MP State Livestock And Poultry Development Corporation Tender

Supplying and erection of stay set complete with 19/20mm.dia 1.8 metre long stay rod, turn buckle, ancher plate of size 300mm x 300mm x 7.5mm, thimble, stay clamps, bow tightener, 7/4.00 dia G.I. stay wire etc. in cement concrete M-10 (1 Cement : 3 Coarse and : 6 granded stone aggregate 40mm nominal size) foundation including excavation and back refilling etc. as required.(SOR I.No. 42.29)

Supply, fabrication and erection of Angle/Chanel/Flat iron fitting for over head line & sub-station etc such as 'D' bracket, cross arms, top clamp, 'V' cross arms, Back/Support clamps or other similar work etc. including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of aluminium paint as required as per specification.(SOR I.No. 42.42)

Painting of poles Prima coat over new steel and other metallicsurface with red oxide zinc chromide paint complete with supply of material labour etc.including preparation of surface.SOR I.No 34.4.2

Prima coat with aluminium paint, brushing complete with material and labour including preparation of surface SOR I.No 34.4.3

Supply, laying and fixing of G.I. earth coil of 4mm dia G.I. wire having 120 turns of nearly 50mm dia. and 3 mt. long tail in existing pit duly earthed with pole etc complete as required as per specification.(SOR I.No. 42.68)

Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/3½ core/4 core ISI marked with alu. stranded /solid conductor25 sq. mm.3.5 core(SOR I.No. 41.1.8.1)

Laying of one number armoured / unarmoured power cable 1:1 KV grade of size not exceeding 25 sq. mm in the existing RCC hume/stone ware/G.I. pipe/surface in existing trench as required.(SOR I.No. 41.45)

Supplying, erecting and testing of approved make exhaust fanheavy duty with mounting frame, blades AC 230-250complete connection and including, frame bolt/anchor holefasteners etc. complete finished and as required.(SOR I.No. 30.6.4)

Supply and fixing of GI sheet 24 SWG exhaust fan louversincluding grouting bolt, nut, & finishing etc. on existing hole tocomplete the job as mentioned below :-(SOR I.No. 32.16.4)

Point wiring (excluding metallic switchbox & sheet but including switches,sockets, lamp holders/ceiling roses etc)with 1.5sq. mm. PVC insulated cableFRLS with copper multi strand conductor ISI marked in surface rigidP.V.C. conduit (MMS) ISI marked ofsuitable size and 1.5sq. mm. PVC FRLSinsulated copper earth continuityconductor of green colour inside conduitetc. as required as per specification for :- Primary short point (SOR I.No. 3.1.1.1)

Point wiring (excluding metallic switchbox & sheet but including switches,sockets, lamp holders/ceiling roses etc)with 1.5sq. mm. PVC insulated cableFRLS with copper multi strand conductor ISI marked in surface rigidP.V.C. conduit (MMS) ISI marked ofsuitable size and 1.5sq. mm. PVC FRLSinsulated copper earth continuityconductor of green colour inside conduitetc. as required as per specification for :-Primary medium point (SOR I.No. 3.1.1.2)

Point wiring (excluding metallic switchbox & sheet but including switches,sockets) for 3 pin 6 Amp. Socket outletpoint with 1.5sq. mm. PVC insulatedcable FRLS with copper multi strand conductor ISI marked in surface rigidP.V.C. conduit (MMS) ISI marked ofsuitable size and 1.5sq. mm. PVCinsulated copper earth continuityconductor of green colour inside conduitwith required materials as per specification on same board (SOR I.No. 3.2)

Wiring for circuit wiring with PVCinsulated cable FRLS with copper multistrand conductor ISI marked in surfacerigid P.V.C. conduit (MMS) of ISImarked suitable size etc. as required as per specification 2x2.5 Sq.mm.(SOR I.No. 3.3.1)

Point wiring (excluding metallic switch box & sheet) for 3Pin 16 Amp. socket outlet point with 4sq. mm. PVCinsulated cable FRLS with copper multi strand conductorISI marked in surface rigid P.V.C. conduit (MMS) ISImarked of suitable size etc. with 20/16 Amp. F.T. switch &socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuityconductor of green colour inside conduit, screwlessconnector for joints as per specification for :-Short point(SOR I.No. 8.1.1.1)

Supply and erection of approved make safe earthing electrode consisting pipe-in-pipe technology as per IS 3043-1987 made of corrosion free G.I. pipes with constant ohmic value surrounded by highlyconductive compound with high chargedissipation suitable for effective andmaintenance free earthing in earth pit ofminimum bore dia. 150mm size, asmentioned below :With 2 metre G.I. pipes having outer pipedia of 50mm having 80-200 microngalvanizing, Inner pipe dia. of 25mm having200-250 micron galvanizing, connection terminal dia. of 12mm in nominal soil with25 kg (one Bag) back filling bentonitecompound UL listed and confirm to relevantInternational/Indian standards around electrode upto ground level.(SOR I.No. 37.40.1)

Supply of ISI marked and accepted standard of miniaturecircuit breaker (MCB) of 'C' series with short circuitindication, suitable for 240/415 Volts,50 Cycle, 10kA/15 kA Value AC supply conforming to IS : 8828 :1996, IEC : 60898 :2002 & 60947-2 but withoutenclosures :-Four pole MCB FP 50Amp to 63 Amp 10kA rating(sor-27.8.4.4)

Supplying and fixing of approved make modular type PVCbox minimum depth 40mm and minimum thickness 2mmwith modular base and cover plate including fixing onsurface etc. as required for:-6 Module PVC box(SOR I.No. 18.3.4)

Supply of ISI marked and accepted standard of miniaturecircuit breaker (MCB) of 'C' series with short circuitindication, suitable for 240/415 Volts,50 Cycle, 10kA/15 kA Value AC supply conforming to IS : 8828 :1996, IEC : 60898 :2002 & 60947-2 but withoutenclosures :-spn MCB DP 6Amp to 32Amp 10kA rating1ating(sor-27.8.2.2)

Supply of ISI marked and accepted standard of miniaturecircuit breaker (MCB) of 'C' series with short circuitindication, suitable for 240/415 Volts,50 Cycle, 10kA/15 kA Value AC supply conforming to IS : 8828 :1996, IEC : 60898 :2002 & 60947-2 but withoutenclosures :-SP 6Amp to 32Amp 10kA rating (sor-28.8.1.2)

Supply of approved make powder coated sheet steelencloser SPN MCB DB inclusive of busbar, neutral bar,earth bar, connection copper wire not less than 16 sq.mm& two earth terminals etc. complete as perIS:13032(exclusive of MCB & isolator)-8 Way double door IP 43 protection (sor-27.11.5)

Supplying of approved make TPN MCB DB metal double door IP 43 protection with provision for FPMCB/ Isolator/ RCCB/ RCBO as incomer and SP MCBsas outgoing inclusive of busbar, neutral bar, earth bar,connection copper wire not less than 16 sq.mm & twoearth terminals etc. complete as per IS:13032(exclusiveof MCB & isolator):4 Way (4+12) (sor-27.12.1))

Supply of ISI marked and approved make of mouldedcase circuit breaker (MCCB) suitable for 3 phase,3 pole,50 Hz, 415 Volts, AC supply with respective interruptingcapacity (KA) at 415 Volts cited against their rangestandard conforming to IS – 8828 MCCB 25kA current rating, 3P -25 to 100Amp & 80% -100% adjustable (sor-27.1.3)

Supplying and fixing flood light with high power LED of 3 to 6 Watteach assembled on single MCPCB and additional unique peanut lens on each LED, system lumens output withefficacy120 lm/Watt.luminiare having color temp upto 6500K & 50000 hrs. burning life with minimum @ L 70, The colour rendering index of LED lightshould be more than 70. Luminiare comprises of driver, PF 0.95 & surge protection 10KV. Housing made of pressure die castaluminium with heat resistant flat glass, IP65 protection. SubmissionLM 79-08/IS16106 (2012),IEC60598,IEC61347i/c connection wire,testing etc. to complete the job.60Watt, color temp 3000-6500k as required. (sor-31.14.3)

Supplying and fixing flood light with high power LED of 3 to 6 Watteach assembled on single MCPCB and additional unique peanut lens on each LED, system lumens output withefficacy120 lm/Watt.luminiare having color temp upto 6500K & 50000 hrs. burning life with minimum @ L 70, The colour rendering index of LED lightshould be more than 70. Luminiare comprises of driver, PF 0.95 & surge protection 10KV. Housing made of pressure die castaluminium with heat resistant flat glass, IP65 protection. SubmissionLM 79-08/IS16106 (2012),IEC60598,IEC61347i/c connection wire,testing etc. to complete the job.150Watt, color temp 3000-6500k as required. (sor-31.14.6)

Industrial hooter: Providing & fixing of industrial hooter speaker horn type ABS body with working AC Voltage 220V A.C./24V D.C. current consumption, sound output 120 DB, material M.S. sheet. (sor-50.9)

Supply and fixing street light with high power LED of 3 to 6 Watteach on existing bracket assembled on single MCPCB and additional unique peanut lens on each LED, system lumens output withefficacy120 lm/Watt. luminiare having color temp upto 6500K & 50000 hrs. burning life with minimum @ L 70, The colour renderingindex of LED light should be more than 70. Luminiare comprises of driver, PF 0.95 & surge protection 10KV. Housing made of pressuredie cast aluminium with heat resistant flat glass, IP65 protection. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347 i/cconnection wire, testing etc. to complete the job.60Watt, color temp 3000-6500k as required.(sor-31.13.2)

Supplying, erection and testing of approved make electricCeiling fan of double ball bearing complete with standarddown rod, canopy, hanging shackle, Aluminium blades,without regulator, A.C. 230-250 volts including connectionswith all necessary material complete of approved as requiredconfirming to IS :374/2019 with upto date amendmentsCeiling Fan (ISI marked)-1200 mm Sweep, with minimum airdelivery 210 m³/min and service value ≥4.00 as per BEE..(sor-30.1.2)

Supply and fixing of approved make step type modularelectronic fan regulator including connection etc. as required on existing board 100 Watt(2 module) (sor-29.25.2)

Supply and fixing Led tube rod comprising of LED tube with nonintegral/integral driver, upto 6500K color temp having 40000 burninghrs life with minimum @ L 70, system lumen output should beminimum with system efficacy 100 lm/Watt. LED driver PF 0.95& THD 20%. The colour rendering index of LED light should be more than 70. Submission LM 79-08/IS16106 (2012), IEC60598,IEC61347i/c connection wire, testing etc. to complete the job. (SOR I.No. 31.3.4)

Supply, installation, testing and commissioning of astro-time switch based on astro program i.e. calculation of sunrise and sunset times through date, time and Indian PIN codes. It shall have an option of astro ON period override by time switch and Offset function which allows programming of switching times offset from the astronomic time. The 230 V AC operated astro time switch shall have an operating range of 96…253V AC with 1 NO, 16 A, AgSnO2 contact material with starting current of 120A and 1 CO cadmium free contacts, it shall have LCD status indication with back light display along with internal easily replaceable battery on the front side for set-up and programming. The electrical life at rated load AC1 shall be 1 lakh cycles and shall work at an ambient temperature of -20 to +50 deg C. It shall have a dielectric strength between supply and open contacts of 4000V AC, between open contacts 1000V AC respectively and rated impulse to complete the job. (SOR I.No. 52.3.1)

Supply, installation, testing and commissioning of 230 V AC operated LDR shall have an operating range of 96…253V AC with 1 NO, 16 A, AgSnO2 contact material with starting current of 120A and light dependent relay with a lux sensitivity adjustment of 1 to 80 lux shall operate on 230 V AC with an operating voltage range of 0.8 to 1.1 times that of nominal voltage. The contacts shall be rated for 16 Amp, cadmium free along with the cadmium free light sensor and shall operate at an ambient temperature of -30 deg C to + 70 deg C. The electrical service life of LDR shall be 1 lakh switching cycles at full load. The dielectric strength between open contacts should be 1000 V AC and conducted disturbance immunity i.e. surge (1.2/50μs) on L and N (differential mode) of 4 kV. The LDR shall have necessary approvals like CE, GOST and IMQ and shall be IP 54 protected and able to switch phase and neutral lines for LED lamp load of 400 (SOR I.No. 52.1.1)

Point wiring (excluding metallic switchbox & sheet but including switches,sockets) for 3 pin 6 Amp. Socket outletpoint with 1.5sq. mm. PVC insulatedcable FRLS with copper multi strand conductor ISI marked in surface rigidP.V.C. conduit (MMS) ISI marked ofsuitable size and 1.5sq. mm. PVCinsulated copper earth continuityconductor of green colour inside conduitwith required materials as per specification on same board (SOR I.No. 3.2)

Supplying of pre stressed cement concrete (PCC) poleconforming to IS: 785 at work site including required transportation.PCC pole 9.1 meter Long 280 kg (SOR I.No. 42.4.2)

Erection of R.C.C./P.C.C. pole of length 8 meters butnot exceeding 11 meters in brick ballast and ramming the foundation including excavation and refilling etc.as required.(SOR I.No. 42.21)