MP Power Transmission Company Limited Tender

132KV Equipments:- All the connections and jumper of old 132 KV CT from bay have to be removed and dismantled from the Structure and kept at the designated place.

132KV Equipments:- Shifting of 132 KV isolator upto civil foundation & placements of complete isolator in all 3 phase of isolator structure.

132KV Equipments:- All the connections and jumper of old 132 KV Isolator from bay have to be removed and dismantled from the Structure and kept at the designated place.

132KV Equipments:- Shifting of 132 KV LA upto civil foundation & placement on structure including all accessories etc.

132KV Equipments:- All the connections and jumper of old 132 KV LA from bay have to be removed and dismantled from the Structure and kept at the designated place.

33KV Equipments :- Shifting of 33 KV CT upto civil foundation and placement on structure including all accessories etc.

33KV Equipments :- All the connections and jumper of 33 KV CT from bay have to be removed and dismantled from the Structure and kept at the designated place.

33KV Equipments :- Shifting of 33 KV isolator upto civil foundation & placements of complete isolator in all 3 phase of isolator structure.

33KV Equipments :- All the connections and jumper of 33 KV Isolator from bay have to be removed and dismantled from the Structure and kept at the designated place.

33KV Equipments :- Shifting of 33 KV LA upto civil foundation & placement on structure including all accessories etc.

33KV Equipments :- All the connections and jumper of old 33 KV LA from bay have to be removed and dismantled from the Structure and kept at the designated place.

Cable laying and associate works :- Laying of copper cables (armoured/unarmoured) on racks/cable trays/ angle support overhead racks conduits including dressing of cables with accessories for copper conductor & armoured control cables. Details of cables to be provided are as under: 2 Core x 2.5 Sq.mm. (Unarmoured)

Cable laying and associate works :- Laying of copper cables (armoured/unarmoured) on racks/cable trays/ angle support overhead racks conduits including dressing of cables with accessories for copper conductor & armoured control cables. Details of cables to be provided are as under: 4 Core x 2.5 Sq.mm. (Unarmoured)

Cable laying and associate works :- Laying of copper cables (armoured/unarmoured) on racks/cable trays/ angle support overhead racks conduits including dressing of cables with accessories for copper conductor & armoured control cables. Details of cables to be provided are as under: 8 Core x 2.5 Sq.mm. (Unarmoured)

Cable laying and associate works :- Laying of copper cables (armoured/unarmoured) on racks/cable trays/ angle support overhead racks conduits including dressing of cables with accessories for copper conductor & armoured control cables. Details of cables to be provided are as under: 12 Core x 2.5 Sq.mm. (Unarmoured)

Cable laying and associate works :- Laying of copper cables (armoured/unarmoured) on racks/cable trays/ angle support overhead racks conduits including dressing of cables with accessories for copper conductor & armoured control cables. Details of cables to be provided are as under: 19 Core x 2.5 Sq.mm. (Unarmoured)

Cable terminations including fixing of cable glands, lugs etc. for each type of control/ power cables, including terminations at both ends. I.R. value between cores and I.R. value with respect to its armouring is to be verified. The continuity of all cores is also to be verified. Both work to be done before connecting cable to the terminal block. Making suitable hole in bottom/side plate of C&R panel, AC/DC Board, Marshaling box, CT/PT sec box and CB mechanism box for fixing cable glands in addition to cable gland holes already provided. The hole should be free from burrs. Fixing all cables in respective cable glands and refixing gland plate to its original place. All cable identification plate is to be provided on both ends of each cable. Stripping of outer insulation cover , armouring etc. of cable, fixing ferrules on each core at both ends. Stripping all cores to suitable length, making eye, crimping terminal lugs (as the case may be ) and fixing it to terminal block as per drawing followed by proper bending/ dressing of all cores. 2 Core x 2.5 Sq.mm. (Unarmoured)

Cable terminations including fixing of cable glands, lugs etc. for each type of control/ power cables, including terminations at both ends. I.R. value between cores and I.R. value with respect to its armouring is to be verified. The continuity of all cores is also to be verified. Both work to be done before connecting cable to the terminal block. Making suitable hole in bottom/side plate of C&R panel, AC/DC Board, Marshaling box, CT/PT sec box and CB mechanism box for fixing cable glands in addition to cable gland holes already provided. The hole should be free from burrs. Fixing all cables in respective cable glands and refixing gland plate to its original place. All cable identification plate is to be provided on both ends of each cable. Stripping of outer insulation cover , armouring etc. of cable, fixing ferrules on each core at both ends. Stripping all cores to suitable length, making eye, crimping terminal lugs (as the case may be ) and fixing it to terminal block as per drawing followed by proper bending/ dressing of all cores. 4 Core x 2.5 Sq.mm. (Unarmoured)

Cable terminations including fixing of cable glands, lugs etc. for each type of control/ power cables, including terminations at both ends. I.R. value between cores and I.R. value with respect to its armouring is to be verified. The continuity of all cores is also to be verified. Both work to be done before connecting cable to the terminal block. Making suitable hole in bottom/side plate of C&R panel, AC/DC Board, Marshaling box, CT/PT sec box and CB mechanism box for fixing cable glands in addition to cable gland holes already provided. The hole should be free from burrs. Fixing all cables in respective cable glands and refixing gland plate to its original place. All cable identification plate is to be provided on both ends of each cable. Stripping of outer insulation cover , armouring etc. of cable, fixing ferrules on each core at both ends. Stripping all cores to suitable length, making eye, crimping terminal lugs (as the case may be ) and fixing it to terminal block as per drawing followed by proper bending/ dressing of all cores. 8 Core x 2.5 Sq.mm. (Unarmoured)

Cable terminations including fixing of cable glands, lugs etc. for each type of control/ power cables, including terminations at both ends. I.R. value between cores and I.R. value with respect to its armouring is to be verified. The continuity of all cores is also to be verified. Both work to be done before connecting cable to the terminal block. Making suitable hole in bottom/side plate of C&R panel, AC/DC Board, Marshaling box, CT/PT sec box and CB mechanism box for fixing cable glands in addition to cable gland holes already provided. The hole should be free from burrs. Fixing all cables in respective cable glands and refixing gland plate to its original place. All cable identification plate is to be provided on both ends of each cable. Stripping of outer insulation cover , armouring etc. of cable, fixing ferrules on each core at both ends. Stripping all cores to suitable length, making eye, crimping terminal lugs (as the case may be ) and fixing it to terminal block as per drawing followed by proper bending/ dressing of all cores. 12 Core x 2.5 Sq.mm. (Unarmoured)

Cable terminations including fixing of cable glands, lugs etc. for each type of control/ power cables, including terminations at both ends. I.R. value between cores and I.R. value with respect to its armouring is to be verified. The continuity of all cores is also to be verified. Both work to be done before connecting cable to the terminal block. Making suitable hole in bottom/side plate of C&R panel, AC/DC Board, Marshaling box, CT/PT sec box and CB mechanism box for fixing cable glands in addition to cable gland holes already provided. The hole should be free from burrs. Fixing all cables in respective cable glands and refixing gland plate to its original place. All cable identification plate is to be provided on both ends of each cable. Stripping of outer insulation cover , armouring etc. of cable, fixing ferrules on each core at both ends. Stripping all cores to suitable length, making eye, crimping terminal lugs (as the case may be ) and fixing it to terminal block as per drawing followed by proper bending/ dressing of all cores. 19 Core x 2.5 Sq.mm. (Unarmoured)

Earthing works including construction of earth pits and associated brick messonary work, laying of flats and installation of earth rod etc.:- Preparation of earthing pits (1.5x1.5x3.0 Mtrs.) (as per drawing)

Earthing works including construction of earth pits and associated brick messonary work, laying of flats and installation of earth rod etc.:- MS Flat 65x8 mm

Earthing works including construction of earth pits and associated brick messonary work, laying of flats and installation of earth rod etc.:- MS Flat 50x8 mm

Stringing & Jumpering Twin zebra conductor (in Mtrs)