Northern Coalfields Limited Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Northern Coalfields Limited - NCL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date2 Nov 2024
Closing Date20 Nov 2024
Tender Amount₹ 1,76,85,733
Costs
EMD
₹ 2,21,100Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Operation, Maintenance And Providing Civil And Electrical Maintenance Including Facility Management Services For Office And Or Residential Complex At Nigahi Area For Two Months
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_NCL_320415_1Bid Award Id
ViewTender No
NGH/C/24-25/ETN-48 dated 02.11.2024Tender Authority
Northern Coalfields Limited ViewPurchaser Address
-Website
http://http://nclcil.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Notice Inviting Tender and Instruction to Bidder along Annexures
BOQ Items
... More
Extra rates for quantities of works, executed : Note for item no. 2.24:- The extra percentage rate is applicable in respect of each item but limited to quantities of work executed in these difficult conditions. The unit, namely, metre depth, to be considered for payment, shall be the depth measured from the sub soil water level upto the centre of gravity of the quantity executed in difficult conditions. The depth shall be reckoned correct to 0.1 metre. 0.05 metre or more shall be taken as 0.1 metre and less than 0.05 metre ignored. In or under water and/or liquid mud, including pumping out water as required.
125
41
5167.5
... More
Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil
5425
18
101447.5
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
4517
9
43589.05
... More
Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm
2
2221
4443.6
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter
12.5
292
3660
... More
Cleaning of surface drain including disposal of muck/sludge through trolley or other arrangement to a specified place(in no case it shall be kept on drain banks) within a lead of 1Km complete with all tools & tackles as per instruction of EIC Above 300mm and upto 600m wide
153201
2
453474.96
... More
Cleaning of surface drain including disposal of muck/sludge through trolley or other arrangement to a specified place(in no case it shall be kept on drain banks) within a lead of 1Km complete with all tools & tackles as per instruction of EIC Above 600mm
42719
3
168312.86
... More
Operation & safety of borewell installed in colony area (Permanent Township) as and when required to operate on regular basis to supply water in park area for emergency restoration of weater suplly when IWSS fail/required to park/required to colny sector-wise in laid pipeline.
51
2147
109528.11
... More
Providing and making connection of pump with cable 4.0 sqm.
50
121
6069
... More
Operation of submersible pump set installed in bore wells in temporary township and regulating necessary valves provided in the pipeline network to ensure requisite water supply to various section located in the temp. township as per requirement and instruction of the EIC.The supply is to be maintained for atleast in two shift of eight hrs. including supervision,inspection and prompt repairing of any breakdown / hindrance for immediate for valve of work/day in two shift with minimum manpower per day.
(i) Semi-skilled : 4 Nos
(ii) Skilled (fitter) : 1 No
61
3487
212766.78
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 40 mm dia nominal bore
19
455
8661.15
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 50 mm dia nominal bore
21
563
11837.7
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. INTERNAL WORK - EXPOSED ON WALL 15 mm dia nominal bore
62.5
259
16228.12
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. INTERNAL WORK - EXPOSED ON WALL 20 mm dia nominal bore
45
309
13909.5
... More
Providing and fixing brass bib cock of approved quality : 20 mm nominal bore
1
284
284.7
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
31
1089
33776.05
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
1
446
446.65
... More
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White
28
840
23534
... More
Providing and fixing 100 mm sand cast Iron grating for gully trap.
48
39
1886.4
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore
3
565
1695.75
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 50 to 80 mm nominal bore
1
1188
1188.6
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Angle back wash basin size 600 x 480 mm with single 15 mm C.P. brass pillar tap
2
2365
4731.2
... More
Providing and fixing gun metal non- return valve of approved quality (screwed end) : 50 mm nominal bore. Horizontal
1
1018
1018.9
... More
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)(Every four months)
947042
-
236760.5
... More
Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge.
4
241
967.4
... More
Supply of GI Socket Reducer 25 mm to smaller size
6
30
182.94
... More
Supply of GI Socket Reducer 40 mm to 25 mm size
2
79
158.54
... More
Supply of GI Socket Reducer 50 mm to 40 mm size
1
91
91.47
... More
Supply of GI Elbow 40 mm dia
1
79
79.27
... More
Supply of GI Elbow 50 mm dia
1
121
121.96
... More
Supply of GI tees equal 15 mm dia
35
30
1067.15
... More
Supply of GI tees equal 20 mm dia
3
42
128.07
... More
Supply of GI tees equal 40 mm dia
3
97
292.71
... More
Supply of GI Unions 15 mm dia
3
42
128.07
... More
Supply of GI Unions 20 mm dia
3
60
182.94
... More
Supply of GI Unions 25 mm dia
2
79
158.54
... More
Supply of GI Unions 40 mm dia
4
146
585.4
... More
Supply of GI Unions 50 mm dia
4
219
878.08
... More
Supply of GI Plugs 15 mm dia
2
6
12.2
... More
Supply of GI Plugs 20 mm dia
1
9
9.76
... More
Supply of GI Plugs 25 mm dia
1
14
14.63
... More
Supply of GI Plugs 40 mm dia
1
19
19.51
... More
Supply of GI Plugs 50 mm dia
1
30
30.49
... More
Providing GI Socket (equal) as per ISI approved 40 mm dia
1
48
48.78
... More
Providing GI Socket (equal) as per ISI approved 50 mm dia
1
97
97.57
... More
Providing & Fixing steel Spandle with chuck nut of required size for CI Sluice valve : 50 mm dia
3
522
1568.04
... More
Providing & Fixing steel Spandle with chuck nut of required size for CI Sluice valve : 80 mm dia
1
900
900.16
... More
Providing & Fixing of sluice valves (with cap) complete with nut,bolts,rubber washer etc. complete : 50 mm dia
2
1442
2884
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. : 80 mm diameter Class II
1
3567
3567.26
... More
Providing and fixing nut bolt for flange of approved quality as per instruction of EIC
3
139
418.14
... More
Supply of gallon dori for GI Sluice valve 6 mm to 20 mm thick of approved quality as per instruction of EIC
2
209
418.14
... More
Lifting the damaged submersible pump and motor cable etc,replacing it with working one and lowering the pump and motor assembly including cable in bore holes dismanteling the pipe during lifting and fixing the pipe during lowering with all materials and labour ,tools and plant etc complete as per inst of EIC
2
4887
9774.84
... More
Providing and fixing rubber packing 5 mm thick complete as per instruction of EIC
3
116
348.45
... More
Cleaning of choked GI pipeline 15 mm to 40 mm dia including trenching,refitting at same place complete as per instruction of EIC
50
20
1036
... More
Providing GI flange ISI/Approved quality 50 mm dia
2
116
232.3
... More
Providing GI flange ISI/Approved quality 80 mm dia
1
139
139.38
... More
Supply of washer for bib cock,stop cock etc as per instruction of EIC (1 packet containing minimum 100 Nos for 15 mm dia)
1
16
16.03
... More
Supply of GI nipple 40 mm dia
1
67
67.08
... More
Supply of GI nipple 50 mm dia
1
29
29.2
... More
Supply of GI Elbow Reducer 20 * 15 mm
8
19
155.76
... More
Supply of GI Elbow Reducer 25 * 20 mm
3
25
75.93
... More
Supply of GI Elbow Reducer 40 * 20 mm
1
36
36.99
... More
Supply of GI Elbow Reducer 50 * 20 mm
1
53
53.54
... More
Anti Adult Measures:- General desinfection/pest control with new generation odurless,colourless insecticides which should be safe for human being and effective for all kind of house hold insects like mousquitos ,house flies etc. Using Residual spray of Deltamethrin 2.5%SC Flow (K-otherene or approved equivalant ) insecticides should be sprayed uniformaly over the surfaces of walls ceiling etc. frequency - once in 3 months
151956
111
169142.22
... More
Anti Adult Measures:- General desinfection/pest control with new generation odurless,colourless insecticides which should be safe for human being and effective for all kind of house hold insects like mousquitos ,house flies etc. Using Residual spray of Cyfluthrin 5 % EW (sOLFACE ew 050 OR APPROVED EQUIVLANT )insecticides should be sprayed uniformaly over the surfaces of walls ceiling etc. frequency - once in 3 months
151956
108
164720.3
... More
Thermal fogging:- With chemical Delthamethrine ( King Fog or approved equivalent )1.25 ULV mixed with Diesel in the ratio 1:199 outdoor operation in Colony and Hospital Building etc. Frequency -Monthly
884621
13
121635.39
... More
Anti Larva Measure :Treatment using Diflubenzuron 25 % WP ( Bi-Larva or approved equivalent ) solution to be spread as per - instruction of EIC. Frequency -weekly
253378
51
131579.2
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil
87
152
13241.4
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).
7
6036
42253.05
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size).
12.5
5402
67536.88
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars
137.5
101
13921.88
... More
Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
2
7599
15198.3
... More
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
583
215
125607.35
... More
12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)
125
229
28668.75
... More
Neat cement punning.
125
53
6725
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
7.5
1634
12256.88
... More
Providing and fixing soil, waste and vent pipes :100 mm dia: Sand cast iron S&S pipe as per IS: 1729
17.5
863
15109.5
... More
Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 100 mm dia pipe
137
118
16289.3
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.: 100 mm dia : Sand cast iron S&S as per IS - 1729
5
460
2303.5
... More
Providing and fixing plain bend of required degree. 100 mm dia: Sand cast iron S&S as per IS - 1729
6
358
2151
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet: Sand cast iron S&S as per IS: 3989
23
1246
28668.35
... More
Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks
21
266
5593.35
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge: Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
9
1337
12035.7
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.: In cement mortar
9
1130
10176.3
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
334
30
10120.2
... More
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
12.5
532
6661.25
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter
209
250
52323.15
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door: 110x110x110 mm
12
178
2140.2
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°: 110 mm bend
47
114
5386.2
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain): 110 mm Shoe
32
100
3220.8
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
138
223
30836.1
... More
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. one coat
250
54
13587.5
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work
250
63
15750
... More
Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (One or more coat applied @ 0.90 ltr/10 sqm).
1667
47
79182.5
... More
Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface
208
68
14268.8
... More
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work
333
65
21811.5
... More
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
83
94
7802
... More
Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm
25
3055
76396.25
... More
Providing and fixing terminal guard :100 mm : Sand cast iron S&S as per IS - 1729
9
341
3069.9
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
83
845
70168.2
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Double charge vitrified tile polished finish of Size of Tile 600x600 mm. Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm.
75
1070
80283.75
... More
Providing and fixing PTMT grating of approved quality and colour. Circular type: 100 mm nominal dia
42
28
1211.7
... More
Providing and fixing PTMT grating of approved quality and colour. Circular type 125 mm nominal dia with 25 mm waste hole
25
39
982.5
... More
Providing and fixing 15 mm C.P. brass pillar taps: 15 mm C.P. brass pillar taps
8
360
2886
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.: Semi rigid pipe: 32 mm dia
138
78
10895.1
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.: Semi rigid pipe : 40 mm dia
100
88
8825
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. INTERNAL WORK - EXPOSED ON WALL: 25 mm dia nominal bore
37
398
14726
... More
Providing and fixing brass bib cock of approved quality : 15 mm nominal bore
42
263
11077.5
... More
Providing and fixing brass stop cock of approved quality : 15 mm nominal bore
17
263
4483.75
... More
Providing and fixing brass stop cock of approved quality : 20 mm nominal bore
4
284
1138.8
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
5
462
2310.75
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
4
614
2456.2
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore
1
762
762.45
... More
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 15 mm nominal bore
3
261
785.55
... More
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 20 mm nominal bore
3
302
906.15
... More
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 25 mm nominal bore
3
388
1164.15
... More
Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length: 15 mm nominal bore
121
74
8984.25
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter
35
144
5054
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank: Circular tank
2083
8
17393.05
... More
Providing and fixing PTMT bib cock of approved quality and colour.: 15mm nominal bore, 86 mm long, weighing not less than 88 gms
275
95
26221.25
... More
Providing and fixing PTMT pillar cock of approved quality and colour: 15 mm nominal bore, 107 mm long, weighing not less than 110 gms
27
156
4237.65
... More
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.:15 mm nominal bore, 105 mm long, weighing not less than 138 gms
32
140
4488
... More
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.: 20 mm nominal bore, 120 mm long, weighing not less than 198 gms
1
194
194.05
... More
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.: 25 mm nominal bore, 152mm long, weighing not less than 440 gms
2
398
797.6
... More
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450 mm
25
974
24365
... More
Providing and fixing kitchen sink including making all connections excluding cost of fittings.: White glazed fire clay sink of size 600x450x250 mm
4
1609
6438
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
18
724
13032
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
29
423
12278.6
... More
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 100x58x1.90 mm
25
30
768.75
... More
Renewing wrought iron or ms wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete
1
137
137.15
... More
Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.
12
53
637.2
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 150x10 mm
21
43
919.8
... More
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
2
873
1747.1
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm
4
197
789.6
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm
4
64
256.2
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm
4
50
203.4
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 mm
8
45
361.2
... More
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 30 mm thick plain PVC door shutters
4
2079
8319.2
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
8
1640
13120.8
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
125
104
13025
... More
Renewal of old putty of glass panes (length)
83
32
2701.65
... More
Providing and fixing bright finished brass hard drawn hooks and eyes : 150 mm
2
51
102.6
... More
Providing and fixing bright finished brass hard drawn hooks and eyes : 100 mm
2
44
89.8
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness
3
1065
3196.8
... More
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
167
44
7498.3
... More
Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 20 mm dia
8
323
2590.8
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
1
610
610.8
... More
Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete.
21
407
8561.7
... More
Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 150 mm
6
23
141.3
... More
Providing and fixing aluminum U beading of required size to Pre-laminated/flush door shutter, including fixing etc. complete as per direction of Engineer-in-charge
17
460
7825.95
... More
30 mm thick wire mesh shutter
8
2254
18032
... More
Providing and fixing ball bearing for rolling shutters.
2
368
736.5
... More
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
4
787
3150.2
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for door, windows and clerestory window, panelling or panelled or panelled and glazed shutters 25mm to 40mm thick kiln seasoned and chemically treated hollock wood.
12.5
1677
20965.63
... More
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. Without 2nd class teak wood beading 62X19 mm
8
587
4696.08
... More
Providing Nickel plated bright finished mild steel piano hinge 1mm thick 25 mm wide with necessary screws.
3
39
117
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces
3
4240
12721.05
... More
Providing and fixing by welding hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. and priming coat with approved steel primer all complete
8
1211
9690.4
... More
Welding of hinge, gate locking arrangement, pintel door, window frame and grill etc
100
38
3868
... More
Providing and fixing 4 mm thick plywood plane lining with necessary screws, priming coat on exposed surface etc. complete with commercial ply facing of approved manufacturer : 4 mm thick both side commercial ply
21
275
5775.42
... More
Providing and fixing 18 mm thick both side commercial ply wood board in shelves with screws and fitting as and when required .edges to be painted with wood primer(fittings to be paid separately)
17
466
7922
... More
Supply of ply wood water proof ply 12 mm thick
33
510
16830
... More
Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe.
1
2630
2630.65
... More
Re-lettering with black Japan paint of approved brand and manufacture.
8334
3
29169
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
30
745
22356
... More
Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. 8mm thick. Granite of any colour and shade
4
2414
9659
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab upto 0.50 sqm
2.5
3821
9553.5
... More
Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.
7
1914
13398.35
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
30
41
1243.5
... More
Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 gms.
1
80
80.5
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work: 25 mm dia nominal bore
4
336
1344
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
4
667
2669
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.: 15 mm nominal bore
3
582
1747.65
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 :15mm nominal bore
4
534
2137
... More
Providing and fixing PTMT, push cock of approved quality and colour.: 15 mm nominal bore, 98 mm long, weighing not less than 75 gms
1
83
83.75
... More
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid
17
509
8656.4
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm
1
885
885.5
... More
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore
18
500
9015.3
... More
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 20 mm nominal bore
17
524
8909.7
... More
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :25 mm nominal bore
13
593
7719.4
... More
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 40 mm nominal bore
11
727
8001.95
... More
Cement concrete flooring 1:2:4 finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps, etc. complete 25 mm thick with 12.5 mm nominal size stone aggregate
1250
323
403750
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
8
1344
10756.8
... More
Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board: 510x1040 mm bowl depth 200 mm
4
5186
20746
... More
Providing and fixing CP waste jalli : 32 mm
23
89
2047.92
... More
Providing and fixing CP waste jalli : 40 mm
19
95
1809.75
... More
Brickwork with non-modular FALG bricks conforming to IS: 12894,class designation 7.5 average compressive strength etc. complete in all respect in foundation and plinth : In cement mortar 1:6 (1 cement : 6 Coarse Sand)
12.5
5193
64922.5
... More
Brickwork with non-modular FALG bricks conforming to IS: 12894,class designation 7.5 average compressive strength etc. complete in superstructure above plinth level upto floor V level : In cement mortar 1:6 (1 cement : 6 Coarse Sand)
7.5
6306
47298.38
... More
Half-brickwork with non-modular FALG bricks conforming to IS: 12894,class designation 7.5 average compressive strength etc. complete in all respect in foundation and plinth : In cement mortar 1:4 (1 cement : 4 Coarse sand)
42
657
27615
... More
Half-brickwork with non-modular FALG bricks conforming to IS: 12894,class designation 7.5 average compressive strength etc. complete in all respect in superstructure above plinth level upto floor V level : In cement mortar 1:4 (1 Cement : 4 Coarse Sand)
8
779
6236
... More
Supply of GI elbow 15 mm nominal bore
42
19
819.42
... More
Supply of GI elbow 20 mm nominal bore
27
30
823.23
... More
Supply of GI elbow 25 mm nominal bore
17
39
663.51
... More
Supply of GI Tee 20 mm nominal bore
14
42
597.66
... More
Supply of GI Tee 25 mm nominal bore
12
24
291.96
... More
Supply of GI Socket 15 mm nominal bore
100
13
1342
... More
Supply of GI Socket 20 mm nominal bore
25
18
457.25
... More
Supply of GI Socket 25 mm nominal bore
19
29
556.13
... More
Supply of GI Nipple 15 mm nominal bore
150
12
1830
... More
Supply of GI Nipple 20 mm nominal bore
50
30
1524.5
... More
Supply of GI Nipple 25 mm nominal bore
30
48
1463.4
... More
Supplying and fixing of PVC cover for PVC/Sintex tank as and when required as per instruction of EIC
61
160
9777.69
... More
Cleaning of sludge line and traps (kitchen & toilet) of all diameters at different floors including opening of joints, cleaning of pipe line and again jointing and flushing with fresh water all complete with tools and tackles as per instruction of EIC.
167
16
2728.78
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Kiln seasoned selected planks of sheesham wood 30 mm thick shutters
2
2406
4813.1
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Particle Board 12 mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked
2
1848
3696.8
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
3
1523
4571.85
... More
25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws
1
1478
1478.85
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
17
170
2895.1
... More
Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 100x58x1.90 mm
5
29
147
... More
Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 75x47x1.70 mm
7
24
169.4
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm
25
140
3501.25
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 200x10 mm
25
50
1268.75
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 100x10 mm
42
32
1344
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm
25
28
722.5
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 100 mm
42
23
970.2
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
50
115
5752.5
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x5 mm angle iron and 2 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 20x5mm for diagonal braces and central cross piece
1
4033
4033.75
... More
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
17
122
2083.35
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
83
427
35453.45
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I
8
867
6943.6
... More
12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)
42
281
11829.3
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
42
95
4019.4
... More
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm
1
740
740.8
... More
White washing with lime to give an even shade : Old work (two or more coats)
542
13
7344.1
... More
Distempering with 1st quality acrylic distemper (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade. One or more coats on old work.
594
41
24383.7
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: Old work (One or more coat applied @ 0.90 ltr/10 sqm).
833
58
48647.2
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
1
825
825.3
... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below
8
80
645.6
... More
Supplying and stacking at site. Moorum
4
742
2968
... More
Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire
8
15
124.8
... More
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
2
6163
12326.3
... More
Reparing of old MS door shutter by using 1mm thisk MS sheet and flat of requried by weilding and priming all complete
37
98
3644.13
... More
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
8
232
1858.4
... More
Deduction for not providing hinges in pannel door window clearstorey window etc all complete as per direction of EIC kiln seasoned selected palnk of sheesham wood.
8
-175
-1406.8
... More
Spreading and levelling to gradient kankar/single/gravel/Morrum/ red bajri etc
4
28
114.32
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
17
432
7344.85
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( + 0.05 %), total coated thickness with zinc coating 120 gm per sqm as per IS:277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
8
566
4529.2
... More
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
17
31
543.15
... More
Providing and fixing bowl for coupled wc with pp soft close seat cover, hinges, fixing accessories set size 375 x 650 x 770 mm with cistern and fittings of jaguar make or equivilent.
1
10830
10830.58
... More
Providing and fixing hand shower of jaguar make or equivilent.
2
1080
2161.76
... More
Providing and fixing swivel towel holder twin type of jaguar make or equivilent.
1
2089
2089.8
... More
Providing and fixing angular stop cock with wall flange of jaguar make or equivilent.
2
908
1817.22
... More
Providing and fixing two way bib cock with wall flange of jaguar make or equivilent.
1
1548
1548.43
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall 20 mm nominal outer dia. Pipes.
8
251
2013.2
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall 25 mm nominal outer dia .Pipes.
17
324
5509.7
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall 32 mm nominal outer dia. Pipes.
17
398
6777.9
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia .Pipes.
3
392
1178.7
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia .Pipes.
3
490
1471.2
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. 32 mm nominal outer dia .Pipes.
3
565
1696.95
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work 40 mm nominal outer dia. Pipes.
3
454
1364.7
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work 50 mm nominal outer dia. Pipes.
3
674
2022.6
... More
Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I. plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified.
4
993
3972.6
... More
Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I. plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick flat.
1
879
879.65
... More
Providing and fixing Stainless Steel A Isis 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x460 mm bowl depth 200 mm.
2
2709
5418.6
... More
Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes.
42
135
5705.7
... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
2
2337
4674
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade :Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface
833
87
72471
... More
French spirit polishing :Two or more coats on new works including a coat of wood filler
17
263
4477.8
... More
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.
8
121
972.4
... More
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead 100 mm dia pipe .
17
42
728.45
... More
Refixing of CI pipe as per instruction of EIC
17
55
935.68
... More
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :For 100 mm dia pipe
4
222
889.2
... More
Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material Beyond 60 cm girth upto and including 120 cm girth
4
1304
5217.8
... More
Removing and uprooting of unwanted Vegetation grown over the drainage pipes, walls, chhajjas, balcony and similar locaton of building upto floor Vth level with all tools & plants required with safety precautions and making good the same with plaster including disposal of material / tree roots etc. at the required place all complete as per instruction of EIC
208
412
85760.48
... More
Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :100x100x100x100 mm Sand cast iron S&S as per IS - 1729
4
901
3607
... More
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100x100x100 mm Sand cast iron S&S as per IS - 1729
5
582
2913.5
... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.With cement mortar 1:4 (1 cement : 4 fine sand)
83
415
34519.7
... More
GI metal ceiling Lay in plain Tegular edge Global whiteProviding and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gsm/sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. colour tiles of size 595x595 mm, and 0.50 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm ( both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
8
1310
10482.4
... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing. The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
17
3884
66030.55
... More
Providing and fixing wall paper as per instruction of Engineer in charge
17
1716
29186.28
... More
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
8
768
6147.2
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Dark shade pigment using ordinary cement
8
780
6240
... More
Small petty repair works such as patches on wall , hole repair etc
125
253
31715
... More
Small petty carpentary work such as small repair of doors, windows, making hole, fixing of miscellaneous fixtures etc.
417
211
87987
... More
Small petty water supply related works
625
63
39656.25
... More
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
83
72
6008.37
... More
Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost).
83
257
21358.39
... More
Providing, erecting, maintaining and removing temporary protective screens made out of specified fabric with all necessary fixing arrangement to ensure that it remains in position for the work duration as required by the Engineer-in- charge. Wooven PVC cloth
83
39
3293.44
... More
Providing and laying S&S centrifugally cast (Spun) iron pipes (Class LA) confirming to IS-1536:150 mm dia pipe
1
1559
1559.7
... More
Providing and laying S&S centrifugally cast (Spun) iron pipes (Class LA) confirming to IS-1536:200 mm dia pipe
1
2640
2640.25
... More
Supplying pig lead at site of work
0.25
24391
6097.88
... More
Providing lead caulked joints to spun iron or CI pipes and specials incl. testing of joints but excluding the cost of pig lead: 150 mm dia meter pipe
1
293
293.5
... More
Providing lead caulked joints to spun iron or CI pipes and specials incl. testing of joints but excluding the cost of pig lead: 200 mm dia meter pipe
1
584
584.45
... More
Providing lead caulked joints to spun iron or CI pipes and specials incl. testing of joints but excluding the cost of pig lead: 300 mm dia meter pipe
1
879
879.35
... More
Providing & Fixing bolts and nuts including washers
17
108
1849.6
... More
Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refiling etc. external work 80 mm dia. Nominal bore.
4
872
3491.4
... More
Welding by gas or electric paint incluidng transportation of plant at site etc complete.
83
2
244.85
... More
Operation of pumps sets installed in and for permanent township of nigahi and regulation of necessary controlling valves provided in the water supply pipe line network to ensure requisite water supply to various sector of residential quarters, service buildings, community building etc. situated in pemanent township as per reuirement. and instruction of the EIC. The supply of water is to be maintained in three shift of 8 hrs working each including routine maintenance and repair of external pipelines and valves of all sizes such as valves leakage, joint repairing / leakage etc. Also routine maintencance of pump sets such as oiling greassing and cleaning for proper running etc. by deploying manpower as reqd. including T & P etc all complete as per instructions of EIC. The following manpower for day to day to be engaged:
(i) Supervisor 1 nos. (ii) pump operator- 9 nos (iii) Valveman - 9 Nos. (iv) fitter- 1 nos (v) Helper-1 nos (Note: In case of not deploying minimum abovementioned workmen, deduction of an amount of double rate of item rate will be made)
61
13305
811605
... More
P & F gland packing in various capacity motor/pumps/ valves
6
209
1254.42
... More
Providing rubber gasket for instruction of pipe joints (flange joints ) of required thickness as approved by EIC
12.5
116
1451.88
... More
Repairing of sluice valve or M.S. spindle and other fittings: 50 mm
1
522
522.68
... More
Repairing of sluice valve or M.S. spindle and other fittings: 80 mm
1
900
900.16
... More
Repairing of sluice valve or M.S. spindle and other fittings: 100 mm
1
1045
1045.35
... More
Repairing of sluice valve or M.S. spindle and other fittings: 150 mm
1
1219
1219.58
... More
Repairing of sluice valve or M.S. spindle and other fittings: 200 mm
1
1393
1393.8
... More
Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
103382
4
506571.8
... More
Cleaning, mopping & washing of floor of public building other places with detergents,bleaching powder etc. all complete with tools,tackles and consumable to make the floor clean & hygienic as per instruction of EIC
1453814
62
909651.42
... More
Cleaning of door shutter,window shutters including chowkhats,windows grills,glass panes,cobwebs etc of service/community buildings with necessary detergents,chemical etc. complete as per instruction of EIC
17386
80
14068.75
... More
Cleaning of toilet with attached with hostel rooms, office chambers etc. including cleaning of floors, skirting & dado, WC pan(India/European type), wash basin, shelves, mirror and other fittings, if any, by hand dusting and cleaning with soap solution, acids, deodorants, phenyl etc. to make the toilet clean and hygienic and providing naphthalene balls in urinals complete with all tools, tackles & consumables as per instruction of EIC(for community & service building)
4106
16
67790.06
... More
Cleaning of general/commom toilet including cleaning of WC pan (Indian/European type),wash basins,urinals by hand dusting and cleaning with soap solution,acids,deodrants,phenyl etc. to make the toilet clean & hygeinic including providing napthalene balls in urinals etc complete with all tools & consumables as per instruction of EIC
6570
24
164118.6
... More
Cleaning of surface drain including disposal of muck/sludge through trolley or other arrangement to a specified place (in no case it shall be kept on drain banks) within a lead of 1Km complete with all tools & tackles as per instruction of EIC Upto 300m wide
116170
2
274161.2
... More
Brooming & cleaning of all roads in colony and within the premises of service building and other places as requried with all tools & tackles and stacking the garbage at specified place as per instruction of EIC.
3123639
23
738428.26
... More
Cleaning of all types of roof including removal of dry leaves,weeding and cleaning drain holes,brooming etc all complete with tools & tackles and stacking the garbage at specified place as per instruction of EIC
43321.25
29
12801.43
... More
Cleaning of Inspection chamber of all sizes and disposal of sludge etc. all specified place outside the colony with all leads including removal & replacing of top cover mending the damages of cover and chamber,if any etc. as per instrution of EIC.
253
197
49841
... More
Supplying and application of following toilet paper like liquid soap, odonil, mosquito reppelllant, room freshner, colin etc Liquid Soap (Fem or equivalant)
62
223
13856.38
... More
Supplying and application of following toilet paper like liquid soap, odonil, mosquito reppelllant, room freshner, colin etc Toilet soap 100 gm (Lifebuoy or equivalent)
102
16
1709.52
... More
Supplying and application of following toilet paper like liquid soap, odonil, mosquito reppelllant, room freshner, colin etc Odonil
239
40
9763.15
... More
Supplying and application of following toilet paper like liquid soap, odonil, mosquito reppelllant, room freshner, colin etc Room Freshner
10
179
1791.7
... More
Supplying and application of following toilet paper like liquid soap, odonil, mosquito reppelllant, room freshner,colin etc Colin (500 ml)
14
72
1019.76
... More
Supplying and application of following toilet paper like liquid soap, odonil, mosquito reppelllant, room freshner, colin etc Mosquito reppellant
140
70
9921.8
... More
Providing services for collection of waste material occurred during the collection of samples and testing of patient at hospital as per instruction of EIC. Unskilled - 01 no. (Note: In case of not providing services, deduction of an amount of double rate of item rate will be made)
49
573
28115.22
... More
Carriage of material by Mechanical Transport including loading, unloading and stacking Earth Lead - 1 Km
73
135
9858.65
... More
Collection of garbage from door to door and disposal of the same through closed vehicle with seperate arrangement of dry / wet waste, necessary sound system and GPS arrangement to the specified place within a lead of 4 kms including sweeping of staircase ( for 1st and 2nd floor etc.) with all tools and tackles complete as per instruction of the EIC. 1st floor (Note:If not collected deduction of an amount of double rate of item rate will be made)
32635
11
390967.3
... More
Collection of garbage from door to door and disposal of the same through closed vehicle with seperate arrangement of dry / wet waste ,necessary sound system and GPS arrangement to the specified place within a lead of 4 kms including sweeping of staircase ( for 1st and 2nd floor etc.) with all tools and tackles complete as per instruction of the EIC. 2nd floor (Note:If not collected deduction of an amount of double rate of item rate will be made)
31771
14
456549.27
... More
Cleaning of D type toilet (floor area up to 10 sqm) including cleaning of dado , skirting, WC pan (Indian/ European type),wash basins, urinals,glass shelves, mirrors and other fittings, if any for D type or equivalent qtr. including any other wash basin out side the toilet by hand dusting and cleaning with soap solution, acids, deodrants, phenyl etc. to make the toilet clean and and hygienic and providing napthalene balls in urinals complete with all tools, tackles & consumables as per instruction of EIC.
2456
24
60736.88
... More
Cleaning of C type toilet (floor area up to 8 sqm) Including cleaning of dado , skirting, WC pan (Indian/ European type),wash basins, urinals,glass shelves, mirrors and other fittings, if any foe C type or equivalent qtr. including any other wash basin out side the toilet by hand dusting and cleaning with soap solution, acids, deodrants, phenyl etc. to make the toilet clean and and hygienic and providing napthalene balls in urinals complete with all tools, tackles & consumables as per instruction of EIC.
2566
18
47137.42
... More
Cleaning of toilet including WC pan,wash basin,other fittings,if any for "B" & lower type Quarter by hand dusting and cleaning soap solution acids,deodorants,phenyl etc.to make the toilt clean & hygienic all complete with tools,tackles & consumables as per instruction of EIC.
11810
12
149396.5
... More
Cleaning of choked sewer line & sludge line of all diameters including removal of earth opening of joints,cleaning of pipeline,making joints leak proof etc all complete including disposal of sludge materials outside the colony with all leads at specified place with tools & tackles as per instruction of EIC
497
14
7345.66
... More
Disposal of dead animal including transportation to the specified place,making earth pit,disposal of dead animal into pit with adequate of salt,lime bleaching power etc. and refilling the pit with wearth all complete with tools,tackles and consumbales as per instruction of EIC. Big animal (Cow,Buffalo,OX and the like)
24
1351
32432.16
... More
Disposal of dead animal including transportation to the specified place,making earth pit,disposal of dead animal into pit with adequate of salt,lime bleaching power etc. and refilling the pit with wearth all complete with tools,tackles and consumbales as per instruction of EIC. Small animal (Dog,Cat,fox,pig,birds and the like)
27
371
10030.5
... More
Trimming of tree branches in colony/plant & near boundary wall including disposal of branches outside the periphery of the colony & plant area as per instruction of EIC
223
58
13052.19
... More
Collection of garbage from door to door and disposal of the same through closed vehicle with seperate arrangement of dry / wet waste, necessary sound system and GPS arrangement to the specified place within a lead of 4 kms including sweeping of staircase ( for 1st and 2nd floor etc.) with all tools and tackles complete as per instruction of the EIC. Ground floor (Note:If not collected deduction of an amount of double rate of item rate will be made)
39904
9
382679.36
... More
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 100x58x1.90 mm
125
30
3843.75
... More
Renewing wrought iron or ms wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete
1
137
137.15
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm
17
140
2380.85
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm
33
28
953.7
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 100 mm
33
23
762.3
... More
Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.
12.5
53
663.75
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 150x10 mm
21
43
919.8
... More
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
4
873
3494.2
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm
7
197
1381.8
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm
10
64
640.5
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm
8
50
406.8
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 mm
8
45
361.2
... More
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 30 mm thick plain PVC door shutters
8
2079
16638.4
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
25
1640
41002.5
... More
Deduct for not providing hinges in doors, windows or clerestory window shutters with : Stainless steel butt hinges with stainless steel screws : For 2nd class teak wood and other class of wood shutters
25
175
4396.25
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
125
104
13025
... More
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm
12.5
740
9260
... More
Renewal of old putty of glass panes (length)
167
32
5435.85
... More
Providing and fixing bright finished brass hard drawn hooks and eyes : 150 mm
2
51
102.6
... More
Providing and fixing bright finished brass hard drawn hooks and eyes : 100 mm
1
44
44.9
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness
3
1065
3196.8
... More
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
250
44
11225
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
250
95
23925
... More
Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 20 mm dia
8
323
2590.8
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
1
610
610.8
... More
Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete.
21
407
8561.7
... More
Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 150 mm
6.25
23
147.19
... More
Providing and fixing aluminum U beading of required size to Pre-laminated/flush door shutter, including fixing etc. complete as per direction of Engineer-in-charge
17
460
7825.95
... More
30 mm thick wire mesh shutter
12.5
2254
28175
... More
Providing and fixing ball bearing for rolling shutters.
2
368
736.5
... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead Of area 3 sq. metres and below
75
80
6052.5
... More
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
8
787
6300.4
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestorey windows, including ISI marked ms pressed butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for seperately, all complete as per the direction of Engineer in charge. Kiln seasoned and chemically treated hollock wood 30 mm thick shutters
33
1848
60997.2
... More
Deduct for not providing hinges in doors, windows or clerestory window shutters with : Stainless steel butt hinges with stainless steel screws : For 2nd class teak wood and other class of wood shutters
33
-175
-5803.05
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for door, windows and clerestory window, panelling or panelled or panelled and glazed shutters 25mm to 40mm thick kiln seasoned and chemically treated hollock wood.
27
1677
45285.75
... More
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. Without 2nd class teak wood beading 62X19 mm
17
587
9979.17
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 25 mm thick (for cupboard) without ISI marked nickel plated bright finished M.S. piano hinges with necessary screws
8
1478
11830.8
... More
Providing Nickel plated bright finished mild steel piano hinge 1mm thick 25 mm wide with necessary screws.
2.5
39
97.5
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces
7
4240
29682.45
... More
Providing and fixing by welding hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. and priming coat with approved steel primer all complete
17
1211
20592.1
... More
Welding of hinge, gate locking arrangement, pintel door, window frame and grill etc
100
38
3868
... More
Providing and fixing 4 mm thick plywood plane lining with necessary screws, priming coat on exposed surface etc. complete with commercial ply facing of approved manufacturer : 4 mm thick both side commercial ply
33
275
9075.66
... More
Providing and fixing 18 mm thick both side commercial ply wood board in shelves with screws and fitting as and when required .edges to be painted with wood primer(fittings to be paid separately)
33
466
15378
... More
Supply of ply wood water proof ply 12 mm thick
67
510
34170
... More
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One or more coats on old work.
1675
54
91036.25
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work
600
63
37800
... More
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work
333
65
21811.5
... More
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm
3.5
740
2592.8
... More
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
83
94
7802
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
7
46
325.85
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
7
1089
7626.85
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
7
724
5068
... More
Lettering with black Japan paint of approved brand and manufacture
1050
3
3675
... More
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
14
232
3252.2
... More
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides
7
620
4343.15
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
2
1523
3047.9
... More
25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places
6.25
2216
13851.25
... More
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 20 mm dia (heavy type)
8
132
1060
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm
28
76
2153.2
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm
14
197
2763.6
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm
28
50
1423.8
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece
3
4033
12101.25
... More
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 30 mm thick shutters, With ISI marked M.S. pressed butt hinges bright finished of required size, Kiln seasoned and chemically treated hollock wood
3.5
2254
7889
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Kiln seasoned and chemically treated hollock wood, 30 mm thick shutters
3.5
1848
6469.4
... More
Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Marine plywood conforming to IS: 710
2
1727
3454.7
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws
3
2071
6213.6
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Ply wood 5 ply, 9 mm thick, Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type
3
1958
5874.75
... More
Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).
58
461
26778.6
... More
Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m.lead complete (Cattle manure measured in stacks will reduced by 8% for Payment).
95
247
23507.75
... More
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge
173
28
4965.1
... More
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
152
41
6300.4
... More
Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (the good earth shall be paid for separately).
22628
27
612087.4
... More
Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge. Play grounds / Public parks (1Mali for 2.00Acre).
226280
1
441246
... More
Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge. Permanent office accommodation.(1Mali for 1.25Acre)
22188
3
68782.8
... More
Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge. Prestigious works / Rajpath/C Hexagon (1Mali for 1.00Acre)
30185
3
116212.25
... More
Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge Open spaces(1Mali for 3.00Acre).
