MP Laghu Udyog Nigam Limited Tender

EXCUTIVE Table with Runner :- Table size : (1500 mm x 1000mm x 750mm) & Runner Size:- (1200 x 450 x 650) Providing and fixing in position table as per design by using 25mm thk plywood for top and 18 mm thk plywood for all other horizontal and vertical memers telescopic cpu stand/modular keyboard tray shall be provided of approved model and make .All exposed plywood surface to be finished with 1mm thk laminate & unexposed surface to be finished in matching coat of french polish in required coates,including cost of all hardware ect work complete as per instruction Architect/Eng in charge. Greenguard/bifma certified co.

EXECUTIVE CHAIR(high back) Supplying and installing of godrej /herman miller/haworth or equivalent make chair high back chair model mint-1 ergonomically designed for ontoured lumber support for extra comfort having seat made up of insert moulded polyurethane foam of density 75 +/- 4 kg/m3 upholstred with foam laminated mesh fabric assembled over plastic seat cover the back made up of two pieces injection moulded frame with the inner frame upholstered with mesh fabric and mounted on the main assembly ,the armrest top made up of injection moulded polyurethane and mounted on the injection moulded height adjustable type armest with height adjustable up to 45+-5mm synchonised pivot mechanism of 360 degree revolving type and having tilt with 3 position locking anti shock feature peeumatic height adjustment of 90 mm neck rest assembly mounted on top of back made up of polyurethane foam uphoistred with foam laminated mesh fabric and having vertical adjustment up to 45mm &angular adjustment of 30 degrees ,the pedestal made up of die cast aluminium fillted with 5 no twuin wheel castors which ar injection moulded in back pp all complete as per manufacture specification and direction of eng in charge.

Providing and fixing of godrej /herman miller/haworth or equivalent make chair pch 9u01r, , the seat and back are made up of 1.2+0.1cm. Thick hot pressed plywood measured as per qa method described in ocpqlta-p14-18 and upholstered with fabric and molded pu form together with molded seat and back covers-b. The back is designed with contoured lumber support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area, the high back size is 47cm w x 60 cm h and seat size is 47 cm w x 48cm d.The hr pu foam is molded with density 45 +-2kg/m cube and hardness load 16+2kgf as per is":7888 of 25% compression. The one piece armrest are injection molded from black co-polymer pp .Centre tilt syncro mechanism has 360 degree revolving type, upright position locking tilt tension adjustment, seat/ back ratio of 1:3. The pneumetic height adjusment has an adjustment stroke of 12 +- 0.3 cm. Telescopic bellow assy: it is 3 pc telescopic type and injection moulded in black pp. The pedestal is injection moulded in black 33% glass filled nylon 66 and fitted with nos. Twin wheel casters. The pedestal is 66.3 +- 0.5 cm. Pitch dia (76.3 +- cm with castors).

Providing and fixing of file storage cabinet 450mm wide godrej/herman miller/Haworth or equivalent file storage cabinet made up of 18mm BWP ply ,ply finished with 1.00mm thk laminated all drawer to be mounted on telescope channels of (Hettich/ebco or equivalent)approved make .All exposed edges to be finished with Ist quality beading.All inside surface to be finished with 1.00 mm thk laminated.The cost is inclusive of all material,accessory,SS handle lock labour ect complete .All plywood onlycentury,greenply,duro,archid,standard

Door Panelling :- Providing & fixing for paneling on walls /column /beam etc by using dimensionally stable and wrap free ISI marked plywood/bloc board/mdf sheet work shall be fixed to base in straight line and proper plumb using screw ued in wall should properly fixed with M seal compound and rawl plug/The job shall be included all material labour wastage etc complete plywood marine grade IS 710 01) BWP Grade IS 5509 a) 18 mm thk plywood

Providing & fixing in position Assistance table (size 1200 mm x 900 mm x 750 mm ) as per design including side storage by using 25mm thick plywood for top and 18mm thick plywood for all other horizontal and vertical members. Telescopic cpu stand/modular keyboard tray shall be provided of approved model and make. All exposed plywood surfaces to be finished with 1 mm thick laminate as per , ( all plywood used only , century, greenlam, acero, gold wood or equivalent make ).Greenguard/bifma certified co.

Providing and placing of MID back revolving chair for Library Chair type bio synchronic with fixed arm,ergonomic seat design,backrest made up two piece injection moulded frame backrest symmetrical lumber support with material of aluminium die cast with ABS/nylon pu foam covered with mesh fabric 220 gram GSM thickness of fabric 5% (gram/sam) with a warranty period of 1 year product must be approved before supply.Greenguard/Bifma Certified Co.

Providing and placing in position library reading table for maximum 21 seat( as per required) with rounded corners as per detail,Reading table top made with 25mm thik BWP plywood finished with 1.00mm thk laminated,laminated used two colour,out sides edge of the working top shall be provided with 1/1/4 x1 inches teak wood moulding beading finished with melamine polish,,inside edge will be provided with ½ inches teak wood beading patti with melamine polish(beading work used as per required) vertical facies of reading table with 18mm thk BWP plywood finished with 1mm thk laminated/with 1.00mm thk groves at the joints of laminated of two different,shades horizontal branches ofreading table fixed between vertical faces and horizontal designer patta fixed on exposed facies horizontal branches and patta made with 18mm BWP ply wood finished 1.00mm thk laminated outside edge of horizontal branches and patta shall be providing teak wood beading,finised with melamine polish all the plywood frame shall be treated with 5.0% diluit anti termite emuision sparayed and shall have provision for cabling and file manager as per deawings work complete all labour and material.Greenguard/Bifma Certified Co.

Providing and fixing at newspaper reading desk of size 4’x3’x4’6”(lxbxh) with space below for keeping of vouchers shall be made of 19mm ISI marked ply and finished with 1.00 mm thk approved shade laminated finish exposed surface.The table shall be made up to 12.0mm thk coloured glass fixed top with SS buttons as per given design & drawing The table top& vertical diovisions for keeping with drawal forms.The panel shall have 4mm thk at 2;0” l&skirting shall be finished with 3” wide 1.00mm thick brushed strembeech of euro make the cost shall included all material fixing at site ect complete.Greenguard/Bifma Certified Co.

Wall wooden cladding: Providing &fixing in position phenol bonded bamboowood wall cladding at all height with planks of sizes 10mm thick ,1800 mm length(minimum) and 130mm wide (minimum) in approved colour texture and finish,having performance appraisal certificate with necessary profiled edges fixed with 40mm ss screws 5 no in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height 40x15 mm placed at ends of each tile.The cladding shall be laid over backlayment of 1.00mm thick expanded poly ethylene foam of density 40 kg/cum in two layers first layer on wall surface before fixing wooden frame and second layer on frame under cladding.The bomboo wood planks shall have minimum density of 1000 kg/cum& minimum hardness 1000 kgf with Eco etc.

Librarin counter :- Providing and fixing in proper position curved/Rectagular/angular shape reception table/counter of Size 1500mmx800mmx750mm.The basic stuture to be made of 18mm BWP ply with drawer.and top and front surface finish with corain ,shelves and shutter made in 12/18// asmarked in detail,drawer to be mounted on telescopic channels,provision for keybpard cable manager auto hinges handle and drawer lock.The ecposed members to be finished 1.00mm thk laminate,and inner or unexposed surface to be finished 0.80mm thk laminate;One exposed side to be in 12mm thk frosted glass mounted on brushfinished SS studs or as per instruction.All work complete as per instruction of Architect/Eng in charge (greenguard/bifma certified co.

Providing and applying Texture paint of super fine quality,it shall be applied after preparing the surface to the satisfaction of the Eng-in charge to get the proper finish.The paint shall be applied using texture finish and pattern suggested if any with two coats of plastic emulsion paint as speccified by the consultant &Eng in charge .The rates are inclusive of all item including leads & lift necessary to complete the item in good condtion nothing shall be paid extra separately unless specified

Providing and fixing of approved quality wallpaper with approved graphics and folder (as per architect) and pasted on the panels &patition on surface prepared with putty with required adhesive on the surface (the rate does not include sueface preparation) basic rate of wall paper is RS 2000 to 2200 per sqm.The item in good condition nothing shall be paid extra separately unless specified

Providing and fixing of single seater sofa 600mm x 650mm x 450mm in length with primary /secondary frame structure made with 19mm BWP plywood and 70mm elastic belt and 10mm foam around the frame and leg of made made with first class best quality seasoned teak wood as per directed by architech.sofa should have cushion with 36D foam+20mm thick 28d foam 25mm butter foam and covered with white finish cloth and than with premium quality fabric Greenguard/bifma certified co.

Supplying and installation of 65" interactive pannel infared technology ,i5/4GBRAM/26 SDD hard disk with video conferencing through UHD camera,Interactive witheboard ,MS office Professional and window 10 professional with 3600D Hd Zoom camera inbuilt (Make-Aero/ViewSonic/LG/ATVI) Bidder Should have OEM authorization along with Technical Bid of Approved Make

Supplying and fixing of wooden sofa side table of (400mm L X400mm wx400mm H) Table top made with 19mm BWP plywood and finish with 4mm veneer or 1.00 thk laminated finished and legs (if Reqd.) and frame of table made with first class best quality seasoned teal wood as per detail. All work shall be carried out as per detail drawing and instruction of Architect/eng –in charge ( Make- Greenguard/BIFMA certified co)

Providing and placing Notice Board (6x3) of having the following specification:-Size of board shall not be less than 6”wx3”H Surface material shall be woolen felt fabric. Core material shall be min 9mm thick soft board. Best quality rubber spray bale adhesive shall be used Backing material shall be 0.62 mm to 0.82 mm thick laminates sheet with extra melamine surface mix colour OR 0.16 to 0.25 mm thick ISI mark GP sheet. Aluminum frame shall be anodized (5 microns thick. Extruded aluminum section designation 63400 as per IS: 1285-2002-16 mm thick) chrome plated wall mounting bracket at all four corners fitted with aluminum revert. The Agency product shall be BIFMA compliant as per approved sample of Notice Board by Eng. in charge in consultation with client department before providing it at site.

Wooden Solid full height Partition:-Providing and fixing of full height partially glazed partition 75mm thk till roof height made on frame work of 18mm BWP PLY GRID SIZE 500MMX500mm horizontally and vertically with 12mm thk ISI grade premium quality BWR plywood on both sides, plywood should be finished with 4mm thk veneer/1.0 mm thk laminate as per Drawing. The framework shall be secured to the flooring and celling. The glass to be fixed with the help of wooden beading finished with synthetic enamel paint satin finish as per detail DWG, The rate shall include ant termite treatment all hardware fitting, adhesive beading (12mmx75mm) etc., to The rates are inclusive of all item including lead &lift and necessary to complete, the item in good condition noting shall be paid extra separately unless specified. (Plywood century,greenply,duro,archid or equivalent make)

Providing, fabricating and fixing 12 mm thk clear toughened glass with edge polished and prepared for patch fitting with required designs approved by eng in charge in frosting& ehching dimension as shown in drg,for entrance door and fixed glazing. The entrance glass door shall be fitted with over panel patch top patch and bottom rail with locking system.the fixed glazing shall be supported by connecting profiles ect all the patch panels connectors and other accessories should be SS brush finish.All handles floors spring shall be of Dorma or equivalent .All joint shall be sealed with silicon based seal and made water tight ect .COMPLETE AS PER DRAWING AND INSTRUCTION

Providing and placing 4 Door important document case of make Godrej/Herman Miller /Haworth having the following specification: it shall have the configuration of 914 mm (W) X320 mm (D) 1742 mm (H) it shall have unique design providing the right rigidity to top hinged doors to facilitate easy use. The shall have a right knock Down construction. The top panel, back panel and side panel shall be made of 0.7mm high yield CRCA and other components from 0.8mm CRCA Each door shall have a 6 lever cam lock with common key.3mm thick glass shall be used in each door to clear inside vision which shall be secured in a metal frame through a rubber gasket. Scissor Mechanism shall be provided in each door for receding inside the top of every compartment and it shall ensure parallel and smooth movement. Each Door shall be provided with plastic side end caps as handle which is easy to grip. Each compartment shall have a storage shelf with a UDI .Capacity of max80kg.The 2 Door case shall have 18mm PLB top straight edge with PVC lipping. The finishing shall incide Epoxy power coated to the thickness of 50 microns .The agency product shall be BIFMA Compliant as per Approved sample of 4 Door document case by Eng.-in –charge in consultation with client department before providing it at site.

Providing fabrication installation of wooden false celling in perfect line and level having base frame made up to 18 mm Plywood laminated with 1 mm thk MICA, Providing grooves as per drawing,making required opening for fixing of the light fiture and finishing the veneer surface with base frame suspended with MS angle of sz 25x25x3mm fixed to soffit with help cleat anchored with rawl plugs of required size including necessary SS Screws adhesive ect required for fixing pasting all complete and direction of eng in charge

Providing and fixing decorative laminate 1.0-1.5mm thick (rate Rs 3800-3500 per sheet) as per marine grade PVC Glue (fevicol) applied @.45kg per sqm to partition ,panelling roof beam or similar places as architectural drawings as approved by consultant/engg in charge & design and having pin groove (Make Delta/Greenlam/Royal Touche)

Supplying & Installation of touch screen kiosk 21.5inch Specifications Type /Mounting :free standing ,floor mounted with base and screw less chasis with wheels Construction:1.6mm thick Display Type :21inch Color Led Touch Monitor Resolution :1280x1024 Brightness 250NTS Touch Screen: Resistive touch Dual Core,4GB ram,500Gb hard disk Speaker:inbuilt for 5 watt Cooling Fan:provided as per required Weight:45kg approx Overall Dimension 419x650x1400mm Product Warranty :1year Make : REGAL/ADVANCETECH/ELPRO,Bidder Should Have OEM Authorization along with technical bid approved

Grouting joints of tiles flooring with epoxy grouting etc. complete including all labour and material. The Bidder Shall quote his own rates for Item rates as BOQ1 item no. 1 to 27