MP Power Transmission Company Limited Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
MP Power Transmission Company Limited - MPPTCL Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date17 Oct 2024
Closing Soon25 Nov 2024
Tender Amount₹ 1,14,59,000
Costs
EMD
₹ 2,29,180Document Cost
₹ 5,900Tender Fee
₹ 1,352
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MPPTC_376916_1Tender No
1112Tender Authority
MP Power Transmission Company Limited ViewPurchaser Address
-Website
http://https://mptenders.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
R and M of staff Quarters at 400 KV S/s Chhegaon, 220 KV S/s Barwaha, Nimrani, Nepanagar, 132 KV S/s Khargone, Khandwa, Bahadarpur and Matapura Colony Nepanagar 132 KV S/s Premises.
BOQ Items
3004835 ,4.1.1.4,Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level :M-10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate )
33
3890
128370
3004887 ,5.3.1,Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in beams, suspended floors, roofs
12
6155
73860
3004897 ,5.9.3,Centering and shuttering in cluding strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform.
150
439
65940
3004929 ,5.16.6,Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages
600
62
37740
3004995 ,6.6.1,Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg/cm2 and water absorpt ion not more than 20% in superstructure above plinth level and up to floor two level
30
4541
136230
3005211 ,9.18.1,Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board ..35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
122
2600
317200
3005536 ,9.166.2,Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and .......... out of which 75mm shall be flat and 20mm shall be tapered in 45 degree
84
2490
209160
3005271 ,9.43.2,Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
140
100
14000
3005305 ,9.57.1,Providing and fixing 300x16 mm ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete:
56
170
9520
3005307 ,9.58.1,Providing and fixing 250x10 mm ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :
56
68
3808
3005312 ,9.60.1,Providing and fixing 300x20x6 mm ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete :
28
72
2016
3005314 ,9.61.1,Providing and fixing 125 mm ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :
140
27
3780
3006146 ,13.2.1,15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement : 4 sand)
1040
162
168480
3006180 ,13.27.1,Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete G.I. chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails before plastering upt 10 meter height.
300
62
18600
3006148 ,13.3.1,20 mm cement plaster of mix : 1:4 (1 cement : 4 sand)
780
215
167700
3006457 ,15.15.1,Taking out doors, windows and clerestory windows (Steel or wood) ….within 50 meters lead...Of area 3 sqm and below
100
33
3300
3006458 ,15.15.2,Of area beyond 3 sqm
2
44
88
3006596 ,17.1.1,Providing and fixing water closet squatting pan including cutting and making good the walls and floors wherever required : White Vitreous china pattern W.C. pan of size 580x440mm with integral type foot rests.
5
2995
14975
3006598 ,17.2.1,Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, including cutting and making good the walls and floors wherever required :
12
3036
36432
3006619 ,17.11.1,Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, C.P. brass pillar taps.
28
2460
68880
3006638 ,17.14.2.2,Kitchen sink without drain board 610x460 mm bowl depth 200 mm.
28
4351
121828
3006819 ,17.64.2.2,Flexible 40 mm dia pipe (only in residential & complaxes)
56
98
5488
3006923 ,18.6.2.1,Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, as per direction of Engineer in Charge….15 mm nominal outer dia .Pipes.
250
207
51750
3006929 ,18.7.3,Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 25 mm nominal outer dia .Pipes as per direction of Engineer in Charge.
150
185
27750
3007122 ,18.12.1.1,With C.I. wheel of approved quality (screwed end)..25 mm nominal bore.
28
486
13608
3007123 ,18.12.1.2,With C.I. wheel of approved quality (screwed end)..32 mm nominal bore.
5
558
2790
3007210 ,18.28,Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701
14000
7
98000
3007217 ,18.33,Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm, 15 mm nominal bore
56
544
30464
3007218 ,18.34,Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore.
28
778
21784
3007269 ,18.61,Providing and fixing CP jet assembly to including connection etc complete.
12
375
4500
3007291 ,19.4.1,Providing and laying below ground unplasticised PVC pipe ……….. all necessary fittings etc. complete. Excavation to be paid seperataly….110 mm diameter OD
252
234
58968
3007292 ,19.4.2,Providing and laying below ground unplasticised PVC pipe ……….. all necessary fittings etc. complete. Excavation to be paid seperataly...160 mm diameter OD
168
477
80136
3007366 ,19.27.1,Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design :-With well burnt bricks
28
3941
110348
3007373 ,19.31,Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete design.
5
3172
15860
3007474 ,21.1.2.2,Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections sections and other sections of approved make conforming to IS: 733 and IS: 1285
660
345
227700
3007479 ,23.3.1,Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) :
140
774
108360
3007491 ,21.9,Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings
150
53
7950
3007500 ,21.15.2,Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.
50
57
2850
3007524 ,22.14.1,Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)
21
6569
137949
3006376 ,14.65,Providing & casting & Repairing of excessively damaged members
with micro-concrete at all levels with all leads & lift or as directed including formwork, centering, scaffolding, and mixing, laying, levelling, and finishing including curing etc. complete (excluding steel reinforcement
20
61
1220
3006415 ,14.80.1,Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: easurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2)-12 mm average thickness
840
195
163800
3007534 ,22.22,Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of(i) Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely.(ii) Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80%-chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2ndcoat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the
coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per anufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1
st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area.
(iv) The treated area should be cure with water for 48 hrs. by flooding the surface.
(v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee)
840
465
390600
3007542 ,22.3,Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush.
150
55
8250
132 KV Khargone Colony
3004755 ,2.9.2 , Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by amming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m
130
156
20280
3004887 ,5.3.1 , Reinforced cement concrete work in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level
4
6155
24620
3004897 ,5.9.3 , Centering and shuttering in cluding strutting, propping etc. and removal of form for:
48
439
21100.8
3004929 ,5.16.6 , Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers
200
62
12580
3004995 ,6.6.1 , Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg/cm2 and water absorpt ion not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete.
6
4541
27246
3005211 ,9.18.1 , Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board ............ and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of such as duro board, century or equivelant make.
84
2600
218400
3005536 ,9.166.2 , Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness
36
2490
89640
3005271 ,9.43.2 , Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
120
100
12000
3005305 ,9.57.1 , Providing and fixing 300x16 mm ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete:
42
170
7140
3005307 ,9.58.1 , Providing and fixing 250x10 mm ISI marked oxidised M.S. tower bolt black finish,with necessary screws etc. complete :
42
68
2856
3005312 ,9.60.1 , Providing and fixing 300x20x6 mm ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete :
42
72
3024
3005314 ,9.61.1 , Providing and fixing 125 mm ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :
84
27
2268
3006147 ,13.2.2 , 15 mm cement plaster on the rough side of single or half brick wall of mix
210
148
31080
3006180 ,13.27.1 , Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete
210
62
13020
3006149 ,13.3.2 , 20 mm cement plaster of mix :
210
197
41370
3006206 ,13.41 , Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete.
3980
74
294520
3006279 ,14.1 , Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sqm……within 50 meters lead.
140
180
25200
3006457 ,15.15.1 , Taking out doors, windows and clerestory windows (Steel or wood) ….within 50 meters lead.
65
33
2145
3006596 ,17.1.1 , Providing and fixing water closet squatting pan including cutting and making good the walls and floors wherever required :
4
2995
11980
3006598 ,17.2.1 , Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid
2
3036
6072
3006619 ,17.11.1 , Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard patternbrass pillar taps.
12
2460
29520
3006638 ,17.14.2.2 , Kitchen 610x460 mm bowl depth 200 mm. sink without drain board
12
4351
52212
3006819 ,17.64.2.2 , Flexible pipe 40 mm dia (only in residential & complaxes)
42
98
4116
3006923 ,18.6.2.1 , Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, as per direction of Engineer in Charge...15 mm nominal outer dia .Pipes.
210
207
43470
3006929 ,18.7.3 , Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, as per direction of Engineer in Charge.
180
185
33300
3007122 ,18.12.1.1 , With C.I. wheel of approved quality (screwed end)..25 mm nominal bore.
21
486
10206
3007123 ,18.12.1.2 , With C.I. wheel of approved quality (screwed end)..32 mm nominal bore.
5
558
2790
3007210 ,18.28 , Providing and placing on terrace (at all floor levels) polyethylene water storage tank
10500
7
73500
3007217 ,18.33 , Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm, 15 mm nominal bore
42
544
22848
3007218 ,18.34 , Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore.
21
778
16338
3007291 ,19.4.1 , Providing and laying below ground unplasticised PVC pipe ……….. all necessary fittings etc. complete. Excavation to be paid seperataly...110 mm diameter OD
252
234
58968
3007292 ,19.4.2 , Providing and laying below ground unplasticised PVC pipe ……….. all necessary fittings etc. complete. Excavation to be paid seperataly...160 mm diameter OD
130
477
62010
3007366 ,19.27.1 , Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design :-With well burnt bricks
21
3941
82761
3007373 ,19.31 , Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design.
3
3172
9516
3007474 ,21.1.2.2 , Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size,
630
345
217350
3007479 ,23.3.1 , Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) :
136
774
105264
3007491 ,21.9 , Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality
50
53
2650
3007500 ,21.15.2 , Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.
110
57
6270
3007524 ,22.14.1 , Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)
16
6569
105104
3006376 ,14.65 , Providing & casting & Repairing of excessively damaged members
with micro-concrete at all levels with all leads & lift or as directed including formwork, centering, scaffolding, and mixing, laying, levelling, and finishing including curing etc. complete (excluding steel reinforcement
105
61
6405
3006415 ,14.80.1 , Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: easurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2)-12 mm average thickness
400
195
78000
3007534 ,22.22 , Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of(i) Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely.(ii) Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80%-chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2ndcoat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the
coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per anufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1
st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area.
(iv) The treated area should be cure with water for 48 hrs. by flooding the surface.
(v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee)
400
465
186000
3007542 ,22.3 , Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush.
126
55
6930
3006156 ,13.8 , 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand)
210
96
20160
132Kv S/s Khandwa Colony 3005212, 9.18.2, Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. direction of Engineer-inCharge.
61
371
22631
3005529, 9.16, Providing and fixing UPVC panelled door shutter UPVC 30 mm thick factory made PVC or UPVC door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side.
34
2026
68884
3005211, 9.18.1, Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
15
2600
39000
3005404, 9.101.2, Providing and fixing chromium plated brass sliding door bolts ISI marked with nuts and screws etc complete.300x16mm
14
268
3752
3005429, 9.109.1, Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. plete:300*16
14
241
3374
3005430, 9.109.2, Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:250*16
7
195
1365
3005433, 9.110.3, Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 250x10 mm
8
102
816
3005439, 9.113.1, Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:125 mm
12
75
900
3007474, 21.1.2.2, Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.
350
345
120750
3007479, 23.3.1, Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.
150
774
116100
3006285, 14.5.1, Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
15
679
10185
3005270, 9.43.1, Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete...Fixed to steel windows by welding.
150
91
13650
3006455, 15.14.1, Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below
28
85
2380
3006033, 12.32.1, Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion..75 mm diameter (minimum wall thickness 1.8mm)
64
136
8704
3006034, 12.32.2, Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion...110 mm diameter (minimum wall thickness 2.2mm)
80
238
19040
3007210, 18.28, Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
16000
7
112000
3006639, 17.14.2.3, Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board..610x460 mm bowl depth 200 mm
19
3422
65018
3006596, 17.1.1, Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests
19
2995
56905
3006923, 18.6.2.1, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings /c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
108
207
22356
3006925, 18.6.2.3, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings /c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work including cutting chases and making good the walls etc....25 mm nominal outer dia Pipes.
150
288
43200
3006926, 18.6.2..4, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings /c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
110
360
39600
3007291, 19.4.1, Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly.
181
234
42354
3007215, 18.31, Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, 15 mm nominal bore.
51
458
23358
3007218, 18.34, Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore
34
778
26452
3005718, 10.27.1, Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete.
10
792
7920
3007366, 19.27.1, Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design :-With well burnt bricks
12
3941
47292
3007524, 22.14.1, Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)
7
6569
45983
3006376, 14.65, Providing & casting & Repairing of excessively damaged members with micro-concrete at all levels with all leads & lift or as directed including formwork, centering, scaffolding, and mixing, laying, levelling, and finishing including curing etc. complete (excluding steel reinforcement
60
61
3660
3006415, 14.80.1, Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: easurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been atisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2)-12 mm average thickness
290
195
56550
3007534, 22.22, Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of(i) Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely.(ii) Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80%-chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2ndcoat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per anufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area.(iv) The treated area should be cure with water for 48 hrs. by flooding the surface.(v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee)
290
465
134850
3007542, 22.3, Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush.
60
55
3300
3006619, 17.11.1, Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require
11
2460
27060
3006077, 12.5, Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7
48.1
652
31361.2
3005664, 10.1, Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
220
65
14300
3006002, 1.5, Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S.gusset plates at the junction and corners 25mm dia pulley,40x40x6mm angle and T-ironguide at the top and bottom respectively including applying a priming coat of approved steel primer.
21
652
13692
220Kv S/s Nimrani Colony 3004755, 2.9.2,Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers
60
156
9360
3005211, 9.18.1,Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of such as duro board, century or equivelant make.
32
2600
83200
3005214, 9.19.1,Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202
32
1622
51904
3005536, 9.166.2,Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness
24
2490
59760
3005271, 9.43.2,Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc.
80
100
8000
3005305, 9.57.1,Providing and fixing 300x16 mm ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete:
16
170
2720
3005307, 9.58.1,Providing and fixing 250x10 mm ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :
32
68
2176
3005312, 9.60.1,Providing and fixing 300x20x6 mm ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete :
16
72
1152
3005314, 9.61.1,Providing and fixing 125 mm ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :
48
27
1296
3006146, 13.2.1,15 mm cement plaster on the rough side of single or half brick wall of mix
80
162
12960
3006180, 13.27.1,Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete
80
62
4960
3006148, 13.3.1,20 mm cement plaster of mix :1:4 (1 cement : 4 sand)
120
215
25800
3006206, 13.41,Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete.
1835
74
135790
3006156, 13.8,6 mm cement plaster of mix : 1:3 (1 cement : 3 sand)
80
96
7680
3006279, 14.1,Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 qm……within 50 meters lead. With cement mortar 1:4
60
180
10800
3006457, 15.15.1,Taking out doors, windows and clerestory windows (Steel or wood) ….within 50 meters lead.
72
33
2376
3006598, 17.2.1,Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, including cutting and making good the walls and floors
1
3036
3036
3006619, 17.11.1,Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, C.P. brass pillar taps.
8
2460
19680
3006638, 17.14.2.2,Kitchen 610x460 mm bowl depth 200 mm. sink without drain board
8
4351
34808
3006819, 17.64.2.2,Flexible pipe 40 mm dia (only in residential & complaxes)
16
98
1568
3006923, 18.6.2.1,Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,as per direction of Engineer in Charge...15 mm nominal outer dia .Pipes.
48
207
9936
3006925, 18.6.2.3,Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,as per direction of Engineer in Charge...25 mm nominal outer dia .Pipes.
48
288
13824
3006969, 18.7.3,Providing and fixing 25 mm nominal outer dia .Pipes. Chlorinated Polyvinyl Chloride (CPVC) pipes,
60
185
11100
3007122, 18.12.1.1,With C.I. wheel of approved quality (screwed end)..25 mm nominal bore.
8
486
3888
3007210, 18.28,Providing and placing on terrace polyethylene water storage tank
8000
7
56000
3007217, 18.33,Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards
16
544
8704
3007218, 18.34,Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore.
8
778
6224
3007269, 18.61,Providing and fixing CP jet assembly to including connection etc complete.
1
375
375
3007291, 19.4.1,Providing and laying below ground unplasticised PVC pipe all necessary fittings etc. complete. Excavation to be paid seperataly...110 mm diameter OD
96
234
22464
3007292, 19.4.2,Providing and laying below ground unplasticised PVC pipe all necessary fittings etc. complete. Excavation to be paid seperataly..160 mm diameter OD
60
477
28620
3007366, 19.27.1,Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design :-With well burnt bricks
8
3941
31528
3007373, 19.31,Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design.
2
3172
6344
3007474, 21.1.2.2,Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make
240
345
82800
3007480, 23.3.2,Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc.
56
948
53088
3007491, 21.9,Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality
100
53
5300
3007500, 21.15.2,Providing and fixing Powder coated minimum thickness 50 micron aluminium.
80
57
4560
3007524, 22.14.1,Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)
8
6569
52552
3006376, 14.65,Providing & casting & Repairing of excessively damaged members
with micro-concrete at all levels with all leads & lift or as directed including formwork, centering, scaffolding, and mixing, laying, levelling, and finishing including curing etc. complete (excluding steel reinforcement
5
61
305
3006415, 14.80.1,Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: easurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2)-12 mm average thickness
180
195
35100
3007534, 22.22,Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of(i) Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely.(ii) Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80%-chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2ndcoat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the
coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per anufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1
st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area.
(iv) The treated area should be cure with water for 48 hrs. by flooding the surface.
(v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee)
180
465
83700
3007542, 22.3,Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush.
24
55
1320
220 kv Nepanagar Colony
3005534, 9.165, Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturer's specification and direction of Engineer-inCharge.
19
371
7049
3005529, 9.16, Providing and fixing UPVC panelled door shutter UPVC 30 mm thick factory made PVC or UPVC door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the
10
2026
20260
3005211, 9.18.1, Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. ... 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
11
2600
28600
3005403, 9.101.1, Providing and fixing chromium plated brass sliding door bolts ISI marked with nuts and screws etc complete.300x16mm
12
268
3216
3005429, 9.109.1, Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:300*16
12
241
2892
3005430, 9.109.2, Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:250*16
8
195
1560
3005433, 9.110.3, Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 250x10 mm
8
102
816
3005439, 9.113.1, Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:125 mm
14
75
1050
3007474, 21.1.2.2, Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
100
345
34500
3005270, 9.43.1, Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete...Fixed to steel windows by welding.
144
91
13104
3006455, 15.14.1, Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below
8
85
680
3006033, 12.32.1, Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion..75 mm diameter (minimum wall
thickness 1.8mm)
18
136
2448
3007210, 18.28, Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
1500
7
10500
3006619, 17.11.1, Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls herever require :
3
2460
7380
3006596, 17.1.1, Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440mm with
integral type foot rests
3
2995
8985
3006923, 18.6.2.1, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings /c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work including cutting chases and making good the walls etc....15 mm nominal outer dia Pipes.
30
207
6210
3006925, 18.6.2.3, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings /c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work including cutting chases and making good the walls etc.......25 mm nominal outer dia Pipes.
30
288
8640
3007291, 19.4.1, Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly.
97
234
22698
3006285, 14.5.1, Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
3
679
2037
3007215, 18.31, Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, 15 mm nominal bore.
9
458
4122
3007218, 18.34, Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore
3
778
2334
3005718, 10.27.1, Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete.
4
792
3168
3007480, 23.3.2, Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc.
20
948
18960
3007366, 19.27.1, Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design :-With well burnt bricks
3
3941
11823
3007524, 22.14.1, Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)
8
6569
52552
3006376, 14.65, Providing & casting & Repairing of excessively damaged members with micro-concrete at all levels with all leads & lift or as directed including formwork, centering, scaffolding, and mixing, laying, levelling, and finishing including curing etc. complete (excluding steel reinforcement
3
61
183
3006415, 14.80.1, Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: easurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been atisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2)-12 mm average thickness
148
195
28860
3007534, 22.22, Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of(i) Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely.(ii) Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80%-chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2ndcoat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per anufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area.(iv) The treated area should be cure with water for 48 hrs. by flooding the surface.(v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee)
148
465
68820
3007542, 22.3, Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush.
15
55
825
Matapur Colony Nepanagar
3005534 ,9.165 , Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame.
16
371
5936
3005529 ,9.16 , Providing and fixing UPVC panelled door shutter UPVC 30 mm thick factory made PVC or UPVC door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side.
9
2026
18234
3005211 ,9.18.1 , Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. ... 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
10.4
2600
27040
3005403 ,9.101.1 , Providing and fixing chromium plated brass sliding door bolts ISI marked with nuts and screws etc complete.300x16mm
10
268
2680
3005429 ,9.109.1 , Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:300*16
6
241
1446
3005430 ,9.109.2 , Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:250*16
6
195
1170
3005433 ,9.110.3 , Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 250x10 mm
6
102
612
3005439 ,9.113.1 , Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:125 mm
12
75
900
3007474 ,21.1.2.2 , Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733
90
345
31050
3007479 ,21.3.1 , Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) :
15
774
11610
3006285 ,14.5.1 , Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
3.9
679
2648.1
3005270 ,9.43.1 , Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete...Fixed to steel windows by welding.
200
91
18200
3006455 ,15.14.1 , Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below
6
85
510
3006033 ,12.32.1 , Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion..75 mm diameter (minimum wall thickness 1.8mm)
15
136
2040
3006034 ,12.32.2 , Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion...110 mm diameter (minimum wall thickness 2.2mm)
15
238
3570
3007210 ,18.28 , Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
1500
7
10500
3006619 ,17.11.1 , Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :
3
2460
7380
3006596 ,17.1.1 , Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests
3
2995
8985
3006923 ,18.6.2.1 , Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings /c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work including cutting chases and making good the walls etc....15 mm nominal outer dia Pipes.
25
207
5175
3006924 ,18.6.2.2 , Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings /c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work including cutting chases and making good the walls etc....20 mm nominal outer dia Pipes.
20
234
4680
3006926 ,18.6.2.4 , Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings /c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
10
360
3600
3007291 ,19.4.1 , Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly.
112
234
26208
3007215 ,18.31 , Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, 15 mm nominal bore.
10
458
4580
3007218 ,18.34 , Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore
4
778
3112
3005718 ,10.27.1 , Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete.
5
792
3960
3005179 ,9.6.8 , Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured).
15
1532
22980
3007366 ,19.27.1 , Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design :-With well burnt bricks
3
3941
11823
3007524 ,22.14.1 , Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)
9
6569
59121
3006376 ,14.65 , Providing & casting & Repairing of excessively damaged members with micro-concrete at all levels with all leads & lift or as directed including formwork, centering, scaffolding, and mixing, laying, levelling, and finishing including curing etc. complete (excluding steel reinforcement
10
61
610
3006415 ,14.80.1 , Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: easurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been atisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2)-12 mm average thickness
175
195
34125
3007534 ,22.22 , Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of(i) Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely.(ii) Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80%-chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2ndcoat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per anufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area.(iv) The treated area should be cure with water for 48 hrs. by flooding the surface.(v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee)
175
465
81375
3007542 ,22.3 , Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush.
20
55
1100
132Kv S/s Bahadarpur Colony 30055349.18.2Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturer's specification and direction of Engineer-inCharge.
16
371
5936
30055299.16Providing and fixing UPVC panelled door shutter UPVC 30 mm thick factory made PVC or UPVC door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the
8
2026
16208
30052119.18.1Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. ... 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
5
2600
13000
30054039.101.2Providing and fixing chromium plated brass sliding door bolts ISI marked with nuts and screws etc complete.300x16mm
6
268
1608
30054299.109.1Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. plete:300*16
8
241
1928
30054309.109.2Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:250*16
4
195
780
30054339.110.3Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 250x10 mm
8
102
816
30054399.113.1Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:125 mm
12
75
900
300747421.1.2.2Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.
20
345
6900
300747921.3.1Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) :
10
774
7740
300628514.5.1Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Z
4
679
2716
30052709.43.1Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete...Fixed to steel windows by welding.
100
91
9100
300645515.14.1Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below
6
85
510
300603312.32.1Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion..75 mm diameter (minimum wall thickness 1.8mm)
15
136
2040
300603412.32.2Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion...110 mm diameter (minimum wall thickness 2.2mm)
15
238
3570
300721018.28Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
1000
7
7000
300663817.14.2.2Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board..610x460 mm bowl depth 200 mm
2
4351
8702
300661917.11.1Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :
2
2460
4920
300659617.1.1Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests
2
2995
5990
300692318.6.2.1Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings /c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work including cutting chases and making good the walls etc....15 mm nominal outer dia Pipes.
25
207
5175
300692518.6.2.3Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings /c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. -25 mm nominal outer dia .Pipes.
10
288
2880
300729119.4.1Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly.-110 mm diameter OD (min. wall thickness 3.2mm)
12
234
2808
300721518.31Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, 15 mm nominal bore.
4
458
1832
300721818.34Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore
2
778
1556
300571810.27.1Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete.
2
792
1584
300736619.27.1Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design :-With well burnt bricks
2
3941
7882
300752422.14.1Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)
5
6569
32845
300637614.65Providing & casting & Repairing of excessively damaged members with micro-concrete at all levels with all leads & lift or as directed including formwork, centering, scaffolding, and mixing, laying, levelling, and finishing including curing etc. complete (excluding steel reinforcement
5
61
305
300641514.80.1Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: easurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been atisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2)-12 mm average thickness
66
195
12870
300753422.22Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of(i) Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely.(ii) Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80%-chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2ndcoat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per anufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area.(iv) The treated area should be cure with water for 48 hrs. by flooding the surface.(v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee)
66
465
30690
300754222.3Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush.
15
55
825
300566410.1Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
50
65
3250
30060021.5Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S.gusset plates at the junction and corners 25mm dia pulley,40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer.
6
652
3912
400Kv S/s Chhageon
3005188,9.8.2.2, Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Kiln seasoned and chemically treated Haldu, Kail, Bija wood 30 mm thick
5
2474
12370
3005216,9.19.3, Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws.
20
1533
30660
3005430,9.109.2, Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 250x16 mm
15
195
2925
3005433,9.110.3, Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 250x10 mm
15
102
1530
3005706,10.22.2, Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In granite frame guard bars..
50
85
4250
3000120,22NSOR
4.5, Providing & Fixing 32 mm dia. chromium plated brass or suitable alloy flush valve(heavy duty) push type or quarter turn of Johnson,Parryware, Plumber, Jaguar or equivelent make fitted with all necessary fittings, including cutting,chasing and making good the walls after concealment in C.M. 1:3 complete as directed by the Engineer-in-Charge.
2
990
1980
3006923,18.6.2.1, Concealed work including cutting chases and making good the walls etc.15 mm dia pipes
5
207
1035
3006924,18.6.2.2, Concealed work including cutting chases and making good the walls etc.20 mm dia pipes
5
234
1170
3006925,18.6.2.3, Concealed work including cutting chases and making good the walls etc.25 mm dia pipes
5
288
1440
3006927,18.7.1, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work in 15 mm dai pipes
15
122
1830
3006929,18.7.3, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work in 25 mm dai pipes
10
185
1850
3006931,18.7.5, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work in 40 mm dai pipes
300
324
97200
3007122,18.12.1.1, Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : with CI wheel screwed end:- 25 mm nominal bore
2
486
972
3007124,18.12.1.3, Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : with CI wheel screwed end:- 40 mm nominal bore
1
677
677
3007211,18.29.1, Providing and fixing brass bib cock of approved quality, 15mm nominal bore
8
306
2448
3007213,18.30.1, Providing and fixing brass stop cock of approved quality : 15 mm nominal bore
2
318
636
3007292,19.4.2, Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly. 160 mm daimeter 4 mm thickness
30
477
14310
3006661,17.29.1, Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : flat back wash basin 6308450 mm
2
1379
2758
3007374,19.32.1, Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 sand) including testing of joints etc. complete : 100 mm dia
2
298
596
3007375,19.32.2, Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 sand) including testing of joints etc. complete : 150 mm dia
3
411
1233
3007306,19.7.1.1, Providing and fixing square- mouth S.W. gully trap class SP1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100 *100 mm size P type:- with well burnt bricks
2
1764
3528
3006034,12.32.2, Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.110 mm daimeter wall thickness 2.2 mm minimum
8
238
1904
3006596,17.1.1, Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White vitrous China Orisa pattern WC pan 580*440 mm
1
2995
2995
3006598,17.2.1, Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : WC pan with plastic solid cover
1
3036
3036
3006638,17.14.2.2, Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :-610x460 mm bowl depth 200 mm.
2
4351
8702
1000557, NOSR Payment of fixed additional charges for Mobilization of men, materials, T&P etc. due to change in location of work from one substation/premises to another substation/premises after 1st sub order for each separate sub-order (s) under the scope of same contract of civil works shall be payable as per following conditions: -(i) Applicable only after 1st sub work order and only on change in work location from one substation/premises to another substation or any other MPPTCL’s premises situated at a distance of more than 3.00 Kms. for execution of work under the same main contract. (Nearest motorable road distance shall be considered for this purpose) (ii) The distance as mentioned in point no. – (i) shall be considered from the nearest current location of ongoing work (where the work shall be in progress by the contractor at the time of placing new sub-order irrespective of scheduled completion period given for that work) under the scope of same contract. (iii) Not applicable for the balance work (when the sub order of any civil work is placed in two or more parts) of dusting, metaling etc. on the same feeder bay work for which the work of foundation etc. has been executed previously under the scope of same contract.(iv) The rates are inclusive of cost of transportation of labour, material, T&P etc. and cost of all respective works in all respect up to any distance in the area of jurisdiction of main work order for the contract and also in nearby areas as per necessity i/c all applicable taxes (except GST) etc. all complete, as per terms and conditions of order and as per direction of Engineer – In – Charge.(Base Rate: - Rs. 10,000/- per shifting) Note:- This payment of fixed additional charges for changing of work location shall be payable only when work will be executed in accordance with location wise priority fixed by the Engineer-In-Charge (if any) and only on successful completion of work in all respect as per scope of work in the sub-order for which said additional charges are to be payable.
5
10000
50000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%