MP Power Transmission Company Limited Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
MP Power Transmission Company Limited - MPPTCL Tender
Civil And Construction
Electrical and Electronics
Electrical Works
Eprocure
Opening Date23 Jul 2024
Closing Date14 Oct 2024
Tender Amount₹ 2,01,16,000
Costs
EMD
₹ 4,02,320Document Cost
₹ 5,900Tender Fee
₹ 1,534
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MPPTC_359212_1Bid Award Id
ViewTender No
557Tender Authority
MP Power Transmission Company Limited ViewPurchaser Address
-Website
http://https://mptenders.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Civil RandM works of staff Quarters at 220 KV S/S Dhar, Depalpur, Pithampur Sec- I, Pithampur Sec- III (Bagdon), 132 KV S/S Colony Dhamnod, 400 KV S/S Colony Indore and 220 KV S/S South Zone Colony Indore.
BOQ Items
3004929, 5.16.6, Reinforcement for R.C.C. work including straightening, cutting, bending, placing .....etc. complete . Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 .separately as shown in the drawing and as per ....Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786
200
12580
62.9
3004884, 5.1.1, Providing and laying in position specified grade of reinforced cement concrete (with 20mm ...reinforcement - All work up to plinth level : M-20 Grade Concrete
5
28980
5796
3006325, 14.30, Removing dry or oil bound distemper, water proofing ….. repairs to scratches etc. complete.
1250
7500
6
3006206, 13.41, Providing and applying white cement based putty of average thickness……. of APD/Chief Engineer will be required.
1250
92500
74
3006924, 18.6.2.2, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply …Charge...Concealed work including cutting chases and making good the walls etc...20 mm nominal outer dia .Pipes.
50
11700
234
3006929, 18.7.3, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,……..testing of joints complete as per direction of Engineer-in- Charge. External Work.25 mm nominal outer dia .Pipes.
30
8640
288
3007138, 18.14.3, Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore
5
2495
499
3007218, 18.34, Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore.
5
3890
778
3007665, 25.45, Providing and fixing in position best Indian Auto Closing 32mm, Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/cartridge). (Premium Range)
5
13610
2722
3006809, 17.61, Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet
10
5170
517
3006644, 17.17.2, Providing and fixing white vitreous china water closet squatting pan (Indian type)..Orissa pattern W.C. pan of size 580x440 mm
5
6610
1322
3006805, 17.59.5.1, Providing and fixing unplasticised PVC moulded fittings/ …..expansion..Bend 87.50..75 mm bend
10
1170
117
3004746, 2.6.1, Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas…….and neatly dressed.All kinds of soil
15
1935
129
3007292, 19.4.2, Providing and laying below…..paid seperataly...160 mm diameter OD (min. wall thickness 4.0mm)
50
23850
477
3007291, 19.4.1, Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly...110 mm diameter OD (min. wall thickness 3.2mm)
5
1170
234
3007297, 19.5.2, Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design:..160 mm diameter PVC. pipe
50
35200
704
3007296,19.5.1, Providing and laying cement concrete 1:3:6 …. bed concrete as per standard design:..110 mm diameter PVC. pipe
5
2880
576
3006033, 12.32.2, Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water... expansion. 110 mm diameter (minimum wall thickness 2.2mm)
18
4284
238
3007366, 19.27.1, "Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with .... complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :..With well burnt bricks"
10
39410
3941
3006637, 17.14.2.1, Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I...required :..Kitchen sink without drain board..610x510 mm bowl depth 200 mm.
5
22915
4583
3005828, 11.22.5, Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in- Charge. Cuddpah stone
12
15348
1279
3005862, 11.41, Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
5
1160
232
3005877, 11.51, Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 12 mm thick cement mortar 1:3 (1 Cement : 3 sand) including grouting the joints with white cement and matching pigments etc., complete.
120
83760
698
3005876, 11.50, Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement and matching pigments etc., complete.
25
16100
644
3006816, 17.64.1.1, Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete..Semi rigid pipe..32 mm dia
5
435
87
3006211, 13.46, Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work
1250
80000
64
3006240, 13.64, Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
150
7950
53
3006285, 14.5.1, Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm
25
16975
679
3007215, 18.31, Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, 15 mm nominal bore.
15
6870
458
3007216, 18.32, Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mm nominal bore.
5
2630
526
3006357, 14.52.1, Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade..Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface.
550
35750
65
3007228, 18.43.2, Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :..150 mm diameter
5
775
155
3005212, 9.18.2, Providing and fixing ISI marked flush door shutters ... ...shutter. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
35
82950
2370
3005916, 11.76.1, Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different ….matching pigments etc. complete Plain ivory light shade Size 600X600mm thickness 9-10mm
175
166250
950
3005918, 11.77.1, Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different..... skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) ... complete Plain ivory light shade Size 600X600mm thickness 9-10mm
25
23500
940
3005665, 10.2, Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
50
3450
69
3005535, 9.166.1, Providing and fixing factory made 30 mm thick PVC door shutter consisting of frame made..direction of Engineer-in-charge. Manufacturer’s specification and drawing. Plain PVC door shutters.
13
26338
2026
3007210, 18.28, Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 …...outlet and overflow pipes but without fittings and the base support for tank
2500
17500
7
3008184, 5.1.1.1, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Light point/fan points.Primary short point. (Using modular accessories)
50
13400
268
3008185, 5.1.1.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Light point/fan points.Primary medium point. (Using modular accessories)
60
28260
471
3008186, 5.1.1.3, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Light point/fan points.Primary long point. (Using modular accessories)
30
20610
687
3008191, 5.1.3.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- 3 Pin 6 Amp socket outlet on separate board Medium point. (Using modular accessories)
15
9000
600
Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Call bell/buzzer points Medium point. (Using modular accessories)
5
2125
425
3008199, 5.2 Point wiring (excluding metallic switch box & sheet but including switches, sockets) for 3 pin 6 Amp. socket outlet point with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated copper earth continuity conductor of green colour inside casing & capping with required materials as per specification on same board. .(Using modular accessories)
60
13440
224
3008180, 5.3.1, Wiring for circuit wiring with PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping of ISI marked suitable size etc. as required as per specification 2x2.5 Sq.mm ( Using flush type normal accessories)
250
17750
71
3008274, 10.1.1.2, Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in surface rigid P.V.C. casing and caping ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside capping, screwless connector for joints as per specification for :- On separate board Medium point. (Using modular accessories)
10
9490
949
3008275, 10.1.1.3, Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in surface rigid P.V.C. casing and caping ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside capping, screwless connector for joints as per specification for :- On separate board Long point. (Using modular accessories)
10
13720
1372
3009107, 27.8.1.2, Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- Single pole MCB SP 6Amp to 32Amp 10kA rating
15
2040
136
3009249, 27.23.1.1, Supply & fixing of approved make accepted standard sheet steel enclosure (dust protected) duly powder coated paint neutral bar suitable for MCB/RCBOs/MCCB of capacity as required etc. complete as per specification (exclusive of M.C.B./ MCCB/RCBOs) For MCB SP enclosure
5
1035
207
3009366, 29.25.2, Supply and fixing of approved make step type modular electronic fan regulator including connection etc. as required on existing board 100 Watt (2 module)
15
5850
390
3008368, 18.3.1, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-1 Or 2 Module PVC box
10
760
76
3008370, 18.3.3, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-4 Module PVC box
20
2080
104
3008371, 18.3.4, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-6 Module PVC box
10
1380
138
3007524 ,22.14.1,Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)
5
32845
6569
3006376 ,14.65,Providing & casting & Repairing of excessively damaged members
with micro-concrete at all levels with all leads & lift or as directed including formwork, centering, scaffolding, and mixing, laying, levelling, and finishing including curing etc. complete (excluding steel reinforcement
10
610
61
3006415 ,14.80.1,Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: easurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2)-12 mm average thickness
110
21450
195
3007534 ,22.22,Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of(i) Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely.(ii) Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80%-chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2ndcoat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow thecoating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per anufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area.(iv) The treated area should be cure with water for 48 hrs. by flooding the surface.(v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee)
110
51150
465
3007542 ,22.3,Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush.
