MP State Livestock And Poultry Development Corporation Tender

Supplying and erection of 33kV Porcelain pin insulatorcomplete with long steel head G.I. pin, nut, washer etc. as required(SOR I.No. 42.46)

Supplying and fixing 33/11/0.4 KV enamel coated danger board size 200x250mm with clamp on existing HT/LT structure / poles.(SOR I.No. 42.69)

Supply & fixing anti climbing device with 2 ply G.I. barbed wire 1 Kg. per pole complete as per specification. (SOR I.No. 42.67)

Supplying, installing, testing and commissioning of 33/0.4 K.V. 3 Phase 50 Cycle oil immersed, naturally cooled, outdoor type transformer connected delta on H.T. side andstar on L.T. side, hand operated off load Tapchangerswitch, rating and diagram plate, two earthing terminal, lifting lugs, oil level gauge drain valve with plug, temperature not exceeding 50ºC on load, temperature dialgauge, bucholz relay, oil conservator with drain plug, oil filling hole with plug, dehydrating silica gel breather on eyelevel, four unidirectional roller, arcing horns, explosion vent,terminal arrangement bushing on H.V. side and cable boxon LV side, first filling of oil up to desired level and transformer installing on existing structure with all required materials arrangements as required as per IS specification. Marked ISI & level 3 Copper wound 200KVA(SOR I.No. 42.70.2.2)

Supplying and erection of single piece non-linear resistorpolymer type lightning arrestor (Set of 3 Nos.) for 3 wire,33kV overhead lines/ sub-station with rated voltage of 27kV(rms) with a nominal discharge current rating of 10 KA andcomplete with galvanized clamping arrangement, G.I. bolts,nuts, washer etc. as required. (SOR I.No. 42.61)

Supplying installing, testing & commissioning D.O. fuse assembly with brass part contact for 33 or 11/0.4 KV DP Structure set of 3 Nos. with fuse barrel i/c required fuse element & other materials as per specification on existing D.P. structure as required.33kV, (SOR I.No. 42.63.2)

With 3 metre pipe of 80mm outer dia., 40mm inner dia and 14mm terminal dia. In soft/hard rock/marshy soil with 50 kgs. (two bag) back filling bentonite compound UL listed and confirm to relevant International/Indian standards around electrode upto ground level.. (SOR I.No. 37.40.4)

Supply, fabrication and erection of Angle/Chanel/Flat iron fitting for over head line & sub-station etc such as 'D' bracket, cross arms, top clamp, 'V' cross arms, Back/Support clamps or other similar work etc. including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of aluminium paint as required as per specification.(SOR I.No. 42.42) (+ Earthing Chamber Cover Plate)

Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc.as required as per spececification Aluminium bus bar strips with PVC sleeves (SOR I.No. 29.28.5)

Supplying and laying 25mm X 5mm G.I. strip at 0.5 Metre below ground level as strip earth electrode including soldering etc. as required. (SOR I.No. 37.9)

Supplying & fixing of fire extinguisher/refills as per IS specificationDuly refilled 6 Kg ABC type duly refilled 6 Kg & ready touse(SORI-42.77.1)

Duly refilled 4 Kg ABC type duly refilled 4 Kg &ready to use (SORI-42.77.2)

Supply of hand gloves 33KV tested(42.80)

Supply of fiber D.O operating rod for 11/33KV tested (42.82)

Supply of shock instruction chart duly framed with glass, as reqd.(42.84)

Collection and spreading of metal dust, murum and 40mm graded hard metal in sub-station yard or as required as mentioned below -Metal dust (SOR I.No. 42.88.1)

Murum (SOR I.No. 42.88.2)

Prima coat with aluminium paint, brushing complete with material and labour including preparation of surface SOR I.No 34.4.3