205
1
256.25
... More
Cutting of Hedge/Edge including removing of cut material, cleaning, hoeing of hedge/edge bed watering, manureing and applying insecticides and fungicides etc.(excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge.
7486
18
140362.5
... More
Maintenance of potted plant Earthen pot in displayed at ground floor only in bungalow,office complex including application of good earth, manure, insecticide, pesticide and fertilizer, removing of dry parts by pruning, cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required ( Materials provided by the department) as per direction of officer in charge (For Earthen pot 750 Nos)
4400
19
87560
... More
Maintenance of potted plants Cement pots at ground floor in flats and ground floor bungalow,office complex including application of good earth, manure, insecticide, pesticide and fertilizer, removing of dry parts by pruning, cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required ( Materials provided by the department) as per direction of officer in charge (For of Cement pots 300 no)
2200
49
109450
... More
Providing and Displaying plants Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot, as per direction of the officer-in-charge.
25
32
820
... More
Providing and Displaying Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge.
25
150
3767.5
... More
Providing and displaying of Areca Palm having ht. 2.40 m to 2.70 m with 12 to 14 suckers, well developed, fresh and healthy with lush green foliage in 35 cm size of Bucket type cement pots & as per direction of the officer-in-charge.
8
592
4739.6
... More
Providing and displaying of Croton baby golden variety having ht.30 cm and above, well developed with full of fresh and healthy leaves in 20 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
5
85
425.5
... More
Providing and displaying of Croton Duck foot (Elite) having ht. 45 cm and above with 3 to 4 branches, well developed, fresh and healthy leaves in 25 cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge.
5
112
563.75
... More
Providing and Displaying Cycus cirsnallis well developed with fresh & healthy 35 to 40 lush green leaves in 40 cm Cement Pot as per direction of the officer-in-charge.
5
1947
9737.5
... More
Providing and Displaying Cycus revoluta in 35 cm challi, specimen , having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfrance of base stem well developed as per direction of the officer-in-charge.
5
1183
5919.5
... More
Providing and Displaying Cyprus Golden 30 to 45 cm ht. well developed good Golden colour foliage, Conial Shape in 25 cm Earthen Pots as per direction of the officer-in-charge.
5
379
1896.25
... More
Providing and Displaying Fishtail palm well developed with fresh & healthy foliage leaves of ht 210 to 240cm Specimen in 35 cm Cement Pot as per direction of the officer-in-charge.
5
307
1537.5
... More
Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Chrysanthemum double
5
400
2000
... More
Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Dahlia double
6
525
3150
... More
Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Marigold Inca hybrid
7
500
3500
... More
Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Pansy Hybrid
4
650
2600
... More
Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Salvia Hybrid different colour
4
500
2000
... More
Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Petunia hybrid
4
600
2400
... More
Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Poppy double
4
500
2000
... More
Supply at site good quality pots Earthern pots of 12'' size
250
68
17075
... More
Supply at site good quality pots Mosaic pots of 15'' size
42
134
5634.72
... More
Filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (Two part of Good earth & one port of manure) and placing them on approprite place i/c carriage of earth, manure and pots up to 50 mtr, as per direction of officer incharge. (The cost of good earth, earthen pots & manure will be paid seperately.) Size of Empty Pots 25cm Top dia, 15cm Bottom Dia & 25cm Perpendicular height.
292
17
5124.6
... More
Supplying of various varieties of seeds of seasonal flowers & vegetables. Seeds of flower (Hybrid)
104
42
4439.76
... More
Supplying of various varieties of seeds of seasonal flowers & vegetables. Seeds of flower (Ordinary)
104
7
792.48
... More
Supply of good quality of vegetable seeds (Hybrid)
104
36
3805.36
... More
Planting different varieties of sampling plants including making earth pits, mixing of earth & manure (Cost of earth & manure shall be paid separately) etc. all complete with tools & plants as per instruction of EIC. on ground
3750
2
10575
... More
Planting different varieties of sampling plants including making earth pits, mixing of earth & manure (Cost of earth & manure shall be paid separately) etc. all complete with tools & plants as per instruction of EIC. in pots
1250
3
4412.5
... More
Painting of flower pots as per instructions of EIC. Earthern pots of 12'' size with colour/ terracotta.
1667
2
3650.73
... More
Painting of flower pots as per instructions of EIC. Mosaic pots of 15'' size with enamel paint of approved brand.
417
7
3231.75
... More
Supply of fertilizers/ Insecticides/ Fungicides/ Pesticides etc. Urea
109
10
1124.88
... More
Supply of fertilizers/ Insecticides/ Fungicides/ Pesticides etc. DAP
58
27
1617.04
... More
Supply of fertilizers/ Insecticides/ Fungicides/ Pesticides etc. Bone Meal
25
58
1451.75
... More
Supply of fertilizers/ Insecticides/ Fungicides/ Pesticides etc. Melathian
2.5
777
1942.6
... More
Supply of fertilizers/ Insecticides/ Fungicides/ Pesticides etc. Rogar 30%
2
782
1565.7
... More
Supply of fertilizers/ Insecticides/ Fungicides/ Pesticides etc. Neem Cake
18
63
1149.84
... More
Supply of fertilizers/ Insecticides/ Fungicides/ Pesticides etc. Rose Misture
4
80
320.56
... More
Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts.
1667
47
79932.65
... More
Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge.
167
82
13827.6
... More
Supply of Satna lime
2
405
810.48
... More
Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded).
20
14
287
... More
Fine dressing of the ground.
20
2
58
... More
Providing and Displaying of Duranta Golden plant, having ht.15 to 20 cm bushty shape plant with fresh and healthy leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.
167
20
3340
... More
Supply and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara,Mohan,Scarlet Queen, Varigata, Glabra Formosa, Peruviana Odissi, Partha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) plant of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
167
40
6680
... More
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable
material’s as per direction of officer in charge (excluding cast of plant & water ) Cost of plantation per Shrubs plants.
167
2
475.95
... More
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable
material’s as per direction of officer in charge (excluding cast of plant & water ) Cost of plantation per Hedge plants.
167
1
317.3
... More
Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.
21
209
4402.65
... More
Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, hedge, flower beds, foliages, creepers etc. including hoeing, weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide , lawn mover and brush cutter with fuel will be provided by the Department & other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge. Play grounds / Public parks.
510
1
943.5
... More
Part B
-
-
-
... More
wiring for light point/fan point exhaust fan pint/ call bell with 1.5 sqmm. FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with piano type, phenolic laminated sheet, suitable size M.S. box and earthing piont with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc.as required. Group-A
42
608
25543.14
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 x 1.5 sq. mm Copper wire
333
36
12077.91
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 x 2.5 sq. mm Copper wire
292
48
14188.28
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 x 4.0 sq. mm Copper wire
250
75
18837.5
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 x 6.0 sq. mm Copper wire
209
107
22369.27
... More
Supplying and fixing following Flush / piano type switch/ socket on the existing switch box/ cover including connections etc. as required. ISI Marked. 5/6 A Switch piano type
333
39
13256.73
... More
Supplying and fixing following Flush / piano type switch/ socket on the existing switch box/ cover including connections etc. as required. ISI Marked. 5 pin 5/6 A socket outlet piano type
333
50
16816.5
... More
Supplying and fixing following Flush / piano type switch/ socket on the existing switch box/ cover including connections etc. as required. ISI Marked. 15/16 A Switch piano type
209
96
20201.94
... More
Supplying and fixing following Flush / piano type switch/ socket on the existing switch box/ cover including connections etc. as required. ISI Marked. 6 pin 15/16 A socket outlet piano type
209
111
23405.91
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. ISI Marked. 5/6 A Switch modular
17
85
1450.61
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. ISI Marked. 5 pin 5/6 A socket outlet modular
17
97
1654.27
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. ISI Marked. 15/16 A Switch modular
17
131
2238.9
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. ISI Marked. 6 pin 15/16 A socket outlet modular
17
153
2604.91
... More
supplying and fixing two module stepped/piano Socket type electronic fan regulater on the existing modular plate switch box incluiding connections but excluding modular palte etc. as required. ISI Marked. 2 module Socket Type Electronic fan regulater.
125
299
37467.5
... More
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. ISI Marked.
83
56
4696.97
... More
Supplying and fixing PVC batten/ angle holder including connections etc. as required.
167
79
13201.35
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) ISI Marked. 8 way , Double door
3
1543
4629.24
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. ISI Marked. Single pole 32A
375
174
65576.25
... More
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. ISI Marked. Double pole 40 A
83
296
24636.89
... More
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. ISI Marked. Double pole 63 A
33
337
11136.84
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. ISI Marked. 40 A rating, 2 pole RCCB, 30 mA
100
1837
183714
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. ISI Marked. 63 A rating, 2 pole RCCB, 30 mA
25
2314
57862.75
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. ISI Marked. 250mm pvc Conduit
209
79
16565.34
... More
Providing and fixing plain 16/0.20mm (0.50sqmm) twin circular flexible FRLS PVC insulated, PVC sheathed copper conductor cable direct on the wall with PVC clips etc. as required. ISI Marked.
33
18
604.23
... More
Complete overhauling, greasing of ceiling fan
125
70
8750
... More
Complete rewinding of ceiling fan (dismantling, assembly and commissioning of the same) including material.
46
250
11500
... More
Complete rewinding of exhaust fan (dismantling, assembly and commissioning of the same) including material
42
450
18900
... More
Power supply maintenance work of Permanent township round the clock by engaging 01 nos. supervisors, 09 nos. Electricians and 09 nos. Electrical helpers per day basis (inclusive of Contractor profit & tools tackle
61
14426
880004.3
... More
Supply of materials and main to submain wiring with 4.0 sq.mm PVC insulated insheathed 1100 V grade copper wire and laying the same in suitable size of PVC conduit / casing capping with inspection boxes etc. complete in all respect as per site requirement and direction of EIC. 1.5 sq.mm copper wire shall be sued as earthling wire. All materials should be as per IS specification
33
104
3432
... More
Supply & fixing of one way PVC MCB box with suitable size of teak wood / MS board with Bakelite sheet on top includingconnection work etc. completein all respect as per site requirement (MCB shall be supplied by deptt & all others materials should be as per IS specification)
33
40
1320
... More
Supply and fixing of four way PVC MCB bos with suitable size of teak wood board with arkalite sheet on top includingconnection work etc. complete in all respect as per site requirement (MCB shall be supplied by deptt. & all others materials should be as per IS specification)
33
42
1409.1
... More
Supply & fixing of wooden board size of 8”x10”x2" with sunmica top including fixing of the old/new switches & socket (switch & socket shall be supplied by the deptt
50
60
3000
... More
Supply and fixing of wooden board size of 8”x6”x2" with sunimica top including fixing of the old / new switches and socket (switch & socket shall be supplied by the dept
42
54
2268
... More
Supply and fixing of wooden board size of 7”x4”x2" with sunimica top including fixing of the old / new switches and socket (switch & socket shall be supplied by the dept
83
44
3652
... More
Supply and fixing of wooden board size of 4”x4”x2" with sunimica top including fixing of the old / new switches and socket (switch & socket shall be supplied by the dept
167
35
5845
... More
Supply & laying of 2x6 sq.mm PVC insulated PVC sheathed, 1.1 KV grade armoured heavy duty, ISI market twin core aluminium conductor cable with 10 SWG GI wire in open air from pole to internal main switch / external main switch for replacement of service line connection work including fixing / saddling of cable on wall with suitable size of PVC conduit etc. complete with connection work. Note – Old / burnt service connection wire/cable to deposited at site store & all others materials should be as per IS specition
250
71
17750
... More
Supply & laying of 2x10 sq.mm PVC insulated PVC sheathed, 1.1KV grade unarmoured heavy duty ISI market twin core aluminium conductor cable with 10SWG GI wire in open air from pole to internal main switch / external / main switch for replacement of service line connection work including fixing/saddling of cable on wall with suitable size of PVC conduit etc. complete with connection work. Note: Old / burnt service connection wire / cable to deposited at site store & all others materials should be as per IS specition
333
82
27306
... More
Installation of 1x20/40watt fluorescent / LED tube light fitting on wall / ceiling including all required materials and connection to same etc. complete in all respect & all others materials should be as per IS specition
583
49
28567
... More
Dressing of old / damaged wiring with casing-capping/PVC conduit & others required materials like screw, PVC gully ditofix, saddle etc complete in all respec
375
22
8250
... More
Dressing of old / damaged wiring without casing-capping/PVC conduit & others required materials like screw, PVC gully ditofix, saddle etc complete in all respec
208
16
3328
... More
Handing of ceiling fan (old/new) including all accessories with connection work etc. complete in all respect
208
55
11440
... More
Power supply maintenance work of Temporary township round the clock by engaging 01 nos. supervisors, 03 nos. Electricians and 03 nos. Electrical helpers per day basis (inclusive of Contractor profit & tools tackles
61
5442
331977.86
... More
Facility Manager
61
807
49241.64
... More
Assistant Facility Manager: 5 nos. (Civil - 04 nos., Electrical - 01nos.)
61
3350
204407.95
... More
Total impact of GST for the purpose of CTC
1
2697823
2697823.79
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements