MP Power Transmission Company Limited Tender

5.16.1(SOR w.e.f 01.12.2020)Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete . (Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on "Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification") : Mild steel and Medium Tensile steel bars.

5.16.6(SOR w.e.f 01.12.2020)Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete . (Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on "Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification")Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786

5.9.1(SOR w.e.f 01.12.2020)Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for concrete upto plinth level

5.9.2.1(SOR w.e.f 01.12.2020)Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. Uptoplinthlevel.

5.1.1(SOR w.e.f 01.12.2020)Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : M-20 Grade Concrete

4.1.1.4(SOR w.e.f 01.12.2020)Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 20mm nominal size graded stone aggregate. M-10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate )

11.72 (SOR w.e.f 01.12.2020)"Amendment No 01 dt 29/01/2021.Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic, parking etc. of required colour strength, thickness pattern, surface texture (smooth/rough) and size/shape, conforming to 15658-2006 made by table vibratory method using PU mould, laid in required colour and pattern over 50mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including locking edges with M 15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer's specifications and direction of Engineer-in- Charge."

2.5(SOR w.e.f 01.12.2020)Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m lead and lift up to 1.5 m, disposed soil to be levelled and neatly dressed, All kinds of soil

15.2.1(SOR w.e.f 01.12.2020)Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge: Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).

14 NSORExcavation , Reclaiming & Screening of previously spreaded 40 mm metal as per requirement in yard . Work includes removal of previously spreaded metal ( the excavation upto required depth will be done and all vegetation, roots shall be removed and the soil so obtained shall be cleared of all vegetation , roots and foreign material and will be relaid in the yard and well compacted with light rollers so as to attain the optimum compaction ). The above activities include collection of metal at suitable place, uprooting of vegetation and clearing of all foreign material etc., screening with sieve so as to remove all dust and small particles to get specified 40 mm metal , stacking the same at suitable place after sieving for measurment purpose and will be respread in the yard in desired thickness . The rate includes all labour and T&P, lead & lift etc. complete as per direction of Engineer in charge.

37 NSORProviding & Fixing in position LDPE Film of 150 micron (0.15 mm ) , ISI mark- 2508 (Grade 231) , including heat sealed joints at ends as per IS 9698 including cost of all material, labour, T&P, taxes, transportation etc. complete as directed by Engineer in charge

1 NSORSupplying and spreading in EHV Substation yard or road works with hard moorum/ hard copra having maximum dry desnsity not less than 2 MT per cum with stacking, boxing , including cost of material, Compaction with watering ( Minimum compaction 95% of MDD) , T&P, Royalty, all lead & lift etc. complete in layers not exceeding 200 mm , as per specifications and direction of Engineer-in-Charge.

8 NSORSupply,stacking and spreading of 40mm crusher broken metal black trap, basalt or granite uniformly in substation yard in desired thickness, free from dust and foreign matter,including transportation up to site, lead and lift, T&P, labour,royalty and taxes etc. complete as directed by Engineer-in-charge.

16 NSORLabour only for fixing bolts of any length i/c weight of nuts & washers , etc. complete as per direction of Engineer in charge.