MP Power Transmission Company Limited Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
MP Power Transmission Company Limited - MPPTCL Tender
Civil And Construction
Civil Works Others
Building Construction
Eprocure
Opening Date1 Aug 2024
Closing Date25 Sep 2024
Tender Amount₹ 27,62,000
Costs
EMD
₹ 55,240Document Cost
₹ 1,770Tender Fee
₹ 326
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MPPTC_361206_1Bid Award Id
ViewTender No
689Tender Authority
MP Power Transmission Company Limited ViewPurchaser Address
-Website
http://https://mptenders.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
2.24(SOR w.e.f 01.12.2020)Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
15.31
1102
72
4.1.2.3(SOR w.e.f 01.12.2020)Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 40mm nominal size graded stone aggregate. M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate
17.79
61802
3474
4.1.1.3(SOR w.e.f 01.12.2020)Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 20mm nominal size graded stone aggregate. M-15 - Grade concrete
11.73
52431
4471
11.12 (SOR w.e.f 01.12.2020)Providing and fixing glass strips 40 mm wide and 4 mm thick in joints of terrazo/ cement concrete floors.
132.6
4508
34
4.2.1.3(SOR w.e.f 01.12.2020)Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. upto floor two level, excluding the cost of centering, shuttering and finishing : With 20mm nominal size graded stone aggregate M 15 - Grade concrete
0.46
2168
4714
4.3.2(SOR w.e.f 01.12.2020)Centering and shuttering including strutting, propping etc. and removal of form work for : above plinth: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, and string courses fillets etc.
2.38
634
267
5.16.1(SOR w.e.f 01.12.2020)Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete . (Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on "Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification") : Mild steel and Medium Tensile steel bars.
105.09
6305
60
5.16.6(SOR w.e.f 01.12.2020)Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete . (Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on "Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification")Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786
1209.7
76090
62.9
5.1.1(SOR w.e.f 01.12.2020)Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : M-20 Grade Concrete
15.49
89768
5796
5.9.1(SOR w.e.f 01.12.2020)Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for concrete upto plinth level
84.61
16126
190.6
6.5.2(SOR w.e.f 01.12.2020)Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement Mortar 1:6 (1 cement: 6 sand).
6.5
27011
4155
2.27.1(SOR w.e.f 01.12.2020)Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete. With hard muram having CBR 12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm)
2.98
892
300
5.2.1(SOR w.e.f 01.12.2020)"Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and" string courses, fillets, columns, pillars, posts and struts etc. above plinth level and upto floor two level excluding cost of centering, shuttering, finishing and reinforcement: M-20 Grade Concrete
4.98
29184
5865
5.9.6(SOR w.e.f 01.12.2020)Centering and shuttering including strutting, propping etc. and removal of form for: Columns, P i l l a r s , Piers, Abutments, Posts and Struts.
75.28
35471
471.2
5.3.1(SOR w.e.f 01.12.2020)Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in concrete grade. M-20 Grade Concrete
6.48
39859
6155
5.9.3(SOR w.e.f 01.12.2020)Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform.
10.22
4492
439.6
5.9.5(SOR w.e.f 01.12.2020)Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, girders, bressumers and cantilevers
85.65
30491
356
5.9.19(SOR w.e.f 01.12.2020)Centering and shuttering including strutting, propping etc. and removal of form for:Weather shade, Chajjas, corbels etc., including Edges.
6.58
3513
534.2
5.16.6(SOR w.e.f 01.12.2020)Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete . (Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on "Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification")Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786
708.91
44590
62.9
6.7.2.2(SOR w.e.f 01.12.2020)Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in : Having 75 kg / cm2 average compressive strength. Cement mortar 1:6 (1 cement : 6 sand)
44.61
225245
5049
6.15.2.2(SOR w.e.f 01.12.2020)Half brick masonry with fly ash lime Gypsum bricks (FALG bricks) conforming to IS: 12894, in super structure above plinth and upto floor two level. Having 75 kg/cm2 average compressive strength. Cement mortar 1 : 4 (1 cement : 4 sand)
21.04
10625
505
11.2 (SOR w.e.f 01.12.2020)52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
130.97
52257
399
11. 78.1.1 (SOR w.e.f 01.12.2020)Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, quality/ premium quality in flooring laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished Size 600X600 mm thickness 9-10 mm
30.2
33335
1104
11. 79.1.1 (SOR w.e.f 01.12.2020)Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished (a) Size 600X600 mm thickness 9-10 mm
2.81
3066
1093
11.49 (SOR w.e.f 01.12.2020)Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqmincluding pointing the joints with white cement and matching pigments etc., complete.
40.67
31562
776
11.48 (SOR w.e.f 01.12.2020)Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete.
4.96
3323
670
13.8(SOR w.e.f 01.12.2020)6 mm cement plaster of mix : 1:3 (1 cement : 3 sand)
14.6
1401
96
13.2.2(SOR w.e.f 01.12.2020)15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement : 6 sand)
261.28
38669
148
13.3.2(SOR w.e.f 01.12.2020)20 mm cement plaster of mix : 1:6 (1 cement : 6 sand)
297.6
58626
197
13.5.1(SOR w.e.f 01.12.2020)15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement : 3 sand)
2.56
529
207
88 NSORProviding & fixing 35 to 40 mm thick Polished Cuddappa stone slab for tiers of cup board, ward robe and shelf below kitchen platform fixed with 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointing with cement slurry mixed with suitable plgment to match the approved shade of stone complete including cutting, rubbing, polishing, T&P, taxes, labour, transportation etc, complete as per direction of engineer -in-charge.
54.13
27063
500
9.113.1 (SOR w.e.f 01.12.2020)Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125 mm
8
600
75
9.110.5 (SOR w.e.f 01.12.2020)Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 150x10 mm
16
1104
69
9.110.6 (SOR w.e.f 01.12.2020)Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 100x10 mm
8
440
55
9.109.1 (SOR w.e.f 01.12.2020)Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 300x16 mm
3
723
241
23.3.1(SOR w.e.f 01.12.2020)Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm)
12.06
9332
774
9.1.2 (SOR w.e.f 01.12.2020)Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately). Sal wood
0.17
11837
71309
9.18.2 (SOR w.e.f 01.12.2020)Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
10.62
25171
2370
13.67.1(SOR w.e.f 01.12.2020)Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre.
6.76
189
28
9.48 (SOR w.e.f 01.12.2020)"Providing 40x5 mm flat (iron hold fast 40 cm long) (0.628 kg) including fixing to.frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size)"
30
2850
95
13.41(SOR w.e.f 01.12.2020)Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete.Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required.
575.92
42618
74
13.53(SOR w.e.f 01.12.2020)Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premium exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface)
243.25
31622
130
13.46(SOR w.e.f 01.12.2020)Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work
332.67
21291
64
10.6.1 (SOR w.e.f 01.12.2020)Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to I.S. 4454- part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.25mm M.S. laths with 1.25 mm thick top cover.
7.2
15840
2200
9.43.1 (SOR w.e.f 01.12.2020)Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding.
268.72
24453
91
13.65(SOR w.e.f 01.12.2020)Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
9
693
77
12.32.2(SOR w.e.f 01.12.2020)Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter (minimum wall thickness 2.2mm)
6.3
1499
238
11.66 (SOR w.e.f 01.12.2020)Providing and laying factory made machine pressed precast cement concrete interlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness, M-30 grade with grey cement and pigment all as specified. Made by block making machine with strong vibratory compaction, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in-Charge.
29.68
17392
586
18.28(SOR w.e.f 01.12.2020)Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank+K7078(Unit:-L= Litre)
500
3500
7
18.6.2.1(SOR w.e.f 01.12.2020)Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge...Concealed work including cutting chases and making good the walls etc...15 mm nominal outer dia .Pipes.
8
1656
207
18.6.2.3(SOR w.e.f 01.12.2020)Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge...Concealed work including cutting chases and making good the walls etc.25 mm nominal outer dia .Pipes.
6
1728
288
18.6.2.4(SOR w.e.f 01.12.2020)Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge...Concealed work including cutting chases and making good the walls etc..32 mm nominal outer dia .Pipes.
5
1800
360
18.7.5(SOR w.e.f 01.12.2020)Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,..having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work..40 mm nominal outer dia .Pipes.
1
324
324
18.12.1.2(SOR w.e.f 01.12.2020)Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :..With C.I. wheel of approved quality (screwed end).32 mm nominal bore.
1
558
558
18.12.1.1(SOR w.e.f 01.12.2020)Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :..With C.I. wheel of approved quality (screwed end)..25 mm nominal bore
1
486
486
18.29.1(SOR w.e.f 01.12.2020)Providing and fixing brass bib cock of approved quality..15 mm nominal bore
2
612
306
19.31(SOR w.e.f 01.12.2020)Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design.
1
3172
3172
17.7.1(SOR w.e.f 01.12.2020)"Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required..Single half stall urinal with 5 litre.P.V.C. automatic flushing cistern."
2
11134
5567
17.2.1(SOR w.e.f 01.12.2020)Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :..W.C. pan with ISI marked white solid plastic seat and lid
2
6072
3036
19.9.1.1(SOR w.e.f 01.12.2020)"Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design :. Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :..With well burnt bricks"
1
7997
7997
17.11.2(SOR w.e.f 01.12.2020)"Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :..White Vitreous China Wash basin size 630x450 mm with a single 15 mm.C.P. brass pillar tap."
2
4374
2187
19.32.1(SOR w.e.f 01.12.2020)Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 sand) including testing of joints etc. complete :..100 mm dia
2
596
298
19.32.2(SOR w.e.f 01.12.2020)Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 sand) including testing of joints etc. complete :..150 mm dia
1
411
411
17.87(SOR w.e.f 01.12.2020)Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms.
2
238
119
17.67(SOR w.e.f 01.12.2020)Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
0.54
1317
2440
17.83.2(SOR w.e.f 01.12.2020)Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour...600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms.
2
918
459
21.1.1.2(SOR w.e.f 01.12.2020)Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron)
44.91
14460
322
21.1.2.2(SOR w.e.f 01.12.2020)Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)
29.23
10085
345
29 NSORProviding & fixing Armstrong or equivalent make False Ceiling with Glass reinforced Gypsum, 12mm thick semi perforated designer tile of size 600x600mm False Ceiling sytem A-class, fire resistant, RH 95, NRC 0.3 to 0.4 with 15mm select GI powder coated T grid system with black reveal suspended from existing roof by 4 mm GI wire hanger etc. complete duly approved at 1200mm maximum centre to centre. Flush fitting 1200mm cross Tees to be interlocked between main runner at 600mm centers to form 1200 x 600mm modules, cut cross Tees longer than 600 mm at 1200mm cross Tees to form 600 x 600mm grid to support ceiling tiles complete, care should be taken to leave the recesses as per required arrangement of illuminaries, including transportation etc. complete and as directed & approved by Engineer-in-charge.
32.68
41830
1280
10.14.1 (SOR w.e.f 01.12.2020)Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
1800.74
194479
108
12.15(SOR w.e.f 01.12.2020)Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
213.53
139221
652
12.16.1(SOR w.e.f 01.12.2020)Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self- tapping screws complete : Ridges plain (500 - 600mm).
16.3
5216
320
37.4 SOR PWD wef 01.12.2020 ElectricalEarthing with copper earth plate 600mm X 600mm X 3mm thick including accessories and providing masonry encloser in cement mortar, cover plate having locking arrangement on the top and G.I. watering pipe 20mm dia 2.7 metre long etc. (but without charcoal or coke and salt) complete as required
1
8461
8461
37.5 SOR PWD wef 01.12.2020 ElectricalAdd extra for using salt and charcoal/coke for G.I. plate or copper plate earth electrode as required including excavation and refilling the pit in all type of soil, murrum
1
1015
1015
27.9.1.2SOR PWD wef 01.12.20 ElectricSupply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'D' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- Single pole MCB SP 6Amp to 32Amp 10kA rating
1
150
150
27.9.1.4 SOR PWD wef 01.12.20 ElectricSupply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'D' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- Single pole MCB SP 50 Amp to 63Amp 10kA rating
3
1095
365
27.9.3.2 SOR PWD wef 01.12.20 ElectricSupply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'D' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- For Triple pole MCB TP 6Amp to 32Amp 10kA rating
1
690
690
27.9.3.4 SOR PWD wef 01.12.20 ElectricSupply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'D' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- For Triple pole MCB TP 50 Amp to 63Amp 10kA rating
1
1075
1075
67b NSOR"Supply & fixing accepted standard steel sheet enclosures of Havells, Anchor, Crompton or equivelant make ( dust protected) for TPN Distribution Boards including Bus Bar, Neutral Link, din bar suitable for incorporating MCB surface / Flush mounting type including cost of all material, labour, taxes, transportation etc. complete..Upto 6 MCB per pole"
1
2290
2290
4.1.1.1SOR PWD wef 01.12.20 ElectricPoint wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for joints etc. as required as per specification for :- Light point/fan points. Primary short point. (Using flush type normal accessories)
9
2178
242
4.1.1.2 SOR PWD wef 01.12.20 ElectricPoint wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for joints etc. as required as per specification for :- Light point/fan points. Primary medium point. (Using flush type normal accessories)
11
5159
469
4.1.1.3 SOR PWD wef 01.12.20 ElectricPoint wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for joints etc. as required as per specification for :- Light point/fan points. Primary long point. (Using flush type normal accessories)
9
6777
753
4.1.4.1 SOR PWD wef 01.12.20 ElectricPoint wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for joints etc. as required as per specification for :- Call bell/buzzer points Short point. (Using flush type normal accessories)
1
221
221
9.1.1.3 SOR PWD wef 01.12.20 ElectricPoint wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for joints as per specification for :- On separate board Long point ( Using flush type normal accessories)
2
3054
1527
4.3.1 SOR PWD wef 01.12.20 ElectricWiring for circuit wiring with PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) of ISI marked suitable size etc. as required as per specification 2x2.5 Sq.mm. (Using flush type normal accessories)
200
16600
83
30.6.2 SOR PWD wef 01.12.20 ElectricSupplying, erecting and testing of approved make exhaust fan heavy duty with mounting frame, blades AC 230-250 complete connection and including, frame bolt/anchor hole fasteners etc. complete finished and as required.380mm sweep RPM 900 /1400
2
5074
2537
29.3.3 SOR PWD wef 01.12.20 ElectricSupply and fixing as per specification call bell/buzzer of approved make with necessary materials complete. Ding dong bell
4
284
71
30.1.2 SOR PWD wef 01.12.20 ElectricSupplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts including connections with all necessary material complete of approved as required confirming to IS :374/2019 with upto date amendments.Ceiling Fan (ISI marked)-1200 mm Sweep, with minimum air delivery 210 m*3/min and service value = 4.00 as per BEE..
5
8340
1668
31.3.3 SOR PWD wef 01.12.20 ElectricalSupply and fixing Led tube rod comprising of LED tube with non-integral/integral driver, upto 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with system efficacy 100 lm/Watt. LED driver PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job.Tube light LED 1 X 18Watt, Integral i/c batten aluminium body, PC diffuser.
12
8556
713
29.7.5SOR PWD wef 01.12.20 ElectricSupply and fixing in position LED lamp of approved make 9 Watt250Volt
6
600
100
29.7.3 SOR PWD wef 01.12.20 ElectricSupply and fixing in position LED lamp of approved make 5 Watt250Volt
2
150
75
18.7.3(SOR w.e.f 01.12.2020)Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,..having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work.25 mm nominal outer dia .Pipes.
1
185
185
2.6(SOR w.e.f 01.12.2020)Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil
36.4
4695
129
4.1.2.3(SOR w.e.f 01.12.2020)Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 40mm nominal size graded stone aggregate. M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate
4.8
16675
3474
5.16.6(SOR w.e.f 01.12.2020)Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete . (Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on "Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification")Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786
689.7
43382
62.9
5.1.1(SOR w.e.f 01.12.2020)Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : M-20 Grade Concrete
8
46368
5796
5.2.1(SOR w.e.f 01.12.2020)"Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and" string courses, fillets, columns, pillars, posts and struts etc. above plinth level and upto floor two level excluding cost of centering, shuttering, finishing and reinforcement: M-20 Grade Concrete
4.2
24633
5865
2.27.1(SOR w.e.f 01.12.2020)Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete. With hard muram having CBR 12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm)
36.7
11010
300
5.9.1(SOR w.e.f 01.12.2020)Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for concrete upto plinth level
49
9339
190.6
5.9.2.1(SOR w.e.f 01.12.2020)Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. Uptoplinthlevel.
26.6
5825
219
6.5.2(SOR w.e.f 01.12.2020)Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement Mortar 1:6 (1 cement: 6 sand).
0.9
3739
4155
6.6.2(SOR w.e.f 01.12.2020)Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg / cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete.Cement Mortar 1:6 (1 cement : 6 sand)
13
56550
4350
13.2.2(SOR w.e.f 01.12.2020)15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement : 6 sand)
66.6
9856
148
13.3.2(SOR w.e.f 01.12.2020)20 mm cement plaster of mix : 1:6 (1 cement : 6 sand)
84.2
16587
197
10.15 (SOR w.e.f 01.12.2020)Design, supply, fabrication, taransportion and erection of structural steel/mild steel built-up sections for steel building in column, rafter, truss, floor joist, wind bracings, tie beam, foundation bolts, fasteners etc. Including two coats of Epoxy paint and one coat of primer. These structural steel/built-up sections shall be manufactured using advanced CNC Plasma/Oxy Acetylene cutter and H Beam Welding line. Welding shall be in full depth on both sides of the plate adopting relevant I.S Code.
121.2
15998
132
12.15(SOR w.e.f 01.12.2020)Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
25.2
16430
652
11.35 (SOR w.e.f 01.12.2020)Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 sand) 25 mm thick.(Area of slab to be over 0.25 sqm)
26.1
24273
930
10.6.1 (SOR w.e.f 01.12.2020)Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to I.S. 4454- part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.25mm M.S. laths with 1.25 mm thick top cover.
8.1
17820
2200
9.43.1 (SOR w.e.f 01.12.2020)Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding.
195
17745
91
21.1.2.2(SOR w.e.f 01.12.2020)Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)
27.6
9522
345
10.27.1 (SOR w.e.f 01.12.2020)Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete. With 4.0 mm thick glass panes
2.4
1900
792
13.53(SOR w.e.f 01.12.2020)Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premium exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface)
76.9
9997
130
13.46(SOR w.e.f 01.12.2020)Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work
66.76
4272
64
13.67.2(SOR w.e.f 01.12.2020)Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/litre.
31.4
753
24
13.64(SOR w.e.f 01.12.2020)Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
31.4
1664
53
2.24(SOR w.e.f 01.12.2020)Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
28
2016
72
4.1.1.1SOR PWD wef 01.12.20 ElectricPoint wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for joints etc. as required as per specification for :- Light point/fan points. Primary short point. (Using flush type normal accessories)
2
484
242
4.1.1.2 SOR PWD wef 01.12.20 ElectricPoint wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for joints etc. as required as per specification for :- Light point/fan points. Primary medium point. (Using flush type normal accessories)
5
2345
469
27.8.1.2 SOR PWD wef 01.12.20 ElectricSupply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- Single pole MCB SP 6Amp to 32Amp 10kA rating
2
272
136
30.1.2 SOR PWD wef 01.12.20 ElectricSupplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts including connections with all necessary material complete of approved as required confirming to IS :374/2019 with upto date amendments.Ceiling Fan (ISI marked)-1200 mm Sweep, with minimum air delivery 210 m*3/min and service value = 4.00 as per BEE..
1
1668
1668
31.3.4 SOR PWD wef 01.12.20 ElectricalSupply and fixing Led tube rod comprising of LED tube with non-integral/integral driver, upto 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with system efficacy 100 lm/Watt. LED driver PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job.Tube light LED 1 X 20/22Watt, Integral i/c batten aluminium body, PC diffuser.
3
2346
782
72a NSOR"Supplying & fixing of LED Bulb of Philips, Havells, Bajaj, Crompton or eqivalent make including fixing in position etc. as per direction of Engineer-in-Charge..(a) 9 watt"
4
720
180
4.1.2.3(SOR w.e.f 01.12.2020)Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 40mm nominal size graded stone aggregate. M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate
0.6
2084
3474
4.1.1.4(SOR w.e.f 01.12.2020)Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 20mm nominal size graded stone aggregate. M-10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate )
4.05
15754
3890
4.3.1(SOR w.e.f 01.12.2020)Centering and shuttering including strutting, propping etc. and removal of form work for : Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth.
3
507
169
4.3.2(SOR w.e.f 01.12.2020)Centering and shuttering including strutting, propping etc. and removal of form work for : above plinth: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, and string courses fillets etc.
12.6
3364
267
10.1 (SOR w.e.f 01.12.2020)Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
468
30420
65
13.50(SOR w.e.f 01.12.2020)Finishing walls by any mechanical or manual means with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84 kg/10 sqm).
30
1440
48
13.64(SOR w.e.f 01.12.2020)Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
21
1113
53
43 NSORP/F 2400 mm high chain link mesh 75x75 mm square size of GI wire 4 mm dia conforming to IS specification 2771-1981 including all necessary arrangment for fixing the same to angle iron post such as hooks, cleats, washers, upper & lower runner GI wire with cost of chain link mesh and all other fixtures complete as per Drawing No.T&D/DRG./MISC./2/R3 and direction of Engineer- in- Charge.
72
19440
270
45 NSORP&F Barbed wire (9.38 Kg per 100 M min.) to MS Angle Iron posts including screwing with GI tying wire staples or steel pins I/c cost of wire, staples pins etc. as per the direction of Engineer-In- Charge
90
720
8
34 NSORSupply, stacking, spreading and hand packing for road works, 80mm over size metal black trap, basalt or granite free from dust & foreign materials including all lead and lift, stacking, boxing, labour charges, T&P,transportation from approved quarry or crusher to site, royalty charges etc. complete as per direction of Engineer-in-charge.
30
24960
832
2 NSORSupplying and spreading in EHV Substation yard or road works with hard moorum/ hard copra having maximum dry desnsity not less than 2 MT per cum with stacking, boxing , including cost of material, T&P, Royalty, all lead & lift etc. complete in layers not exceeding 200 mm , as per specifications and direction of Engineer-in-Charge. but excluding compaction
14.1
3807
270
10 NSORCompaction of moorum /earth by using SRR/DRR including hire & running expenses of roller, cost of water, T&P, labour, transportation, taxes etc. complete as directed by Engineer in charge.
6
132
22
11 NSORConsolidation of oversize metal by SRR / DRR with spreading of Moorum including hire & running expenses of roller with cost of water, T&P, Labour, transportation, taxes etc. complete,
30
3090
103
4.3.1(SOR w.e.f 01.12.2020)Centering and shuttering including strutting, propping etc. and removal of form work for : Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth.
9
1521
169
4.1.1.3(SOR w.e.f 01.12.2020)Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 20mm nominal size graded stone aggregate. M-15 - Grade concrete
20.25
90537
4471
2.6(SOR w.e.f 01.12.2020)Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil
6
774
129
2.27.1(SOR w.e.f 01.12.2020)Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete. With hard muram having CBR 12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm)
9
2700
300
2.6(SOR w.e.f 01.12.2020)Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil
45
5805
129
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements