MP Laghu Udyog Nigam Limited Tender

TPN DB with Phase segregation as follows (For Raw Power to AC indoor unit) Flexi/Row DB 4Row 56Module. Incomer 63 A 4P MCB - 1 No. Sub-incomer 63A, 300mA 2Pole ELCB - 3 Nos. Outgoing 10 A/16A/20/25 A SP MCBs - 18 Nos.

Point wiring (including switches,sockes etc) with 1.5 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI Marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit etc. as required as per specification for :-2 Switch and 3 Socket. Cost of conduit is extra.

Workstation : -Providing and Installation computer workstation table with overall size L 660mm x W600mm x H 900mm. Overall height that is to be assembled at site. The work top shall have the size 600mm x 540mm x 750mm made up of 25 mm thick Pre-laminated board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celcius. The top trim, top bar, mid bar, vertical bar, raceway, skirting shall be made up of aluminum extrusions (pre-treated) and duly powder coated with 40µ - 60µ thick. The exposed vertical and horizontal faces of the frames shall be snap fitted with trims. Laminated top tile and bottom tile shall be situated at both sides of the user and below the work top respectively. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be situated at bottom. Adjustable leveler shoe shall be provided at bottom of the partition to avoid scratches on the floor. The end wall of the table shall be topped by gable end. It should be mae up of 25 mm thick Pre-laminated Particle Board. The board used should meet International Standards of quality, meeting long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS. The Design should be prepared in 3D with colour scheme and the manufacturing shall not start until the design is approved. Make: CSPL/ Wipro/ featherlite/ Bontone

Revolving Chair:- Supplying and Installation of medium back chair with egronomic design, comfortable & aesthetically appealing. The seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 45kg/m3 (or better) in seat and 45mm thick having density 35kg/m3 (or better) in back. The same shall be upholstered with fabric tapestry 1 mm thick and 300 GSM. The back and base shall of chair shall be supplied with polypropylene/ABS moulded cover and the backrest shall be made by keeping the natural curvature of the spine with back support. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and armrest shall be used black integral polyurethane arm with metal insert completely joint with seat and back for better support and durability. The armrest should be flat. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100 mm with standard class-3 gas-lift to suit them using the lever inder the seat. The gas-lift mechanism should be tested as per standards. The pedestal should have five legged injection moulded in black 30% glass filled nylon having pitch circle dia. 700 mm and fitted with 5 nos twin wheel castors. The castors of the chairs should be injection moulded in black 30% glass filled nylon, tested to perform 98,000 cycles with 250 lbs load. The seat size shall be 485+/- 10mm (W) x 450+/- 10mm (D) and back size shall be 480 +/- 10mm (W) x 400 +/- 10mm (H) from seat. Overall height shall be 810 +/- 10mm. Make: CSPL/Wipro/Featherlite/Bontone

Executive Chair:-Supplying and Installation of High back chair with egronomic design, comfortable & aesthetically appealing. The seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 45kg/m3 (or better) in seat and 45mm thick having density 35kg/m3 (or better) in back. The same shall be upholstered with fabric tapestry 1 mm thick and 300 GSM. The back and base shall of chair shall be supplied with polypropylene/ABS moulded cover and the backrest shall be made by keeping the natural curvature of the spine with back support. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and armrest shall be used black integral polyurethane arm with metal insert completely joint with seat and back for better support and durability. The armrest should be flat. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100 mm with standard class-3 gas-lift to suit them using the lever inder the seat. The gas-lift mechanism should be tested as per standards. The pedestal should have five legged injection moulded in black 30% glass filled nylon having pitch circle dia. 700 mm and fitted with 5 nos twin wheel castors. The castors of the chairs should be injection moulded in black 30% glass filled nylon, tested to perform 98,000 cycles with 250 lbs load. The seat size shall be 485+/- 10mm (W) x 450+/- 10mm (D) and back size shall be 480 +/- 10mm (W) x 400 +/- 10mm (H) from seat. Overall height shall be 810 +/- 10mm. Make: CSPL/Wipro/Featherlite/Bontone

AUDIO PODIUM WITH DIGITAL TEACHING DEVICE:- This serves as the main component, for various computing spplication, audiomanagement with controlled input & output touch interactive oprations, camera for image/video input to streaming platform. 22" Top Display with captive Touch, Built in PC, 23" Goose Neck Microphone, Wireless Lapel Microphone, Cordless handheld Microphone, 120FOV, FHD webcam, Digital Audio Codec, Control Panel (On/off, Volume up/Dn & More) External HDMI, VGA & USB. Make: ATDC/ ALTOP/ Oninfinity/Btio/Pentagon/View Sonic.

Lap Top :- 11th Generation Intel® Core™ i5-11320H Processor, Windows 11 Home, Intel® Iris® Xe Graphics with shared graphics memory,16GB, 2x8GB, DDR4, 3200MHz,512GB M.2 PCIe NVMe Solid State Drive, 39.6-cm. display. Make: Dell/HP/Samsung or Equivalent.

Projector:- Providing and Fixing 1080p Full-HD image projection up to 100" in the comfort with the W1050 You'll be captivated by theater-like image performance featuring over 96% coverage of Rec.709 and a 15000:1 contrast. Well designed for easy and flexible setup brings user-friendly experience, developing its own SmartEco Technology to perfect what DLP can do for energy saving. Built with this brand new invention, the W1050 brings together uncompromised brightness, exquisite picture quality and optimized lamp life through innovative features. • SmartEco Mode • No Source Detected Mode • Auto Power Off • 0.5W in Standby Mode. Make: View Sonic/Epson/Sony or Equivalent.

Camera:- Sensor: APS-C CMOS Sensor with 24.1 MP (high resolution for large prints and image cropping). Transmission frequency (central frequency):Frequency: 2 412 to 2 462MHz. Standard diopter :-2.5 - +0.5m-1 (dpt),ISO: 100-6400 sensitivity range (critical for obtaining grain-free pictures, especially in low light),Image Processor: DIGIC 4+ with 9 autofocus points (important for speed and accuracy of autofocus and burst photography), Video Resolution: Full HD video with fully manual control and selectable frame rates (great for precision and high-quality video work), Connectivity: WiFi, NFC and Bluetooth built-in (useful for remotely controlling your camera and transferring pictures wirelessly as you shoot), Lens Mount: EF-S mount compatible with all EF and EF-S lenses (crop-sensor mount versatile and compact, especially when used with EF-S lenses. Make: Sony/Nikon/Canon or Equivalent.

Recorder:- Supplig and Installaton Cam Recorder, with Ascu Lence, For recording HD Videos and ataching the unit to the main server complete. Make: Sony/ Nikon/ Canon or Equivalent.

Motorised Screen:- Supply and Fixing Motorised Screen Spectra White FG (fiberglass backed) matte white surface,180º wide viewing angle with 1.1 Gain, K Ultra HD and Active 3D Ready, K Ultra HD and Active 3D Ready, Diagonal sizes include 120" and 135" in 16:9 HD format, xtra top black border for high ceiling installation complete.

Audio System:- Supply, Installation, Testing & Commissioning 120 watts amplifiers of Bosch orequivalent make including Zone selector switch and an All call button and 1 No. goose neck microphone for public address system The work includes all necessary wiring & interconnections as required in the rack to make the system functional.Supply Installation Testing & Commissioning of music system comprising CD player with USB Port of PHILIPS / SONY or equivalent make.

Supply Installation Testing & Commissioning of point wiring for music-cum-PA system comprising of 2x1.5 sq.mm stranded, copper conductor, flexible PVC insulated and PVC sheathed wire pulled through 20 mm / 25 mm dia. FRLS PVC conduits heavy gauge and looped from one speaker to other and to the volume control switch wherever applicable and finally terminated on a tag block.

Supply Installation Testing & Commissioning of 8" dia music speakers (6 to 8WATTS) (Bosch LBD8353 + B377/equivalent model of approved make). All speakers to be equipped with Line matching transformer for direct connection to 4 to 6 Watts 100 / 70 V output line.

Roller Blind:- Providing and Fixing Roller Blind of approved make with complete chain macanaism and all.

Wooden Acoustical Ceiling System- Wooden acoustic tiles Providing and fixing wooden false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have plane surface at bottom of approved colour, Light Reflectance 85%, in true horizontal level suspended on interlocking T- Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge.The tile should be designed in a way to absorb sound and acoustical material to be used with the ceiling for sound absorbtion. Tile should be 18mm thick. Note:- The Bidder Shall quote his own rates for item rates.