MP Laghu Udyog Nigam Limited Tender

Providing and fixing of COMPUTER TABLE providing 1'8" wide & 2'6" L table top for each seating made of 19 mm comm b/b finished with 1 mm laminate 0.8 mm thick laminate inside having 1 nos 4" deep drawers with lock all side rubber wood beeding size of 40 mm x12 mm and the table is supported on base made of comm b/b finished with laminate, Provision for receway trays, drawer, CPU stand make provisions for networking & cable to run inside & foot rest shall be made. The rate shall include all necessary hardware like 3'' brass hinges, handles,drawer channels, locks etc.

5'x2'6" Table made of 19 mm comm b/b finished with 1 mmlaminate 0.8 mm thick laminate inside all side rubber wood beeding size of 40 mm x12 mm and 75 mm x40 mm thick hard wood foot rest with side cubboard 21'' x 27'' x24'' depth made in 19 mm bply top finished in teak ply, the table is supported on base made of comm b/b finished with laminate, Provision for two receway trays & foot rest shall be made.

Chair seat and back made of 10mm compressed molded ply with P.U. cushion on seat back with soft P.V. Handle base duly powder coated plated using upholstery of approved color with lift mechanism for revolving chair. High back with revolving

Medium back with revolving

Low back with revolving

Low back without revolving & lifting

RACK- Providing and fixing of Rack structure made MS Angle 40x40x5mm, center support of MS Flate and shelf 19 mm comm plywood, teakwood beading all side and finished with 1 mm laminate. Complete hardware.

Filling storage 1'6" deep & upto ceiling height, made of 19mm comm b/b finished with laminate externally & Internally the storage shall have intermediate shelf finished with hand polish as per design & detail.

Over Head Filling storage 1'6" deep & upto ceiling height, made of 19mm comm b/b finished with laminate externally & Internally the storage shall have intermediate shelf finished with hand polish as per design & detail.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up staqndard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold . Fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free straight, mitred and jointed mechanically wherever Aluminium Work required icluding cleat angle, Aluminium snap beading for glazing /paneling C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing and paneling to be paid for separately. Provinding & Fixing Aluminium 2 Track Windows with 4 mm thick glass Complete Hardware

Provinding & Fixing Aluminium Partition with laminated board & 4 mm thick glass Complete Hardware

Roller Blinds : Providing and fixing of vertical dust proof roller Blinds of approved shade texture and fabric ( opaque / eclipse )with aluminium gear androlling arrangement , duly powder coated with all necessary mechanism complete in all respects and properly finished to the satisfaction of engineer in charge.

Providing & applying superior grade plastic emulsion paint to internal wall surface to give an even shade in roller finish . Including thoroughly brushing the surface free from foreign matters, sand- papering smooth, filling in all holes & crapes applying acrylic putty & rubbing down the surface on coats of cement primer rate to include for all tool, labour scaffolding as reqd. complete as directed. B35

Note:- The contractor shall quote his own rates. For ITEM Rate for which no tender percentage above / below shall be applicable.