopper
30
-
32.25
... More
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:
-
-
-
... More
One or more coats on old work
600
-
51.25
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
1500
-
59.4
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
-
-
-
... More
Using flats 30x6mm for diagonal braces and central cross piece
70
-
2542
... More
Welding by gas or electric plant including transportation of plant at site etc. complete.
3000
-
2.85
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
-
-
-
... More
25 mm thick with 12.5 mm nominal size stone aggregate
4000
-
246.34
... More
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.
-
-
-
... More
With 2nd class teak wood beading 62X19 mm
75
-
1076.45
... More
Providing and fixing PTMT pillar cock of approved quality and colour
-
-
-
... More
15 mm nominal bore, 107 mm long, weighing not less than 110 gms
50
-
144.65
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
80
-
662.9
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
100
-
601.5
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
80
-
469.2
... More
Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete :
-
-
-
... More
With residual type petroleum bitumen of grade VG -10
200
-
90.15
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
... More
75 mm diameter
350
-
135
... More
110 mm diameter
300
-
210.6
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
Single tee without door
110x110x110 mm
10
-
144.9
... More
Bend 87.5°
75 mm bend
120
-
68.1
... More
110 mm bend
100
-
99.2
... More
Shoe (Plain)
75 mm Shoe
20
-
59.35
... More
110mm shoe
20
-
86.55
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
... More
75 mm
350
-
174.05
... More
110 mm
300
-
173.1
... More
12 mm cement plaster of mix :
-
-
-
... More
1:6 (1 cement: 6 fine sand)
3500
-
152.05
... More
6 mm cement plaster of mix :
-
-
-
... More
1:3 (1 cement : 3 fine sand)
150
-
135.75
... More
Neat cement punning.
500
-
38
... More
Lettering with black Japan paint of approved brand and manufacture
75735
-
2.7
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
140
-
79.4
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
-
-
-
... More
Water thinnable cement primer
400
-
35.9
... More
Applying priming coat:
-
-
-
... More
With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
1000
-
33.2
... More
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
150
-
28.15
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
... More
Two or more coats on new work
1300
-
73
... More
Providing and fixing PTMT bib cock of approved quality and colour.
-
-
-
... More
15mm nominal bore, 86 mm long, weighing not less than 88 gms
500
-
89.2
... More
Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.
-
-
-
... More
Door chowkhats
50
-
829.6
... More
Window chowkhats
50
-
514.5
... More
Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.
70
-
55.45
... More
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
-
-
-
... More
Float glass panes of thickness 4 mm
20
-
546.25
... More
Renewal of old putty of glass panes (length)
200
-
25
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :
-
-
-
... More
Old work (one or more coats)
8000
-
32.15
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
-
-
-
... More
One or more coats on old work
2000
-
48.05
... More
Finishing walls with Acrylic Smooth exterior paint with required shade
-
-
-
... More
Old work (one or more coats applied @ 0.9 ltr/10 sqm).
1500
-
41.2
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
-
-
-
... More
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
50
-
997.05
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
... More
In cement mortar
35
-
842.75
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
-
-
-
... More
Of area 3 sq. metres and below
150
-
157.85
... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :
-
-
-
... More
Of area 3 sq. metres and below
200
-
61.25
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
50
-
34.15
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
2150
-
22.4
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
-
-
-
... More
100 mm diameter
50
-
196.25
... More
Providing and fixing white vitreous china water closet squatting pan (Indian type) :
-
-
-
... More
Orissa pattern W.C. pan of size 580x440 mm
60
-
1243.15
... More
Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.
20
-
1172.15
... More
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
-
-
-
... More
10 litre capacity - White
75
-
667.35
... More
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :
-
-
-
... More
Black solid plastic seat with lid
25
-
302.15
... More
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :
-
-
-
... More
Flat back wash basin of size 550x400 mm
25
-
615.55
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Flexible pipe
-
-
-
... More
32 mm dia
120
-
68
... More
40 mm dia
50
-
69.95
... More
Providing and fixing 100 mm sand cast Iron grating for gully trap.
25
-
24.35
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
50
-
712.6
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
30
-
497.1
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
-
-
-
... More
100 mm inlet and 100 mm outlet
Sand Cast Iron S&S as per IS: 1729
40
-
794.3
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
-
-
-
... More
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
30
-
383.7
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK
-
-
-
... More
25 mm nominal outer dia Pipes
50
-
172.6
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. INTERNAL WORK - EXPOSED ON WALL
-
-
-
... More
15 mm dia nominal bore
400
-
168.9
... More
20 mm dia nominal bore
400
-
201.65
... More
25 mm dia nominal bore
150
-
222.85
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
... More
25 to 40 mm nominal bore
10
-
384.7
... More
Providing and fixing brass bib cock of approved quality :
-
-
-
... More
15 mm nominal bore
50
-
202.65
... More
Providing and fixing brass stop cock of approved quality :
-
-
-
... More
15 mm nominal bore
60
-
202.65
... More
20 mm nominal bore
100
-
218.85
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
... More
25 mm nominal bore
10
-
332.45
... More
20mm Nominal bore
20
-
307.65
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
... More
15 mm nominal bore
20
-
229.8
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :
30 cm length
-
-
-
... More
15 mm nominal bore
200
-
53.5
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Circular tank
17000
-
6.25
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
-
-
-
... More
15 mm nominal bore
10
-
315.3
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
-
-
-
... More
15 mm nominal bore
5
-
461.35
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.
Kiln seasoned and chemically treated Red Marandi wood
-
-
-
... More
30 mm thick shutters
100
-
1420
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :
-
-
-
... More
Kiln seasoned and chemically treated Red Marandi wood
70
-
1225.85
... More
Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
... More
Kitchen sink without drain board
610x510 mm bowl depth 200 mm
30
-
2048.45
... More
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.
-
-
-
... More
30 mm thick plain PVC door shutters
100
-
2160.9
... More
Supply of GI Elbow 15 mm
180
-
14.46
... More
Supply of GI Elbow 20 mm
150
-
19.28
... More
Supply of GI Elbow 25 mm
50
-
30.85
... More
Supply of GI Socket 15 mm
150
-
13.5
... More
Supply of GI Socket 20 mm
90
-
16.39
... More
Supply of GI Socket 25 mm
60
-
22.17
... More
Supply of GI Tee 15 mm
160
-
19.28
... More
Supply of GI Tee 20 mm
120
-
33.74
... More
Supply of GI Tee 25 mm
60
-
38.56
... More
Supply of GI Plug 25 mm
40
-
9.64
... More
Supply of PVC water tank cover
50
-
124.36
... More
Supply of GI Nipple 15 mm
180
-
9.64
... More
Supply of GI Nipple 20 mm
120
-
13.5
... More
Supply of GI Nipple 25 mm
25
-
19.28
... More
Supply of CP waste jally 40 mm
25
-
119.54
... More
Supply of GI union 15 mm
60
-
28.92
... More
Supply of GI union 20 mm
80
-
48.21
... More
Supply of GI union 25 mm
30
-
77.12
... More
Labour rate for small petty water supply repair work such as fixing of washer in bib cock, stop cock, adjusting of foot valve of cistern, fixing of water supply fitting such as GI Nipple, socket, tee, plug, union, elbow etc as and when required as per instruction of EIC
1200
-
47.04
... More
Petty mason repair works small repair work such as patches on wall holes, repair of beat near door etc. as and when required as per EIC
100
-
98.73
... More
Petty mason repair works large repair work such as doors, windows frame after repairing, exhaust fan, hole carry anf fixing and other similar works etc. as & when required as per EIC
100
-
197.46
... More
P&F aluminium sheet 24 gauge door shutters with nails etc as & who required as per instructions of EIC
60
-
70.23
... More
Petty carpentary repair works such as repairing of cupboard, nails screw fixing hinges lightening of doors and windows shutter etc. as & when required as per instructions of EIC
200
-
95.48
... More
Petty carpentary repair works such as large repair works as doors and windows repairing old shutter repairing & refixing, false ceiling repair, etc as and when required as per instruction of EICetc.
120
-
190.95
... More
P&F PVC cistern fittings with handle complete set as per instruction of EIC
120
-
200.45
... More
Total impact of GST for the purpose of CTC
1
-
1173746.27
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements