Northern Coalfields Limited Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Northern Coalfields Limited - NCL Tender
Eprocure
Opening Date2 Nov 2020
Closing Date23 Nov 2020
Tender Amount₹ 14,88,99,223
Costs
EMD
₹ 18,78,400Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_NCL_186154_1Bid Award Id
ViewTender No
GM(C)/SGR/20-21/ETN-89Tender Authority
Northern Coalfields Limited ViewPurchaser Address
-Website
http://http://nclcil.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m :All kinds of soil
630
-
269.75
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. Ordinary rock
5093
-
125.95
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50m and lift up to 1.5m,disposed earth to be levelled and neatly dressed. All kinds of soil
7145.4
-
166.4
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out the excavated soil, and then returning the soil as required, inlayers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil
-
-
-
Pipes, cables etc. not exceeding 80 mm dia
800
-
138.05
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
800
-
225.45
Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm.Cable trench
400
-
352
Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre)
475
-
126.86
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
12497.07
-
125.75
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
1176.84
-
878
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift upto1.5 m. All kinds of soil.
4200
-
13.95
Cleaning grass and removal of the rubbish upto a distance of 50 m. outside the periphery of the area cleared.
10138
-
3.65
Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.
-
-
-
Beyond 60 cm girth up to and including 120 cm girth
425
-
972.7
Beyond 120 cm girth up to and including 240 cm girth
10
-
4504.25
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
399.64
-
4701.65
1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
-
-
-
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
-
-
-
1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size).
200
-
4615.25
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
1598.08
-
4349.2
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand including finishing the top smooth
543.48
-
410.65
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete.
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete.
2129.84
-
179.3
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
1455
-
364.25
Suspended floors, roofs, landings, balconies and access platform.
4513.46
-
410.3
Shelves (Cast in situ)
145.86
-
410.3
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
10129.07
-
329.65
Columns, Pillars, Piers, Abutments, Posts and Struts.
4882.72
-
447.2
Stairs, (excluding landings) except spiral-staircases.
248.57
-
376.6
Weather shade, Chajjas, corbels etc., including edges.
1395.61
-
466.8
Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like including the cost of required centering, shuttering but excluding cost of reinforcement, with1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mmnominal size).
112.52
-
6003.85
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars.
169618.89
-
47.8
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars.
194434.75
-
47.8
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
1184.06
-
5272.95
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
240.98
-
6203.45
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
1265.65
-
6448.45
Brick work with non modular FALG bricks (FLAG bricks) confirming to IS:12894, class designation -7.5 average compressive strength etc complete in all respect in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
1065.24
-
3585.57
Brick work with non modular FALG bricks (FLAG bricks) confirming to IS:12894, class designation -7.5 average compressive strength etc complete in super structure above plinth level in:Cement mortar 1:6 (1 cement : 6 coarse sand)
2226.63
-
4181.29
Half Brick work with non modular fly-ash-lime bricks (FLAG bricks) confirming to IS:12894, class designation -7.5 average compressive strength etc complete in all respect in foundation and plinth : In Cement mortar 1:4 (1 cement :4 coarse sand)
80
-
448.53
Half Brick work with non modular fly-ash-lime bricks (FLAG bricks) confirming to IS:12894, class designation -7.5 average compressive strength etc complete in all respect super structure above plinth level up to floor V level in:Cement mortar 1:4 (1 cement :4 coarse sand)
3740.1
-
512.37
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
3740.1
-
47.65
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade
-
-
-
Area of slab upto 0.50 sqm
134.98
-
2828.1
Area of slab over 0.50 sqm.
97.96
-
2575.1
Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work.
106.75
-
245.7
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
2597.96
-
662.9
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1stclass hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :
-
-
-
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
871.08
-
1351
25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws.
164.4
-
1302.5
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
1035.48
-
306.65
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: 35 mm thick shutters. With ISI marked stainless steel butt hinges of required size - Second class teak wood.
341.67
-
2543
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.
14446.41
-
102.55
Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 20 mm dia.
602.4
-
303.75
Providing and fixing Aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
-
-
-
300x16 mm
364
-
182.8
250x16 mm
792
-
163.35
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
300x10 mm
44
-
84.85
200x10 mm
1260
-
65.05
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125 mm
1216
-
43.45
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper
330
-
32.25
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc. complete.
108
-
355.95
Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc., complete.
160
-
538.55
Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination on other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 12 mm thick
232.2
-
820.75
Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination on other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 18 mm thick
568.44
-
940.7
Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately)
512
-
10.1
Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer’s specifications and direction of Engineer-in-charge.
Non decorative finish
220.5
-
1983.3
Providing and fixing PVC rigid foam sheet 1 mm. thick on existing door shutters (bathroom & wc doors) using synthetic rubber base adhesive.
151.2
-
786.15
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
1450
-
49.5
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:
1042
-
59.4
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece.
319
-
2542
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
13038.5
-
64.1
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Salwood
1.8
-
68058.05
Providing and fixing circular / hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron / M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
256
-
108.45
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
4792
-
78.15
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
4329.89
-
395.05
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS :15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.
422.58
-
601.5
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
67.92
-
515.2
Providing and laying matt finished vitrified tile of size 300x300x9.8mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
362.9
-
651.45
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08%and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
4726.62
-
923.15
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i)Single socketed pipes. 110 mm diameter
872.67
-
210.6
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.
-
-
-
Single tee with door
-
-
-
110x110x110 mm
118
-
156.55
Bend 87.5°
-
-
-
110 mm bend
115
-
99.2
Shoe (Plain)
-
-
-
110 mm Shoe
108
-
86.55
Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm
549
-
173.1
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
-
-
-
Ridges plain (500 - 600mm).
-
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
30160.3
-
152.05
12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement : 4 fine sand)
3591.88
-
197.85
6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand)
6786.63
-
135.75
Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm)
2210
-
54.8
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).
13971.31
-
85.7
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
1687.66
-
33.2
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat)
-
-
-
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:
-
-
-
Two or more coats on new work.
-
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.
3239
-
73
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
34563.48
-
79.4
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
Two coats
19977.33
-
67.55
Demolishing RCC work manually/ by mechanical means including stacking steel bar and stacking unserviceable materials within 50 metres lead as per direction of Engineer - in - charge.
36
-
1454.55
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar
115
-
842.75
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
2275
-
90.1
Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).
630
-
10.7
Supplying and stacking at site.
-
-
-
90 mm to 45 mm size stone aggregate
585
-
1267.3
63 mm to 45 mm size stone aggregate
435
-
1374.1
53 mm to 22.4 mm size stone aggregate
435
-
1461.7
Moorum
116
-
613.4
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .
1150
-
449.1
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
410
-
219.5
Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications :On W.B.M. @ 0.75 Kg I sqm
2275
-
31.85
4 cm thick bitumastic sheet with hot bitumen of approved quality, using stone chippings (60% with 12.5 mm nominal size and 40% with 10 mm nominal size) @ 2.60 cum per 100 sqm and coarse sand @ 2.60 cum per 100 sqm of road surface and with bitumen @ 56 kg/cum of stone chippings and @ 128 kg/cum of sand over a tack coat with hot straight run bitumen, including consolidation with road roller of 8 to 10 tonne etc. complete. (tack coat to be paid separately) :With paving asphalt grade VG - 30 with no solvent
2275
-
294.45
Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge.50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.50% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.
175
-
5017.5
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
2000
-
515.2
Providing and fixing M. S. tree guard 45 cm square in plan, height 1.20 metre above ground level and 0.40 metre below ground level. The vertical members shall consist of four nos. angle iron of size 25x25x3 mm, 1.6 m long, one at each corner and 8 nos flat iron of size 25x3 mm, 1.2 m long. The vertical members shall be welded to 4 nos. 25x6 mm M. S. flats placed horizontally around the vertical member of the cage. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD/ PWD/ any other approved name. The tree guard shall be fixed to the ground by making suitable holes and by embedding four corners leg in the ground, including refilling the earth, compaction etc. complete. The tree guard shall be painted with two or more coats of synthetic enamel paint of approved brand and manufacture over a coat of primer, complete in all respect
30
-
1426.95
Supplying of U-PVC pipes (working pressure 4 kg / cm2) Single socketed pipe 75 mm dia
51
-
60.35
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device(handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.
32
-
3054.4
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
86
-
2972.7
Providing and fixingSink mixer with regular Swinging spout (wall mounted model) with connecting legs& wall flange(Jaguar make or euivelent)Model LYR-38309) complete in all respect as per EIC.
32
-
3517.6
Providing and fixing 100 mm CP grating for gully trap
366
-
72.35
Providing and fixing Corner glas shelf (with bracket) jaguar make or equivelent (ACN-1173)
118
-
1234.85
Providing and fixing Towel rack 600 mm longwithout lower Hanger s butwith 3 hooks (Jaguar make or equivelent)(ACN-1181FHN)
86
-
2690.6
Providing and fixing table top Basin, size485x370x150 mm (Jaguar make or equivelent)(SLS-WHT-6901) with single lever Basin mixerwithout popup waste with 450 mm long Braided Hoses (Jaguar make or equivelent)(KUP-35011BPM)and with waste coupling 32 mmsize Half Thread with 80 mm height (Jaguarmake or equivelent)ALD_709) complete in all respect as per EIC
32
-
11380.1
Providing and fixing Hand shower of Jaguar make or equivelent(ALD565)
86
-
1080.88
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
86
-
1725.1
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
42
-
2465.7
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
150
-
783.75
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 250 mm
32
-
3373.85
Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC. waste fittings complete. Semi rigid pipe
32 mm dia
182
-
69.95
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
128
-
712.6
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm
32
-
1088.7
Providing and fixing 600x120x5mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
128
-
497.1
Providing and fixing soil, waste and vent pipes :100 mm diaCentrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
2330.7
-
717.95
Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements. Weighing not less than 106 gms.
182
-
96.35
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
202
-
172.15
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88mm, weighing not less than 190 gms
118
-
383.7
Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :100x100x100x100 mmSand cast iron S&S as per IS - 1729
54
-
531.2
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100x100x100 mmSand cast iron S&S as per IS - 1729
35
-
377
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm diaSand cast iron S&S as per IS - 1729
95
-
266.9
Providing and fixing terminal guard :100 mmSand cast iron S&S as per IS - 1729
54
-
195.85
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outletSand Cast Iron S&S as per IS: 1729
366
-
794.3
Providing lead caulked joints to sand cast iron rain water pipes and fittings :100 mm dia. Pipe
1269
-
271.9
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank
75000
-
6.25
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti- termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
3340
-
131.9
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
6012
-
155.9
Providing and fixing Chlorinated Polyvinyl Chloride (cPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work etc.
-
-
-
20 mm nominal outer dia .Pipes.
1260
-
264.75
25 mm nominal outer dia .Pipes.
1216
-
305.65
Providing cPVC pipe including all UPVC plain / brass threaded fittings. This includes jointing of pipes and fittings with one step UPVC solvent cement and testing of joints complete as per direction of EIC (work exposed on wall).
-
-
-
25 mm dia. nominal bore
730
-
197.15
40 mm dia. nominal bore
800
-
346.4
50 mm dia. nominal bore
1268.33
-
483.1
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK
-
-
-
50 mm nominal outer dia Pipes
100
-
418.75
75 mm nominal outer dia Pipes
495
-
1022.65
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete.50 to 80 mm nominal bore
10
-
717.9
Earth work in excavation in all kins of soil/silt all operation mechenically with all lifts complete as per instruction of EIC.Lead upto 3.00KM
8000
-
51.77
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :
-
-
-
50mm
10
-
2206.85
80mm
10
-
3310.28
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work
-
-
-
50 mm dia. nominal bore
800
-
298.35
65 mm dia. nominal bore
-
-
-
80 mm dia. nominal bore
987.5
-
495.75
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
25 mm nominal bore
96
-
332.45
32 mm nominal bore.
-
-
-
40 mm nominal bore
-
-
-
50 mm nominal bore
15
-
580.3
65 mm nominal bore
-
-
-
80 mm nominal bore
15
-
1476.25
Providing and fixing gun metal non- return valve of approved quality (screwed end) :
-
-
-
80 mm nominal bore
-
-
-
Horizontal
-
-
-
Providing and fixing uplasticised PVC connection pipe with brass unions: 45 cm length
15 mm nominal bore
198
-
60.9
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter
118
-
57.95
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia
118
-
3621.35
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore.
162
-
315.3
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore.
125
-
461.35
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 15mm nominal bore
610
-
402.4
Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof.
-
-
-
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter
225
-
196.25
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter
225
-
294.15
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :
-
-
-
100 mm diameter PVC. pipe
225
-
269.1
150 mm diameter PVC. pipe
225
-
436.1
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
16
-
7373.15
Extra for depth for manholes :Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
-
5016.9
Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :1.68 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conform- ing to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 ce- ment : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
18
-
14506.5
Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
18
-
5585.85
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
375
-
225.45
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :300 mm dia. R.C.C. pipe
375
-
455.65
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :150 mm dia. R.C.C. pipe
100
-
312.7
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : 20
150
-
223.45
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
-
-
-
For pipes 100 to 250 mm diameter
8
-
378.2
For pipes 250 to 300 mm diameter
6
-
441.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
3342.13
-
331.8
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
1799.65
-
388.4
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.5 mm thickness
638.8
-
833.9
Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beading
321.3
-
1167.95
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry
650.13
-
276.65
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade
of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand): 25 mm thick
267.46
-
1062.8
PART B - Electrification Work
-
-
-
Wiring of light point/ fan point / exhaust fan point/ call bell point / with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface /recessed mediun class PVC conduit with Piano type switch phenolic laminated sheet suitable size , ms box and earthing pint with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc as required.
1296
-
478.63
wiring of circuit sub/ main wiring alongwith earth wire with the following size of FRLS for PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required 2 X 2.5 sq mm + 1 X 2.5 sq mm earth wire.
2475
-
114.84
wiring for curcuit /sub main wiring alongwith earth wire with the following size of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required. 2 X 4 sq mm + 1X 4 sq mm earth wire.
2770
-
140.82
Wiring for curcuit /sub main wiring alongwith earth wire with the following size of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required. 2 X 6 sq mm + 1X 6 sq mm earth wire.
402
-
190.28
wiring for curcuit /sub main wiring alongwith earth wire with the following size of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required. 2 X 10 sq mm + 1X 6 sq mm earth wire.
414
-
250.63
wiring for curcuit /sub main wiring alongwith earth wire with the following size of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required. 2 X 16 sq mm + 1X 6 sq mm earth wire.
64
-
341.99
Wiring for twin control light point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit two way piano type swith, phenolic laminated sheet suitable size , ms box and earthing pint with 1.5 sq mmFRLS PVC insulated copper conductor single core cable etc as required.
23.5
-
602.68
proving and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal in existing cubical panel including drilling holes in cubical panel making connection etc as required.
8
-
4567.48
Supply installation testing and commissioning of following capacity compact type bus trunking rising mains for use of 3 phase 4 wire 415 volts 50 Hz ac made with 1.6 mm thick sheet steel enclosure (IP 54) duly powder coated with provision of MCCB ( but without MCCB ) complete etc as required ( for item no. 8). 125 Amp , 15 KA for 1 sec.
8
-
3873.43
wiring of 3 pin 5/6 Amp plug point with 1.5 sq mm PVC insulated copper conductor including providing and fixing of 3 pin 5/6 amp socket with switch on same switch board Make: Kalinga, Finolex, Arkeylite
492
-
127
Supply of 15 Amp flush type switch on existing switch board including connection etc as required. Make: Kinjal, Arkeylite, Anchor
364
-
44
Fixing of 15 Amp flush type switch on existing switch board including connection etc as required. ( labour cost only)
364
-
10
Supply of 5 pin 15 Amp flush type socket on existing switch board including connection etc as required. ISI marked Make: Kinjal, Arkeylite, Anchor
364
-
44
Fixing of 5 pin 15 Amp flush type socket on existing switch board including connection etc as required. ISI marked ( labour cost only)
342
-
10
Supply of TW board with laminated backelite sunmica sheet (8"X 6"x2") ( material cost)
343
-
35
Fixing of TW board with laminated backelite sunmica sheet (8"X 6"x2") ( labour cost)
343
-
10
Supply of angular baten holder ISI marked make : Kinjal, arkeylite, anchor etc as required ( material cost)
416
-
26
Fixing of angular baten holder ISI marked make : Kinjal, arkeylite, anchor etc as required ( labour cost)
416
-
10
Supply of MCB protected socket 16 Amps MCB Havells/ Anchor etc as required.
128
-
559.32
Fixing of MCB protected socket with 16 Amps MCB.
128
-
55.93
Supply of 16 amp or 32 amp single pole MCB C series confirming to IS/ IES 60898-1, 240/415 volts, 50 Hz for inductive load. Make: EATON, Havells, Standerds/ MDS/ABB ( material cost)
192
-
155
Fixing of 16 amp or 32 amp single pole MCB in existing DB including connection etc as required ( labour cost)
192
-
20
Supply of 40 amps 250 volts double pole RCCB in existing DB as required. Make: EATON, Havells, Standerds/ MDS/ABB ( material cost)
32
-
1650
Fixing of 40 amps 250 volts double pole RCCB in existing DB as required. ( labour cost)
32
-
125
Supply of 40 amps SPN MCB 240/ 415 V , 50 Hz, IS/ IES 60898-1, Make: EATON, Havells, Standerds/ MDS/ABB ( material cost)
64
-
355.08
Fixing of 40 amps SPN MCB 240 / 415 V , including connection etc as required ( labour cost only)
64
-
35.51
Supply of SPN MCB 63 amps, 240 / 415 V , 50 Hz, IS/ IES 60898-1, Make: EATON, Havells, Standerds/ MDS/ABB ( material cost)
64
-
978.81
Fixing of SPN MCB 63 amps ,240 / 415 V , including connection etc as required ( labour cost only)
64
-
97.88
Supply of 63 amps RCCB double pole, 240 / 415 V , 50 Hz, 300mA IS/ IES 60898-1, on existing D.B. Make: EATON, Havells, Standerds/ MDS/ABB ( material cost)
32
-
3911.02
Fixing of 63 amps RCCB double pole, 240 / 415 V , 50 Hz, 300mA IS/ IES 60898-1, on existing D.B. including connection etc ( labour cost only)
32
-
391.1
Supply of 8 way sheet enclosure phospetised powder painted with bus bar neutral linked earth bar DIN rail. Make: EATON, Havells, Standerds/ MDS/ABB ( material cost only)
76
-
414.41
Fixing of 8 way sheet enclosure ( labour cost only)
76
-
41.44
Supply of 12 way sheet enclosurephospetised powder painted with bus bar neutral linked earth bar DIN rail. Make: EATON, Havells, Standerds/ MDS/ABB ( material cost only)
52
-
780
Fixing of 12 way sheet enclosure ( labour cost only)
52
-
85
Supply of exhaust fan 300 mm make: CG/ Havells / Bajaj ( material cost only)
150
-
1652.54
Fixing of exhaust fan 300 mm ( labour cost only)
150
-
165.25
Earthing with earth pit as per is specifications including connction with system.
8
-
3500
Supply of ceiling fan 1200 mm sweep. Make : Philips, Bajaj, crompton greaves, Havells , 240 volts ac (material cost only)
192
-
2067.8
Fixing of ceiling fan 1200 mm sweep. (labour cost only)
192
-
206.78
Supply of LED tubelite 18/20 watts with 240 volts fittings. Make: Philips, Bajaj . Crompton greaves, Surya. (material cost only)
526
-
168.64
Fixing of LED tubelite 18/20 watts with 240 volts fittings. (labour cost only)
526
-
16.86
Supply of Ding Dong call bell ( material cost only)
32
-
92.32
Fixing of Ding Dong call bell ( labour cost only)
32
-
9.23
Total impact of GST for the purpose of CTC
1
-
22922031.37
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements