Northern Coalfields Limited Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Northern Coalfields Limited - NCL Tender
Civil And Construction
Civil Works Others
Building Construction
Eprocure
Opening Date31 Dec 2024
Closing Soon17 Jan 2025
Tender Amount₹ 52,93,261
Costs
EMD
₹ 66,200Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_NCL_324652_1Tender No
NCL/CSR/HOD (CSR)/GM (Civil)/24-25/ETN-29 Dated 31.12.2024Tender Authority
Northern Coalfields Limited ViewPurchaser Address
-Website
http://http://nclcil.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Of area 3 sq. metres and below
4
207
829.4
... More
Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer- in-Charge. (a) Internal Work-
Exposed on wall
60
2
147
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead
as per direction of Engineer-in-charge.
-
-
-
... More
In cement mortar
7.24
1130
8186.27
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
20.26
30
613.88
... More
Taking out doors, windows and clerestory window shutters (steel or wood)
including stacking within 50 metres lead :
-
-
-
... More
Of area 3 sq. metres and below
7
80
564.9
... More
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
147.6
31
4715.82
... More
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
4.46
146
653.84
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking
material within 50 metres lead.
-
-
-
... More
For thickness of tiles 10 mm to 25 mm
413.14
41
17124.65
... More
Brick work with FALG bricks of class designation 7.5 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
3.16
5193
16412.41
... More
Brick work with FALG bricks of class designation 7.5 in superstructure above
plinth level up to floor V level in all shapes and sizes in :
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
7.4
6306
46667.73
... More
Half brick masonry with FALG bricks of class designation 7.5 in foundations and
plinth in :
-
-
-
... More
cement mortar 1:4 (1 cement : 4 coarse sand)
30.24
657
19882.8
... More
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
-
-
-
... More
Double charge vitrified tile polished finish of size
-
-
-
... More
Size of Tile 600 x 1200 mm
248.59
1154
286984.73
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S.
15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.
-
-
-
... More
Size of Tile 600x600 mm
164.25
1195
196328.03
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
-
-
-
... More
Granite stone slab colour black, Cherry/Ruby red
-
-
-
... More
Area of slab upto 0.50 sqm
3.43
3821
13107.4
... More
Area of slab over 0.50 sqm
8.82
3660
32288.26
... More
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3
graded stone aggregate 20 mm nominal size derived from natural sources)
4.62
6510
30077.36
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
976.3
566
552732.25
... More
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
-
-
-
... More
Ridges plain (500 - 600mm)
68
370
25177
... More
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking
the material within 50 metres lead of:
-
-
-
... More
G.S. Sheet
976.3
92
90356.56
... More
Extra for providing and fixing wind ties of 40x 6 mm flat iron section.
399
191
76408.5
... More
Providng and fixing Rimless Single piece-WC with UF soft close seat cover, Tornado flushing, Hinges, Fixing Accessories and Accessories Set, Cistern fittings, S Trap-300 mm, Size: 360 x 675 x 750mm (Jaguar make or equivalent) (OPS-WHT-15853S300UF)
4
32276
129105.4
... More
Providng and fixing Towel Rack 600mm Long Without Lower Hangers but with 3 hooks(Jaguar make or equivalent) (ACN-1181FHS)
4
3275
13101.6
... More
Providng and fixing Toilet Roll Holder with Flap (Jaguar make or equivalent)(ACN-1153N)
4
1113
4452.6
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of
approved quality conforming to IS:8931
-
-
-
... More
15mm nominal bore
20
534
10685
... More
Providng and fixing 2 Way Bib Cock with Wall Flange(Jaguar make or equivalent) (KUP-35041P)as per instruction of EIC.
5
2652
13264.5
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm
thick hard board backing :
-
-
-
... More
Rectangular shape 1500x450 mm
2
1456
2913.9
... More
Providing and fixing Sink Mixer with Regular Swinging Spout (Wall Mounted Model) With
Connecting Legs & Wall Flanges (Jaguar make or equivalent)( LYR-38309) complete in all repsect as per EIC.
1
5048
5048.55
... More
Providng and fixing wall hung wash Basin with full pedestal,fixing accessories set , Size: 560 x 470 x 195mm of Jaguar make or equivalent (ARS-WHT-39801) with Single Lever Basin Mixer without Popup Waste with 450mm Long Braided Hoses (Jaguar make or equivalent)(KUP-35011BPM ) and with Waste coupling 32mm Size Half Thread with 80mm height (Jaguar make or equivalent) (ALD-709 ) complete in all respect as per EIC.
4
13621
54484.8
... More
Providing and fixing Half stall Urinal of size 355 x 345 x 535 mm (Jaguar make or equivalent)(URSWHT-13261) complete in all repsect as per EIC
3
4560
13681.5
... More
Providing and fixing Urinal Valve Auto Closing System with Built-in Control Cock & Wall Flange (Jaguar make or equivalent)( PRS-077) complete in all repsect as per EIC
3
2529
7589.55
... More
Providing and fixing Urinal Spreader bowl Top Inlet 15mm with Fixing Stud (Jaguar make or equivalent)( ALD-1043) complete in all repsect
as per EIC.
3
558
1674
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and
finished smooth.
-
-
-
... More
Granite Stone of approved shade
1.22
3075
3752.29
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc.,
including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
-
-
-
... More
Granite work
16
302
4836
... More
Providing and fixing hand shower( health Faucet) with 8 mm dia. 1.20 meter long flexible tube and wall Hook of jaguar make or equivalent.(ALD-CHR-573)
4
1627
6508.4
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :
-
-
-
... More
45 cm length
-
-
-
... More
15 mm nominal bore
10
73
739.5
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
... More
Flexible pipe
-
-
-
... More
32 mm dia
6
90
543.6
... More
Providing and fixing 100 mm CP grating for gully trap.
8
39
314.4
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
... More
Kitchen sink with drain board
-
-
-
... More
510x1040 mm bowl depth 225 mm
1
5534
5534.95
... More
Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastner with necesary stainless steel screws, all complete as per direction of Engineer-incharge.
18.31
334
6117.37
... More
Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire
retardent having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge.
11.16
3940
43977.65
... More
Basket Made up of ss wire of required size make Hettich or equivilent.
4
3949
15796.4
... More
Slider Channel soft closing make Hettich,KAF or equivilent.
16
1277
20442.4
... More
Providing and fixing concealed hinge of approved quality for 19-20mm thick door with stainless steel screws complete :
30
96
2895
... More
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.
-
-
-
... More
Kiln seasoned and chemically treated hollock wood
-
-
-
... More
35 mm thick
7.29
2495
18189.64
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and
face veneers on both faces of shutters.
-
-
-
... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
13.23
2569
33991.84
... More
Providing and fixing chromium plated brass handles with necessary screws etc. complete:
-
-
-
... More
125 mm
10
195
1953.5
... More
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete
10
200
2009.5
... More
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws
etc. complete.
10
873
8735.5
... More
Providing and fixing chromium plated brass curtain rod having wall thickness of
1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :
-
-
-
... More
25 mm dia
49.5
416
20629.13
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required
colour or shade, with nuts and screws etc. complete :
-
-
-
... More
300x16 mm
20
219
4389
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or
shade, with necessary screws etc. complete :
-
-
-
... More
125 mm
20
50
1017
... More
Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete.
10
72
725
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour
or shade, with necessary screws etc. complete :
-
-
-
... More
300x10 mm
6
99
598.5
... More
250x10 mm
10
88
882.5
... More
Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer's specifications and direction of Engineerin-charge
-
-
-
... More
Decorative finish (both side wood grained finish)
9.45
2710
25610.44
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
-
-
-
... More
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I)
:2011 (Board with BIS certification marks)
147.6
867
128109.42
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with
M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
-
-
-
... More
Fixed to steel windows by welding
62.1
170
10575.63
... More
12 mm cement plaster of mix :
-
-
-
... More
1:6 (1 cement: 6 fine sand)
108.07
215
23283.68
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall
etc. complete.
-
-
-
... More
75 mm
10
224
2246.5
... More
110 mm
10
223
2234.5
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.
-
-
-
... More
80x1.25 mm M.S. laths with 1.25 mm thick top cover
23.04
2495
57492.86
... More
Providng and fixing Towel Ring Round with Round Flange(Jaguar make or equivalent) (ACN-1121BN)
4
1083
4333.8
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
... More
75 mm diameter
40
163
6526
... More
110 mm diameter
64
250
16022.4
... More
Single tee with door
-
-
-
... More
75x75x75 mm
4
122
491.6
... More
110x110x110 mm
4
178
713.4
... More
Removing dry or oil bound distemper, water proofing cement paint and the like by
scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
2542.38
14
36864.51
... More
Providing and applying white cement based putty of average thickness 1 mm, of
approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2542.38
94
238983.72
... More
Finishing walls with Acrylic Smooth exterior paint of required shade :
-
-
-
... More
Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint
surface
850.08
68
58315.49
... More
Wall painting with plastic emulsion paint of approved brand and manufacture to
give an even shade:
-
-
-
... More
One or more coats on old work
2542.38
65
166525.89
... More
Applying priming coat:
-
-
-
... More
With ready mixed pink or Grey primer of approved brand and manufacture on
wood work (hard and soft wood)
39.86
44
1789.71
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade :
-
-
-
... More
Two or more coats on new work
39.86
95
3814.6
... More
Painting with synthetic enamel paint of approved brand and manufacture of
required colour to give an even shade :
-
-
-
... More
One or more coats on old work
819
63
51597
... More
Providing and pasting of metallica ll wallpaper of approved manufacture with using favicol and other chemical in proper portion as adhesive for pasting on wallpaper should be pasted on wall faces free from wrinkles and as directed by Engineer in Charge including tools and tackles complete.
91
1485
135216.9
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good
the walls etc.
-
-
-
... More
15 mm nominal dia Pipes
30
329
9897
... More
25 mm nominal dia Pipes
80
490
39232
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) :
-
-
-
... More
20 mm nominal bore
4
377
1510
... More
40 mm nominal bore
2
614
1228.1
... More
Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of
Engineer-in charge.
-
-
-
... More
Long pattern W.C Pan of size 580x440 mm
1
2271
2271.9
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm
diameter and weighing not less than 440 grams.
6
31
188.1
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of
aluminium snap beading shall be paid in basic item):
-
-
-
... More
With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
17.6
1065
18754.56
... More
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in
both directions with wire of dia. 0.50 mm all complete.
-
-
-
... More
With 2nd class teak wood beading 62X19 mm
36
1152
41499
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions,
i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
... More
For fixed portion
-
-
-
... More
Polyester powder coated aluminium (minimum thickness of polyester powder
coating 50 micron)
28.35
395
11203.92
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for
separately)
-
-
-
... More
Polyester powder coated aluminium (minimum thickness of polyester powder
coating 50 micron)
26.33
468
12326.39
... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @
0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :
-
-
-
... More
3 mm thick
393.61
435
171594.28
... More
Grading roof for water proofing treatment with
-
-
-
... More
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm
nominal size)
29.52
6163
181936.19
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar
1:3 (1 cement : 3 fine sand) as per standard design :
-
-
-
... More
In 75x75 mm deep chase
39.5
188
7447.73
... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
25.2
3884
97880.58
... More
Carriage of earth lead 1km.
30
96
2907.3
... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
4
8312
33249.6
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete
as per standard design.
-
-
-
... More
With FALG bricks of class designation 7.5
2
19467
38934
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming
coat of approved steel primer all complete.
150
115
17257.5
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped
washers etc. complete.
-
-
-
... More
Hot finished welded type tubes
350
123
43277.5
... More
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
8
275
2204.8
... More
Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3
coarse sand), cost of required centering, shuttering complete :
-
-
-
... More
1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3
graded stone aggregate 20 mm nominal size derived from natural sources).
3.15
12083
38063.66
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending,
placing in position and binding all complete above plinth level.
-
-
-
... More
Cold twisted bars
315
101
31893.75
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area
cleared.
302.22
9
2916.42
... More
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:
-
-
-
... More
All kinds of soil
302.22
71
21502.95
... More
Supplying and filling in plinth with sand under floors, including watering,
ramming, consolidating and dressing complete.
30.22
1634
49387.03
... More
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3
graded stone aggregate 20 mm nominal size derived from natural sources)
30.22
6510
196739.76
... More
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
302.22
768
232225.85
... More
Providing and fixing of Vinyl sports flooring 4.5 mm thick(wooden shade or equivalent) .(Super sports or equivalent) along with 10 mm thick rubber tiles of size 500 mm x 500 mm.The joints of vinyl flooring roll shall be joined use of PVC welding rods by Heat welding. All works complete in all respect as per instruction of Engineer-In charge.
108
3011
325269
... More
Total impact of GST for the purpose of CTC
1
807446
807446.62
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%