MP Laghu Udyog Nigam Limited Tender

Providing and fixing of Mineral Fibre Acoustical Suspended Ceiling System with 16mm thick tegular edge tiles of size 595x595mm and Wooden ceiling system in mix design as approved by Engineer-in-charge, in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gsm/sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6 x mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications drawings and as directed by Engineer-in-charge. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥83%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 and7) in module size of 600 x 600 x 16mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled.

Supply, Installation, Testing and Commissioning of 4 feet 1x20 watt LED Decorative fitting complete with single 4 feet LED lamp to be fixed directly on surface of wall / ceiling with necessary hardware as per site conditions and connections with 3 core 1.5Sqmm copper flexible cable at either end and earthing.

Supply, Installation, Testing & Commissioning of 24 Port CAT 6 Key stone patch panel 1U size suitable for receiving CAT 6 cable with all fixing arrangement and connections.(D-Link, Legrand, Molex, Systemax, Valrack, AMP Make)

Stage Table :- The desk comprises of a Worktop made of pre-laminated MDF board OS, Side panels and Modesty panel and a freestanding pedestal. The entire desk unit is assembled with suitable KD fittings and hardware. Each side panel is provided with a cutout for laying cables for the monitor and other computer accessories. Top Shall be of Made from 25 mm Thick Pre-laminated Particle board. All the edges are sealed with 2 mm thick PVC edge band all around and sides shall be of Made from 25 mm Thick Pre-laminated Particle board. All the edges are sealed with 2 mm thick PVC Edge band on the user side and 0.8 mm on the Top and Bottom Side. The side panels have 2 glide screws each for leveling of the desk. Modesty Pannel will be of Made from 18 mm Thick Pre-laminated Particle board. All the edges are sealed with 0.8 mm thick PVC edge band all around Approved make: Godrej/featherlite/CSPL/Wipro.

Audotrium Chairs :- Providing supplying and fixing of approved quality / make executive theatre chair with handle and self tip up mechanism seat and back frames shall be made out of ERW tube fabric shall be of approved quality make and shade. Arm restwithout cup holder in graded plastic, seating arrangement numbering shall be clearly visible and of approved make. All structural connections, tapestry cushion etc. shall be as per Architects details and shall be as instructed by the Engineer - in - charge or his authorized agent / consultant. LEISURE model Self tilt up chair, roller / ball bearing type cushion, Injunction molding PPCP shell, ERW tube / IS : 3074 1976 Grade I with noise free zigzag spring, High tensile head cap screws, approved quality and make of fabric tapestry, fire retardant FMV SS - 302 tapestry / California technical bulletin scotch guard treated fabric, 3 mm th. PU foam flame lamination, high density CFC free PU foam having density 50 + 5 KG / M3 JIS K 6401. High tensile grade steel bolts and nuts, flat / spring / both type of expansion bolts. Exclusive theater chair with self tip-up cushion having roller & ball cage arrangement (roller/ball bearing type) for sliding mechanism, centre distance 21" / 22" (armrest to armrest) as specified by consultant, PP injection molding molded housing for seat & backrest. The cushion plastic housing should have acoustical perforation, back housing shall consist of one piece injection molding PPCP shell. Seat & back frames shall be made out of ERW tube/is: 3074 1976 grade 1, with noise free zigzag spring fitted with high tensile head cap screws. All sheet metal parts powder coated. Fabric shall be of approved quality/make/& shade of below specification. Flat jacquard woven with air texurised yarn and shelf woven design as/approved tapestry shall be fire retardant as perfmvss-302 or with California technical bulletin 117.scotch guard treated fabric shall be fitted with underlay of 3mm thk. PU foam flame lamination, supported with knitted back fabric for wrinkle free look, and also for better look with durability of fabric Approved make: Godrej/featherlite/CSPL/Wipro.

Sofa Chairs :- 1 Seater: Total Length 975, Total Width 885, c Total Height 810 w/o Legs, Seating Area Width 520, Seating Area Length 520, Seating Area Height from Ground 350 add leg height, Arm Height 470 add leg height, Arm Length 550 Back Height from Arm 340 j Back Width 365, arm Width 225 l Leg Height 125, Length between Legs 1750 -1220- 750 n Width between Legs 510. Made of 800 GLM PVC top coat 200, middle coat 500, fabric polyester knitted,Sautex fabric. FRAME MATERIAL (TROPICAL WOOD / PINE WOOD/ RUBBER WOOD): pine wood MOISTURECONTENT : less than 8%. Seat foam block foam in multiple of 24 mm.thickness 28- 30 kg./m3. BACK FOAM:block foam in multiple of 24mm thickness.Leg Material Mild Steel, Chrome plated 125 mm. Approved make: Godrej/featherlite/CSPL/Wipro.

AUDIO PODIUM WITH DIGITAL TEACHIND DEVICE:- This serves as the main component, for various computing spplication, audiomanagement with controlled input & output touch interactive oprations, camera for image/video input to streaming platform. 22" Top Display with captive Touch, Built in PC, 23" Goose Neck Microphone, Wireless Lapel Microphone, Cordless handheld Microphone, 120FOV, FHD webcam, Digital Audio Codec, Control Panel (On/off, Volume up/Dn & More) External HDMI, VGA & USB

Air Conditioning 3 Ton Split AC - Supply, Installation, Testing and Commissioning of modular type indoor units wired/wireless remote suitable for R410a refrigerant comprising of all accessories as per the specifications. The indoor units shall be suitable to work on cooling .The indoor units shall be suitable for operation on 220 ±6% volts,50Hz, 1 phase AC power supply. Ductable indoor units shall be suitable to handle extent of ductwork as shown in the design drawings and dehumidified air quantity as mentioned in the heat load summary sheet under "Special Conditions". The indoor unit shall be complete with pre filter & remote as per requirement .

Audio System:- Supply, Installation, Testing & Commissioning 120 watts amplifiers of Bosch orequivalent make including Zone selector switch and an All call button and 1 No. goose neck microphone for public address system The work includes all necessary wiring & interconnections as required in the rack to make the system functional.Supply Installation Testing & Commissioning of music system comprising CD player with USB Port of PHILIPS / SONY or equivalent make.

Supply Installation Testing & Commissioning of 8" dia music speakers (6 to 8WATTS) (Bosch LBD8353 + B377/equivalent model of approved make). All speakers to be equipped with Line matching transformer for direct connection to 4 to 6 Watts 100 / 70 V output line.

Speakers For Audotorium :- The next-generation JBL 308P MkII powered studio monitor makes legendary JBL performance available to every studio. With the revolutionary JBL Image Control Waveguide and refined transducers, JBL 308P MkII offers stunning detail, precise imaging, a wide sweet spot and impressive dynamic range that enhances the critical listening capabilities of any modern workspace. Featuring patented technologies derived from the JBL 7 Series and M2 Master Reference Monitors and sporting a sleek, modern design, JBL 308P MkII delivers outstanding performance and an enjoyable mix experience. Height- 419 mm , Width- 254 mm and Depth - 308 mm having Net Weight - 8.1 kg Haveing Analog Input Types 1 x XLR female, 1 x TRS female, balanced Input Sensitivity 92dB / 1m (-10dBV Input)

Roller Blind:- Providing and Fixing Roller Blind of approved make with complete chain macanaism and all.

Providing and supplying sections frame aluminium extruded tubular and work powder other aluminium sections frame coated work as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coated of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).

Dismantlaing Work + Termite Treatment - Dismentaling of existing wall panneling, removing of old auditorium chairs, dismentaling of existing false ceiling, dismentaling of existing flooring.

Providing and fixing modular work station of size 1500x1500 mm to suit the site layout approxmaitely consisting of poder coated aluminium frame work. Partical Board Postform Table top 25 mm thick, 1200 mm Hight Panels partition with glass, imported fabric, Pin up and writing board with required cable manager and skerting below table, Top along with Keyboard trey, CPU trolly.

Providing and placing in position panel based modular workstation of size 1350 mm(L)x600mm(D)with panel thickness as 50-60 mm thik and ht-1200 including powder coated aluminum trims. Tiles: Combination of top tiles are fabric tile front and metal tile at back. Bottom tiles - Metal tile. Intermediate Blocks – Intermediate blocks are given in DL+DL finish. Wire Management-Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Worksurface - out of 25 mm thick prelam particle board with flat pvc piping edge banding. CPU trolley-with castors

High Back Chair:-The cushioned seat assembly shall consist of insert moulded polyurethane foam upholstered with foam laminated mesh fabric. the insert moulded foam is assembled over a load bearing plastic seat cover. The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be (W)-48.5cm, (H)-62.0cm & size of seat shall be (W)- 51.0cm x (D)-52.5cm.armrest shall be injection moulded with height adjustable up to 4.5+/-0.5cm in 3 steps and width adjustable up to 20mm. The mechanism of chair shall have following features:360 degree revolving type, Front pivot Synchro mechanism, Tilt tension adjustment, 3 position tilt limiter with Anti-Shock feature. Spine bracket shall made of Aluminium diecast piece connecting back with mechanism. Neck rest assembly shall made up of polyurethane foam upholstered with foam laminated mesh fabric. The neck rest assembly is mounted on the top of back. it can be adjusted up to 4.5+/-0.5cm up-down and has regular adjustment of 30 degree +/-2 . The chair shall be provided with pneumatic height adjustment which shall have stroke of 9.0 +/- 0.3 cm. The pedestal shall be made of die-cast polished aluminium. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 66.0 +/- 0.5 cm pitch-centre-dia (76.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black nylon. Overall dimensions of Chair shall be, Width of Chair - 76.0cm, Depth of Chair - 76.0 cm as measured from pedestal below. Height from ground - min 100.0 to max 109.0 cm. Seat height - min 45.0cm to max 54.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Approved make: Godrej/featherlite/CSPL/Wipro.

Freestanding Pedestal:- The freestanding pedestal is made from 18 mm Pre-laminated Particle board with a combination of 2mm and 0.8 mm PVC Edge band on all the exposed surfaces as per requirement. The drawers are provided with suitable slides for smooth operation. All the pedestal drawers are centrally locked with a single key

Visitor Chair: - SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 cm thick hot pressed plywood, upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam is designed with contoured lumbar support for extra comfort. Mid back Chair 49.0cm.(W) x 47.0cm.(H) SEAT SIZE: 49.0cm.(W) x 44.0cm.(D) POLYURETHANE FOAM: The polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 on Hampden machine at 25% compression. ARMRESTS: The one-piece armrests made of black integral skin polyurethane with 50-70 Shore ‘A’ Hardness and reinforced with M.S. insert. The armrests are scratch and weather resistant. The armrests are fitted to the seat with seat/armrest connecting strip assembly made of 0.5cm. thk. HR steel. 4. TUBULAR FRAME : The tubular frame is cantilever type & made of Dia.2.54cm.(1”)x 14 BG M.S. E.R.W. tube and black powder coated. Approved make: Godrej/featherlite/CSPL/Wipro.

Storage:- Removing and replaceing the existing storage unit with storage made out of 18mm thick Partical Board and with the intermidiate slelving system with Shutters made out of 18mm thick Partical Board Dully Postformed. The Depth of the storage will be 450 mm.

DG's MEETING TABLE- Providing & Fixing of Confrence table dimension 700mm W x 750mm Ht. Worktop shall be made of 25mm plyboard with 1mm thick laminate on top and backing laminate of 0.6mm All the exposed edges are finished with 2mm thick PVC lipping machine pressed. Legs are made of 18mm plyboard of with aesthically designed elliptical Cover sections . Legs are designed to facilitate wire management . Cross Member are in 18mm plyboard and the Beam is made of MS and has size 75x50 mm of 1.5mm thickness in powder coated finish of 50 microns thickness and is connected with legs to allow for traversing of wires horizontally. The beam raceway provided with slots for fixing data and electrical switches and sockets for each user under the table. The above furniture should be as per specification and sample approved by client. Approved make: Godrej/featherlite/CSPL/Wipro.

DG's LOW BACK MEETING CHAIR- Size:Height Overall/Seat max:1105/510mm, Min:1020/440mm, Depth:660mm, Width:660mm, 5 Prong nylon base for stability. Twin wheel heavy duty castor for easy mobility under load. Hot pressed plywood with steel T Nuts for rigid fastening. Sturdy steel coloumn gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel coloumn. Lockable center tilt mechanism and with single peiece die castes PP arm rest. Quality leatherite upholstry with double stich. High density PU cushion. Approved make: Godrej/featherlite/CSPL/Wipro.

PANELLING WITH LAMINATE FINISH ON WOODEN FRAME -Providing and fixing Pine wood / 2nd class teak wood- wooden members of section size 50 mm X 40 mm (to level the surface) at a centre to centre distance of 600 mm both ways with the help of Fasteners/Screws etc.and fixing 12 mm thk commercial plywood (Green ply / Black berry / Century / Archid/Asis) of approved quality on the frame work and also on side Edges of frame. 12mm. tk X100 mm to 250mm wide additional Commercial Ply of approved quality is to be provided and fixed over 12mm. tk base panelling, on outer edges of Panelling to create a 100mm to 250mm wide frame work/Border all around the panelling as per design for Glass paneling.5.5 mm. th.Plain Mirror Glass of approved quality is provided in Panel created between ply border/frame with the help of necessary adhesives,Screw and Edge T.W. Beadings/PVC Beadings/12 mm. tk MDF Board Beading as per design.All exposed Ply Board surface and Edges af Board is to be laminated by fixing 1 mm thk Mica Laminate (Make:- Aerolam /Formica / Merino / Optus / Xylem) of approved Colour,quality ,texture and Make in approved Design and pattern.All wooden surfaces shall be melamine polished/Painted in approved shade and texture.This work will include all material,hardware, adhesive, lead, lifts for all floor, handeling and labour etc complete and nothing will be paid extra for execution of the item. All work is to be executed as per the direction and approval of Engineer In charge.

SINGLE BED- Providing and fixing of single bed of size 6'x3' made out of teak wood structure, the head rest to have curvilinear design of teak wood as per design and foot rest design to match with the headrest complete dully melamine polished. Top ply to be of 12mm thick and sides should be made of 18mm ply with 4mm thick veeneer ISO certified on it dully melamine polished. The bed to have a mattress of size 6'x3' of 8 inch thickness. Approved make: Godrej/featherlite/CSPL/Wipro.

SIDE TABLE- Providing and placing of bed side table made out of 18mm thick plyboard and 4mm veeneer on it. The side table to have a provision of 2 drawers with nob and drawers with telescopic channel for smooth functioning of it.All the exposed edges to be covered with teak wood lipping on to it duly melamined polished of approved shade. Approved make: Godrej/featherlite/CSPL/Wipro.

STUDY TABLE- Providing and placing of study table made out of teak wood structure and top to have a 18mm thick ply on it with 4mm veneer and legs to be in round shape of first qualtiy teak wood.All exposed wood and surface to be dully melamine polished.size 4'x2', table to have a provision of drawer with sliding channel.Approved make: Godrej/featherlite/CSPL/Wipro.

STUDY CHAIR- Providing and placing of chair made out of teak wood structure of 2"x 2" first quailty wood and with cushioned seat and back all the exposed surface of wood to have melamine polish. Chair has to be with wooden hand rest as per design. Approved make: Godrej/featherlite/CSPL/Wipro.

MOTRIZED SCREEN-Providing and fixing of moterised screen for projector size 8'x 10'

OVER HEAD PROJECTOR-Providing and fixing of overhead projector Brightness 5500 lumens, Resolution - WXGA, Light source- Lamp, Lamp life- upto 5000 hrs. Note:- The Bidder Shall quote his own rates for item rates 1 to 32