MP State Livestock And Poultry Development Corporation Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
MP State Livestock And Poultry Development Corporation - MPLPDC Tender
Building Construction
Coronavirus COVID 19
Eprocure
Opening Date4 Dec 2019
Closing Date26 Dec 2019
Tender Amount₹ 1,59,95,000
Costs
EMD
₹ 1,60,000Document Cost
₹ 12,500Tender Fee
₹ 1,534
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_MLPDC_67490_1Bid Award Id
ViewTender No
137/129/SexedSemen/RGM/2019-20Tender Authority
MP State Livestock And Poultry Development Corporation ViewPurchaser Address
-Website
http://http://www.mplivestock.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed.. Ordinary rock
200.57
-
182.7
Extra for every additional lift of 1.5 m or part thereof in excavation. (No extra lift is payable if work is done by mechanical means). Ordinary or hard rock.
109.4
-
47.7
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : With 40mm nominal size graded stone aggregate. Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate (M 10)
59.86
-
3427.2
Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : M 20 –Grade Concrete
65.44
-
4581.9
M 15 –Grade Concrete
45.09
-
4166.1
Reinforced cement concrete work (with 20mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and up to floor two level excluding cost of centering, shuttering, finishing and reinforcement : M 20 –Grade Concrete
46.8
-
4681.8
Reinforced cement concrete work (with 20mm nominal size graded stone aggregate) in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level and up to floor two level excluding the cost of centering, shuttering, finishing and reinforcement in concrete grade. M 20 –Grade Concrete
124.33
-
4755.6
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire up to floor two level including all wastage etc. complete. Thermo- Mechanically Treated bars. (TMT) (Fe-500)
37894.62
-
60
Centering and shuttering including strutting, propping etc. and removal of form for : (A) Foundations, footings, bases of columns, etc. for concrete up to plinth level.
299.12
-
156.6
Walls (any thickness) including attached pilasters butteresses, plinth beams and string courses etc.up to plinth level.
309.77
-
240.3
Suspended floors, roofs, landings, balconies and access platform.
655.94
-
237.6
Lintels, beams, girders, bressumers and cantilevers.
295.93
-
204.3
Columns, Pillars, Piers, Abutments, Posts and Struts.
221.04
-
320.4
Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
-
-
64.8
Supplying and filling in plinth with hard muram/hard copra under floors including watering ramming cosolidating in layers not exceeding 20cm in depth and dressing complete.
428.83
-
270
Supplying and filling in plinth with crusher stone dust / coarse sand under floors including, watering, ramming consolidating in layers not exceeding 20cm in depth and dressing complete
65.34
-
604.8
Preconstruction antitermite treatment to the building under construction by providing Stage 1: Treating the bottom and the sides (upto 30cm hight of the excavated trench @ 5 litter per sqm of the surface area. Stage 2: After masonry/RCC work, the backfill in the immdiate contact with the foundation structure treatment @ 7.5 litter per sqm. of the vertical surface of the substructure for each side. Stage 3: surface treatment by spreading emulsion over the plinth area before laying the base concrete under floors @ 5.0 litres/Sqm. Stage 4: Pumping the emulsion in plinth masonry on filling side at floor junction @ 7.5 litres/Sqm. Stage 5: Pumping the emulsion from outer side of the plinth below ground alround the masonry @ 5.0 litres/Sqm as per I.S. 8944 Emulsion. (1Chlorpyrifos: 19 water) with five years service guarantee (Measurements to be taken for plinth area) Note – Treatment should start when foundation trenches and pits are ready to take bed concrete or leveling course in foundations. Laying of bed concrete should start when the chemical emulsion has been absorbed by the soil and the surface is reasonably dry. Treatment should not be carried out when it is raining or when soil is wet with rain or subsoil water. This also applies to filled up soil within the plinth area before laying the subgrade for flooring.
450.9
-
122.4
Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor II level in : having 75 kg / cm2 average compressive strength. Cement mortar 1:6 (1 cement : 6 sand)
73.21
-
4586.4
Half brick masonry with fly ash lime Gypsum bricks (FALG bricks) conforming to IS : 12894, in super structure above plinth and upto floor two level. having 75 kg/cm2 average compressive strength. Cement mortar 1 : 4 (1 cement : 4 sand)
177.41
-
574.2
Extra for providing and placing in position 2 Nos. 8mm dia. M.S. bars at every third course of half brick masonry.
177.41
-
114.3
6 mm cement plaster of mix : 1:3 (1 cement : 3 sand)
460.18
-
86.4
12mm thick plaster 1:4 (1 cement : 4 sand)
512.16
-
110.7
20 mm cement plaster of mix : 1:4 (1 cement : 4 sand)
748.74
-
157.5
Providing and fixing chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails on vertical and horizontal junctions of RCC and brick wall including scaffolding and all lead and lift etc. complete before plastering upt 10 meter height.
59.12
-
55.8
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, Like birla white /JK white or equivalent, over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete.
-
-
66.6
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work
-
-
57.6
Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).
-
-
78.3
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
47.52
-
47.7
Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded (wherever required) and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in flooring laid over 20mm thick base of cement mortar 1:4 (1cement : 4 sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. All Shades /colour other than black Area of slab less than 0.50 sqm.
405.235
-
3238.2
Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. samples approved by Engineer-in-charge. Granite of any colour and shade
4.28
-
2989.8
Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
3
-
298.8
Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness 9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigments etc., complete.
7.61
-
897.3
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (having thickness 6 to 7mm) of approved make in all Colours shades, such as burgundy, Bottle green, Black of size 300x450mm or more in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
632.66
-
843.3
Providing and laying vitrified floor tiles in different sizes with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600x9-10 mm (Ammendment )
10.53
-
991.8
Providing and laying Vitrified tiles in different sizes, with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours and shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 sand), including grouting the joint with white cement and matching pigments etc. complete. Size of Tile 600x600x9-10 mm (Ammendment )
1.86
-
987.3
Providing and laying factory made coloured chamfered edge Cement Concrete paver blocks of required strength, thickness and size/shape, made by table vibratory method using PU mould, laid in required colour and pattern over 50mm thick compacted bed of stone dust, compacting and proper embedding/laying of inter locking paver blocks into the bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including locking edges with M 15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer's specifications and direction of Engineerin- Charge. 80mm thick C.C. paver block of M-35 grade with approved colour, design and pattern.
201.6
-
756
Providing and fixing pressed steel door frames conforming to IS: 4351 manufactured from commercial mild steel sheet including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60 mm pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges, 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified filling the frame with Cement Concrete 1:3:6 at site before fixing (cost of concrete to be paid separately) and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: (a) Profile C of 1.60mm thick single rebate of size 100mmx50mm, (Fixing with adjustable lugs with split end tail to each jamb.)
10.2
-
387.9
Profile E of 1.60mm thick double rebate of size 115mmx50mm (Fixing with adjustable lugs with split end tail to each jamb.)
6
-
424.85
Providing and fixing 16mm thick gang saw cut mirror polished premoulded and prepolished machine cut Granite of approved shade, colour and texture of Granite Door frame. in cement mortar 1:3 (1 cement :3 sand) including pointing with an admixture of pigment to match the shade including fixing of granite stone door frame with epoxy resin based adhesive including secured to the backing by means of cramps, drilling of hole with rawl plugs and screws 75mm long cleaning etc. complete. Including rubbing, curing, moulding and polishing edges to give high glossy finish and drilling of hole for fixing stainless steel hings, aldrop, towerbolt etc complete at all levels as per instruction of Engineer-in-charge. (a) Granit Door frame for 100mm thick wall Thickness.
35.7
-
1009.8
Granit Door frame for 200mm thick wall Thickness.
6
-
1512
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of such as duro board, century or equivelant make. (a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
3.78
-
3482.1
30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
13.23
-
3294
24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).
3.78
-
2599.2
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood 50x12 mm
40.65
-
91.8
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
1188
-
81.9
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm
8
-
141.3
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 200x10 mm
9
-
54
Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete : 250x20x6 mm
8
-
60.3
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm (250x20x6 mm)
18
-
24.3
Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality).
1
-
738
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete.
3
-
1067.4
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper
6
-
77.4
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : A) For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron)
624.86
-
339.3
For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)
218.16
-
382.5
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) : (a) With float glass panes of 5.50 mm thickness
76.02
-
838.8
With float glass panes of 8 mm thickness
202.425
-
1162.8
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. n gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
1350
-
76.59
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around.
450.9
-
304.2
40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) Light shade pigment with ordinary cement.
450.9
-
449.1
Making plinth protection 50mm thick of cement concrete grade M10 over 75mm bed of dry metal ballast 40mm nominal size well rammed and consolidated and filled with sand including finishing the top smooth (with 20mm nominal size graded stone aggregate.)
96.4
-
315.9
Providing and Applying Roto Wall finishing system being a dispersion of inorganic fillers, calcite, pure silica, quartz and broad spectrum fungicides stabilized by an acrylic co-polymer, to be applied by means of customized trowels (one for incorporating material on base and spreading and other for finishing) in single coat with a coating thickness of 2.0-2-2.5mm on a cured smooth level plaster without keying, by the approved applicator of manufacturer, of the approved shade as per directions for usage all inclusive including primer coat on the base.
505.84
-
291.6
Providing and fixing of Mineral Fibre Acoustical Suspended Ceiling System with 16mm thick tegular edge tiles of size 595x595mm as approved by Engineer-in-charge, in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gsm/sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6 x mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications drawings and as directed by Engineer-in-charge.
The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥83%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 and7) in module size of 600 x 600 x 16mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38 - 41%. The Tile and Grid system used together should carry a 15 year warranty.
333.82
-
1658.7
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm or both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board.
125.18
-
828
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).
2.4
-
520.2
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
1.2
-
438.3
Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge:In cement mortar
6
-
612
Dismantling tile/ Kota stone/ Marble / Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
108
-
15.3
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
108
-
57.6
Dismantling steel work in built up sections with span upto 10 meter and hieght 5 meter in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead.
540
-
1.17
Dismantling steel work manually/ by mechanical means in built up sections with span upto 10 meter and hieght 5 meter without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge.
540
-
0.81
Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one metre or part thereof beyond 10 metres
540
-
0.18
Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof beyond 5 metres.
540
-
0.18
SANITARY WORKS:- Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
6000
-
6.3
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc., (a) 15 mm nominal outer dia .Pipes.
25
-
186.3
20 mm nominal outer dia .Pipes.
35
-
210.6
25 mm nominal outer dia .Pipes.
100
-
259.2
32 mm nominal outer dia .Pipes.
25
-
324
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge.External work. (a) 25 mm nominal outer dia .Pipes.
90
-
166.5
32 mm nominal outer dia .Pipes.
50
-
214.2
50 mm nominal outer dia .Pipes.
50
-
448.2
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work : (a) 25 mm dia. nominal bore
25
-
236.7
50 mm dia. nominal bore
100
-
442.8
Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (a) 75 mm diameter (minimum wall thickness 3.2mm)
25
-
122.4
110 mm diameter (minimum wall thickness 3.2mm)
50
-
214.2
Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (a) Coupler (i) 75 mm
10
-
105.3
110 mm
15
-
138.6
Single pushfit Coupler (i) 75 mm
10
-
126
110 mm
15
-
175.5
Single tee with door (i) 75x75x75 mm
10
-
197.1
110x110x110 mm
15
-
311.4
Single tee without door (i) 75x75x75 mm
10
-
180.9
110x110x110 mm
15
-
239.4
Bend 87.50 (i) 75 mm bend
6
-
105.3
110 mm bend
10
-
154.8
Providing and fixing Unplasticised -PVC pipe clips of approved design to Unplasticised - PVC soil and waste pipes by means of bombay nail of required length including and making good the wall etc. complete. (a) 75 mm
8
-
29.7
110 mm
20
-
45
Providing and fixing uPVC trap of self cleaning design complet. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet
12
-
465.3
Providing and fixing white vitreous china extended Wall Mounted Anti germ Fluoro-Polymer Coated water closet Size 350 X 360 X 545mm of approved shape (Wall Hung W. C. pan size 350 X 360 X 545mm) with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propeline) made 80 mm thick consealed flushing cistern, flushing capcity 3 litre/6 litre, with all fittings and fixures complete including cutting and making good the wall and floors wherever required : Anti germ Fluoro-Polymer Coated (neno coating) Wall hung water closet Size 350 X 360 X 545mm with solid poly propelyne made soft closing seat cover
2
-
18936
Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated urinal (Inbuilt spreaders, Inbuilt Bottle trape and inbuilt ceramic Waste coupling) Size 670 X 330 X325 mm with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock complete including painting of fittings and brakets, cutting and making good the wall and floors wherever required : White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 670 X 330 X325 mm with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock.
1
-
18953.1
Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin size 160x580x450mm with C.I. Brakets, 15 mm C. P. wall mounted pressmatic pillar cock auto closing system (decol technology), 15mm quarter turn angular stop cock, 32 mm C.P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixures complete including Painting of fittings and cutting and making good the wall and floors wherever required : White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 160x580x450 mm with basin mounted pressmatic pillar cock auto closing system (decol technology).
2
-
12168
Providing and fixing CP brass bottle trap of approved quality and make for sink and wash basin.
2
-
767.7
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
2
-
593.1
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing : Rectangular shape 1500x450 mm
2
-
1179.9
Providing and fixing in position best indian C. P. Brass made (0.3 micron Chrom and 10 micron Nickel plated) Toilet paper holder with Flap .
2
-
1458
Providing and fixing in position best indian C. P. Brass made (0.3 micron Chrom and 10 micron Nickel plated) Single Towel Rail 600 mm long .
2
-
2268
Providing and fixing in position best indian C. P. Brass made (0.3 micron Chrom and 10 micron Nickel plated) Soap Dish Holder .
2
-
945
Providing and fixing C.P. brass grating of approved quality and make conforming to IS:specification. 100 mm dia.
12
-
66.6
Providing and fixing in position best indian Auto Closing Bib Cock (with DECOL cartredge) for comon area use.
8
-
2160
Providing and fixing in position best indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating. 10 micron and chrome plating 0.3 micron, quarter turn)Angular stop cock.
16
-
1080
Providing and fixing in position best indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn)Consealed stop cock.
8
-
1458
Providing and fixing in position best indian ( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn)Wall Mixer with 115mm bend.
2
-
4752
Providing and fixing in position best indian shower rose 150mm dia, body and face chrome plated, brass made body, Silicon based Rubit cleaning nozzels.
2
-
3780
Providing and fixing gun metal gate valve with brass lever handle of approved quality. (a) 25 mm nominal bore
4
-
306.9
32 mm nominal bore.
4
-
377.1
50 mm nominal bore
4
-
575.1
Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly. (a) 110 mm diameter OD
50
-
210.6
160 mm diameter OD
150
-
429.3
Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design: (a) 110 mm diameter PVC. Pipe
50
-
518.4
160 mm diameter PVC. Pipe
-
-
633.6
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : 300 mm dia. R.C.C. pipe
10
-
432
Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes ,110 mm diameter (minimum wall thickness 2.2mm)
27
-
214.2
Providing and fixing square-mouth S.W. gully trap class SP1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 180x150 mm size P type (With well burnt bricks )
4
-
1721.7
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay bricks of 25 kg /sqcm compressive strength.
4
-
824.4
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay bricks of 25 kg /sqcm compressive strength.
8
-
4874.4
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With well burnt bricks
10
-
7197.3
Extra for depth for manholes Size 90x80 cm (With well burnt bricks )
2
-
5558.4
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With well burnt bricks
1
-
18548.1
Boring/ driling bore well of required dai perfectly vertical to reciving casing/strainer pipe,by suitable method preccribed in is 2800 (part1) , including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipments tools, plants and machineries required for the job, all complete as per direction of engineer in charge , up to 90 meter depth below ground level 150mm dia
90
-
371.7
Boring/ driling bore well of required dai perfectly vertical to reciving casing/strainer pipe,by suitable method preccribed in is 2800 (part1) , including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipments tools, plants and machineries required for the job, all complete as per direction of engineer in charge , BEYOND 90 meter depth below ground level. 150mm dia
300
-
385.2
SUPPLYING , assembling, lowering anf fixing in vertical position in bore well, unplasticised PVC MEDIUM WELL CASING (CM)pipe of required dia , conforminig to is : 12818, including required hire and labour charges, fitings and acessories etc. all complete, for all depth, as per direction of engineer in charge. 150mm nominal dia (minimum wall thickness 7.5mm)
400
-
380.7
Providing and fixing suiatable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe.removable as per requirement, all complte for borewell of. 150 mm dia
10
-
329.4
Providing and fixing M s clamp of required dia made of 100x 10mm flat to the top of casing/housing pipe of tube well as pe is 2800(part1), including necessary bolts and nuts of required size complete. 150mm clamp
10
-
1016.1
ELECTRICAL :- Point wiring (excluding metallic switch box & sheet but including switches,sockes,lamp,holders,ceiling roses etc) with 1.5 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI Marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit etc. as required as per specification for :- (A) Light Point/Fan Points. a) Short point
30
-
354.6
b) Medium point
42
-
603.9
c) Long point
60
-
974.7
3 Pin 6 Amp socket outlet on Separate Board. a) Medium point
10
-
702
b) Long point
22
-
1072.8
Call Bell / Buzzer Points. (a) Long point
1
-
884.7
Twin Control light points.(a) Long point
1
-
1153.8
Point wiring (excluding metallic switch box & sheet but including switches, sockets) for 3 pin 6 Amp. Socket outlet point with 1.5 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit with required materials as per specification on same board .
20
-
256.5
Wiring for circuit wiring with PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) of ISI marked suitable size etc. as required as per specification (a) 2x2.5 Sq.mm.
160
-
105.3
b) 4x2.5 Sq.mm.
140
-
158.4
c) 6x2.5 Sq.mm.
120
-
202.5
d) 8x2.5 Sq.mm.
40
-
249.3
POWER POINT ;- Point wiring (excluding metallic switch box & sheet ) for 3 Pin 16 Amp. Socket Outlet Point With 4 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in Concealed rigid P.V.C Conduit (HMS) ISI Marked of suitable size etc. with 16 Amp. F.T. Switch & Socket / S.S.Combined 6/16 Amp. of ISI Marked and 4 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit as per specification for (A) On Separate Board (i) Short point
6
-
734.4
Medium Point
8
-
1201.5
Long Point
10
-
1737
Extra Long -I
12
-
2378.7
Extra Long -II
12
-
3075.3
Extra Long -III
14
-
3773.7
Same board switch socket 6/16 Amp
10
-
421.2
Supplying and fixing PVC conduit ISI marked along with the accessories on surface etc. as required. PVC. Conduit 20mm (MMS)
200
-
35.1
PVC . Conduit 25 mm (HMS)
200
-
45.9
Supplying and fixing PVC conduit ISI marked along with the accessories in concealed system etc. as required. PVC . Conduit 25 mm (HMS)
50
-
64.8
Supplying and fixing of approved make modular type metal box with modular frame/ base plate and cover plate including fixing in concealed / surface excluding switch,socket etc. as required for:-(i) 1 Or 2 Module
10
-
140.4
3 Module
52
-
187.2
4 Module
10
-
212.4
6 Module
40
-
293.4
8 Module
12
-
360
12 Module
10
-
438.3
16 Module
2
-
478.8
Supplying and drawing single core PVC insulated cable FR with copper multi strand conductor ISI marked in existing rigid PVC Casing-N-Capping / conduit in surface or concealed as per specification. 1.5 Sq mm cable, ( 3 X 1.5 sq mm)
100
-
45.9
Wiring for sub-mains with PVC insulated cable FR with copper multi strand conductor ISI marked in recessed / concealed rigid PVC conduit (HMS) ISI marked of suitable size(Conduit included) including 2mm thick accessories, connection etc ,as required as per specification. 4 WIRE SUB-MAIN 16.0 sq mm cable in 32 mm conduit
100
-
564.3
MCB, DB:- Supplying of ISI Marked and approved make of Moulded Case Circuit Breaker (MCCB) suitable for 3 phase,3 pole, 50 Hz, 415 Volts, AC supply with respective interrupting capacity (KA) at 415 Volts cited against their range standard conforming to IS – 8828. MCCB with Breaking Capacity 25 KA at 415 V, Current Rating -200 Amps & 80% -100% adjustable
4
-
11897.1
Supplying of ISI Marked and accepted standard of Miniature Circuit Breaker (MCB) of 'C' series suitable for 240/415 Volts, 50 Cycle , 10 kA Value AC supply confirming to IS : 8828 : 1996, IEC : 60898 :2002 but without enclosures :- A-SINGLE POLE (SP), 6 Amp to 32 Amp Rating
136
-
184.5
Miniature Circuit Breaker (MCB) of 'C' series suitable for 240/415 Volts, 50 Cycle , 10 kA Value AC supply confirming to IS : 8828 : 1996, IEC : 60898 :2002 but without enclosures :- FOR TRIPLE POLE & NEUTRAL(TPN), 50 Amp to 63 Amp Rating
4
-
1829.7
Supplying of approved make, powder coated Metal Double Door Vertical TPN MCB DB IP 43 protection with provision for MCCB up to 160A TP/ FP 36kA as incomer and space for SP/TP MCBs as outgoing (without MCCB / MCBs) inclusive of bus bar & connections etc. 8 way without MCCB
4
-
9733.5
Supplying & fixing of ISI marked Industrial type metal plug socket D.B.s (without MCBs) for TPN encloser three pole and earth metal plug and socket including space incorporating TP MCB complete as per specification as required. 20 Amps
14
-
2106.9
Supplying and installing of RCBOs (Residual current circuit breaker with overload and short circuit protection) ISI marked complete as per I.S. standard confirming to IEC:61009-2-1 & IS:12640-2:2001,240/415V 50 Hz with 10 kA short circuit withstand capacity for earth leakage, overload & short circuit protection including connection in existing enclosure in approved manner as per specification. DP(4 module), 2 pole 63 Amps, 100 mA sensitivity
4
-
4310.1
Fixing of MCB /MCCB/ Isolator in sheet steel enclosure as required as per accepted practice, including mounting on busbar and cable connection etc. complete (Labour only ) (A) MCB / Isolator SP/DP
140
-
9.9
MCB /MCCB Isolator TP /TPN/FP
8
-
19.8
Labour charges for fixing sheet steel enclosures, MCB DB flush mounting type, as per accepted practice, duly embedded and end plate completely flushed in wall, cable connection etc.complete :- FOR S.No :- 27.8.4 & 27.8.5 ; 27.9.2 to 27.9.3 ; 27.10.1 to 27.10.3 & 27.11.1 to 27.11.3
4
-
243.9
FIXTURE :- Supplying and fixing as per specification Call bell / buzzer of approved make with necessary materials complete. Ding Dong bell
1
-
96.3
Supplying and fixing of approved make step type Modular electronic Fan regulator including connection etc. as required on existing board 100 Watt (1 Module)
6
-
516.6
Supplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts including connections with all necessary material complete of approved as required confirming to IS :374/1979 with up to date ammendments. Ceiling Fan (5 star & ISI)-1200 mm Sweep
120
-
2048.4
Supplying, erecting and testing of approved make Exhaust Fan heavy duty with mounting frame, blades AC 230-250 complete connection and including, frame bolt/ Anchor hole fastners etc. complete finished of approved as required. 300mm sweep 900 RPM
4
-
2626.2
Supplying, fixing & testing of approved make T- 5 lamp channel luminary with epoxy white powder coated CRCA sheet steel housing box type channel with reflector cover including electronic ballast (HF), PF 0.95, THD 30% complete duly wired (with tube rod) as per specification & fixing as below: I) Fixing on wall/Ceiling on PVC plate Anchor fasteners and other necessary materials including connections etc. and as required.
6
-
1054.8
Supply and fixing Led tube rod comprising of LED tube with non integral / integral driver, 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy 80 lm/W. LED driver PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job. 2 Yrs Guarantee certificate from manufacturer. 1 X 18/20/22W, Integral
6
-
1421.1
Supply and fixing of surface mounting type Led light fixture, LED of 1 to 3 W each assembled on single MCPCB, having color temp 6500K & having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy80lm/W. LED driver, PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70. Housing made of CRCA with glare free diffused polycarbonate cover. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer manadatory. i/c connection wire, testing etc. to complete the job. 2 Yrs Guarantee certificate from manufacturer. Led luminiare 2' X 2', 36W , 4-6.5k
112
-
4946.4
Supplying and fixing surface mounting LED down lighter, LED of 1 to 3 W each assembled on single MCPCB, having color temp 6500K & having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy80lm/W. LED driver PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70. Housing made of CRCA powder coated frame with glare free diffused polycarbonate cover. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory. i/c connection wire, testing etc. to complete the job. 2 Yrs Guarantee certificate from manufacturer. 15 W , 180/200mm
4
-
2304.9
Supplying and fixing recessed mounting LED down lighter, LED of 1 to 3 W each assembled on single MCPCB, having color temp 6500K & having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy80lm/W. LED driver PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70. Housing made of CRCA powder coated frame with glare free diffused polycarbonate cover. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer manadatory. i/c connection wire, testing etc. to complete the job. 2 Yrs Guarantee certificate from manufacturer. 12 W, 180/200mm
6
-
1738.8
Supplying, Fixing and Testing of Compact Fluorescent Lamp (CFL) with inbuilt electronic ballast ISI marked BC / ES cap of approved make as required as per specification 15 Watt
4
-
174.6
EARTHING :- Earthing with Copper Earth plate 600mm X 600mm X 3mm thick including accessories and providing masonary encloser in cement mortor, cover plate having locking arrangement on the top and G.I. watering pipe 20mm dia 2.7 Metre long etc. (but without charcoal or coke and salt) complete as required.
4
-
7211.7
Add Extra for using salt and charcoal / coke for G.I. Plate or Copper plate earth electrode as required including excavation & refilling.
4
-
1656.9
Providing & fixing 25mm X 5mm copper strip on surface or recessed for connection etc. as required.
50
-
727.2
Providing and fixing 4.00mm copper wire on surface or in recessed/concealed for loop earthing as required.
50
-
77.4
TELE PHONE:- Supplying and fixing PVC conduit ISI marked along with the accessories in concealed system etc. as required PVC . Conduit 25 mm (HMS)
60
-
64.8
Supplying and drawing following pair of 0.5 mm size solid annealed copper conductor PVC Insulated telephone cable as per DOT Specifications in existing surface / concealed steel / PVC Conduit / Casing-N-Capping as required. 2 Pair
100
-
69.3
Supply, fixing and testing RJ - 11 Telephone Jack Single with
shutter F.T
20
-
51.3
Supply, Installation testing and commissioning RJ - 45 Computer Jack cat 6 with shutter Modular (1Module)
10
-
441.9
Suppling and drawing 4 pair shielded, 0.5 mm PVC.Insulated copper conductor un-armoured Cat-6 computer cable FR in existing surface / concealed ,steel / PVC. Conduit/Casing-Ncapping as required.
100
-
41.4
Supply, Installation testing and commissioning of patch cord as mentioned below :- CAT 6 RJ45 Patch Cord F/UTP 2 Mtr.
10
-
405
Supply, Installation testing and commissioning of 19" Modular telephone Patch Panel 24 - 1 U with RJ 11 connector
10
-
18016.2
Supply, Installation testing and commissioning of wall mounting rack, for computer switches complete as mentioned below :- 12U cabinet 638X600X500, wall mounting with power supply and Fan etc
1
-
15738.3
CABLE :- Supply of XLPE Insulated power cable (confirming IS-7098 Part-I ) 1100 Volt grade, 1 core /2 core /3½ core/4 core ISI MARKED with Alu. Stranded /solid conductor, 4 CORE ARMOURED. 150 Sq.mm.
100
-
1012.5
Laying and fixing of one number PVC insulated and PVC sheathed aluminium conductor cable of 1.1kV grade of size not exceeding 25 Sq.mm on surface etc. as required.
50
-
34.2
Laying and fixing of one number PVC insulated and PVC sheathed aluminium conductor cable of 1.1kV grade of size exceeding 25 Sq.mm but not exceeding 120 Sq.mm on surface etc. as required.
100
-
50.4
Supplying, fixing, testing & commissioning wall / floor mounted LT Panel primer coated with powder coated paint & provided with required gasket for dust / vermin proof with degree of protection IP42 suitable for 415V 3 phase, 50 Hz,4 wire system fabricated out of CRCA sheet up to 2 mm thick (1.6 mm for doors) duly compartmentalized for incomer, bus section, outgoings, cable alleys & CT, PT Ampere Meter, Volt Meter, selector switches, Frequency Meter, phase indicating lamps, Energy Meter complete including cost of busbar supports, detachable cable gland plates, 2 earthing terminals, internal wiring & fixing of separately supplied MCBs, MCCBs , ACB, panel mounted Changeover switch / SFUs, etc. as required but excluding cost of bus bar strips, Ampere Meter, Volt Meter, Selector
switch as per approved design & specification
180
-
162
Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc.as required as per spececification. (a) Digital Ampere Meter with CTs with selector switch
1
-
1755
Digital Volt Meter with selector switch & HRC fuse
1
-
1890
Copper Bus bar strips with PVC sleeves
12
-
585
LED lamp indicator
3
-
180
Supplying of ISI Marked and approved make of Moulded Case Circuit Breaker (MCCB) suitable for 3 phase,3 pole, 50 Hz, 415 Volts, AC supply with respective interrupting capacity (KA) at 415 Volts cited against their range standard conforming to IS – 8828 (A) MCCB with Breaking Capacity 25 KA at 415 V. (i) Current Rating -25 to100 Amps & 80% -100% adjustable
4
-
5040.9
Supplying of approved make Moulded Case Circuit Breaker (MCCB) without protection release suitable for 3 phase, 3 pole, 50 Hz, 415 Volts, AC supply standard conforming to IS – 8828. (A) MCCB with Breaking Capacity 36 KA at 415 V. (i) MCCB Swtch Disconnector Rating -200 Amps 3 Pole without protection Release
1
-
10655.1
Supplying & Installation of required capacity of single phase, 50 Hz,220V, deep well submersible pump Stainless Steel body, as per IS of approved Make, suitable for 4"/6 " tube well with Control Panel Starter suitable for Submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications but excluding Pipe, SS/Nylon wire rope and connection cable. 3 H.P. with 10 to 12 stages, Head Mt 84-23, Discharge
1
-
31660
Supplying & Installation of required capacity of Three phase, 50 Hz,415V, deep well submersible pump Steel body, as per IS of approved Make, suitable for 6 " tube well with Control Panel Starter suitable for Submersible pump with dry run protection, single phase preventer, connections, including clamps, bore cap etc. as required as per specifications but excluding Pipe and connection cable. 5 H.P. with 8 to 9 stages, Head Mt 83-32, Discharge LPM60-270
1
-
42638
Supplying and fixing street light with high power LED of 1 to 3 W each assembled on single MCPCB, system lumens SOR ELECTRICAL 2014/CHAPTER-31
Page 60 of 114 output with efficacy90 lm/W. luminiare having color temp6500K & 50000 burning hrs life with minimum @ L 70,The colour rendering index of LED light should be more than 70. Luminiare comprises of driver, PF 0.95 & surge protection 3KV. Housing made of pressure die cast aluminium with heat resistant flat glass / Lens type, IP65 protection. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer manadatory i/c 50mm.dia G.I. Pipe bracket upto 2 mtr. long in required angle/shape,connection lead, testing etc to complete the job. 2 Yrs Guarantee certificate from manufacturer. 60w
4
-
20326
Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make. 4.0 Sq.mm multi strand
300
-
166.5
6.0 Sq.mm multi strand
300
-
246.5
AC WORK:- Refrigerant Piping, Supply, Installation, testing & commissioning of suction discharge copper pipe line in split Air Conditioning unit 1.0/ 1.5/ 2.0/ 3.0 Tr capacity including brazing, nitrile rubber insulation 6/9mm thick class O etc. complete as reqired.(i) Copper tube 1/2"
120
-
470
Copper tube 5/8""
120
-
559
SPLIT AC (INVERTER MODEL):- Supply installation testing and commissioning of split type wall mounted Air conditioning unit of following capacity including indoor, outdoor unit fitted with inverter based rotary compressor, copper condensor and first charge refrigerant R410A. The condensing unit working range should be capable for providing cooling between +/- 5deg. C to 50 deg. C & heating with in 0 ged. c to 15 deg. C including connection of copper pipe of required size up to 3 mtr. insulation, cordless remote control, auto air swing louvers, wall stand for out door unit, conection copper lead wire, condensed water outlet pipe 2 mtr. complete etc as required Outdoor/ Indoor unit should be of same make (Brand). (i)1.0 TR Star Rating 3 Ster
2
-
43340
1.5 TR Star Rating 3 Ster
4
-
51364
1.8/2.0 TR Star Rating 3 Ster
4
-
65939
CASSAETTE AC:- Supply installation testing and commissioning of split type ceiling cassette slim line/Floor Standing Air conditioning unit of following capacity including indoor, outdoor unit fitted with rotary compressor, copper condensor and first charge refrigerant R410A. / eco friendly green gas only, cordless remote control, auto air swing louvers, conection copper lead wire between outdoor and indoor unit, connection copper lead wire up to 1.5 mtr. exxcluding connection copper pipe of required size, insulation, floor stand for out door unit, condense water outlet complete etc as required Outdoor/ Indoor units should be of same make (Brand). Ceiling Suspended/ Mounted Cassette 4 Way Unit with inbuilt drain pimp & decorative panels. (i) 1.8/2.0 TR Single Phase
3
-
86198
2.4 TR Single Phase
1
-
101281
2.7/3.0 TR Three Phase
4
-
125091
3.4/3.5 TR Three Phase
2
-
141939
AC INSTALLATION:- Insatallation of split type Wall Mounted Air Conditioner indoor, outdoor unit fitted with rotary compressor, copper condensor and first charge refrigerant R410A, including connection of copper pipe and material supplied with complete unit etc as required (Excluding cost of copper pipe)
10
-
1500
AC INSTALLATION:- Insatallation of split type ceiling cassette Air Conditioner unit indoor, outdoor unit fitted with rotary compressor conditioner and first charge refrigerant R410A/ eco friendly green gas only including connection of copper pipe and material supplied with complete unit etc as required (Excluding copper pipe)
10
-
5000
COPPER PIPING :- Supply, installation, testing and commissioning of interconnecting copper refrigerant pipe work ( 19mm /13mm thick) duly insulated with elastomeric nitrile rubber type tubular insulation betbeen indoor & outdoor units as per specifications. And exposed piping should be wrapped with glass woven cloth and lag coating for vapour barries and weather protection. joints shell be covered with nitrile rubber tape of 3mm thick complete as per specification. (i) 38 mm O.D., wall thinkness 1.4mm (insulation-19mm thick)
80
-
1286
22.2 mm O.D., wall thinkness 1.0mm (insulation-19mm thick)
150
-
634
12.7 mm O.D., wall thinkness 0.8mm (insulation-13mm thick)
120
-
446
Drain Piping :- Providing and fixing of CPVC, 6kg/cm2 drain water piping with fittings, support and insulated with 6mm thick closed cell elastomeric nitile rubber insulation complete as per specification. (i) 20mm dia.ID
80
-
118
25mm dia.ID
150
-
135
32mm dia.ID
120
-
186
Control Cabling (i) 4 C X 1.5 sqmm
200
-
59
4 C X 4 sqmm
100
-
137
ROAD WORK:- Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 metres. Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead upto 1000m as per relevent clauses of section-300 of specification
210
-
40.5
Excavation in Ordinary Rock using Hydraulic Excavator and Tippers with disposal upto 1000 metres. Excavation for roadway in ordinary rock with hydraulic excavator including cutting and loading in tippers, transporting to embankment site with in all lifts and lead upto 1000 m, trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections as per relevent clauses of section-300 of specification.
105
-
51.3
Granular Sub-base with Well Graded Material (CBR30 or more) (Table:- 400-1 & Table 400-2) Construction of granular sub-base by providing well graded material like natural sand crushed gravel or crushed stone having CBR 30, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator or plant mix method at OMC, and compacting with vibratory rollers of 80 to 100 kN static weight to achieve. Note :- This item can be executed only after prior written approval by C.E.
273
-
687.6
Dry Lean Cement Concrete Sub- base Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8- 10 tonnes vibratory roller, finishing and curing as per clause 601 of specification complete in all respect. Deduct from Item if paver with electronic sensor, vibratory roller are not used and laying, compaction is done by any other method. (The acceptance criteria regarding level, thickness, surface regularity, texture finish, strength of concrete and all other quality control measures shall be the same as in case of machine laid work.) . Note:- This item is to be executed with prior written permission from the C.E.
77.7
-
1844.1
Cement Concrete Pavement Construction of un-reinforced, dowel jointed, plain cement concrete pavement M-30 grade concrete over a prepared sub base
with cement , coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures as approved, curing compound, finishing to lines and grades as per drawing as per IRC 15 2011 and as per relevant clauses of section 602 of specifications complete but excluding cost of steel in dowel bar and tie rods etc. Deduct from Items if paver with electronic sensor is not used and laying, compaction is done by any other method (The acceptance criteria regarding level, thickness, surface regularity, texture finish, strength of concrete and all other quality control measures shall be the same as in case of machine laid work.)by mechanical means) Note:- This item is to be executed with prior written permission from the C.E.
147
-
4041.9
Add extra in Item No.6.3, 6.4, 6.6 & 6.10 above for the cost of steel in dowel bar and tie rod including craddle, laps etc. complete required as per design. (I) Mild steel
0.735
-
35333.1
Tor steel
0.441
-
35333.1
Filler joint:- Providing & fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing & Technical Specification. Expansion joint
21
-
339.3
Providing and laying reinforced cement concrete pipe 300mm dia NP-4 for service ducts below concrete pavement.
12
-
641.7
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements