MP Power Transmission Company Limited Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
MP Power Transmission Company Limited - MPPTCL Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date18 Jul 2023
Closing Date11 Dec 2023
Tender Amount₹ 87,75,000
Costs
EMD
₹ 1,75,500Document Cost
₹ 2,360Tender Fee
₹ 1,036
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_MPPTC_292038_1Bid Award Id
ViewTender No
730Tender Authority
MP Power Transmission Company Limited ViewPurchaser Address
-Website
http://https://mptenders.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
R and M of staff Quarters at 400 KV S/s Chhegaon, 220 KV S/s Barwaha, Nimrani, Nepanagar, 132 KV S/s Khargone, Khandwa, Bahadarpur and Matapura Colony Nepanagar 132 KV S/s Premises.
BOQ Items
... More
3004887 ,5.3.1,Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in beams, suspended floors, roofs
12
73860
6155
... More
3004897 ,5.9.3,Centering and shuttering in cluding strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform.
150
65940
439.6
... More
3004929 ,5.16.6,Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages
600
37740
62.9
... More
3004995 ,6.6.1,Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg/cm2 and water absorpt ion not more than 20% in superstructure above plinth level and up to floor two level
30
136230
4541
... More
3005211 ,9.18.1,Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board ..35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
122
317200
2600
... More
3005536 ,9.166.2,Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and .......... out of which 75mm shall be flat and 20mm shall be tapered in 45 degree
84
209160
2490
... More
3005271 ,9.43.2,Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
140
14000
100
... More
3005305 ,9.57.1,Providing and fixing 300x16 mm ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete:
56
9520
170
... More
3005307 ,9.58.1,Providing and fixing 250x10 mm ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :
56
3808
68
... More
3005312 ,9.60.1,Providing and fixing 300x20x6 mm ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete :
28
2016
72
... More
3005314 ,9.61.1,Providing and fixing 125 mm ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :
140
3780
27
... More
3006146 ,13.2.1,15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement : 4 sand)
1040
168480
162
... More
3006180 ,13.27.1,Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete G.I. chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails before plastering upt 10 meter height.
300
18600
62
... More
3006148 ,13.3.1,20 mm cement plaster of mix : 1:4 (1 cement : 4 sand)
780
167700
215
... More
3006457 ,15.15.1,Taking out doors, windows and clerestory windows (Steel or wood) ….within 50 meters lead...Of area 3 sqm and below
100
3300
33
... More
3006458 ,15.15.2,Of area beyond 3 sqm
2
88
44
... More
3006596 ,17.1.1,Providing and fixing water closet squatting pan including cutting and making good the walls and floors wherever required : White Vitreous china pattern W.C. pan of size 580x440mm with integral type foot rests.
5
14975
2995
... More
3006598 ,17.2.1,Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, including cutting and making good the walls and floors wherever required :
12
36432
3036
... More
3006619 ,17.11.1,Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, C.P. brass pillar taps.
28
68880
2460
... More
3006638 ,17.14.2.2,Kitchen sink without drain board 610x460 mm bowl depth 200 mm.
28
121828
4351
... More
3006819 ,17.64.2.2,Flexible 40 mm dia pipe (only in residential & complaxes)
56
5488
98
... More
3006923 ,18.6.2.1,Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, as per direction of Engineer in Charge….15 mm nominal outer dia .Pipes.
250
51750
207
... More
3006929 ,18.7.3,Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 25 mm nominal outer dia .Pipes as per direction of Engineer in Charge.
150
27750
185
... More
3007122 ,18.12.1.1,With C.I. wheel of approved quality (screwed end)..25 mm nominal bore.
28
13608
486
... More
3007123 ,18.12.1.2,With C.I. wheel of approved quality (screwed end)..32 mm nominal bore.
5
2790
558
... More
3007210 ,18.28,Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701
14000
98000
7
... More
3007217 ,18.33,Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm, 15 mm nominal bore
56
30464
544
... More
3007218 ,18.34,Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore.
28
21784
778
... More
3007269 ,18.61,Providing and fixing CP jet assembly to including connection etc complete.
12
4500
375
... More
3007291 ,19.4.1,Providing and laying below ground unplasticised PVC pipe ……….. all necessary fittings etc. complete. Excavation to be paid seperataly….110 mm diameter OD
252
58968
234
... More
3007292 ,19.4.2,Providing and laying below ground unplasticised PVC pipe ……….. all necessary fittings etc. complete. Excavation to be paid seperataly...160 mm diameter OD
168
80136
477
... More
3007366 ,19.27.1,Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design :-With well burnt bricks
28
110348
3941
... More
3007373 ,19.31,Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete design.
5
15860
3172
... More
3007474 ,21.1.2.2,Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections sections and other sections of approved make conforming to IS: 733 and IS: 1285
660
227700
345
... More
3007479 ,23.3.1,Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) :
140
108360
774
... More
3007491 ,21.9,Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings
150
7950
53
... More
3007500 ,21.15.2,Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.
50
2850
57
... More
3007524 ,22.14.1,Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)
21
137949
6569
... More
3006376 ,14.65,Providing & casting & Repairing of excessively damaged members
with micro-concrete at all levels with all leads & lift or as directed including formwork, centering, scaffolding, and mixing, laying, levelling, and finishing including curing etc. complete (excluding steel reinforcement
20
1220
61
... More
3006415 ,14.80.1,Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: easurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2)-12 mm average thickness
840
163800
195
... More
3007534 ,22.22,Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of(i) Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely.(ii) Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80%-chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2ndcoat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the
coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per anufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1
st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area.
(iv) The treated area should be cure with water for 48 hrs. by flooding the surface.
(v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee)
840
390600
465
... More
3007542 ,22.3,Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush.
150
8250
55
... More
132 KV Khargone Colony
3004755 ,2.9.2 , Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by amming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m
130
20280
156
... More
3004887 ,5.3.1 , Reinforced cement concrete work in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level
4
24620
6155
... More
3004897 ,5.9.3 , Centering and shuttering in cluding strutting, propping etc. and removal of form for:
48
21100
439.6
... More
3004929 ,5.16.6 , Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers
200
12580
62.9
... More
3004995 ,6.6.1 , Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg/cm2 and water absorpt ion not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete.
6
27246
4541
... More
3005211 ,9.18.1 , Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board ............ and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of such as duro board, century or equivelant make.
84
218400
2600
... More
3005536 ,9.166.2 , Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness
36
89640
2490
... More
3005271 ,9.43.2 , Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
120
12000
100
... More
3005305 ,9.57.1 , Providing and fixing 300x16 mm ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete:
42
7140
170
... More
3005307 ,9.58.1 , Providing and fixing 250x10 mm ISI marked oxidised M.S. tower bolt black finish,with necessary screws etc. complete :
42
2856
68
... More
3005312 ,9.60.1 , Providing and fixing 300x20x6 mm ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete :
42
3024
72
... More
3005314 ,9.61.1 , Providing and fixing 125 mm ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :
84
2268
27
... More
3006147 ,13.2.2 , 15 mm cement plaster on the rough side of single or half brick wall of mix
210
31080
148
... More
3006180 ,13.27.1 , Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete
210
13020
62
... More
3006149 ,13.3.2 , 20 mm cement plaster of mix :
210
41370
197
... More
3006206 ,13.41 , Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete.
3980
294520
74
... More
3006279 ,14.1 , Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sqm……within 50 meters lead.
140
25200
180
... More
3006457 ,15.15.1 , Taking out doors, windows and clerestory windows (Steel or wood) ….within 50 meters lead.
65
2145
33
... More
3006596 ,17.1.1 , Providing and fixing water closet squatting pan including cutting and making good the walls and floors wherever required :
4
11980
2995
... More
3006598 ,17.2.1 , Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid
2
6072
3036
... More
3006619 ,17.11.1 , Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard patternbrass pillar taps.
12
29520
2460
... More
3006638 ,17.14.2.2 , Kitchen 610x460 mm bowl depth 200 mm. sink without drain board
12
52212
4351
... More
3006819 ,17.64.2.2 , Flexible pipe 40 mm dia (only in residential & complaxes)
42
4116
98
... More
3006923 ,18.6.2.1 , Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, as per direction of Engineer in Charge...15 mm nominal outer dia .Pipes.
210
43470
207
... More
3006929 ,18.7.3 , Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, as per direction of Engineer in Charge.
180
33300
185
... More
3007122 ,18.12.1.1 , With C.I. wheel of approved quality (screwed end)..25 mm nominal bore.
21
10206
486
... More
3007123 ,18.12.1.2 , With C.I. wheel of approved quality (screwed end)..32 mm nominal bore.
5
2790
558
... More
3007210 ,18.28 , Providing and placing on terrace (at all floor levels) polyethylene water storage tank
10500
73500
7
... More
3007217 ,18.33 , Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm, 15 mm nominal bore
42
22848
544
... More
3007218 ,18.34 , Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore.
21
16338
778
... More
3007291 ,19.4.1 , Providing and laying below ground unplasticised PVC pipe ……….. all necessary fittings etc. complete. Excavation to be paid seperataly...110 mm diameter OD
252
58968
234
... More
3007292 ,19.4.2 , Providing and laying below ground unplasticised PVC pipe ……….. all necessary fittings etc. complete. Excavation to be paid seperataly...160 mm diameter OD
130
62010
477
... More
3007366 ,19.27.1 , Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design :-With well burnt bricks
21
82761
3941
... More
3007373 ,19.31 , Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design.
3
9516
3172
... More
3007474 ,21.1.2.2 , Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size,
630
217350
345
... More
3007479 ,23.3.1 , Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) :
136
105264
774
... More
3007491 ,21.9 , Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality
50
2650
53
... More
3007500 ,21.15.2 , Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.
110
6270
57
... More
3007524 ,22.14.1 , Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)
16
105104
6569
... More
3006376 ,14.65 , Providing & casting & Repairing of excessively damaged members
with micro-concrete at all levels with all leads & lift or as directed including formwork, centering, scaffolding, and mixing, laying, levelling, and finishing including curing etc. complete (excluding steel reinforcement
105
6405
61
... More
3006415 ,14.80.1 , Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: easurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2)-12 mm average thickness
400
78000
195
... More
3007534 ,22.22 , Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of(i) Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely.(ii) Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80%-chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2ndcoat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the
coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per anufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1
st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area.
(iv) The treated area should be cure with water for 48 hrs. by flooding the surface.
(v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee)
400
186000
465
... More
3007542 ,22.3 , Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush.
126
6930
55
... More
3006156 ,13.8 , 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand)
210
20160
96
... More
132Kv S/s Khandwa Colony 3005212, 9.18.2, Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. direction of Engineer-inCharge.
61
22631
371
... More
3005529, 9.16, Providing and fixing UPVC panelled door shutter UPVC 30 mm thick factory made PVC or UPVC door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side.
34
68884
2026
... More
3005211, 9.18.1, Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
15
39000
2600
... More
3005404, 9.101.2, Providing and fixing chromium plated brass sliding door bolts ISI marked with nuts and screws etc complete.300x16mm
14
3752
268
... More
3005429, 9.109.1, Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. plete:300*16
14
3374
241
... More
3005430, 9.109.2, Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:250*16
7
1365
195
... More
3005433, 9.110.3, Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 250x10 mm
8
816
102
... More
3005439, 9.113.1, Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:125 mm
12
900
75
... More
3007474, 21.1.2.2, Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.
350
120750
345
... More
3007479, 23.3.1, Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.
150
116100
774
... More
3006285, 14.5.1, Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
15
10185
679
... More
3005270, 9.43.1, Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete...Fixed to steel windows by welding.
150
13650
91
... More
3006455, 15.14.1, Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below
28
2380
85
... More
3006033, 12.32.1, Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion..75 mm diameter (minimum wall thickness 1.8mm)
64
8704
136
... More
3006034, 12.32.2, Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion...110 mm diameter (minimum wall thickness 2.2mm)
80
19040
238
... More
3007210, 18.28, Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
16000
112000
7
... More
3006639, 17.14.2.3, Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board..610x460 mm bowl depth 200 mm
19
65018
3422
... More
3006596, 17.1.1, Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests
19
56905
2995
... More
3006923, 18.6.2.1, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings /c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
108
22356
207
... More
3006925, 18.6.2.3, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings /c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work including cutting chases and making good the walls etc....25 mm nominal outer dia Pipes.
150
43200
288
... More
3006926, 18.6.2..4, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings /c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
110
39600
360
... More
3007291, 19.4.1, Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly.
181
42354
234
... More
3007215, 18.31, Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, 15 mm nominal bore.
51
23358
458
... More
3007218, 18.34, Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore
34
26452
778
... More
3005718, 10.27.1, Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete.
10
7920
792
... More
3007366, 19.27.1, Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design :-With well burnt bricks
12
47292
3941
... More
3007524, 22.14.1, Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)
7
45983
6569
... More
3006376, 14.65, Providing & casting & Repairing of excessively damaged members with micro-concrete at all levels with all leads & lift or as directed including formwork, centering, scaffolding, and mixing, laying, levelling, and finishing including curing etc. complete (excluding steel reinforcement
60
3660
61
... More
3006415, 14.80.1, Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: easurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been atisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2)-12 mm average thickness
290
56550
195
... More
3007534, 22.22, Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of(i) Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely.(ii) Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80%-chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2ndcoat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per anufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area.(iv) The treated area should be cure with water for 48 hrs. by flooding the surface.(v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee)
290
134850
465
... More
3007542, 22.3, Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush.
60
3300
55
... More
3006619, 17.11.1, Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require
11
27060
2460
... More
3006077, 12.5, Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7
48.1
31361
652
... More
3005664, 10.1, Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
220
14300
65
... More
3006002, 1.5, Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S.gusset plates at the junction and corners 25mm dia pulley,40x40x6mm angle and T-ironguide at the top and bottom respectively including applying a priming coat of approved steel primer.
21
13692
652
... More
220Kv S/s Nimrani Colony 3004755, 2.9.2,Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers
60
9360
156
... More
3005211, 9.18.1,Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of such as duro board, century or equivelant make.
32
83200
2600
... More
3005214, 9.19.1,Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202
32
51904
1622
... More
3005536, 9.166.2,Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness
24
59760
2490
... More
3005271, 9.43.2,Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc.
80
8000
100
... More
3005305, 9.57.1,Providing and fixing 300x16 mm ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete:
16
2720
170
... More
3005307, 9.58.1,Providing and fixing 250x10 mm ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :
32
2176
68
... More
3005312, 9.60.1,Providing and fixing 300x20x6 mm ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete :
16
1152
72
... More
3005314, 9.61.1,Providing and fixing 125 mm ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :
48
1296
27
... More
3006146, 13.2.1,15 mm cement plaster on the rough side of single or half brick wall of mix
80
12960
162
... More
3006180, 13.27.1,Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete
80
4960
62
... More
3006148, 13.3.1,20 mm cement plaster of mix :1:4 (1 cement : 4 sand)
120
25800
215
... More
3006206, 13.41,Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete.
1835
135790
74
... More
3006156, 13.8,6 mm cement plaster of mix : 1:3 (1 cement : 3 sand)
80
7680
96
... More
3006279, 14.1,Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 qm……within 50 meters lead. With cement mortar 1:4
60
10800
180
... More
3006457, 15.15.1,Taking out doors, windows and clerestory windows (Steel or wood) ….within 50 meters lead.
72
2376
33
... More
3006598, 17.2.1,Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, including cutting and making good the walls and floors
1
3036
3036
... More
3006619, 17.11.1,Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, C.P. brass pillar taps.
8
19680
2460
... More
3006638, 17.14.2.2,Kitchen 610x460 mm bowl depth 200 mm. sink without drain board
8
34808
4351
... More
3006819, 17.64.2.2,Flexible pipe 40 mm dia (only in residential & complaxes)
16
1568
98
... More
3006923, 18.6.2.1,Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,as per direction of Engineer in Charge...15 mm nominal outer dia .Pipes.
48
9936
207
... More
3006925, 18.6.2.3,Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,as per direction of Engineer in Charge...25 mm nominal outer dia .Pipes.
48
13824
288
... More
3006969, 18.7.3,Providing and fixing 25 mm nominal outer dia .Pipes. Chlorinated Polyvinyl Chloride (CPVC) pipes,
60
11100
185
... More
3007122, 18.12.1.1,With C.I. wheel of approved quality (screwed end)..25 mm nominal bore.
8
3888
486
... More
3007210, 18.28,Providing and placing on terrace polyethylene water storage tank
8000
56000
7
... More
3007217, 18.33,Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards
16
8704
544
... More
3007218, 18.34,Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore.
8
6224
778
... More
3007269, 18.61,Providing and fixing CP jet assembly to including connection etc complete.
1
375
375
... More
3007291, 19.4.1,Providing and laying below ground unplasticised PVC pipe all necessary fittings etc. complete. Excavation to be paid seperataly...110 mm diameter OD
96
22464
234
... More
3007292, 19.4.2,Providing and laying below ground unplasticised PVC pipe all necessary fittings etc. complete. Excavation to be paid seperataly..160 mm diameter OD
60
28620
477
... More
3007366, 19.27.1,Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design :-With well burnt bricks
8
31528
3941
... More
3007373, 19.31,Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design.
2
6344
3172
... More
3007474, 21.1.2.2,Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make
240
82800
345
... More
3007480, 23.3.2,Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc.
56
53088
948
... More
3007491, 21.9,Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality
100
5300
53
... More
3007500, 21.15.2,Providing and fixing Powder coated minimum thickness 50 micron aluminium.
80
4560
57
... More
3007524, 22.14.1,Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)
8
52552
6569
... More
3006376, 14.65,Providing & casting & Repairing of excessively damaged members
with micro-concrete at all levels with all leads & lift or as directed including formwork, centering, scaffolding, and mixing, laying, levelling, and finishing including curing etc. complete (excluding steel reinforcement
5
305
61
... More
3006415, 14.80.1,Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: easurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2)-12 mm average thickness
180
35100
195
... More
3007534, 22.22,Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of(i) Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely.(ii) Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80%-chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2ndcoat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the
coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per anufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1
st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area.
(iv) The treated area should be cure with water for 48 hrs. by flooding the surface.
(v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee)
180
83700
465
... More
3007542, 22.3,Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush.
24
1320
55
... More
220 kv Nepanagar Colony
3005534, 9.165, Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturer's specification and direction of Engineer-inCharge.
19
7049
371
... More
3005529, 9.16, Providing and fixing UPVC panelled door shutter UPVC 30 mm thick factory made PVC or UPVC door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the
10
20260
2026
... More
3005211, 9.18.1, Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. ... 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
11
28600
2600
... More
3005403, 9.101.1, Providing and fixing chromium plated brass sliding door bolts ISI marked with nuts and screws etc complete.300x16mm
12
3216
268
... More
3005429, 9.109.1, Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:300*16
12
2892
241
... More
3005430, 9.109.2, Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:250*16
8
1560
195
... More
3005433, 9.110.3, Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 250x10 mm
8
816
102
... More
3005439, 9.113.1, Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:125 mm
14
1050
75
... More
3007474, 21.1.2.2, Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
100
34500
345
... More
3005270, 9.43.1, Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete...Fixed to steel windows by welding.
144
13104
91
... More
3006455, 15.14.1, Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below
8
680
85
... More
3006033, 12.32.1, Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion..75 mm diameter (minimum wall
thickness 1.8mm)
18
2448
136
... More
3007210, 18.28, Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
1500
10500
7
... More
3006619, 17.11.1, Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls herever require :
3
7380
2460
... More
3006596, 17.1.1, Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440mm with
integral type foot rests
3
8985
2995
... More
3006923, 18.6.2.1, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings /c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work including cutting chases and making good the walls etc....15 mm nominal outer dia Pipes.
30
6210
207
... More
3006925, 18.6.2.3, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings /c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work including cutting chases and making good the walls etc.......25 mm nominal outer dia Pipes.
30
8640
288
... More
3007291, 19.4.1, Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly.
97
22698
234
... More
3006285, 14.5.1, Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
3
2037
679
... More
3007215, 18.31, Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, 15 mm nominal bore.
9
4122
458
... More
3007218, 18.34, Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore
3
2334
778
... More
3005718, 10.27.1, Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete.
4
3168
792
... More
3007480, 23.3.2, Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc.
20
18960
948
... More
3007366, 19.27.1, Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design :-With well burnt bricks
3
11823
3941
... More
3007524, 22.14.1, Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)
8
52552
6569
... More
3006376, 14.65, Providing & casting & Repairing of excessively damaged members with micro-concrete at all levels with all leads & lift or as directed including formwork, centering, scaffolding, and mixing, laying, levelling, and finishing including curing etc. complete (excluding steel reinforcement
3
183
61
... More
3006415, 14.80.1, Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: easurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been atisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2)-12 mm average thickness
148
28860
195
... More
3007534, 22.22, Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of(i) Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely.(ii) Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80%-chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2ndcoat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per anufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area.(iv) The treated area should be cure with water for 48 hrs. by flooding the surface.(v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee)
148
68820
465
... More
3007542, 22.3, Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush.
15
825
55
... More
Matapur Colony Nepanagar
3005534 ,9.165 , Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame.
16
5936
371
... More
3005529 ,9.16 , Providing and fixing UPVC panelled door shutter UPVC 30 mm thick factory made PVC or UPVC door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side.
9
18234
2026
... More
3005211 ,9.18.1 , Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. ... 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
10.4
27040
2600
... More
3005403 ,9.101.1 , Providing and fixing chromium plated brass sliding door bolts ISI marked with nuts and screws etc complete.300x16mm
10
2680
268
... More
3005429 ,9.109.1 , Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:300*16
6
1446
241
... More
3005430 ,9.109.2 , Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:250*16
6
1170
195
... More
3005433 ,9.110.3 , Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 250x10 mm
6
612
102
... More
3005439 ,9.113.1 , Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:125 mm
12
900
75
... More
3007474 ,21.1.2.2 , Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733
90
31050
345
... More
3007479 ,21.3.1 , Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) :
15
11610
774
... More
3006285 ,14.5.1 , Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
3.9
2648
679
... More
3005270 ,9.43.1 , Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete...Fixed to steel windows by welding.
200
18200
91
... More
3006455 ,15.14.1 , Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below
6
510
85
... More
3006033 ,12.32.1 , Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion..75 mm diameter (minimum wall thickness 1.8mm)
15
2040
136
... More
3006034 ,12.32.2 , Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion...110 mm diameter (minimum wall thickness 2.2mm)
15
3570
238
... More
3007210 ,18.28 , Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
1500
10500
7
... More
3006619 ,17.11.1 , Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :
3
7380
2460
... More
3006596 ,17.1.1 , Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests
3
8985
2995
... More
3006923 ,18.6.2.1 , Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings /c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work including cutting chases and making good the walls etc....15 mm nominal outer dia Pipes.
25
5175
207
... More
3006924 ,18.6.2.2 , Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings /c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work including cutting chases and making good the walls etc....20 mm nominal outer dia Pipes.
20
4680
234
... More
3006926 ,18.6.2.4 , Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings /c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
10
3600
360
... More
3007291 ,19.4.1 , Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly.
112
26208
234
... More
3007215 ,18.31 , Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, 15 mm nominal bore.
10
4580
458
... More
3007218 ,18.34 , Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore
4
3112
778
... More
3005718 ,10.27.1 , Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete.
5
3960
792
... More
3005179 ,9.6.8 , Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured).
15
22980
1532
... More
3007366 ,19.27.1 , Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design :-With well burnt bricks
3
11823
3941
... More
3007524 ,22.14.1 , Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)
9
59121
6569
... More
3006376 ,14.65 , Providing & casting & Repairing of excessively damaged members with micro-concrete at all levels with all leads & lift or as directed including formwork, centering, scaffolding, and mixing, laying, levelling, and finishing including curing etc. complete (excluding steel reinforcement
10
610
61
... More
3006415 ,14.80.1 , Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: easurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been atisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2)-12 mm average thickness
175
34125
195
... More
3007534 ,22.22 , Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of(i) Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely.(ii) Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80%-chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2ndcoat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per anufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area.(iv) The treated area should be cure with water for 48 hrs. by flooding the surface.(v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee)
175
81375
465
... More
3007542 ,22.3 , Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush.
20
1100
55
... More
132Kv S/s Bahadarpur Colony 30055349.18.2Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturer's specification and direction of Engineer-inCharge.
16
5936
371
... More
30055299.16Providing and fixing UPVC panelled door shutter UPVC 30 mm thick factory made PVC or UPVC door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the
8
16208
2026
... More
30052119.18.1Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. ... 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
5
13000
2600
... More
30054039.101.2Providing and fixing chromium plated brass sliding door bolts ISI marked with nuts and screws etc complete.300x16mm
6
1608
268
... More
30054299.109.1Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. plete:300*16
8
1928
241
... More
30054309.109.2Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:250*16
4
780
195
... More
30054339.110.3Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 250x10 mm
8
816
102
... More
30054399.113.1Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:125 mm
12
900
75
... More
300747421.1.2.2Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.
20
6900
345
... More
300747921.3.1Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) :
10
7740
774
... More
300628514.5.1Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Z
4
2716
679
... More
30052709.43.1Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete...Fixed to steel windows by welding.
100
9100
91
... More
300645515.14.1Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below
6
510
85
... More
300603312.32.1Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion..75 mm diameter (minimum wall thickness 1.8mm)
15
2040
136
... More
300603412.32.2Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion...110 mm diameter (minimum wall thickness 2.2mm)
15
3570
238
... More
300721018.28Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
1000
7000
7
... More
300663817.14.2.2Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board..610x460 mm bowl depth 200 mm
2
8702
4351
... More
300661917.11.1Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :
2
4920
2460
... More
300659617.1.1Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests
2
5990
2995
... More
300692318.6.2.1Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings /c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work including cutting chases and making good the walls etc....15 mm nominal outer dia Pipes.
25
5175
207
... More
300692518.6.2.3Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings /c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. -25 mm nominal outer dia .Pipes.
10
2880
288
... More
300729119.4.1Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly.-110 mm diameter OD (min. wall thickness 3.2mm)
12
2808
234
... More
300721518.31Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, 15 mm nominal bore.
4
1832
458
... More
300721818.34Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore
2
1556
778
... More
300571810.27.1Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete.
2
1584
792
... More
300736619.27.1Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design :-With well burnt bricks
2
7882
3941
... More
300752422.14.1Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)
5
32845
6569
... More
300637614.65Providing & casting & Repairing of excessively damaged members with micro-concrete at all levels with all leads & lift or as directed including formwork, centering, scaffolding, and mixing, laying, levelling, and finishing including curing etc. complete (excluding steel reinforcement
5
305
61
... More
300641514.80.1Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: easurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been atisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2)-12 mm average thickness
66
12870
195
... More
300753422.22Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of(i) Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely.(ii) Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80%-chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2ndcoat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per anufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area.(iv) The treated area should be cure with water for 48 hrs. by flooding the surface.(v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee)
66
30690
465
... More
300754222.3Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush.
15
825
55
... More
300566410.1Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
50
3250
65
... More
30060021.5Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S.gusset plates at the junction and corners 25mm dia pulley,40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer.
6
3912
652
... More
400Kv S/s Chhageon
3005188,9.8.2.2, Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Kiln seasoned and chemically treated Haldu, Kail, Bija wood 30 mm thick
5
12370
2474
... More
3005216,9.19.3, Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws.
20
30660
1533
... More
3005430,9.109.2, Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 250x16 mm
15
2925
195
... More
3005433,9.110.3, Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 250x10 mm
15
1530
102
... More
3005706,10.22.2, Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In granite frame guard bars..
50
4250
85
... More
3000120,22NSOR
4.5, Providing & Fixing 32 mm dia. chromium plated brass or suitable alloy flush valve(heavy duty) push type or quarter turn of Johnson,Parryware, Plumber, Jaguar or equivelent make fitted with all necessary fittings, including cutting,chasing and making good the walls after concealment in C.M. 1:3 complete as directed by the Engineer-in-Charge.
2
1980
990
... More
3006923,18.6.2.1, Concealed work including cutting chases and making good the walls etc.15 mm dia pipes
5
1035
207
... More
3006924,18.6.2.2, Concealed work including cutting chases and making good the walls etc.20 mm dia pipes
5
1170
234
... More
3006925,18.6.2.3, Concealed work including cutting chases and making good the walls etc.25 mm dia pipes
5
1440
288
... More
3006927,18.7.1, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work in 15 mm dai pipes
15
1830
122
... More
3006929,18.7.3, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work in 25 mm dai pipes
10
1850
185
... More
3006931,18.7.5, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work in 40 mm dai pipes
300
97200
324
... More
3007122,18.12.1.1, Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : with CI wheel screwed end:- 25 mm nominal bore
2
972
486
... More
3007124,18.12.1.3, Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : with CI wheel screwed end:- 40 mm nominal bore
1
677
677
... More
3007211,18.29.1, Providing and fixing brass bib cock of approved quality, 15mm nominal bore
8
2448
306
... More
3007213,18.30.1, Providing and fixing brass stop cock of approved quality : 15 mm nominal bore
2
636
318
... More
3007292,19.4.2, Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly. 160 mm daimeter 4 mm thickness
30
14310
477
... More
3006661,17.29.1, Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : flat back wash basin 6308450 mm
2
2758
1379
... More
3007374,19.32.1, Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 sand) including testing of joints etc. complete : 100 mm dia
2
596
298
... More
3007375,19.32.2, Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 sand) including testing of joints etc. complete : 150 mm dia
3
1233
411
... More
3007306,19.7.1.1, Providing and fixing square- mouth S.W. gully trap class SP1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100 *100 mm size P type:- with well burnt bricks
2
3528
1764
... More
3006034,12.32.2, Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.110 mm daimeter wall thickness 2.2 mm minimum
8
1904
238
... More
3006596,17.1.1, Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White vitrous China Orisa pattern WC pan 580*440 mm
1
2995
2995
... More
3006598,17.2.1, Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : WC pan with plastic solid cover
1
3036
3036
... More
3006638,17.14.2.2, Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :-610x460 mm bowl depth 200 mm.
2
8702
4351
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements