MP Laghu Udyog Nigam Limited Tender

(NON SOR) Providing and fixing decorative laminate as per Iswith marine grade PVA glue ( fevicol ) applied @ 0 .45 kg per sq mtr to partition , paneling , roof beam or similar places as directed in design and pattern having pin groove . 1.0 mm thk plain, gloss, suede . Satin finish

(NON SOR) Providing and fixing 08 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-Charge (Door handle, lock and stopper etc.to be paid separately).

(NON SOR) Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-Charge (Door handle, lock and stopper etc.to be paid separately).

(NON SOR) Table counter, 600 mm wide & 750 mm in height with provision of 300 mm wide hand rest at Customer side upto 1200 mm minimum all height - Providing and fixing table of specified size to be made up of 18MM BWP ply as per drawing using approved make hardware, having a storage unit with one drawers as per given drawing. Provision has to be made for keyboard tray, CPU stand.All exterior surfaces to be finished in 1.0mm laminates / corian as required specified by Architect and inner surfaces finished in 1.0 mm laminate of approved shade with necessary hardware such as handles wire manager, telescopic drawer slides, etc as per design all exposed edges to be finished with first quality Teak Wood beading which is to be melamine polished / pu coating. The cost is inclusive of all materials and labouretc complete in all respect as per drawing and direction given by Engineer in charge.

(NON SOR) Providing and fabricating storage almirah for records with provision of sliding shutter made of 18mm thick ISI BWR grade plywood finished with 1.00mm thick decorativee laminate inside and outside having compartments for office files, ledgers and other office articals all complete as per direction of Engineer-in-Charge (The job shall includes all material such as Door handle, lock, labour, wastages, etc. complete). Size 4.00x2.40

(NON SOR) Table 1800 x 750 x 750 - Providing and fixing table of specified size to be made up of 18MM BWP ply as per drawing using approved make hardware, having a storage unit with three drawers as per given drawing. Provision has to be made for keyboard tray, CPU stand. All exterior surfaces to be finished in 1.0mm laminates/ corian as required specified by Architect and inner surfaces finished in 1.0mm laminate of approved shade with necessary hardware such as handles wire manager, telescopic drawer slides, etc as per design all exposed edges to be finished with first quality Teak Wood beading which is to be melamine polished / pu coating. The cost is inclusive of all materials and labouretc complete in all respect as per drawing and direction given by Engineer in charge.

(NON SOR) Providing And Placing of Versa Neo VISITOR CHAIR FIXED : The chair should be of size 60.9 (W) x 64.3 (D) 99.5cm cushioned seat is to be made of injection molded plastic outer & inner. Plastic inner shall be upholstered with leatherette and moulded high resilience ( H R) Polyurethane foam of density 45+/-2kg/m compression. Seat Size should be 47.0 cm(W) x 48.0cm (D).The cushioned back is to be made of PU Foam with insitu molded MS E.R.WRound Tube of size 1.9+/-0.03cm x 0.16+/-0.0128cm. duely upholstered with leatherette. Mechanism - the tubular frame shall be cantilever type & made up of 02.54+/-0.03cm x 0.2+/-0.016cm thk S.S 202 tube. The back connect to frame through powder coated (DFT 40 -60 microns) high pressure die cast connector piece. Furniture Make- Haworth/Herman Miller/Godrej/Knoll (Greenguard GOLD/GRIHA/BIFMA Level 2 Certified) Design as approved by Engineer-In-charge.

(NON SOR) Providing and fixing in position fully upholstered sofa made with 18mm BWP ply and B grade teak wood frame. flat spring below foam at seat, stitching, slopes color, hemming with seat of 80mm thick softy foam and reckon filler, 100mm 40 density foam on back and arm with 40mm thick high density foam, seat and back covered with best quality markeen, and finished in fabric (of not less than Rs 1000 per mtr) of approved colour, texture and quality including teak wood molding / frame sofa to be made in the module of two seater with arms on both face, seat size 500x550mm over all depth 700mm. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge.