MP Laghu Udyog Nigam Limited Tender

Providing and laying Eternity matt /Polished/ satin/marbletech finished Floor tile of sizes 800 x 800 mm with premium quality having water absorption less than 0.08% and conforming to IS: 10545-3of approved make in all colours and shades, Surface abrasion resistance our valve Polish-min. 1500 Revolution, M.tech-min. 1500 Revolution Rustic/ Matt-min. 8000 Revolution laid on 20mm thick base of cement mortar 1:4 (1cement : 4 sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. Kajaria/ Rak / Nitco

Acoustic Sound Proof Door :- Providing and fixing 85mm thick puff Acoustic Door consisting teak wood door frame section of size 100mm x 50mm and middle section size is 125mm x 50mm. 9mm thick commercial ply to be fixed on both size at teak wooden frame with 50mm thick resin bonded rockwool pad conforming to IS8193 of 100kg density to be fill in gap at wooden frame. For sound absorption 2mm thick sound damping layer (mass load vinyl) to be fix on inside 6mm calcium silicate board to be fixed inside the door to reduce sound transportation for acoustic insulation. 4mm thick teak veneer to be fixed as a skin on both sides finished. all edges of the panel door to be cover with 85mm wide x 10mm thick teak wood batterns - D type rubber gasket to be fixed teak wood battern for stop noise leakage complete door as performance as a top quality sound proof acoustic door. The door to be fixed on existing door frame with heavy duty SS hinger at size 150mm x 50mm x 4mm with ss screws. All hardware i.e. door handles, door stopper and door closer etc have to be taken separately, not to be included in this item.

Lock - Providing and fixing bright finished mortice latch and lock ISI marked with six lever and a pair of anodised(anodic coating not less than grade AC 10 as per IS:1868 aluminuium lever handles with necessary screws etc complete. Best make of approved quality.

Providing and fixing Satin stainless steel finish 400x16 mm sliding door bolts with nuts and screws etc. complete.

Providing and fixing Satin stainless steel finish 600 mm and 32mm dia Handle H Type with nuts and screws etc. complete.

Providing and fixing Dorma TS-68 door closure with standard arm EN2/3/4, necessary accessories and screws etc. complete.

Providing and Applying ultra tech texture paint required placed. compete as per direction of engineer-in-charge.

Providing and fixing Planters with plant and pabble - any size made up of FRP (Fiber Reinforce Plastic as per selected design detail.

Providing & fixing EURO pratik products of DECORIS series/CASA Series/3D wall art/ Designer wave board on 8mm thick ply (Century /Archidply/ Duro) on framework 50mmx50mm thick sal wood sections/second grade TW, placed at 600mm c/c in both the directions as per detail drawings. As directed by engineer in charge and architect.

Providing and fixing painting work made out of canvass by acrylic /oil paint colours as per design with framing work etc. complete in all respect as per direction given by Engineer in charge.

Providing and fixing steel dustbin with cover and rubber base for water protection perforated design as per direction of Engineer in charge.

Providing & fixing of plane washable wall paper high resolution including all fittings with wastage.(Spin Décor / marshell / Green)

ROLLER BLINDS:- Providing and fixing of roller blinds of washable fabric duly fixed with powder coated channel and clamps having nylon code for operation of approved color etc. complete in all respect as per direction given by Engineer in charge. (Vista / NBT /MAC/ WINDOW TECH )

Providing and fixing of file storage cabinet 450mm wide file storage cabinet made up of 18mm BWP ply ,ply finished with 1.00mm thk laminated all drawer to be mounted on telescope channels of (Hettich/ebco )approved make .All exposed edges to be finished with Ist quality beading.All inside surface to be finished with 1.00 mm thk laminated. The cost is inclusive of all material,accessory,SS handle lock labour ect complete . All plywood Make only DURO Laminate/CENTURY Laminate/ARCHID Laminate/ GREEN Laminate Make : Godrej / Wipro / BTF / CSPL

Providing and fixing Working Table, All base members are made of 12mm thk. MR Plywood with 3mm thk. Vineer or 1.5mm thk approved quality laminate. Including all required accessories ansd all work as per drawing or as per directed by Engg. In-charge. Make : Godrej / Wipro / BTF / CSPL

Providing and fixing computer table, all sides made of 12mm thk. MR Plywood, including required 3mm thk. Vineer or 1.5mm thk. Approved quality Laminate any shade. Required drawer as per drawing. Including required accessories drawer lock, handle, Key Board try, Footrest, Cable manager, leg shoes etc. Sizes of table are 600mm wide x1000mm long and 700mm Height., Drawer size 600mm x 600mm height as per table. Inside drawer 1.0mm thk. laminate in white colour aswell as paint with putty. Make : Godrej / Wipro / BTF / CSPL

Reception counter :- Providing and fixing in proper position curved/Rectagular/angular shape reception table/counter of Size 1500mmx800mmx750mm.The basic stuture to be made of 18mm BWP ply with drawer.and top and front surface finish with corain ,shelves and shutter made in 12/18// asmarked in detail,drawer to be mounted on telescopic channels,provision for keybpard cable manager auto hinges handle and drawer lock.The ecposed members to be finished 1.00mm thk laminate,and inner or unexposed surface to be finished 0.80mm thk laminate;One exposed side to be in 12mm thk frosted glass mounted on brushfinished SS studs or as per instruction.All work complete as per instruction of Architect/Eng in charge. ( all plywood used only Make DURO/ CENTURY /ARCHID / GREEN PLY Make). Make : Godrej / Wipro / BTF / CSPL

Reception chair:- providing and fixing of reception chair pch 9u02r, the seat and back are made up of 1.2 +-0.1cm. Thick hot pressed plywood measured as per qa method described in ocp olta-p14-18 and upholstered with fabric and moulded Pu foam together with moulded seat and back covers.B The back is designed with contoured lumber support for Extra comfort. The seat has extra thick foam on front Edge to give confort to popliteal area. The mid back size Is 47.5 cm w x 58cm h and the seat size is 47 cm w x 48 Cm d. Make : Godrej / Wipro / BTF / CSPL

Supply, Installation, Testing and commissioning of CE Certified 125W LED Par light, RGBW, Manual & DMX Control, fully RDM compliant when in DMX mode, 18° Beam Angle, Light Output @ 2 Meter 10000 Lux @ 18°, complete with 3 Meter cable, Die cast Aluminium body black color as per the details provided in the Technical Specifications sheet. Make: Leksa/Martin/Canara

SITC of 200 W LED FRESNEL LIGHT Features: 200Wcool white LED, Life: More than 30000 hrs, Field Angle: Spot Light (1/10 peak), 29- degrees; Soft Light (1/10 peak), 97-degrees, Manual zoom, Color Temperature: 5000K, Color Rendering Index: Ra=84, Dimmer: 0-100% linearly adjustable, Channel: 1 channel for dimmer, Housing: Highintensity die-casting aluminum, IP20 Make: Leksa/Martin/Canara

Supply, Installation, Testing and commissioning of CE Certified 195W LED Profile Spot light, 3200K, CRI, TLCI 95, Manual & DMX Control, fully RDM compliant when in DMX mode, 19°/26°/36°/50°, Spot Beam Angle, Light Output @ 2 Meter 18,000 Lux @ 16°, complete with 1 Gel Filter Frame & 3 Meter cable, Hi grade plastic body black color as per the details provided in the Technical Specifications sheet. Make: Leksa/Martin/Canara

Supply, Installation, Testing and commissioning of CE Certified 140W LED Cyclorama wash light, RGBW, Manual & DMX Control, fully RDM compliant when in DMX mode, 96° Beam Angle, Light Output ≥ 1300 Lux @ 96°, complete with 3 Meter cable, laser cut finish MS sheet black color as per the details provided in the Technical Specifications sheet. Make: Leksa/Martin/Canara

Supply, Installation, Testing and Commissioning of Die cast Aluminium C Clamp with safety chain duly epoxy polyester powder coated in black matt texture finish as per the details provided in the Technical Specifications sheet. Make: Leksa/Martin/Canara

Supply, Installation, Testing and commissioning of 512 ch single universe lighting controller with builtin ARTNET & Wifi, 20 multifunction fixture faders with 9.7" touch screen, technical specification provided in the data sheet. Make: Leksa/Martin/Canara

Supply, Installation, Testing and commissioning of DMX Splitter with 1 DMX in and optically isolated 8 DMX out port for DMX network as per the technical specification provided in the data sheet. Make: Leksa/Martin/Canara

Supplying, installation, testing & commissioning of 6 Ch. X 2kW per channel Dimmer, Make: Leksa/Martin/Canara

Supply, Installation, Testing and commissioning of FR DMX Signal Cable with CE/ISI mark as per the technical specification provided in the data sheet.

Supply, Installation, Testing and commissioning of FRLS 3 Core 2.5 SQMM Cable with ISI mark as per the technical specification provided in the data sheet. Note:- The Bidder Shall quote his own rates for item rates 1 to 31