MP State Livestock And Poultry Development Corporation Tender

Supplying and erection of stay set complete with 19/20mm.dia 1.8 metre long stay rod, turn buckle, ancher plate of size 300mm x 300mm x 7.5mm, thimble, stay clamps, bow tightener, 7/4.00 dia G.I. stay wire etc. in cement concrete M-10 (1 Cement : 3 Coarse and : 6 granded stone aggregate 40mm nominal size) foundation including excavation and back refilling etc. as required.(SOR I.No. 42.28)

Supply, fabrication and erection of Angle/Chanel/Flat iron fitting for over head line & sub-station etc such as 'D' bracket, cross arms, top clamp, 'V' cross arms, Back/Support clamps or other similar work etc. including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of aluminium paint as required as per specification.(SOR I.No. 42.42)

Supplying and erection of 33KV (45 KN) polymer discinsulators for 33KV overhead lines with galvanizedinsulator fittings, ball and socket type, and completewith galvanized strain clamp, bolts, nuts, washers etc. as required.(SOR I.No. 42.55)

Supplying and drawing all aluminium alloy conductor (AAAC) of approved make conforming to IS 398-1979 Pt. IV, including binding at existing insulator, jointing, jumpering, tearing off, connecting etc. as required including clearing of obstacles (if any) 0.1 sq inch (100 Sq.mm Al. EQ. ) - (Dog) (SOR I.No. 42.5.4)

Supplying and erection of 33kV Porcelain pin insulatorcomplete with long steel head G.I. pin, nut, washer etc. as required(SOR I.No. 42.46)

Supply, laying and fixing of G.I. earth coil of 4mm dia G.I. wire having 120 turns of nearly 50mm dia. and 3 mt. long tail in existing pit duly earthed with pole etc complete as required as per specification.(SOR I.No. 42.68)

Supplying and fixing 33/11/0.4 KV enamel coated danger board size 200x250mm with clamp on existing HT/LT structure / poles.(SOR I.No. 42.69)

Supply & fixing anti climbing device with 2 ply G.I. barbed wire 1 Kg. per pole complete as per MPMKVVCO. Specification. (SOR I.No. 42.67)

mmSupplyinganddrawingguardwire/earthwire/bearerwire18.62sqmm(4.87mm.dia/6swg)G.I.includingstringing,bindingatexistinginsulatorsorbrackets,jointing,jumpering,connecting&cradleetc.asrequired and clearing of obstacles (if any) (SOR I.No. 42.10)

Supplying, installing, testing and commissioning of 33/0.4 K.V. 3 Phase 50 Cycle oil immersed, naturally cooled, outdoor type transformer connected delta on H.T. side andstar on L.T. side, hand operated off load Tap changerswitch, rating and diagram plate, two earthing terminal, lifting lugs, oil level gauge drain valve with plug, temperature not exceeding 50ºC on load, temperature dial gauge, bucholz relay, oil conservator with drain plug, oil filling hole with plug, dehydrating silica gel breather on eyelevel, four unidirectional roller, arcing horns, explosion vent, terminal arrangement bushing on H.V. side and cable boxon LV side, first filling of oil up to desired level and transformer installing on existing structure with all required materials arrangements as required as per IS specification.Energy efficiency level -3 (New level-2) Copper wound 315KVA(SOR I.No. 42.71.2.3)

Supplying and erection of single piece non-linear resistorpolymer type lightning arrestor (Set of 3 Nos.) for 3 wire,33kV overhead lines/ sub-station with rated voltage of 27kV(rms) with a nominal discharge current rating of 10 KA andcomplete with galvanized clamping arrangement, G.I. bolts,nuts, washer etc. as required. (SOR I.No. 42.61)

Supplying installing, testing & commissioning of outdoor H.T., AB switch assembly set gang operated with brass contact parts, including required GI pipe operating rod, handle & locking arrangement on On-Off position conforming to IS complete with required material and installing on existing DP structure to complete the job as required as per specification.(Set of 3 nos.) 33 kV, 600A.(SOR I.No. 42.61.2 )

Supplying installing, testing & commissioning D.O. fuse assembly with brass part contact for 33 or 11/0.4 KV DP Structure set of 3 Nos. with fuse barrel i/c required fuse element & other materials as per specification on existing D.P. structure as required.33kV, (SOR I.No. 42.62.12)

mmWith2metreG.I.pipeshavingouterpipediaof50mmhaving80200microngalvanizing,Innerpipedia.of25mmhaving200250microngalvanizing,connectionterminaldia.of12mminnominalsoilwith25kg(oneBag)backfillingbentonitecompoundULlistedandconfirmtorelevantInternational/Indianstandardsaroundelectrode upto ground level. (SOR I.No. 37.40.1)

Supplying and laying 25mm X 6mm G.I. strip at 0.5 Metre below ground level as strip earth electrode including soldering etc. as required. (SOR I.No. 37.9)

Supply, installation, testing & commissioning of HTtrivector energy meter, DLMS compliant category-A(for substation/feeder metering energy audit), 3 phase4 wire, 110 Volts, 5 Amp, accuracy class 0.5S withGSM (GPRS compatible) modem suitable for required C.T. including uPVC box/sheet metal box with TTBduly tested from electricity board.. (SOR I.No. 42.118)

Designing and construction of Pedestal (Plinth) fortransformerof desired size including excavation in hard rock/soft rock, base concrete 1:4:8, 20mm thick and pedestal of RCC 1:2:4 including required tar steel reinforcement for required height as per IE Rules from base concrete including shuttering and finishing with 10mm thick plaster in cement mortor 1:3 curing & white washing etc. complete as per specifications.(SOR I.No. 42.87)

Collection and spreading of metal dust, murum and 40mm graded hard metal in sub-station yard or as required as mentioned below -Metal dust (SOR I.No. 42.88.1)

Murum (SOR I.No. 42.88.2)

Painting of poles Prima coat over new steel and other metallicsurface with red oxide zinc chromide paint complete with supply of material labour etc.including preparation of surface.SOR I.No 34.4.2

Prima coat with aluminium paint, brushing complete with material and labour including preparation of surface SOR I.No 34.4.3

Supply of XLPE insulated FRLS heavy duty power cable conforming IS-7098 (Part-1) 1988, 1100 Volt grade, 2/3/4/8/10/12 core ISI marked with copper stranded/solid conductor.Armoured 12 core2.5 Sq. Mm.(SOR I.No 41.4.11.1)

conductorSupplying,drawingandtestingofXLPEinsulatedcoveredaluminiumconductorofapprovedmake,stringing,makingoffcompletewithbindingatexistinginsulator,jointing,jumpering,tearingoff,connectingetc.asrequiredandclearingofobstacles(if any) etc..99 Sqmm XLPE 33KV grade(SOR I.No.41.2.2.1)