20
1100
55
220 KV S/S Depalpur 3006279, 14.1.1, Repairs to plaster of thickness 12mm to 20mm in patches of area2.5 sq. metres ……... With cement mortar 1:4 (1 cement : 4 sand).
600
108000
180
3004996, 6.6.2, Brick work with well brunt open bhatta, bricks, crushing strength not less …. etc complete.Cement Mortar 1:6 (1 cement : 6 sand)
5
21750
4350
3004838, 4.1.2.3, Providing and laying in position cement concrete of …. M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate
6
20844
3474
3004929, 5.16.6, Reinforcement for R.C.C. work including straightening, cutting, bending, placing .....etc. complete . Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 .separately as shown in the drawing and as per ....Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786
200
12580
62.9
3004884, 5.1.1, Providing and laying in position specified grade of reinforced cement concrete (with 20mm ...reinforcement - All work up to plinth level : M-20 Grade Concrete
5
28980
5796
3006325, 14.30, Removing dry or oil bound distemper, water proofing ….. repairs to scratches etc. complete.
750
4500
6
3006206, 13.41, Providing and applying white cement based putty of average thickness……. of APD/Chief Engineer will be required.
750
55500
74
3006924, 18.6.2.2, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply …Charge...Concealed work including cutting chases and making good the walls etc...20 mm nominal outer dia .Pipes.
30
7020
234
3006929, 18.7.3, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,……..testing of joints complete as per direction of Engineer-in- Charge. External Work.25 mm nominal outer dia .Pipes.
25
7200
288
3007138, 18.14.3, Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore
3
1497
499
3007218, 18.34, Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore.
3
2334
778
3007665, 25.45, Providing and fixing in position best Indian Auto Closing 32mm, Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/cartridge). (Premium Range)
3
8166
2722
3006809, 17.61, Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet
6
3102
517
3006644, 17.17.2, Providing and fixing white vitreous china water closet squatting pan (Indian type)..Orissa pattern W.C. pan of size 580x440 mm
3
3966
1322
3006805, 17.59.5.1, Providing and fixing unplasticised PVC moulded fittings/ …..expansion..Bend 87.50..75 mm bend
6
702
117
3004746, 2.6.1, Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas…….and neatly dressed.All kinds of soil
10
1290
129
3007292, 19.4.2, Providing and laying below…..paid seperataly...160 mm diameter OD (min. wall thickness 4.0mm)
35
16695
477
3007291, 19.4.1, Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly...110 mm diameter OD (min. wall thickness 3.2mm)
5
1170
234
3007297, 19.5.2, Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design:..160 mm diameter PVC. pipe
35
24640
704
3007296, 19.5.1, Providing and laying cement concrete 1:3:6 …. bed concrete as per standard design:..110 mm diameter PVC. pipe
5
2880
576
3006033, 12.32.2, Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water... expansion. 110 mm diameter (minimum wall thickness 2.2mm)
18
4284
238
3007366, 19.27.1, "Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with .... complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :..With well burnt bricks"
6
23646
3941
3006637, 17.14.2.1, Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :..Kitchen sink without drain board..610x510 mm bowl depth 200 mm.
3
13749
4583
3005828, 11.22.5, Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in- Charge. Cuddpah stone
8
10232
1279
3005862, 11.41, Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
3
696
232
3005877, 11.51, Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 12 mm thick cement mortar 1:3 (1 Cement : 3 sand) including grouting the joints with white cement and matching pigments etc., complete.
80
55840
698
3005876, 11.50, Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement and matching pigments etc., complete.
15
9660
644
3006816, 17.64.1.1, Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete..Semi rigid pipe..32 mm dia
3
261
87
3006211,13.46, Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work
750
48000
64
3006240, 13.64, Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
100
5300
53
3006285, 14.5.1, Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm
15
10185
679
3007215, 18.31, Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, 15 mm nominal bore.
9
4122
458
3007216, 18.32, Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mm nominal bore.
6
3156
526
3006357, 14.52.1, Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade..Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface.
550
35750
65
3007228,18.43.2, Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :..150 mm diameter
3
465
155
3005212, 9.18.2, Providing and fixing ISI marked flush door shutters ... ...shutter. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
24
56880
2370
3005916, 11.76.1, Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different ….matching pigments etc. complete Plain ivory light shade Size 600X600mm thickness 9-10mm
105
99750
950
3005918, 11.77.1, Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different..... skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) ... complete Plain ivory light shade Size 600X600mm thickness 9-10mm
15
14100
940
3005665, 10.2, Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
100
6900
69
3005535, 9.166.1, Providing and fixing factory made 30 mm thick PVC door shutter consisting of frame made..direction of Engineer-in-charge. Manufacturer’s specification and drawing. Plain PVC door shutters.
7
14182
2026
3007210, 18.28, Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 …...outlet and overflow pipes but without fittings and the base support for tank
1500
10500
7
3008184, 5.1.1.1, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Light point/fan points.Primary short point. (Using modular accessories)
30
8040
268
3008185, 5.1.1.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Light point/fan points.Primary medium point. (Using modular accessories)
36
16956
471
3008186, 5.1.1.3, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Light point/fan points.Primary long point. (Using modular accessories)
18
12366
687
3008191, 5.1.3.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- 3 Pin 6 Amp socket outlet on separate board Medium point. (Using modular accessories)
9
5400
600
3008194, 5.1.4.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Call bell/buzzer points Medium point. (Using modular accessories)
3
1275
425
3008199, 5.2 Point wiring (excluding metallic switch box & sheet but including switches, sockets) for 3 pin 6 Amp. socket outlet point with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated copper earth continuity conductor of green colour inside casing & capping with required materials as per specification on same board. .(Using modular accessories)
36
8064
224
3008180, 5.3.1, Wiring for circuit wiring with PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping of ISI marked suitable size etc. as required as per specification 2x2.5 Sq.mm ( Using flush type normal accessories)
150
10650
71
3008274, 10.1.1.2, Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in surface rigid P.V.C. casing and caping ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside capping, screwless connector for joints as per specification for :- On separate board Medium point. (Using modular accessories)
6
5694
949
3008275, 10.1.1.3, Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in surface rigid P.V.C. casing and caping ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside capping, screwless connector for joints as per specification for :- On separate board Long point. (Using modular accessories)
6
8232
1372
3009107, 27.8.1.2, Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- Single pole MCB SP 6Amp to 32Amp 10kA rating
8
1088
136
3009249, 27.23.1.1, Supply & fixing of approved make accepted standard sheet steel enclosure (dust protected) duly powder coated paint neutral bar suitable for MCB/RCBOs/MCCB of capacity as required etc. complete as per specification (exclusive of M.C.B./ MCCB/RCBOs) For MCB SP enclosure
3
621
207
3009366, 29.25.2, Supply and fixing of approved make step type modular electronic fan regulator including connection etc. as required on existing board 100 Watt (2 module)
9
3510
390
3008368, 18.3.1, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-1 Or 2 Module PVC box
6
456
76
3008370,18.3.3, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-4 Module PVC box
12
1248
104
3008371, 18.3.4, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-6 Module PVC box
12
1656
138
3007524 ,22.14.1,Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)
5
32845
6569
3006376 ,14.65,Providing & casting & Repairing of excessively damaged members
with micro-concrete at all levels with all leads & lift or as directed including formwork, centering, scaffolding, and mixing, laying, levelling, and finishing including curing etc. complete (excluding steel reinforcement
10
610
61
3006415 ,14.80.1,Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: easurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2)-12 mm average thickness
110
21450
195
3007534 ,22.22,Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of(i) Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely.(ii) Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80%-chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2ndcoat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow thecoating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per anufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area.(iv) The treated area should be cure with water for 48 hrs. by flooding the surface.(v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee)
110
51150
465
3007542 ,22.3,Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush.
20
1100
55
Pithampur Sec- I, 3006279, 14.1.1 .Repairs to plaster of thickness 12mm to 20mm in patches of area2.5 sq. metres and ….. dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand).
200
36000
180
3004994, 6.5.2, Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement Mortar 1:6 (1 cement: 6 sand).
2
8310
4155
3006149, 13.3.2, 20 mm cement plaster of mix : 1:6 (1 cement : 6 sand)
50
9850
197
3004838, 4.1.2.3, Providing and laying in position cement concrete of …. M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate
1
3474
3474
3004929, 5.16.6, Reinforcement for R.C.C. work including straightening, cutting, bending, placing .....etc. complete . Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 .separately as shown in the drawing and as per ....Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786
200
12580
62.9
3004884, 5.1.1, Providing and laying in position specified grade of reinforced cement concrete (with 20mm ...reinforcement - All work up to plinth level : M-20 Grade Concrete
5
28980
5796
3004893, 5.9.1, Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for concrete upto plinth level
10
1906
190.6
3006325, 14.30, Removing dry or oil bound distemper, water proofing ….. repairs to scratches etc. complete.
3400
20400
6
3006206, 13.41, Providing and applying white cement based putty of average thickness……. of APD/Chief Engineer will be required.
1000
74000
74
3006924, 18.6.2.2, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply …Charge...Concealed work including cutting chases and making good the walls etc...20 mm nominal outer dia .Pipes.
80
18720
234
3006929, 18.7.3, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,..having thermal stability for hot and cold water supply including all CPVC……. of Engineer-in- Charge. External Work.25 mm nominal outer dia .Pipes.
80
14800
185
3007138, 18.14.3, Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore
8
3992
499
3007218, 18.34, Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore.
4
3112
778
3007665, 25.45, Providing and fixing in position best Indian Auto Closing 32mm, Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/cartridge). (Premium Range)
4
10888
2722
3006809, 17.61, Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet
10
5170
517
3006644, 17.17.2, Providing and fixing white vitreous china water closet squatting pan (Indian type)..Orissa pattern W.C. pan of size 580x440 mm
4
5288
1322
3006805, 17.59.5.1, Providing and fixing unplasticised PVC moulded fittings/ …..expansion..Bend 87.50..75 mm bend
8
936
117
3006040, 12.33.3.2, Providing and fixing on wall face Unplasticised - UPVC moulded fittings/ accessories for ….. Single tee with door 110x110x110 mm (minimum wall thickness 2.2mm)
4
704
176
3006806,17.59.5.2, Providing and fixing unplasticised PVC moulded fittings/ …..expansion..Bend 87.50....110 mm bend
12
2064
172
3004746, 2.6.1, Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas…….and neatly dressed.All kinds of soil
5
645
129
3007292,19.4.2, Providing and laying below…..paid seperataly...160 mm diameter OD (min. wall thickness 4.0mm)
30
14310
477
3007291, 19.4.1, Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly...110 mm diameter OD (min. wall thickness 3.2mm)
5
1170
234
3007297, 19.5.2, Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design:..160 mm diameter PVC. pipe
30
21120
704
3007296, 19.5.1, Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design:..110 mm diameter PVC. pipe
5
2880
576
3006033, 12.32.2, Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter (minimum wall thickness 2.2mm)
5
1190
238
3007366, 19.27.1, "Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with .... complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :..With well burnt bricks"
2
7882
3941
3006637, 17.14.2.1, Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as …..required :..Kitchen sink without drain board..610x510 mm bowl depth 200 mm.
4
18332
4583
3005828, 11.22.5 Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in- Charge. Cuddpah stone
15
19185
1279
3005862, 11.41, Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
4
928
232
3005877, 11.51, Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 12 mm thick cement mortar 1:3 (1 Cement : 3 sand) including grouting the joints with white cement and matching pigments etc., complete.
80
55840
698
3005876, 11.50, Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement and matching pigments etc., complete.
20
12880
644
3006816, 17.64.1.1,Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete..Semi rigid pipe..32 mm dia
8
696
87
3006211, 13.46, Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work
1000
64000
64
3006240, 13.64, Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
150
7950
53
3007215, 18.31, Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, 15 mm nominal bore.
15
6870
458
3007216, 18.32, Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mm nominal bore.
12
6312
526
3006357, 14.52.1, Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade..Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface.
2400
156000
65
3007228, 18.43.2, Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :..150 mm diameter
4
620
155
3006622, 17.11.4, Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. …..:White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.
6
9984
1664
3005212, 9.18.2, Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) ...shutter. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
20
47400
2370
3005856, 11.37.1, Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 ….. shade of the slabs, including rubbing and polishing complete. 10-12 mm thick
15
14130
942
3005872, 11.46, Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
35
1365
39
3005916, 11.76.1, Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption….Plain ivory light shade Size 600X600mm thickness 9-10mm
150
142500
950
3005918, 11.77.1, Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption... 1st quality/ premium quality in skirting laid on 12mm thick... and matching pigments etc. complete Plain ivory light shade Size 600X600mm thickness 9-10mm
20
18800
940
3007210, 18.28, Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
4000
28000
7
3005665, 10.2, Structural steel work using M.S. flats, angles, channels I-section, H-section etc…. in position and applying a priming coat of approved steel primer all complete.
200
13800
69
3005535, 9.166.1, Providing and fixing factory made 30 mm thick PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for ........ side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification and drawing. Plain PVC door shutters.
12
24312
2026
3005704, 10.21, Welding by gas or electric plant including transportation of plant at site etc. complete.
500
2500
5
3005899, 11.66, Providing and laying factory made machine pressed precast cement concrete interlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness, M-30 grade with grey cement and pigment all as specified. Made by block making machine with strong vibratory compaction, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in-Charge.
100
58600
586
3006650, 17.22.1, Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. 10 litre capacity..White
5
4725
945
3006662, 17.29.2, Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :..Flat back wash basin of size 550x400mm.
7
5999
857
3008184, 5.1.1.1, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Light point/fan points.Primary short point. (Using modular accessories)
52
13936
268
3008185, 5.1.1.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Light point/fan points.Primary medium point. (Using modular accessories)
160
75360
471
3008186, 5.1.1.3, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Light point/fan points.Primary long point. (Using modular accessories)
16
10992
687
3008191, 5.1.3.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- 3 Pin 6 Amp socket outlet on separate board Medium point. (Using modular accessories)
24
14400
600
3008194, 5.1.4.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Call bell/buzzer points Medium point. (Using modular accessories)
8
3400
425
3008199, 5.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets) for 3 pin 6 Amp. socket outlet point with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated copper earth continuity conductor of green colour inside casing & capping with required materials as per specification on same board. .(Using modular accessories)
48
10752
224
3008180, 5.3.1, Wiring for circuit wiring with PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping of ISI marked suitable size etc. as required as per specification 2x2.5 Sq.mm ( Using flush type normal accessories)
600
42600
71
3008274, 10.1.1.2, Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in surface rigid P.V.C. casing and caping ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside capping, screwless connector for joints as per specification for :- On separate board Medium point. (Using modular accessories)
20
18980
949
3008275, 10.1.1.3, Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in surface rigid P.V.C. casing and caping ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside capping, screwless connector for joints as per specification for :- On separate board Long point. (Using modular accessories)
16
21952
1372
3009107, 27.8.1.2, Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- Single pole MCB SP 6Amp to 32Amp 10kA rating
32
4352
136
3009249, 27.23.1.1, Supply & fixing of approved make accepted standard sheet steel enclosure (dust protected) duly powder coated paint neutral bar suitable for MCB/RCBOs/MCCB of capacity as required etc. complete as per specification (exclusive of M.C.B./ MCCB/RCBOs) For MCB SP enclosure
8
1656
207
3009366, 29.25.2, Supply and fixing of approved make step type modular electronic fan regulator including connection etc. as required on existing board 100 Watt (2 module)
24
9360
390
3008368, 18.3.1, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-1 Or 2 Module PVC box
16
1216
76
3008370, 18.3.3, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-4 Module PVC box
24
2496
104
3008371, 18.3.4, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-6 Module PVC box
32
4416
138
3007524 ,22.14.1,Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)
15
98535
6569
3006376 ,14.65,Providing & casting & Repairing of excessively damaged members
with micro-concrete at all levels with all leads & lift or as directed including formwork, centering, scaffolding, and mixing, laying, levelling, and finishing including curing etc. complete (excluding steel reinforcement
20
1220
61
3006415 ,14.80.1,Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: easurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2)-12 mm average thickness
300
58500
195
3007534 ,22.22,Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of(i) Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely.(ii) Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80%-chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2ndcoat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow thecoating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per anufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area.
(iv) The treated area should be cure with water for 48 hrs. by flooding the surface.
(v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee)
300
139500
465
3007542 ,22.3,Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush.
50
2750
55
220 KV S/S Pithampur Sec- III (Bagdon),3006279, 14.1.1, Repairs to plaster of thickness 12mm to 20mm in patches of area2.5 sq. metres and ….. dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand).
250
45000
180
3004994, 6.5.2, Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement Mortar 1:6 (1 cement: 6 sand).
1
4155
4155
3004838, 4.1.2.3, Providing and laying in position cement concrete of …. M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate
1
3474
3474
3004929, 5.16.6, Reinforcement for R.C.C. work including straightening, cutting, bending, placing .....etc. complete . Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 .separately as shown in the drawing and as per ....Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786
100
6290
62.9
3004884, 5.1.1, Providing and laying in position specified grade of reinforced cement concrete (with 20mm ...reinforcement - All work up to plinth level : M-20 Grade Concrete
5
28980
5796
3004893, 5.9.1, Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for concrete upto plinth level
10
1906
190.6
3006325, 14.3, Removing dry or oil bound distemper, water proofing ….. repairs to scratches etc. complete.
1000
6000
6
3006206, 13.41, Providing and applying white cement based putty of average thickness……. of APD/Chief Engineer will be required.
1000
74000
74
3006924, 18.6.2.2, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply …Charge...Concealed work including cutting chases and making good the walls etc...20 mm nominal outer dia .Pipes.
70
16380
234
3006929, 18.7.3, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,..having thermal stability for hot and cold water supply including all CPVC……. of Engineer-in- Charge. External Work.25 mm nominal outer dia .Pipes.
50
9250
185
3007138, 18.14.3, Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore
4
1996
499
3007218, 18.34, Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore.
4
3112
778
3007665, 25.45, Providing and fixing in position best Indian Auto Closing 32mm, Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/cartridge). (Premium Range)
4
10888
2722
3006809, 17.61, Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet
8
4136
517
3006644, 17.17.2, Providing and fixing white vitreous china water closet squatting pan (Indian type)..Orissa pattern W.C. pan of size 580x440 mm
4
5288
1322
3006805, 17.59.5.1, Providing and fixing unplasticised PVC moulded fittings/ …..expansion..Bend 87.50..75 mm bend
8
936
117
3006040, 12.33.3.2, Providing and fixing on wall face Unplasticised - UPVC moulded fittings/ accessories for ….. Single tee with door 110x110x110 mm (minimum wall thickness 2.2mm)
4
704
176
3006806, 17.59.5.2, Providing and fixing unplasticised PVC moulded fittings/ …..expansion..Bend 87.50....110 mm bend
12
2064
172
3004746, 2.6.1, Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas…….and neatly dressed.All kinds of soil
5
645
129
3007292, 19.4.2, Providing and laying below…..paid seperataly...160 mm diameter OD (min. wall thickness 4.0mm)
15
7155
477
3006810, 19.4.1, Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly...110 mm diameter OD (min. wall thickness 3.2mm)
5
1170
234
3007297, 19.5.2, Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design:..160 mm diameter PVC. pipe
15
10560
704
3007296, 19.5.1, Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design:..110 mm diameter PVC. pipe
5
2880
576
3006034, 12.32.2, Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter (minimum wall thickness 2.2mm)
5
1190
238
3007366,19.27.1, "Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with .... complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :..With well burnt bricks"
2
7882
3941
3006637, 17.14.2.1, Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as …..required :..Kitchen sink without drain board..610x510 mm bowl depth 200 mm.
4
18332
4583
3005828, 11.22.5, Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in- Charge. Cuddpah stone
15
19185
1279
3005862, 11.41, Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
4
928
232
3005877, 11.51, Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 12 mm thick cement mortar 1:3 (1 Cement : 3 sand) including grouting the joints with white cement and matching pigments etc., complete.
80
55840
698
3005876, 11.50, Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement and matching pigments etc., complete.
20
12880
644
3006816, 17.64.1.1, Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete..Semi rigid pipe..32 mm dia
8
696
87
3006211, 13.46, Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work
1000
64000
64
3006822, 13.64, Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
100
5300
53
3007215, 18.31, Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, 15 mm nominal bore.
12
5496
458
3007216, 18.32, Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mm nominal bore.
10
5260
526
3006357, 14.52.1, Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade..Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface.
1200
78000
65
3007228, 18.43.2, Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :..150 mm diameter
4
620
155
3006622, 17.11.4, Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. …..:White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.
6
9984
1664
3005212, 9.18.2, Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) ...shutter. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
20
47400
2370
3005916, 11.76.1, Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption….Plain ivory light shade Size 600X600mm thickness 9-10mm
150
142500
950
3005918, 11.77.1, Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption... 1st quality/ premium quality in skirting laid on 12mm thick... and matching pigments etc. complete Plain ivory light shade Size 600X600mm thickness 9-10mm
20
18800
940
3007210, 18.28, Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
2000
14000
7
3005665, 10.2, Structural steel work using M.S. flats, angles, channels I-section, H-section etc…. in position and applying a priming coat of approved steel primer all complete.
100
6900
69
3005535, 9.166.1, Providing and fixing factory made 30 mm thick PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for ........ side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification and drawing. Plain PVC door shutters.
12
24312
2026
3006650, 17.22.1, Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. 10 litre capacity..White
4
3780
945
3006662, 17.29.2, Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :..Flat back wash basin of size 550x400mm.
