MP Laghu Udyog Nigam Limited Tender

Providing and erection of hot dipped galvanized octagonal poles in single section made from 3mm thick sheet having lockable weather proof flush door junction box, suitable size & type of foundation bolts 4 nos. 'J' type (EN8 grade) complete, erected in an approved manner on provided foundation. 7 meter height, 130 X 70mm A/F, 220x220x12mm base plate, 4 nos. X 20 x 700mm bolt.

Designing and construction of footing foundation for octagonal pole of desired size including excavation in soil/soft rock, base concrete M-7.5 (1:4:8), 15mm thick and pedestal of RCC M-20 (1:1.5:3), required tar steel reinforcement for required size from base concrete, shuttering, curing etc. with existing foundation bolts complete as per pecifications in an approved manner as per manufacturer drawing or engineer-in-charge.

Supplying and fixing of 32mm dia. X 2.00 meter long G.I. pipe (medium class) bracket for mounting of fluorescent /S.V/ M.H/ L.E.D lamp street light fittings on poles including bending the pipe to the required shape and wiring with 1.5sq.mm W.P./PVC wire etc. as required.

40 W Solar Light :- Supply semi integrated LED solar street light 40 W consists of solar photovoltaic module, battery, battery management system, control electronics, LED, microwave sensor, inter-connecting cable, and pole mounting piece integrated into the luminaries as a single unit. Solar street light with IP65 ingress protection having a system wattage of with 50 Wp high efficiency poly crystalline solar panel, highly efficient MPPT based charge controller and 12.8V24AH = WH lithium Ferro phosphate (LifeP04) Lithium-ion inbuilt 156 wh battery Li+ with smart battery capacity based dimming battery rechargeable - BIS certified cells-makeunicad/ Coslight/ Epitome or Equivalent BIS approved (working tempreture-10 C to 50 C) with proper battery management system. LED lumen efficacy shall be atleast 150 m/ W and driver should have 90% efficiency LED used high brightness high power LEDs make. Osram/ cree/ Nichia/ Bridgelux-LM80, L70 Compliance CCT 5700 K_+500 CCT ANSI CRI70 for LED charges controller inbuilt MPPT charge controller with Automatic dusk to down ON/OFF. It should have microwave sensor based movement detection and dim level adjustment to effectively extend the working time Dimming level PIR motion sensor based dimmimg - 100% once motion detected for 10 sec. and after that resume to 30% load. The fixture should be onsite configurable via a handhelp remote. The fixture should be wireless cabling, Zero electricity cost and selfautonomy 2 days with standard dimmimg profile, i/c five year warranty period. Local service centre should be available in Madhya Prades.The Luminaries should be housed in IK 08 impact resistance certified aluminium with polycarbonate lens cover. Protection over charge, deep discharge, reverse polarity, over load, tempreture compensation, No Load, short circuit the luminaries shall have a specially designed adjustable pole mounting piece for optimal light distribution. (MAKE :- INTELIZON, WIPPRO, BAJAJ, CROMPTON, PHILIPS)

Providing, Laying, Jointing & field testing of HDPE pipes (High Density Polyethylene Pipes) confirming to IS 4984/14151/12786/13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of teflon coated ekectric mirror/ heater to the required temperature and then pressing the ends togethers against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with jack/ hydraculic jacks/ buff fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed). 75 mm Dia.

Providing, Laying, Jointing & field testing of HDPE pipes (High Density Polyethylene Pipes) confirming to IS 4984/14151/12786/13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of teflon coated ekectric mirror/ heater to the required temperature and then pressing the ends togethers against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with jack/ hydraculic jacks/ buff fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed). 110 mm Dia.