MP Rajya Sahakari Bank Maryadit Tender

Painting with synthetic enamel paint of approved brand and manufacturer of required colour to given an even shade. two or more coats

providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, like Birla white, J k white over the plastered wall surface to prepare the surface even and smooth i/c all cost of material , labour and scaffold etc. in all position complete..

finishing walls with premium acrylic smooth exterior paint with silicon additives of required shade new work (two or more coats applied @ 1.43 ltr/10sqm over and i/c priming coat of exterior primer applied @2.20kg/10sqm

Providing and fixing false ceiling at all height i/c providing and fixing of frame work. made of special sections, power pressed from M. S. sheets and galvanized with zinc coating of 120 gms/sqm(both side i/c. as per IS :277 and consisting of angle cleats of size 25mm wide x1.6 mm thick with flanges of 27mm and 37mm, at 1200 mm centre, on flange fixed to the ceiling with dash fastener 12.5 dia x50mm long with 6mm dia bolts other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate G. I. channels 45x15x0.9mm running at the spacing of 1200mm centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.5 mm, at 450mm centre, to centre shall be fixed in a direction perpendicular to GI intermediate channel with connecting clips made of 2.64 mm dia x 230mm long G.I. wire at every junction, i/c fixing perimeter channels 0.5 mm thick 27mm high having flanges of 20mm and 30mm long the perimeter of ceiling fixed to wall/ partition with the help of rawl plugs at 450mm centre, with 25mm long dry wall screws @230mm interval i/c fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5mm at 230mm c/c, i/c jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm or both sides of joint andtwo coats of primer suitable for board all as per manufacturer specification and also i/c the cost of making opening for light fittings, grills, diffusers, cutouts made frame of perimeter channels suitably fixed, all complete as per drawings. specification and direction of engineer in charge but excluding the cost of painting with. 12.5mm thick tapered edge gypsum plain board moisture resistant board

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles, i/c applying a priming coat approved steel primer. Rate includes recess cutting in floor and making good the same wherever required.

12mm cement plaster of mix : 1:4

Providing and fixing white vitreous china flat back or anti germ fluoro polymer coated urinal (inbuilt spreaders, inbuilt bottle trape and inbuilt ceramic west coupling size of 670x330x325mm with 15mm brass made prismatic auto closing concealed urinal flush valve with wall flange( Decol technology, 400000 operation warranted) complete i./c painting of fittings and brackets, cutting making good the walls and floors wherever required; fixing.white vitreous china anti germ fluoro- polymer coated urinal size 670x330x325mm with 15mm brass made prismatic auto closing concealed urinal flush valve with wall flange (Decol technology, 400000 operation warranted)

Providing and fixing white vitreous china anti germ fluoro polymer coated couple water closet flushing capacity 3 and 6 litre size 760x360x635mm of approved shape (couple closet W.C pan size 760x360x635mm) with 15mm quarter turn angular stop cock and PVC connection pipe and all fittings and fixtures complete i/c cutting making good the walls and floors wherever required. Anti germ fluoro polymer coated couple water closet size 760x360x635mm with solid poly propylene made soft closing seat cover

Providing and fixing white vitreous china anti germ fluoro polymer coated wash basin size 160x580x450mm with CI Brackets 15mm CP wall mounted pressmatic pillar cock auto closing system (Decol technology), 15mm quarter turn angular stop cock 32mm CP brass made waste coupling length 130mm and 32mmCPP Brass made bottle Trape size 200x300mm fittings and fixtures complete i/c painting of fittings and cutting and making good the walls and floors wherever required; white vitreous china anti germ fluoro polymer coated wash basin size 160x580x450mm with basin mounted pressmatic pillar cock auto closing system (Decol technology

Providing and fixing anti germ fluoro polymer coated water closet squatting pan(Indian type WC 260x440x580 pan) with 100mm sand cost iron P an S trap, and 7.2 litre low level dual flush PP (poly propeline) made open slim wall cistern capacity 3 litre /6litre flushing with all fittings and fixtures complete i/c cutting and making good the walls and floors wherever required white vitreous china anti germ fluoro polymer coatedorrissa pattern WC pan of size 260c440c580mm with interior foot rest.

Providing & Fixing unplasticised PVC pipe i/c jointing with seal ring conforming to IS:5382 leveling 10mm gap for thermal expansion single socketed pipes for working pressure of 4 kg 75mm diameter (Minimum wall thickness 3:2mm)

110mm diameter (Minimum wall thickness 3:2mm)

Providing and fixing Stainless steel A ISI 304 (18/8) Kitchen sink as per IS: 13983 with CI brackets and stainless steel plug 40mm i/c painting of fittings and brackets, cutting and making good the walls wherever required 610x510mm

Granite work gang saw cut(Polished and machine cut) of thickness 18mm for flooring , platform wall lining ( veneer work) backing filled with grout of average 12mm thick in cement mortar 1:3 (1 Cement: 3 sand) i/c pointing with white cement mortar 1:2 ( 1 white Cement: 2 marble dust with an admixture of pigment to match the marble shade Area of slab over 0.50 sqm

Applying POP zero punning on even and uneven wall surface for achieve smooth finish punning thickness not less than 6mm

Textured paint - Providing and painting texture paint in two or more shades with roller and spray, after preparing the bases for the same.

Providing and laying melamine polishing (two or more coats) i/c a coat of wood filler on new work.

Providing and fixing glazing in aluminium doors windows ventilator shutters and partition etc with epdm rubber/neoprene/gasket etc complete as per architectural drawings and direction of engineer in charge with plain glass of 5.0mm

Providing and fixing aluminium work for doors, and windows ventilators and partition with extruded builtup standard tubular section/appropriate Z section and other section of approved make confirming to is 733 and is 1285 fixing with dash fasterns of required dia at top bottom and sides with required EPDM rubber/neoprene/gasket etc.aluminium section shall be smooth rust free straight mitred and jointed mechanically wherever(Minimum thickness of powder coating 50micron)

brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process crushing strength not less than 40kg/cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level i/c curing etc complete

Providing half brick masonary with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process crushing strength not less than 40kg/cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level

Roller blinds (Providing and fixing roller blinds 1 st quality as per direction of engineer in charge)

Removing dry oil bound distemper water proofing cement paint and the like by scarping and preparing the surface smooth i/c necessary repairs to scratches complete

Providing and fixing 600x450mm bevelled edge mirror of superior glass(of approved quality) complete with 6mm thick Hrd board Ground to wooden cleats with cp bras screws and washers complete

Providing and fixing two ways bib cock with wall flange model make somany/jaguar//parryware complete as per instruction of E in c i/c cutting & making goods the walls and floors wherever required; as per manufacturer instructions and direction of E in c (Kindly refer to original equipment manufacturer catalogue numbers of respect 3 model and make

Providing and fixing hand shower (health faucet) brass with flexible tube upto 1.5mtr long i/c all fittings etc complete as per approved by E in c

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot & cold water i/c all CPVC plain & brass threaded fitting this includes jointing of pipes & fittings with one step CPVC solvent cement trenching refilling & testing of joints complete as per direction of E in c 20mm nominal outer dia pipes for internal work

Glazed Door:- Providing & Fixing 12mm thk. toughed glass door shutters with etching in approved pattern and design, i.c 3 nos. 125x32mm SS bearing hinges, 125 mm long stainless steel door handle, Godrej make mortice lock, rubber buffer, stopper and other hardware fittings complete with T. W. bottom rail of size 900mmx300mm, 40mmthk., P. U. Melamine polished providing floor spring & pivot of hardyn / Everite /dooreset Droma or equivalent make as per drawing/ design & instruction of engineer-in- charge.

covered by 8mm ply on both sides. The door shall be finished on both sides with 1.0mm thk. laminate .A door frame of 150x50teak wood section shall be provided finished in melamine. Rate shall include necessary Visible panel, itching film approved locking systems(godrej) make -ultra mortise dead lock), floor springs(Hemco-Heavy) duty), door stopper, a pair of handles(Neki make-kich-PHS1908S), separate lock, buffers, tower bolts, etc with or with out door frames as mentioned above .

Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood pre laminated one side decorative lamination on other side balancing lamination grade I Type II IS :12823 marked i/c priming coat on unexposed surface, with necessary fixing arrangement and screws etc complete. 12 mm thick

Staff workstation tables:- Providing & Fixing tables of specified sizes to be made up of 18mm M.R. grade (Duro / Corbett/ Green/Action Tessa laminated board), etc. as per detailed Architectural drawings using Hettich / Ebco/godrej or equivalent make hardware , having CPU stand, a keyboard tray drawer, (Ebco) unit etc..All exterior surface to be duly laminated and finished using 1.00mm laminate and inner side 0.8mm laminate with necessary hardware such as handles, wire manager, telescopic drawer slides i/c 8mm glass top with mirror edg etc. as per design. Note:- if the size of the table length small and big then rate of table decide in respect of area calculation (area means top cover length and width) on proportion base

Manage r Table (2100 x 825 x 750)

Officer Table L-Shape(Size 1500 x 750 x 750)

Staff Table (1350 x 750 x 750)

Teller (1800 x 750 x 750mm)

Diluting and injecting chemical emulsion for POST CONSTRUCTION AL anti termite Treatment Treatment at point s of contact of wood work by chemical emulsion chlorpyriphos /lindane (In oil or kerosene based solution) 0.5 litres per hole by drilling 6mm dia holes at downward angle of 45 degree at 150 centre to centre and scaling the same

Providing and fixing 500mm depth and 2100high file cabinet in two openable shutters and outer frame constructed with 19mm thick ply/Board BWR grade ( Duro/mayor? Aeon), and laminate 1mm thick external and 0.8mm inner all side finish (Airom, Timex/ Duro/Royal touch) i/c shelves with equal width of 450mm,S.S. finish handle 200mm long, lock complete as per given drawing and bank engineer in charge

Providing and fixing back storage unit constructed with 19mm thick ply/Board BWR grade ( Duro/mayor? Aeon), and laminate 1mm thick external and 0.8mm inner all side finish (Airom, Timex/ Duro/Royal touch) i/c upper portion shall be 100mm drawer and openable hinged shutters on lower portion with built in profile handle with all necessary fitting (Ebco-channels, magnum/SS finish - hinges Godrej Lock, Cathers etc.) as per given drawing and bank engineer in charge

Full hight partition :- providing and fixing full height partition with inside framing of second class teak wood section of size 50mmx40mm @ 600mmc/c both ways horizontally and vertically, fixed with 12mm thk. B.W.R. grade plywood (Duro/Aeon/ Mayur) and finished with approved shade laminate on both the sides, complete as per drawing and engineer in charge

Full hight partition :- providing and fixing partially glazed and partially wooden front partition for cash counter, of size 1250mmx2400mm(1250mm width and 2400mm high), with front portion of panelle in curved profile upto working top and straight panel on top of size (1250mmx300mm)fixed with inside framing section of F second class teakwood fixed with 12mm thk. B.W.R. grade plywood(Duro/Aeon/ Mayur) and finished with approved shade laminate and gazed portion in between of size 1250mmx1050mm fixed with 8mm thick toughned glass cutting an opening of 450x150mm in bottom with bevelled edges, polishing etc , complete as per drawing detail i/c all fittings and accessories complete as per drawing and and engineer in charge

Low high partition :-providing and fixing low height(1200mmhigh) partition with inside framing of second class teak wood section of size 50mmx40mm @ 600mm c/c both ways horizontally and vertically, fixed with 12mm thk. B.W.R. grade plywood (Duro/Aeon/ Mayur) and finished with approved shade laminate on both the sides, outer side shall be in combination of metallic laminate in 25mm grooves and wooden laminate in remaining portion and inner side shall have provisions for soft board of high density in given space as per drawing and engineer in charge

providing Godrej Make chair of Approved colour (a) Branch Manager Model Earl(High Back)

(b) Officer Chair Model Earl (Mid Back)

(c ) Computer Chair Model Diva 7046 R

(d) Visitor Chair Model No. 1018

Supplying, Installation an d commissioning of 1.5 capacity all copper (Condenser split A.c System of approved make (Voltas/ LG/Samsung ) i/c indoor and outdoor copper tubes drain pipe cable stand with one year warranty.

Point wiring (including metallic modular switch box& sheet, switches, sockets, lamp holders/3 plate ceiling roses etc. with 1.5 sq.mm. PVC insulated cable FR with copper multi strand conductor of approved make in concealed/surface/fall ceiling rigid P.V.C. conduit (HMS) of approved make suitable size and 1.5sq.mm. PVC insulated copper earth continuity conductor green colour inside conduit etc. as required as per specification for:-Light point /fan points/Bell point

Short point 0-3 Mtr.

Medium point 3-6 Mtr.

Long point 6- 10 Mtr.

Extra long 10-15 Mtr.

Call Bell/Buzzer points Medium point

Point wiring (i/c modular metallic switch box sheet, switches, sockets) for 3 pin 6 Amp, socket outlet point with 1.5 sq mm. PVC insulated cable FR with copper multi strand conductor of approved make in concealed/surface/fall ceiling rigid PVC conduit (HMS) of approved make of suitable size and 1.5 sq.mm. PVC insulated copper earth continuity conductor green colour inside conduit with required materials as per specification on same board. :-

Wiring for circuit wiring with PVC insulated cable FR with multi conductor of approved make in concealed/surface/fall ceiling rigid PVC conduit (HMS) of approved make of suitable size etc. as required as per specification :-

a)      2x2.5+1x2.5sq.mm.

b) 4x2.5+1x2.5sq.mm.

c) 6x2.5+1x2.5sq.mm.

d) 8x2.5+1x2.5sq.mm.

Point wiring (i/c metallic switch box & sheet ) for 3 pin 16 Amp, socket outlet point with 4 sq mm. PVC insulated cable FR with copper multi strand conductor of approved make in surface or concealed or fall ceiling in rigid PVC conduit (HMS) of suitable size i/c painting etc. with 16 Amp. modular switch & socket/SS combined 16Amp. of ISI marked and 4sqmm PVC insulated copper earth continuity conductor of green colour inside conduit as per specification for : On Separate Board

Short point 0-3 Mtr.

Medium point 3-6 Mtr.

Long point 6- 10 Mtr.

Extra long 10-15 Mtr.

M C B DB Supplying & fixing as required of approved make powder coated vertical TPN MCBDB Mrtal Double Door with MCCB 100TP 25ka as incomer and space for SP/TP MCBs as outgoing (without MCBs) inclusive of busbar & Connections etc without MCBs

8way with MCCB

make -lagrant Supplying & fixing of approved make and accepted standard of miniature circuit breaker (MCB) of 'C' series suitable for 240/415 volts, 50cycle, 10KA value AC supply make legrant single pole (sp)

6 Amp to 32 Amp rating

cable Supplying & laying as required of XLPE insulated power cable ( conforming IS-7098)11 Volt grade Heavy duty power cable 3½ core of approved make with Alu. standard /solid conductor

Armoured 3½ core

50sq.mm (XLPE) Supplying, erection and testing of approved make electric ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminum blades, without regulator, A.C. 230-250 volts i/c connections with all necessary material complete as required.

ceiling fan(Energy saver 50w) 1200 mm sweep

Supplying, erecting and testing of approved make Exhaust Fan heavy duty with mounting frame , blades A.C. 230-250 complete connections and i/c frame bolt/Anchor hole fastners etc complete finished as required

300mm sweep 900RPM

Supplying fixing testing and commissioning mounted LED 15 watt. LED fixtures of approved make Sysco/havels/

Supplying fixing & testing down light 5 watt. of approved make Sysco/hevels/

Supplying fixing PVC conduit of approved make alongwith the accessories in surface/onceled/fall ceiling etc as required. PVC conduit 20mm(MMS)

PVC conduit 25mm (MMS)

Supplying & drawing single pair 0.5 sq mm PVC insulated copper conductor unamoured telephone cable in existing surface/concealed, conduit as (i) 1 Pair

Supplying, fixing, testing and commissioning of double outlet with shutter modular type telephone outlet(RJ11) with suitable size modular box & plate complete

Supplying & drawing cat 6 computer cable in in existing surface/concealed,

Supplying, fixing, testing and commissioning of I/O box with shutter modular type with suitable size modular box & plate complete as required