MP Industrial Development Corporation Limited Tender

Supplying and erection of stay set complete with16mm.dia 1.8 metre long stay rod, turn buckle, anchorplate of size 200mm x 200mm x 6.0mm, stay clamp,bow tightener, 7/3.15 dia G.I. stay wire etc. in cementconcrete M-10 (1 cement: 3 coarse and: 6 grandedstone aggregate 40mm nominal size) foundationincluding excavation and back refilling etc. asrequired. 11 Kv Stay Set

Supplying and fixing of I.S. & approved make M.S. Angle/Channel/Flat Iron fabricated fittings i.e. bracket/cross arm/clamps etc. on existing support for overhead line/bus bar/equipments including nuts & bolts, back clamp required holes, welding & other necessary work & materials required. (A) Nut Bolt

(b)11 KV Strain Hardware (T&C Type) fittings.

(c) D.C. Cross arm of M.S. Channel 100x50x6mm (8' Centre to centre)

(d) Transformer Belting Set 50x50x6mm Angle with two cross fixing channel.

(e) D.O. Mounting Channel 75x40x6mm

Supplying and fixing following glazed Polymer/porcelain insulators of approved make on existing pole bracket/cross arm with necessary material as required. 11 KV Composite Polymer Disc Insulator.

Supplying and drawing of AAAC Rabbit conductor 0.05 Sq. inch (55 Sq.mm Al. Eq.) confirming to IS:398-1976 of approved make, stringing, binding at existing insulator, jointing with jointing sleeves, jumpering, tearing off, connecting etc. with all accessories as required including cleaning of obstacles (if any) and required sag (Approx. 3%) 11 KV Conductor

Supplying, installing, testing and commissioning of11/0.4 KV 3 Phase 50 cycle oil immersed, naturally cooled, outdoor type transformer connected delta on H.T. side and star on L.T. side, dehydrating silica gel breather on eye level, rating and diagram plate, two earthing terminal, lifting lugs, oil level gauge, drain valve with plug, temperature not exceeding 50ºC on load, oil filling hole with plug, four unidirectional roller, arcing horns, explosion vent, terminal arrangement bushing on H.V. side and cable box on LV side, first filling of oil upto desired level and transformer installing on existing structure with all required materials arrangement as required ISI marked & as per IS specification, hand operated off load tap changer switch above 100 KVA, oil conservator with drain valve, plug 63 KVA and above. Aluminium wound BIS certified Energy Eff. Level-III 63 KVA Aluminium Wound.

Transformer Mounting Channel (100x50x6mm)

Bi - Metalic Clamp distribution transformers bushing

Bi- Metalic Clamp suitalbe 12mm dia stud and 80 Sq.mm. AAAC

L.T. Distribution box With isolator on incoming with HRC Fuse For 63 KVA DTR(200Amp. Isolator & amp;6 SP of 60 Amp) as per MP MKVV Co Ltd. Item Code M-0201128

Providing and fixing Supply of XLPE insulated power cable(conforming IS-7098 Part-I) 1100 Voltgrade, 1 core/2 core/3½ core/4 core ISImarked with alu. stranded /solidconductor. Unarmoured 1 core 50 sq. mm.

Providing and fixing Supply of XLPE insulated power cable(conforming IS-7098 Part-I) 1100 Voltgrade, 1 core/2 core/3½ core/4 core ISImarked with alu. stranded /solidconductor. Unarmoured 1 core 70 sq. mm.

3 Phase Static Energy Meter 22-80 amps with L.S.& TOD facility with box

11 KV D.O. Fuse Unit Polymer Type

Anti climbing device (Barbed Wire) GS 2.24mm dia (14 SWG)

Earthing set (DTR earthing) as per G1 Schedule G1 for Black Cotton Soil