MP Laghu Udyog Nigam Limited Tender

Providing and fixing of Visitor Chair - Overall dimensions W615 x D682 x H896 mm ,seat height 466 mm , Seat and back shall be made of 12 mm + 1 mm thick hot pressed plywood and upholstered with moulded PU foam of 50 mm thick and 40 density with approved quallity fabric,Tubular frame cantilever type made of 2.55+ 0.04 cm + 0.2 + 0.015 cm thick MS ERW tube. , The arm rest shall be adjustable with cushion on the arm rest top. Design of above as per directions of Engineer-in-charge.

Providing and fixing of Conference room chairs - Overall dimensions W615 xD684 x H896 mm ,seat height 466 mm , Seat and back shall be made of 12 mm + 1 mm thick hot pressed plywood and upholstered with moulded PU foam of 50 mm thick and 40 density with approved quallity fabric , Tubular frame cantilever type made of 2.55+ 0.04 cm + 0.2 + 0.015 cm thick MS ERW tube,The arm rest shall be adjustable with cushion on the arm rest top. Design of above as per directions of Engineer-in-charge.

Providing and fixing of Table Size : W2704 x D1054 x H754 mm , The table shall be made of 25 mm MDF board with 0.6 mm thick laminate post formed with edge effect of 36 mm . The angular section shall be membrane coated or PU painted. , The main table shall have under structure having verticals made of 25 mm thick particle board post formed legs with modesty made of 25 mm thick, particle board having decorative laminate on both sides,The table shall have a drawer unit of size 462 x 577 x 552 mm having two drawers and one filling . The drawer unit shall be made of 18 mm thick pre-laminated particle board with post formed facia , Side Unit- The overall size of side unit shall be 182 x 552 x 752 mm Top made of 25 mm thick MDF Board with 0.6 mm laminate post formed on it. The under structure shall be made of 25 mm thick particle board having decorative laminate on both sides. The unit shall have openable shutter storage and 3 drawers units with facia duly post formed. Table top and side unit shall have glass top of 12 mm thickness duly beveled. Levellers to be provided at bottom. Design of above as per directions of Engineer-in-charge.

Providing and fixing of Table Overall Size : Table 1790 x 905 x 762 mm Side runner - 902 x 402 x 762 mm Back runner - 1167 x 402 x 762 mm corner unit - 632 x 632 x 758 mm ,Table and side runner made of PLPB board and post formed particle board as per design requirement. All tops 25 mm thick and sides 18 mm thick. Design of above as per directions of Engineer-in-charge.

Providing and fixing of Conference Table , The Conference table shall be made of 25 mm MDF board and 0.6 mm thick laminate duly post formed 18 and 25 MM thick pre - laminate particle board or post formed particle board. , The top shall be made of 25 mm MDF board and 0.6 mm thick laminate duly post formed edge effect of 36 mm,The vertical legs shall be made of 25 mm thick particle board and 0.6 mm thick laminate duly post formed, Apron shall be made of 18 mm thick BSL particle board of 500 mm width. , 12 mm thick frosted glass shall be provided at centre or duct for arrangement of mic and cable with PU painted top cover, The Top of half round unit/ quarter unit / oval end shall be membrance coated or polyurethane painted. Design of above as per directions of Engineer-in-charge. Oval end unit - 1202x302x752xmm

Providing and fixing of Conference Table , The Conference table shall be made of 25 mm MDF board and 0.6 mm thick laminate duly post formed 18 and 25 MM thick pre - laminate particle board or post formed particle board. , The top shall be made of 25 mm MDF board and 0.6 mm thick laminate duly post formed edge effect of 36 mm,The vertical legs shall be made of 25 mm thick particle board and 0.6 mm thick laminate duly post formed, Apron shall be made of 18 mm thick BSL particle board of 500 mm width. , 12 mm thick frosted glass shall be provided at centre or duct for arrangement of mic and cable with PU painted top cover, The Top of half round unit/ quarter unit / oval end shall be membrance coated or polyurethane painted. Design of above as per directions of Engineer-in-charge.Two seater main unit - 1352x602x752 mm

Providing and fixing of Centre/ Side Table Overall size 1200x602x452 mm , Legs shall made out of 76x 76 mm teakwood section, Top rail shall be made of 70x22 mm , Top shall be made of 18 mm veneer faced MDF board , Teak wood beading of 18 mm shall be fitted as per approval. , Polish- PU polish shall be done. , Design of above as per directions of Engineer-in-charge.

Providing and fixing of Sofa chairs Three seat sofa Overll size : i) Single seater- W1000 mm x D882 mm xH-782 mm. ii) Two seater - W 1376 mm x D882 mm xH-782 mm. iii) Three seater - W 2062 mm x D882 mm xH-782 mm. , Frame material - Tropical seasoned hard wood, particle ply board, seat shall be made of 100 mm thick 40 density PU foam with topping of super soft foam. , Back foam shall be made of 60 mm thick 40 density PU foam with topping of super soft foam, Fabric of approved quality / colur shall be used for upholstery work. , Belt Matreial : Nylon , 2" , 3", Boanding solution : Boltic Glue , Stitching of Nylon, Polyester - coats. Design of above as per directions of Engineer-in-charge.

Providing and fixing of Steel Storage Cabinet , Overll Dimensoins : H 1980 x W916 x D486 mm , Material : Prime quality MS CRCA sheets 1.1 mm for front , side and shelves and 0.9 mm for back approx, Number of shelves : Four forming five compartments. Suiltable arrangement shall be procided for adjusting the shelves as per requirement, Locking Mechanism : Three way bolting device with six levers superior quality standard made of lock with duplicate keys., pedestal: Made of 1 mm MS CRCA sheet. Height 125 mm , Hinges : Double folded type hinges made of MS CRCA sheet thickness 1.8 mm to 2.0 mm. Three hinges for each doro elaf. , Finish : Almirah shall be powder coated after seven tanks anti corrosion pretreatment, All the accessories shall be superior qualty and standard make . Design of above as per directions of Engineer-in-charge.

Providing and fixing of Staff Table Overall dimensions :- W898 x D602 x H762 mm, Frame structure : made of prime CRCA tube verticals made of prime CRCA pressed section of 150 mm as per approved profile , Horizontal sides shall be made of 52 x 26 x1.2 mm prime CRCA tube and vertical connecting rod of 25x25x1.2 mm, One horizontal support of pressed section of width 200 mm shall be provided also fulfilling purpose of foot rest , "Star" dotted embossed steel modesty panel at front side shall be provided through out width wise 200 mm wide, Top shall be made of 18 mm thick prelaminated particle board. , A Single drawer of size W-300xD-400xH-105 mm of 0.8 mm prime CRCA sheet shall be provided drawer slides on telescopic channe. ,Drum type leveler shall be provided at bottom. Design of above as per directions of Engineer-in-charge.