MP Power Transmission Company Limited Tender

SMB GIST/375 Vol-I, 4000229, 33 KV CT/LA/PI

SMB GIST/375 Vol-I, 4000226, 33 KV MB

SMB GIST/375 Vol-I, 4000242, 132 KV LA

SMB GIST/375 Vol-I , 4000235, 132 KV Gantry

SMB GIST/375 Vol-I , 4000239, 132 KV Isolator

SMB GIST/375 Vol-I, 4000243, 132 KV Circuit breaker

SMB GIST/375 Vol-I, 4000241, 132 KV CT

SMB GIST/375 Vol-II, 4000301, D Type Cable trench

SMB GIST/375 Vol-II , 4000302, E Type Cable trench

SMB GIST/375 Vol-II, 4000303, F Type Cable Trench

SMB GIST/375 Vol-II , 4000322, Earth Pit

Additional items not covered in GIST of SMB , 2.6, 3004746, Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil

2.7.1, 3004747, Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) …..Ordinary rock

2.7.3, 3004749, Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm ….HR (blasting prohibited)

2.24, 3004792, Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

2.27.2, 3004797, Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm depth and dressing complete.

4.1.2.3, 3004838, M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate

5.16.1, 3004924, Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be

5.16.6, 3004929, Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786

5.9.1, 3004893, Centering and shuttering in cluding strutting, propping etc. and removal of form for:… Foundations, footings, bases of columns, etc. for concrete upto plinth level

5.1.1, 3004884, Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) ... reinforcement - All work up to plinth level : ...M-20 Grade Concrete

5.9.2.1, 3004894, Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc....Uptoplinthlevel.

10.22.1, 3005705, Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required…….In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete.

10.22.2, 3005706, In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

4.4.1, 3004850, Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing

11.72.2, 3005910, Providing and laying factory made chamfered edge Cement Concrete paver blocks of required colour strength, thickness pattern, surface texture (smooth/ rough) and size/shape, ….60 mm thick C.C. paver block of M-35 grade

8 NSOR , 3000106, Supply,stacking and spreading of 40mm crusher broken metal black trap, basalt or granite uniformly in substation yard in desired thickness, free from dust and foreign matter,including transportation up to site, lead and lift, T&P, labour,royalty and taxes etc. complete as directed by Engineer-in-charge.

12 NSOR, 3000110, "Providing & Laying stone crusher dust (1st layer) and mix of stone crusher dust & cement (2nd layer) in substation yard as indicated below (applicable for other than B.C.soil strata) : (a) 1st layer : Providing & Laying stone crusher dust (free from organic matter and foreign matters etc.) of average thickness 50 mm including spreading, watering so as to attain desired degree of moisture for optimum compaction, compaction by light roller, making top surface levelled, even and smooth etc. for all lead & lift including cost of all material, transportation, royalty, taxes, levies, labour charges, T&P and other consumable etc. complete as directed by Engineer-in-charge..(b) 2nd layer : Providing & Laying mixture of stone crusher dust (free from organic matter and foreign matters etc.) and cement in ratio of 1 : 14 (1 cement : 14 stone crusher dust, the quantity of cement shall not be less than 1 standard bag of 50 Kg. in 0.5 Cum of stone crusher dust) of minimum thickness 50 mm including mixing of stone crusher dust and cement in mixer with desired water cement ratio, laying, vibration, curing etc.complete to give a perfect cohesive, smooth & even surface , finishing as per requirement ,cleaning etc. including all lead & lift and cost of all material, transportation, royalty, taxes, levies, labour charges, T&P and other consumable etc. complete as directed by Engineer-in-charge Note: This item shall not be executed without prior permission of CE(Civil-Trans.)/CE(EHT: C) The quantity of stone crusher dust shall be measured in volumetric terms also so as to exercise cross check."

3004834, Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 20mm nominal size graded stone aggregate. M-15 - Grade concrete

3000140, Providing & Fixing in position LDPE Film of 150 micron (0.15 mm ) , ISI mark- 2508 (Grade 231) , including heat sealed joints at ends as per IS 9698 including cost of all material, labour, T&P, taxes, transportation etc. complete as directed by Engineer in charge

3004847, Centering and shuttering including strutting, propping etc. and removal of form work for : Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth.