MP Laghu Udyog Nigam Limited Tender

Executive Table Type-1 all tops shall be made of both side veneer faced MDF board 25mm thick and sides. Drawer, shelves etc of 18mm thick both side veneer faced particle board. Top shall have 90mm thickness all over the border with suitable reinforcement at bottom and teak wood beading. Executive table Type-I Size 3600 x 1080 x 750mm Make : Godrej / Wipro / BTF / CSPL

Providing and fixing in position Auditorium High Back chairs of inner side size width (W1)490X480X1020 with push back mechanism having seat assembly made of polyuret lane oam mou ded with M.S. tubular frame insert which is upholstered with fabric. The structural should be as per technical specification as mentioned below :- Back :- Back of chair shall be 470mmX730mmX130mm upholstered constructed with 19mm thick ply having proper curvature for lumber support with PIT. moulded foam having density 40±51:g/cum, upholstered chair back to have plastic back shall duly embossed, bend and Formed by ABS. The back of chair should have provision of seat number and same will be provided by the chair supplier. Seat Chair seat size to be 480X490 with thickness of minimum 130mm with 19mm plywood this should be covered with minimum 120mm in P.U. foam, fully upholstered with P.U. moulded foam having density 45±5kg/cum. Side panels :- All side panel to be of 12mm thick plywood covered with fabric and fused with 25mm thick loam, side panel to cover all exposed metal part. The end panel of row should have provision of row number indicator with LED light. Arm rest:- 2nd class teak wood melamine Polished arm rest of size 425X.65X40mm of approved design will be fixed above side panels. Fabric :- The Fabric shall be inherent Fire Resistant Fabric, 100% Polyester Stretchable Circular knit. Fabric, of approved make , shade and design of minimum 400 GSM, quilted with foam bonded fabric of 5.0mm thick. (The shade and quality is to be finalized by Engineer-in-charge as well as by the client department.) Make : Godrej / Wipro / BTF / CSPL

EXECUTIVE CHAIR Premium chair high back type-1 overall dimensions:- W640mm x d700mm x h1180 to1300mm, seat size 500mm x 500mm (minor side), back size 500mmx 750mm (outer side). Seat and back shall be made of 12mm ± 1mm thick hot pressed ply. Seat fitted with 50mm foam density with topping of 35mm foam and soft foam making double layer. the back shall be designed with contoured lumber support of extra comfort. Back of the chain shall be covered with the leather and soft foam. Handel of the chain shall having width 70mm approx. in one piece. The chan shall be front type syncro tilt mechanism with 360 degree revolving. the pedestal shall be injection moulded in black 30% glass filled nylon with gas lift mechanism width 700m, steel inseted with twin castor wheels. Seat and back shall be covered with superior quality leather. Make : Godrej / Wipro / BTF / CSPL