4
3428
857
3008164, 5.1.1.1, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Light point/fan points.Primary short point. (Using modular accessories)
40
10720
268
3008185,5.1.1.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Light point/fan points.Primary medium point. (Using modular accessories)
48
22608
471
3008186, 5.1.1.3, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Light point/fan points.Primary long point. (Using modular accessories)
16
10992
687
3008191, 5.1.3.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- 3 Pin 6 Amp socket outlet on separate board Medium point. (Using modular accessories)
12
7200
600
3008194, 5.1.4.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Call bell/buzzer points Medium point. (Using modular accessories)
4
1700
425
3008199, 5.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets) for 3 pin 6 Amp. socket outlet point with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated copper earth continuity conductor of green colour inside casing & capping with required materials as per specification on same board. .(Using modular accessories)
24
5376
224
3008200, 5.3.1, Wiring for circuit wiring with PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping of ISI marked suitable size etc. as required as per specification 2x2.5 Sq.mm ( Using flush type normal accessories)
200
14200
71
3008274, 10.1.1.2, Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in surface rigid P.V.C. casing and caping ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside capping, screwless connector for joints as per specification for :- On separate board Medium point. (Using modular accessories)
8
7592
949
3008275, 10.1.1.3, Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in surface rigid P.V.C. casing and caping ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside capping, screwless connector for joints as per specification for :- On separate board Long point. (Using modular accessories)
9
12348
1372
3009107, 27.8.1.2, Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- Single pole MCB SP 6Amp to 32Amp 10kA rating
12
1632
136
3009249, 27.23.1.1, Supply & fixing of approved make accepted standard sheet steel enclosure (dust protected) duly powder coated paint neutral bar suitable for MCB/RCBOs/MCCB of capacity as required etc. complete as per specification (exclusive of M.C.B./ MCCB/RCBOs) For MCB SP enclosure
4
828
207
3009366, 29.25.2, Supply and fixing of approved make step type modular electronic fan regulator including connection etc. as required on existing board 100 Watt (2 module)
12
4680
390
3006848, 18.3.1, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-1 Or 2 Module PVC box
12
912
76
3006849, 18.3.2, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-3 Module PVC box
10
940
94
3006850, 18.3.3, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-4 Module PVC box
8
832
104
3006851, 18.3.4, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-6 Module PVC box
8
1104
138
3007524 ,22.14.1,Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)
15
98535
6569
3006376 ,14.65,Providing & casting & Repairing of excessively damaged members
with micro-concrete at all levels with all leads & lift or as directed including formwork, centering, scaffolding, and mixing, laying, levelling, and finishing including curing etc. complete (excluding steel reinforcement
20
1220
61
3006415 ,14.80.1,Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: easurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2)-12 mm average thickness
200
39000
195
3007534 ,22.22,Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of(i) Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely.(ii) Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80%-chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2ndcoat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the
coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per anufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1
st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area.
(iv) The treated area should be cure with water for 48 hrs. by flooding the surface.
(v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee)
200
93000
465
3007542 ,22.3,Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush.
25
1375
55
132 KV S/S Colony Dhamnod, 3006279, 14.1.1, Repairs to plaster of thickness 12mm to 20mm in patches of area2.5 sq. metres and ….. dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand).
400
72000
180
3004994, 6.5.2, Brick work with well brunt open bhatta, bricks, …..foundation and plinth i/c curing etc complete. Cement Mortar 1:6 (1 cement: 6 sand).
4
16620
4155
3004838, 4.1.2.3, Providing and laying in position cement concrete of …. M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate
5
17370
3474
3004929, 5.16.6, Reinforcement for R.C.C. work including straightening, cutting, bending, placing .....etc. complete . Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 .separately as shown in the drawing and as per ....Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786
150
9435
62.9
3004884,5.1.1, Providing and laying in position specified grade of reinforced cement concrete (with 20mm ...reinforcement - All work up to plinth level : M-20 Grade Concrete
5
28980
5796
3004893, 5.9.1, Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for concrete upto plinth level
10
1906
190.6
3004894, 5.9.2, Centering and shuttering in cluding strutting, propping etc. and removal of form for: Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. Uptoplinthlevel.
30
6570
219
3004897, 5.9.3, Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform.
16
7033
439.6
3006494, 15.40, Dismantling G.I. pipes (external work) including excavation and refilling trenches…..-Charge :.15 mm to 40 mm nominal bore
350
14000
40
3006325, 14.30, Removing dry or oil bound distemper, water proofing ….. repairs to scratches etc. complete.
1200
7200
6
3006206, 13.41, Providing and applying white cement based putty of average thickness……. of APD/Chief Engineer will be required.
750
55500
74
3006924, 18.6.2.2, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply …Charge...Concealed work including cutting chases and making good the walls etc...20 mm nominal outer dia .Pipes.
80
18720
234
3006931,18.7.5, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,..having thermal stability for hot and cold water supply including all CPVC……..of Engineer-in- Charge. External Work..40 mm nominal outer dia .Pipes.
200
64800
324
3006929, 18.7.3, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,..having thermal stability for hot and cold water supply including all CPVC……. of Engineer-in- Charge. External Work.25 mm nominal outer dia .Pipes.
100
18500
185
3007138, 18.14.3, Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore
6
2994
499
3007218, 18.34, Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore.
3
2334
778
3007665, 25.45, Providing and fixing in position best Indian Auto Closing 32mm, Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/cartridge). (Premium Range)
3
8166
2722
3006809, 17.61, Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet
4
2068
517
3006644, 17.17.2, Providing and fixing white vitreous china water closet squatting pan (Indian type)..Orissa pattern W.C. pan of size 580x440 mm
3
3966
1322
3006805,17.59.5.1, Providing and fixing unplasticised PVC moulded fittings/ …..expansion..Bend 87.50..75 mm bend
6
702
117
3006040, 12.33.3.2, Providing and fixing on wall face Unplasticised - UPVC moulded fittings/ accessories for ….. Single tee with door 110x110x110 mm (minimum wall thickness 2.2mm)
3
528
176
3006806, 17.59.5.2, Providing and fixing unplasticised PVC moulded fittings/ …..expansion..Bend 87.50....110 mm bend
12
2064
172
3004746, 2.6.1, Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas…….and neatly dressed.All kinds of soil
10
1290
129
3007292, 19.4.2, Providing and laying below…..paid seperataly...160 mm diameter OD (min. wall thickness 4.0mm)
50
23850
477
3007291,19.4.1, Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly...110 mm diameter OD (min. wall thickness 3.2mm)
10
2340
234
3007297, 19.5.2, Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design:..160 mm diameter PVC. pipe
50
35200
704
3007296, 19.5.1, Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design:..110 mm diameter PVC. pipe
10
5760
576
3006033, 12.32.2, Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter (minimum wall thickness 2.2mm)
20
4760
238
3007366, 19.27.1, "Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with .... complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :..With well burnt bricks"
5
19705
3941
3006637, 17.14.2.1, Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :..Kitchen sink without drain board..610x510 mm bowl depth 200 mm.
3
13749
4583
3005828, 11.22.5, Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in- Charge. Cuddpah stone
15
19185
1279
3005862, 11.41, Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
4
928
232
3005877, 11.51, Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 12 mm thick cement mortar 1:3 (1 Cement : 3 sand) including grouting the joints with white cement and matching pigments etc., complete.
100
69800
698
3005876, 11.50, Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement and matching pigments etc., complete.
15
9660
644
3006816, 17.64.1.1, Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete..Semi rigid pipe..32 mm dia
4
348
87
3006211, 13.46, Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work
750
48000
64
3006240, 13.64, Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
75
3975
53
3006289, 14.7.1, Renewing glass panes and refixing existing wooden fillets: Float glass panes of thickness 4 mm
20
13940
697
3006291, 14.8.1, Supplying and fixing new wooden fillets wherever necessary: 2nd class teak wood fillets
100
3000
30
3007215, 18.31, Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, 15 mm nominal bore.
9
4122
458
3007216, 18.32, Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mm nominal bore.
6
3156
526
3006357, 14.52.1, Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade..Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface.
750
48750
65
3007228, 18.43.2, Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :..150 mm diameter
3
465
155
3006622, 17.11.4, Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. …..:White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.
3
4992
1664
3005212, 9.18.2, Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) ...shutter. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
24
56880
2370
3005856, 11.37.1, Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 ….. shade of the slabs, including rubbing and polishing complete. 10-12 mm thick
10
9420
942
3005872, 11.46, Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
40
1560
39
3005916, 11.76.1, Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption….Plain ivory light shade Size 600X600mm thickness 9-10mm
120
114000
950
3005918, 11.77.1, Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption... 1st quality/ premium quality in skirting laid on 12mm thick... and matching pigments etc. complete Plain ivory light shade Size 600X600mm thickness 9-10mm
8
7520
940
3007210, 18.28, Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
1500
10500
7
3005665,10.2, Structural steel work using M.S. flats, angles, channels I-section, H-section etc…. in position and applying a priming coat of approved steel primer all complete.
150
10350
69
3005535, 9.166.1, Providing and fixing factory made 30 mm thick PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for ........ side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification and drawing. Plain PVC door shutters.
9
18234
2026
3009712, 39.9.1 Electric, Supplying & installation of approved make required capacity 3 phase, 50 Hz, 415V, centrifugal mono-block pump, with starter i/c single phase preventer, connections, base channel foundation etc. as required as per specifications but excluding pipe and connection cable.3.0 HP head metre 6-15, discharge LPM 1200-1000
1
24000
24000
3009699, 39.3.2, Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make. 4.0 sq.mm multi strand
50
5800
116
3008184, 5.1.1.1, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Light point/fan points.Primary short point. (Using modular accessories)
12
3216
268
3008185, 5.1.1.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Light point/fan points.Primary medium point. (Using modular accessories)
36
16956
471
3008186, 5.1.1.3, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Light point/fan points.Primary long point. (Using modular accessories)
6
4122
687
3008191, 5.1.3.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- 3 Pin 6 Amp socket outlet on separate board Medium point. (Using modular accessories)
9
5400
600
3008194, 5.1.4.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Call bell/buzzer points Medium point. (Using modular accessories)
3
1275
425
3008199, 5.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets) for 3 pin 6 Amp. socket outlet point with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated copper earth continuity conductor of green colour inside casing & capping with required materials as per specification on same board. .(Using modular accessories)
9
2016
224
3008180, 5.3.1, Wiring for circuit wiring with PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping of ISI marked suitable size etc. as required as per specification 2x2.5 Sq.mm ( Using flush type normal accessories)
150
10650
71
3008274, 10.1.1.2, Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in surface rigid P.V.C. casing and caping ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside capping, screwless connector for joints as per specification for :- On separate board Medium point. (Using modular accessories)
6
5694
949
3008275, 10.1.1.3, Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in surface rigid P.V.C. casing and caping ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside capping, screwless connector for joints as per specification for :- On separate board Long point. (Using modular accessories)
6
8232
1372
3009107, 27.8.1.2, Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- Single pole MCB SP 6Amp to 32Amp 10kA rating
9
1224
136
3009249, 27.23.1.1, Supply & fixing of approved make accepted standard sheet steel enclosure (dust protected) duly powder coated paint neutral bar suitable for MCB/RCBOs/MCCB of capacity as required etc. complete as per specification (exclusive of M.C.B./ MCCB/RCBOs) For MCB SP enclosure
3
621
207
3009366, 29.25.2, Supply and fixing of approved make step type modular electronic fan regulator including connection etc. as required on existing board 100 Watt (2 module)
9
3510
390
3008368, 18.3.1, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-1 Or 2 Module PVC box
6
456
76
3008370, 18.3.3, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-4 Module PVC box
6
624
104
3008371, 18.3.4, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-6 Module PVC box
6
828
138
3007524 ,22.14.1,Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)
15
98535
6569
3006376 ,14.65,Providing & casting & Repairing of excessively damaged members
with micro-concrete at all levels with all leads & lift or as directed including formwork, centering, scaffolding, and mixing, laying, levelling, and finishing including curing etc. complete (excluding steel reinforcement
20
1220
61
3006415 ,14.80.1,Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: easurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2)-12 mm average thickness
300
58500
195
3007534 ,22.22,Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of(i) Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely.(ii) Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80%-chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2ndcoat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the
coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per anufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1
st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area.
(iv) The treated area should be cure with water for 48 hrs. by flooding the surface.
(v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee)
300
139500
465
3007542 ,22.3,Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush.
50
2750
55
400 KV S/S Colony Indore, 3006279, 14.1.1, Repairs to plaster of thickness 12mm to 20mm in patches of area2.5 sq. metres and ….. dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand).
3500
630000
180
3004994, 6.5.2, Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement Mortar 1:6 (1 cement: 6 sand).
20
83100
4155
3006149, 13.3.2, 20 mm cement plaster of mix : 1:6 (1 cement : 6 sand)
350
68950
197
3004838, 4.1.2.3, Providing and laying in position cement concrete of …. M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate
10
34740
3474
3004929, 5.16.6, Reinforcement for R.C.C. work including straightening, cutting, bending, placing .....etc. complete . Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 .separately as shown in the drawing and as per ....Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786
1200
75480
62.9
3004884, 5.1.1, Providing and laying in position specified grade of reinforced cement concrete (with 20mm ...reinforcement - All work up to plinth level : M-20 Grade Concrete
15
86940
5796
3006494, 15.40, Dismantling G.I. pipes (external work) including excavation and refilling trenches…..-Charge :.15 mm to 40 mm nominal bore
480
19200
40
3006325, 14.30, Removing dry or oil bound distemper, water proofing ….. repairs to scratches etc. complete.
2800
16800
6
3006206, 13.41, Providing and applying white cement based putty of average thickness……. of APD/Chief Engineer will be required.
4250
314500
74
3006923, 18.6.2.1, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge...Concealed work including cutting chases and making good the walls etc...15 mm nominal outer dia .Pipes.
200
41400
207
3006924, 18.6.2.2, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply Charge… Concealed work including cutting chases and making good the walls etc...20 mm nominal outer dia .Pipes.
80
18720
234
3007137, 18.14.2, Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :..20 mm nominal bore
20
8620
431
3007218, 18.34, Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore.
20
15560
778
3006650, 17.22.1, Providing and fixing in position best Indian Auto Closing 32mm, Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/cartridge). (Premium Range)
20
18900
945
3006809, 17.61, Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet
52
26884
517
3006644, 17.17.2, Providing and fixing white vitreous china water closet squatting pan (Indian type)..Orissa pattern W.C. pan of size 580x440 mm
20
26440
1322
3006805, 17.59.5.1, Providing and fixing unplasticised PVC moulded fittings/ …..expansion..Bend 87.50..75 mm bend
30
3510
117
3006040, 12.33.3.2, Providing and fixing on wall face Unplasticised - UPVC moulded fittings/ accessories for ….. Single tee with door 110x110x110 mm (minimum wall thickness 2.2mm)
20
3520
176
3006806, 17.59.5.2, Providing and fixing unplasticised PVC moulded fittings/ …..expansion..Bend 87.50....110 mm bend
55
9460
172
3004746, 2.6.1, Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas…….and neatly dressed.All kinds of soil
12
1548
129
3007292, 19.4.2, Providing and laying below…..paid seperataly...160 mm diameter OD (min. wall thickness 4.0mm)
100
47700
477
3007291,19.4.1, Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly...110 mm diameter OD (min. wall thickness 3.2mm)
20
4680
234
3007297, 19.5.2, Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design:..160 mm diameter PVC. pipe
100
70400
704
3007296, 19.5.1, Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design:..110 mm diameter PVC. pipe
20
11520
576
3006033, 12.32.2, Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter (minimum wall thickness 2.2mm)
20
4760
238
3007319, 19.9.1.1, "Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :..With well burnt bricks"
15
119955
7997
3006637, 17.14.2.1, Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :..Kitchen sink without drain board..610x510 mm bowl depth 200 mm.
17
77911
4583
3005828, 11.22.5, Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in- Charge. Cuddpah stone
90
115110
1279
3005860, 11.39.2, Providing edge moulding to 18mm thick marble stone counters, Vanities, window sills etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work.
255
68595
269
3005862, 11.41, Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
17
3944
232
3005877, 11.51, Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 12 mm thick cement mortar 1:3 (1 Cement : 3 sand) including grouting the joints with white cement and matching pigments etc., complete.
700
488600
698
3005876, 11.50, Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement and matching pigments etc., complete.
90
57960
644
3006816, 17.64.1.1, Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete..Semi rigid pipe..32 mm dia
17
1479
87
3006211, 13.46, Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work
4700
300800
64
3006240, 13.64, Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
1010
53530
53
3006289, 14.7.1, Renewing glass panes and refixing existing wooden fillets: Float glass panes of thickness 4 mm
22
15334
697
3006291, 14.8.1, Supplying and fixing new wooden fillets wherever necessary: 2nd class teak wood fillets
200
6000
30
3007215, 18.31, Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, 15 mm nominal bore.
50
22900
458
3007216, 18.32, Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mm nominal bore.
50
26300
526
3006357, 14.52.1, Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade..Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface.
3300
214500
65
3006622, 17.11.4, Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. …..:White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.
17
28288
1664
3005212, 9.18.2, Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) ...shutter. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
80
189600
2370
3005856, 11.37.1, Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 ….. shade of the slabs, including rubbing and polishing complete. 10-12 mm thick
15
14130
942
3005916, 11.76.1, Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption….Plain ivory light shade Size 600X600mm thickness 9-10mm
700
665000
950
3005918, 11.77.1, Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption... 1st quality/ premium quality in skirting laid on 12mm thick... and matching pigments etc. complete Plain ivory light shade Size 600X600mm thickness 9-10mm
50
47000
940
3007210, 18.28, Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
8000
56000
7
Structural steel work using M.S. flats, angles, channels I-section, H-section etc…. in position and applying a priming coat of approved steel primer all complete.
100
6900
69
Providing and fixing factory made 30 mm thick PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for ........ side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification and drawing. Plain PVC door shutters.
20
40520
2026
3008184, 5.1.1.1, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Light point/fan points.Primary short point. (Using modular accessories)
75
20100
268
3008185, 5.1.1.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Light point/fan points.Primary medium point. (Using modular accessories)
200
94200
471
3008186, 5.1.1.3, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Light point/fan points.Primary long point. (Using modular accessories)
22
15114
687
3008191, 5.1.3.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- 3 Pin 6 Amp socket outlet on separate board Medium point. (Using modular accessories)
35
21000
600
3008194, 5.1.4.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Call bell/buzzer points Medium point. (Using modular accessories)
12
5100
425
3008199,5.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets) for 3 pin 6 Amp. socket outlet point with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated copper earth continuity conductor of green colour inside casing & capping with required materials as per specification on same board. .(Using modular accessories)
130
29120
224
3008180, 5.3.1, Wiring for circuit wiring with PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping of ISI marked suitable size etc. as required as per specification 2x2.5 Sq.mm ( Using flush type normal accessories)
1000
71000
71
3008274, 10.1.1.2, Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in surface rigid P.V.C. casing and caping ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside capping, screwless connector for joints as per specification for :- On separate board Medium point. (Using modular accessories)
28
26572
949
3008275, 10.1.1.3, Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in surface rigid P.V.C. casing and caping ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside capping, screwless connector for joints as per specification for :- On separate board Long point. (Using modular accessories)
22
30184
1372
3009107, 27.8.1.2, Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- Single pole MCB SP 6Amp to 32Amp 10kA rating
35
4760
136
3009249, 27.23.1.1, Supply & fixing of approved make accepted standard sheet steel enclosure (dust protected) duly powder coated paint neutral bar suitable for MCB/RCBOs/MCCB of capacity as required etc. complete as per specification (exclusive of M.C.B./ MCCB/RCBOs) For MCB SP enclosure
12
2484
207
3009366, 29.25.2, Supply and fixing of approved make step type modular electronic fan regulator including connection etc. as required on existing board 100 Watt (2 module)
60
23400
390
3008368, 18.3.1, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-1 Or 2 Module PVC box
25
1900
76
3008369, 18.3.2, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-3 Module PVC box
35
3290
94
3008370, 18.3.3, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-4 Module PVC box
20
2080
104
3008371, 18.3.4, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-6 Module PVC box
40
5520
138
3008372, 18.3.5, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-8/9 Module PVC box
35
6405
183
3008373, 18.3.6, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-12 Module PVC box
25
5575
223
3007524 ,22.14.1,Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)
40
262760
6569
3006376 ,14.65,Providing & casting & Repairing of excessively damaged members
with micro-concrete at all levels with all leads & lift or as directed including formwork, centering, scaffolding, and mixing, laying, levelling, and finishing including curing etc. complete (excluding steel reinforcement
50
3050
61
3006415 ,14.80.1,Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: easurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2)-12 mm average thickness
800
156000
195
3007534 ,22.22,Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of(i) Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely.(ii) Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80%-chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2ndcoat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the
coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per anufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1
st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area.
(iv) The treated area should be cure with water for 48 hrs. by flooding the surface.
(v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee)
800
372000
465
3007542 ,22.3,Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush.
200
11000
55
220 KV S/S South Zone Colony Indore, 3006279, 14.1.1, Repairs to plaster of thickness 12mm to 20mm in patches of area2.5 sq. metres and ….. dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand).
2000
360000
180
3006144, 13.1.1, 12 mm cement plaster of mix : 1:4 (1 cement : 4 sand)
300
44700
149
3006149, 13.3.2, 20 mm cement plaster of mix : 1:6 (1 cement : 6 sand)
500
98500
197
3007515, 22.50, "Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a).......joints, corners, junctions of pipes and masonry with polymer mixed slurry."
20
4140
207
3006435, 15.2.1, Demolishing cement concrete manually/by..Engineer-in- Charge: Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).
10
5780
578
3004740, 2.3, Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
25000
53250
2.13
3006455, 15.14.1, Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below.
80
6800
85
3004838, 4.1.2.3, Providing and laying in position cement concrete of …. M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate
10
34740
3474
3004929, 5.16.6, Reinforcement for R.C.C. work including straightening, cutting, bending, placing .....etc. complete . Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 .separately as shown in the drawing and as per ....Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786
800
50320
62.9
3004884, 5.1.1, Providing and laying in position specified grade of reinforced cement concrete (with 20mm ...reinforcement - All work up to plinth level : M-20 Grade Concrete
24
139104
5796
3006494, 15.40, Dismantling G.I. pipes (external work) including excavation and refilling trenches…..-Charge :.15 mm to 40 mm nominal bore
400
16000
40
3006325, 14.30, Removing dry or oil bound distemper, water proofing ….. repairs to scratches etc. complete.
4670
28020
6
3006206, 13.41, Providing and applying white cement based putty of average thickness……. of APD/Chief Engineer will be required.
4000
296000
74
3006923, 18.6.2.1, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge...Concealed work including cutting chases and making good the walls etc...15 mm nominal outer dia .Pipes.
200
41400
207
3006924, 18.6.2.2, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply Charge… Concealed work including cutting chases and making good the walls etc...20 mm nominal outer dia .Pipes.
120
28080
234
3007136, 18.14.1, Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :..15 mm nominal bore
20
6320
316
3007218, 18.34, Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore.
20
15560
778
3007665, 25.45, Providing and fixing in position best Indian Auto Closing 32mm, Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/cartridge). (Premium Range)
20
54440
2722
3006809, 17.61, Providing and fixing UPVC trap of self cleaning ..wall and floors. 100 mm inlet and 75 mm outlet
52
26884
517
3006644, 17.17.2, Providing and fixing white vitreous china water closet squatting pan (Indian type)..Orissa pattern W.C. pan of size 580x440 mm
20
26440
1322
3006805, 17.59.5.1, Providing and fixing unplasticised PVC moulded fittings/ …..expansion..Bend 87.50..75 mm bend
30
3510
117
3006040, 12.33.3.2, Providing and fixing on wall face Unplasticised - UPVC moulded fittings/ accessories for ….. Single tee with door 110x110x110 mm (minimum wall thickness 2.2mm)
20
3520
176
3006806, 17.59.5.2, Providing and fixing unplasticised PVC moulded fittings/ …..expansion..Bend 87.50....110 mm bend
55
9460
172
3004746, 2.6.1, Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas…….and neatly dressed.All kinds of soil
24
3096
129
3007292, 19.4.2, Providing and laying below…..paid seperataly...160 mm diameter OD (min. wall thickness 4.0mm)
100
47700
477
3007291, 19.4.1, Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly...110 mm diameter OD (min. wall thickness 3.2mm)
20
4680
234
3007297, 19.5.2, Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design:..160 mm diameter PVC. pipe
100
70400
704
3007296, 19.5.1, Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design:..110 mm diameter PVC. pipe
20
11520
576
3006033, 12.32.2, Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes….expansion. 110 mm diameter (minimum wall thickness 2.2mm)
20
4760
238
3007319,19.9.1.1, "Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :..With well burnt bricks"
25
199925
7997
3006637, 17.14.2.1, Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :..Kitchen sink without drain board..610x510 mm bowl depth 200 mm.
17
77911
4583
3005828, 11.22.5, Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in- Charge. Cuddpah stone
90
115110
1279
3005862, 11.41, Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
17
3944
232
3005877, 11.51, Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 12 mm thick cement mortar 1:3 (1 Cement : 3 sand) including grouting the joints with white cement and matching pigments etc., complete.
650
453700
698
3005876, 11.50, Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement and matching pigments etc., complete.
80
51520
644
3006816, 17.64.1.1, Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete..Semi rigid pipe..32 mm dia
17
1479
87
3006211, 13.46, Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work
4700
300800
64
3005535, 9.166.1, Providing and fixing factory made 30 mm thick PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on both side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10mm (5mmx2) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail and bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles and rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification and drawing. Plain PVC door shutters.
20
40520
2026
3006240, 13.64, Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
600
31800
53
3006289, 14.7.1, Renewing glass panes and refixing existing wooden fillets: Float glass panes of thickness 4 mm
20
13940
697
3006291, 14.8.1, Supplying and fixing new wooden fillets wherever necessary: 2nd class teak wood fillets
200
6000
30
3007215, 18.31, Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, 15 mm nominal bore.
50
22900
458
3007216, 18.32, Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mm nominal bore.
50
26300
526
3006357, 14.52.1, Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade..Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface.
3000
195000
65
3006622, 17.11.4, Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm….require :White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.
17
28288
1664
3005212, 9.18.2, Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board ….shutter. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
60
142200
2370
3005856, 11.37.1, Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) ... shade of the slabs, including rubbing and polishing complete. 10-12 mm thick
15
14130
942
3005872, 11.46, Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
45
1755
39
3005916, 11.76.1, Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different ..... including grouting the joints with white cement and matching pigments etc. complete Plain ivory light shade Size 600X600mm thickness 9-10mm
700
665000
950
3005918, 11.77.1, Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption... 1st quality/ premium quality in skirting laid on 12mm thick... and matching pigments etc. complete Plain ivory light shade Size 600X600mm thickness 9-10mm
50
47000
940
3007210, 18.28, Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
8000
56000
7
3005665, 10.2, Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
100
6900
69
3008184, 5.1.1.1, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Light point/fan points.Primary short point. (Using modular accessories)
75
20100
268
3008185, 5.1.1.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Light point/fan points.Primary medium point. (Using modular accessories)
200
94200
471
3008186, 5.1.1.3, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Light point/fan points.Primary long point. (Using modular accessories)
22
15114
687
3008191, 5.1.3.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- 3 Pin 6 Amp socket outlet on separate board Medium point. (Using modular accessories)
35
21000
600
3008194, 5.1.4.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside casing & capping screwless connector for joints etc. as required as per specification for :- Call bell/buzzer points Medium point. (Using modular accessories)
12
5100
425
3008199, 5.2, Point wiring (excluding metallic switch box & sheet but including switches, sockets) for 3 pin 6 Amp. socket outlet point with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping ISI marked of suitable size and 1.5sq. mm. PVC insulated copper earth continuity conductor of green colour inside casing & capping with required materials as per specification on same board. .(Using modular accessories)
130
29120
224
3008180, 5.3.1, Wiring for circuit wiring with PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping of ISI marked suitable size etc. as required as per specification 2x2.5 Sq.mm ( Using flush type normal accessories)
1500
106500
71
3008274, 10.1.1.2, Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in surface rigid P.V.C. casing and caping ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside capping, screwless connector for joints as per specification for :- On separate board Medium point. (Using modular accessories)
35
33215
949
3008275, 10.1.1.3, Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in surface rigid P.V.C. casing and caping ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside capping, screwless connector for joints as per specification for :- On separate board Long point. (Using modular accessories)
25
34300
1372
3009107, 27.8.1.2, Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- Single pole MCB SP 6Amp to 32Amp 10kA rating
40
5440
136
3009249, 27.23.1.1, Supply & fixing of approved make accepted standard sheet steel enclosure (dust protected) duly powder coated paint neutral bar suitable for MCB/RCBOs/MCCB of capacity as required etc. complete as per specification (exclusive of M.C.B./ MCCB/RCBOs) For MCB SP enclosure
15
3105
207
3009366, 29.25.2, Supply and fixing of approved make step type modular electronic fan regulator including connection etc. as required on existing board 100 Watt (2 module)
65
25350
390
3008368, 18.3.1, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-1 Or 2 Module PVC box
25
1900
76
3008369, 18.3.2, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-3 Module PVC box
35
3290
94
3008370, 18.3.3, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-4 Module PVC box
20
2080
104
3008371, 18.3.4, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-6 Module PVC box
40
5520
138
3008372, 18.3.5, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-8/9 Module PVC box
40
7320
183
3008373, 18.3.6, Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-12 Module PVC box
30
6690
223
3007524 ,22.14.1,Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)
40
262760
6569
3006376 ,14.65,Providing & casting & Repairing of excessively damaged members
with micro-concrete at all levels with all leads & lift or as directed including formwork, centering, scaffolding, and mixing, laying, levelling, and finishing including curing etc. complete (excluding steel reinforcement
50
3050
61
3006415 ,14.80.1,Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: easurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2)-12 mm average thickness
800
156000
195
3007534 ,22.22,Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of(i) Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely.(ii) Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80%-chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2ndcoat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the
coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per anufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1
st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area.
(iv) The treated area should be cure with water for 48 hrs. by flooding the surface.
(v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee)
800
372000
465
3007542 ,22.3,Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush.
200
11000
55
1000557, NOSR Payment of fixed additional charges for Mobilization of men, materials, T&P etc. due to change in location of work from one substation/premises to another substation/premises after 1st sub order for each separate sub-order (s) under the scope of same contract of civil works shall be payable as per following conditions: -(i) Applicable only after 1st sub work order and only on change in work location from one substation/premises to another substation or any other MPPTCL’s premises situated at a distance of more than 3.00 Kms. for execution of work under the same main contract. (Nearest motorable road distance shall be considered for this purpose) (ii) The distance as mentioned in point no. – (i) shall be considered from the nearest current location of ongoing work (where the work shall be in progress by the contractor at the time of placing new sub-order irrespective of scheduled completion period given for that work) under the scope of same contract. (iii) Not applicable for the balance work (when the sub order of any civil work is placed in two or more parts) of dusting, metaling etc. on the same feeder bay work for which the work of foundation etc. has been executed previously under the scope of same contract.(iv) The rates are inclusive of cost of transportation of labour, material, T&P etc. and cost of all respective works in all respect up to any distance in the area of jurisdiction of main work order for the contract and also in nearby areas as per necessity i/c all applicable taxes (except GST) etc. all complete, as per terms and conditions of order and as per direction of Engineer – In – Charge.(Base Rate: - Rs. 10,000/- per shifting) Note:- This payment of fixed additional charges for changing of work location shall be payable only when work will be executed in accordance with location wise priority fixed by the Engineer-In-Charge (if any) and only on successful completion of work in all respect as per scope of work in the sub-order for which said additional charges are to be payable.
5
50000
10000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements