National Law Institute University Tender

Buy Back of existing Solar Water Heating System of FPC Model of capacity 100 LPD

Supply, installation, testing and commissioning of ball valve cpvc high or low pressure with plastic floats inclusive of all necessary required material, labor for mentioned below size. 40.00 mm OD

Note:- 1. AMC Cost will not be used for deciding the lowest bidder. 2. AMC is optional item and may be used only if the rates are found reasonable after negotiation.

Supply, installation, testing and commissioning of evacuated tube collectors solar water heating system having water circulation natural thermo syphon suitable for inlet water with chloride hardness up to 600 ppm & TDS up to 1000 ppm comprising of evacuated tube collectors with double walled vacuum tube made from hard borosilicate glass able to resist impact from hail stone up to 30 mm in diameter, of length 1800mm having ID/OD 48/58mm, thickness 1.6mm.heavy duty HR black CGO-4 steel of 2 mm thick horizontal cylindrical hot water tank with dished end capsule shape including access doors having PUF/rock wool insulation density 42 Kg/cu. mt., 50mm thick having nonstick lining inside the tank and UV stabilized polyester precoated G.I outer cover stand assembly for tank having polyester powder coated G.I folded angle and electrical backup up 2 kW, Heat loss 0.70 W/(m2c), The system should be as per latest specifications of IREDA/BIS/MNRE norms and valid test reports issued by the authorized test centres confirming to MNRE guidelines for following capacities:- Rated capacity 100 LPD, storage tank 100 Ltr

Supply, installation, testing and commissioning of evacuated tube collectors solar water heating system having water circulation natural thermo syphon suitable for inlet water with chloride hardness up to 600 ppm & TDS up to 1000 ppm comprising of evacuated tube collectors with double walled vacuum tube made from hard borosilicate glass able to resist impact from hail stone up to 30 mm in diameter, of length 1800mm having ID/OD 48/58mm, thickness 1.6mm.heavy duty HR black CGO-4 steel of 2 mm thick horizontal cylindrical hot water tank with dished end capsule shape including access doors having PUF/rock wool insulation density 42 Kg/cu. mt., 50mm thick having nonstick lining inside the tank and UV stabilized polyester precoated G.I outer cover stand assembly for tank having polyester powder coated G.I folded angle and electrical backup up 2 kW, Heat loss 0.70 W/(m2c), The system should be as per latest specifications of IREDA/BIS/MNRE norms and valid test reports issued by the authorized test centres confirming to MNRE guidelines for following capacities:- Rated capacity 500 LPD, storage tank 500 Ltr

Buy Back of existing Solar Water Heating System of FPC Model of capacity 500 LPD

Total