MP Police Housing And Infrastructure Development Corporation Limited Tender

H Beam 15 Mtr Long 152x152 or 150x150 mm 37.1 Kg/Mtr. Weight

POLYMER PIN INSULATOR Supplying and fixing polymer type 11KV / 33KV pin insulator with GI pin, of approved make on existing pole or bracket with other necessary materials complete as required.

(i) 11 KV 5 KN PIN Composite Polymer Insulator

AAC DOG Conductor 0.10 sq. inch (100sq. mm. Al.Eq) Supplying and drawing AAAC conductor of approved make with stringing making off complete with binding at existing insulator, jointing, jumpering, teeing off connecting etc. as required and clearing of obstacles (if any).

AAAC RACOON Conductor 0.075 sq. inch (80sq. mm. Al.Eq) Supplying and drawing AAAC conductor of approved make with stringing making off complete with binding at existing insulator, jointing, jumpering, teeing off connecting etc. as required and clearing of obstacles (if any).

Aluminium Binding Wire and Tapes upply & fixing of Aluminium Binding Wire and Tape complet as per specification.

ANTI CLIMBING DEVICE BARBED WIRE Supplying and fixing 2 ply 12 gauge barbed wire around the existing HT/LT electric pole for safety measures as per IE rules including all stapples and all other necessary materials complete as required as per specifications.As per enclosed drwaing no.1.

STAY SET Supplying and erection of GI/MS stay set complete with stay rod, anchor plate of size 300x300x5mm, thimble, stay clamp, turn buckle, bow tightener etc. with stay wire, strain insulator, nut bolts as per specifications including excavation in all type of soil/ rocks and foundation in cement concrete 1:3:6 of required size and other necessary materials complete as required as per specifications

(i) GI Stay Rod 20mm dia (Painted) 1.8 m long with 7/4.00 mm (7/8 SWG) stay wire for HT line

(ii) GI Stay Rod 16mm dia (Painted) 1.8 m long with 7/3.15(7/10SWG)mm stay wire for LT line.

DANGER BOARD ENAMELED Providing and fixing enamelled danger caution plate/board on existing electric poles or wherever required of size 250x200 mm, made of 1.6mm thick mild steel sheet and vitreous enamelled white, with latest, figures and the conventional skull and cross-bones in signal red colour (as per IS-5-1978 with latest amendment) on the front side. The rear side of the plate shall also be enamelled. The corner of the plate shall be rounded off with required material such as screws, wires clamps, nut bolts etc. complete.

(i) 11 KV

EARTHING COIL OF 115 TURNS OF 50 MM DIA.2.5 MTR.LEAD OF 4.0 MM G.I.WIRE Providing and fixing earthing arrangement for HT/LT poles with 8SWG GI lead of 115 turns of 50 mm dia. connection with pole / cross arm / control junction box on pole with 4 mm dia. GI lead through 20 mm dia A class GI protection pipe of 2.5 m length duly bend, packing of charcoal powder and salt as per specification including excavation of pit in all type of soil / rock, refilling of pit by black cotton soil etc. complete

DTR 11/0.4 KV CONVENTIONAL 3 STAR RATING TYPE Supplying installing, connecting, testing and commissioning of 3 Phase, 50 Hz, 11/0.433 KV , Delta/Star connected, Aluminium/Copper wound, oil filled, Indoor/outdoor type, Distribution/Station transformer of accepted standard specification, 3 star catagory class, with accessories such as drain & filter valve, earthing terminals, lifting arrangements of suitable size, dehydrating breather with silica gel of suitable size, Conservator tank, air release devise, Rating & diagram plate including CI rollers, Radiators with shut off valve, Cable end boxes on HT & LT side bushings, Explosion vent with diaphragm, Off load tap changing switch, Buchholz relay, thermometer pocket with 6” dial type thermometer & OTI, wherever required complete with first filling of oil with installation on existing DP structure or foundation etc. complete as per specification. The no load and full load losses should not be more than as mentioned below

3. DTR 11/0.4 KV BIS EE-Level-2 200 KVA

LT DISTRIBUTION BOX WITH HRC FUSE FOR 100 KVA DTR Providing and fixing outdoor type pole mounting weather, dust and vermin proof LT distribution box made of 14 /16 gauge MS sheet with clamping arrangements, lockable hinged door duly painted on all sides with red oxide after antirust and corrosion treatment, two coats of synthetic enamel paints of approved make and shade, consisting of following fittings. L.T. Distribution box suitable for 63/100/200/315 kva transformer (without TPN Switches) with required amp MCCb/Isolator on incoming side and PF HRC units on outgoing side. or

(b)For 200 KVA Transformer (400amp isolator of 9 SP/HRC of 160/200amp & 9 no. J type al hook.) TPMCCB 315 amp 35 ka Breaking capacity completes as required as per mpsseb latestt notification

(ii) 11 KV (45KN) Disc Polymer L.Rod type T&C Insulator with 11 KV Composite Polymer Strain set with hard ware suitable for panther conductor w L.ROD type T&C Insulator complete

Supplying Installatin Testing and Commissioning of D.P. structurre over existing support with painting in an approved manner consisting of following:- (a) D.C. cross arm with clamp and nuts bolts (100x50x6mm channel) – 1Set (b) 11KV D.O. fuse unit, lighting arrester and A.B. switch mounting channels with nuts and bolts (75x40x6mm channel) as required –1 set. (c) Transformer mounting cross arms with clamps nuts and bolts (100x50x6mm. Channels) – 1 set. (d) Transformer clamping set with nuts and bolts etc. complete. (50x50x6mm angle 460 mm long)1 set. (e) Transformer belting set with nuts and bolts etc. complete. – 50x50x6mm angle 1 set. (f) Distribution pannel mounting channel and clamp with nuts and bolts etc. (75x40x6mm channel).-1 set (g) G.I. Pipe(150 mm) A grade/bend as required for cable laying. -1 Job (h) S/f DTR metering -LT 3 phase 4 wire 3x240 volts IB=5 amps lmax x 10 amp, trivector meter class of accuracy 0.5s, DLMS Compliant category A Meters along with GSM (GPRS compatible) modem with box as per MPEB specification complete. Make:- Genus, L&T, Sceure Meters Limited (i) G.I. pipe earthing complete with G.I. strip 25x3 mm as required complete.7 Nos.-1 Set( as per circular no. 1516 (j) A.B. Switch single phasing 400 AMP as per M.P.E.B. norms completed. 1 Set Make :- G.K. Electrical, Kiran, Jaipuria, Atlas, Pactil, Techno fiber, Rashtriya Electrical & Engineering corporation (k) L.A. polymer gapless type as per M.P.E.B. norms specification complete. Make :-Oblum, Elpro, I.G.E., GK, Rajtree, Rastriya Electricals & Engineering corporation (l) 11 KV 200 Amps DO Fuse (3.nos) 1 Set Make :- G.K. Electrical, Kiran, Jaipuria, Atlas, Pactil, Techno fiber, Rashtriya Electrical & Engineering corporation (m)Bentonite compound powder (n) D.P. structure complete as above. Complete as above (a to m)

Providing and fixing chain link fencing sourriding existing DTR S/S finical (37 feet) of 6’ height with chain ling fencing on MS Angle (50X50X6) mm support 7 nos. 7’ height with following feature. (A) Upper & lower frame of fencing will be of MS angle (25X25X4) mm size. (B) MS strip of (25X5) mm flat shall be used fro cross bracing of fencing (C) Double Gate (2 Nos. 2.5’X5’) of MS angle (50X50X6)mm. bracing of 25X5 mm flat with mesh & locking arrangement. (Complete as above AtoC) – one job.

Supplying and fixing of angle / channel / flat iron / RS Joist fittings for over head lines as cross arms / brackets / clamps etc. including nut bolts, required holes, welding, cutting, fabricating with necessary materials including two coats of red oxide and two coats of aluminium or synthetic enamel paint etc. as required.

PVC Alluminium Armoured & XLPE Alluminium Un Armoured CABLES Supplying, laying, testing and commissioning of XLPE insulated and PVC sheathed heavy duty power cable confirming to IS 7098/Part-I/88 with latest amendments, 1100 volts grade armoured cable of approved make with aluminium solid / stranded conductor. The cable shall be laid in air/in existing pipe/in existing cable trench/on existing cable tray with clamp as required as per specifications including providing of metal/PVC cable identification tags at both ends and every 10 Mtr. length of cable with inscriptions there on.

PVC Cable 4 Core Alluminium Armoured 16 SQ.MM

XLPE 1 core unarmoured 150 sqmm Aluminium conductor 1100 Volts

XLPE 1 core unarmoured 300 sqmm Aluminium conductor 1100 Volts

PVC insulated PVC sheathed 3.5 core armoured 70 sqmm Aluminium conductor 1100V

Copper control cable 2 Core 2.5 sqmm (Unarmoured)

Supplying & drawing / laying of PVC insulated XLPE Aerial bunch power cable conductor H2/H4 grade Aluminium Solid/stranded confirming to IS-7098 Part-ll, Alu. Alloy messenger of approved make in Air with necessary material as per specification of required size as mentioned below – 11KV grade Arial Bunch Cable :-

3 x95 + 1 x 80 sq.mm.

11 KV Suspension clamps wwith attachment for AB cable

11 KV Tension clamps ( Dead End) with attachment for AB Cable

Supply and making cable straight joint / end termination with HEAT SHRINKABLE jointing kit complete with all accessories including lugs suitable for 1.1 kV XLPE/HD alum. conductor cable as required as per specification and as per accepted standard including connection testing complete for (I.D../O.D.) termination. Heat shr.jointg. kit 1.1 kV XLPE/HD cable straight through jointing.kit (I.D../O.D.)

3 core 95 sqmm

Providing & Making cable end termination with HEAT SHRINKABLE jointing kit complete with all accessories including lugs suitable for 33 kV/11 kV 3 core XLPE alum. conductor cable as required as per specification and as per accepted standard including connection testing complete. Heat shr.jointg. kit 11 kV XLPE cable O.D. termination

c. 3 x 120-185 sq.mm.

Bi Metallic Clamp for Distribution Transformer Bushing

SITC Bi-metallic clamps suitable for 25mm dia stud and 300sqmm cable

SITC Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC

Supplying and laying of approved Make HDPE pipe as per IS : 4984 and IS : 14333 with latest amendment for installation of submersible pump with necessary connection, socket/couplings, Tees,etc. as required (PE-63 & working Pressure 10 kgf/sq cm)

SITC Proposed HDPE 90 mm outside dia for 150 sq. mm. 3.5 core PVC cable

Supplying and erection of HT/LT over head line single length supports complete with aligning and keeping it in truly vertical position, including digging pit of required size in all type of soil/rocks filling with 1:3:6 cement concrete of 0.60 mtr. dia. around the pole up to ground level including muffing of 0.45 mtr. dia. from ground level to 0.45 mtr. high as per specifications with 20 cm. thick base foundation in 1:4:8 cement concrete as required refilling the pit with boulder and soil as required, including painting of pole with bitumen paint below GL and two coats of red oxide and two coats of aluminium paint or synthetic enamel paint above GL as directed complete as per specification. The depth of burying of pole shall be 1/6th of the length of pole. Supply of steel tubular pole swaged type as per IS:2713- 1980 Complete with base plate and top Canopy

SITC Proposed 410 SP-29 9 Mtr. Long Pole For street light (As-Per PWD SOR 2014)

LED Lamp 90 Watt

Providing & Making cable end termination with HEAT SHRINKABLE jointing kit complete with all accessories including lugs suitable for 33 kV/11 kV 3 core XLPE alum. conductor cable as required as per specification and as per accepted standard including connection testing complete. Heat shrinkable joint,kit 11 kV XLPE, 3 Core Heat shr.jointg. kit 11 kV XLPE cable O.D. termination

b. 3 x 50-95 sq.mm.

Suppying & installing G.I. Pipe for protection of underground cable fixed on wall/support/in trench/fixed between two rigid existing support of wall/beam for erection of ceiling Fan/down rod for stiff pendent for light luminaries /fan/protective for earthing, lightening conductor down strip/overhead service line/for submersible cable or centrifugal pump for water supply with necessary iron clamp coupler, bend, tee, elbow, nuts and bolts etc.complete in an approved manner as required to complete excluding cost of excavation/dismentalling & other finshed masonary Item complete.

For 'B' Class pipe ISI Marked (IS-1161-68) 150.00mm

A' Class G.I.Pipe ISI Marked (IS-1161-69) 150 mm

Supplying fixing testing and commissioning in propermannr street light timer switch with all required accessories complete with 110 Amps or req.amp switch.