MP Laghu Udyog Nigam Limited Tender

Table 4' x 2' made of 18 mm ply, finish with 1 mm laminate 0.8 mm thick laminate inside all side teak wood beeding size of 22mm x 6mm and foot rest with providing storage cabinate below table top of size 400mm x 700mm & 450mm deep having 1 nos 100mm deep drawers with lock & shutter made in 19 mm ply, finish with 1 mm laminate 0.8 mm thick laminate inside all side teak wood beeding size of 22mm x 6mm, make provisions for networking & cable to run inside work stations.Inner areas abobe table top to befinished.The rate shall include all necessary hardware like 3'' ss hinges, catchers, handles,drawer channels, locks etc. Inner surfaces to be finished with 0.8 mm thick laminate complete finish .

Instruction-Table made of 18 mm ply, finish with 1 mm laminate 0.8 mm thick laminate inside all side teak wood beeding size of 22mm x 6mm and, make provisions for computer monitor and cpu stand with networking & cable to run inside work stations.Inner areas avobe table top to be finished.The rate shall include all necessary hardware like keyboard etc. Inner surfaces to be finished with 0.8 mm thick laminate complete finish .

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up staqndard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold . Fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free straight, mitred and jointed mechanically wherever Aluminium Work required icluding cleat angle, Aluminium snap beading for glazing /paneling C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing and paneling to be paid for separately. Provinding & Fixing Aluminium 2 Track Windows with 4 mm thick glass Complete Hardware

Provinding & Fixing Aluminium Partition with laminated board & 4 mm thick glass Complete Hardware

Chair seat and back made of 10mm compressed molded ply with P.U. cushion on seat back with soft P.V. Handle base duly powder coated plated using upholstery of approved color with lift mechanism for revolving chair. a) High back with revolving

b) Medium back with revolving

c) Low back with revolving

d) Low back without revolving & lifting

RACK- Providing and fixing of Rack structure made MS Angle 40x40x5mm, center support of MS Flate and shelf 19 mm comm plywood, teakwood beading all side and finished with 1 mm laminate. Complete hardware.

Filling storage 1'6" deep & upto ceiling height, made of 19mm comm b/b finished with laminate externally & Internally the storage shall have intermediate shelf finished with hand polish as per design & detail.

Over Head Filling storage 1'6" deep & upto ceiling height, made of 19mm comm b/b finished with laminate externally & Internally the storage shall have intermediate shelf finished with hand polish as per design & detail.

Colour Acid Glass work- providing and fixing of colour acid glass work complete finish. as per specifications drawings design and as directed by Engineer-in-charge.

White Acid Glass work- providing and fixing of white acid glass work complete finish. as per specifications drawings design and as directed by Engineer-in-charge.

Crystal glass work- Providing and fixing crystal glass work complete finish .as per specifications drawings design and as directed by Engineer-in-charge.

Fully covered - Sofa with Arms - Providing and fixing of Sofa structure made of 18 mm thick plywood, spring, niwad, foam cushion upholstery fabric I.S. shoe etc complete hardware as per specifications drawings design and as directed by Engineer-in-charge. a) Fully covered - Sofa with Arms

b) Fully covered - Sofa without Arms

Providing & Fixing of 75 mm thick low ht. partation, structure of MS Pipe 19 gauge, Maximum grade 600 mm x 600 mm both sides 8.00 mm thick commercial ply 1.00 mm thick laminate, 8.0mm thick toughened glass, rubber wood beading with polishing and complete hardware including cutting of light arrangement complete Finish.

Providing & Fixing of 75 mm thick full ht. half glazed partation, structure of MS Pipe 19 gauge, Maximum grade 600 mm x 600 mm both sides 8.00 mm thick commercial ply 1.00 mm thick laminate, 8.0mm thick toughened glass, rubber wood beading with polishing and complete hardware including cutting of light arrangement complete Finish.

Providing & Fixing Conference Table Table 8' x 2' made of 18 mm ply, finish with 1 mm laminate 0.8 mm thick laminate inside all side teak wood beeding size of 22mm x 6mm and complete hardware.

Providing and fixing of SS Bench with ss finish coating. With perforted sheet. Complete hardware.

Providing & applying superior grade plastic emulsion paint to internal wall surface to give an even shade in roller finish . Including thoroughly brushing the surface free from foreign matters, sand- papering smooth, filling in all holes & crapes applying acrylic putty & rubbing down the surface on coats of cement primer rate to include for all tool, labour scaffolding as reqd. complete as directed

Roller Blinds : Providing and fixing of vertical dust proof roller Blinds of approved shade texture and fabric ( opaque / eclipse )with aluminium gear androlling arrangement , duly powder coated with all necessary mechanism complete in all respects and properly finished to the satisfaction of engineer in charge.

Note:- The contractor shall quote his own rates. For NON SOR ITEMS for which no tender percentage above / below shall be applicable.