MP Industrial Development Corporation Limited Tender

Providing and erection on existing foundation 20 meter high mast lighting system suitable to instal lupto 10 No. 2 x 250/ 400 w M.H/S.V/LED flood light and control gear with integral Power tool, weight 450 kg. comprising of 2 sections of hot dipped galvanized materials as per BSEN ISO 1461 thickness 3 mm & 4 mm, dia150 mm & 410 mm for top and bottom respectively,stress fitting arrangement on site with 500 mm overlap dynamic loading to with stand max wind pressure as per-IS 875 part III, parameters for structural & foundation design must be taken from wind tunnel test.Lightning protection of GI single spike1200 mm at top and at base inside compartment having double thickness 3 mm & 4 mm, dia 150 mm & 410 mm for top and bottom respectively, stress fitting arrangement on site with 500 mm overlap dynamic loading to withs tand maxwind pressure as per-IS 875 part III, parameters for structural & foundation design must be taken from wind tunnel test. Lightning protection of GI single spike1200 mm at top and at base inside compartment having double internal lock with adequate size of MCB erected on PVC board complete with base plate of 25 mm thick 570 mm dia. and foundation bolts having 8 nos. bolts of 30 mm dia 850 mm long (EN.8 grade) Anchor plate 490 PCD, including accessories viz.(1) Lantern carriage of 50 NBERW class-B, MS pipe covered with PVC sleeve suitable to carry 500 kg. load and upto 10 fittings symmetrically. (2) Trailing copper cable 5x4.0 sq.mm, PVC insulated PVC sheathed. (3) Double drum 750 Kg Winch having gear 53:1, oil bath (SAE90/140) arrangement. (4) 2 nos. stainless steel wire ropes 6 mm dia (7/19) breaking load capacity 2350 kg. x 2, (5) Integral powertool 3-phase, 1 HP 2m/m in single speed .torque limiter upto 500 kg adjustable (6) 2 Nos. LED 300 nos. aviation light (7) Feeder pillar fabricated out of 14 SWG CRCA sheet and comprise of incoming MCB 63 A TPN switch, HRC fuses, single dial timer, suitable size of contactors for lighting and power tool, 2 nos. outgoing, reversing switch for motor. (8) Foundation drawing, test certificate and guarantee certificate shall be provided by manufacturer.(without fixture and lamp) PWD E&M SOR 1.1.2024 I/42.97, P/156

Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/ 2 core/ 3½ core/ 4 core ISI marked with alu. stranded /solid conductor ARMOURED 4 CORE. PWD E&M SOR 1.1.2024 I/42.110, P/159

Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/ 2 core/ 3½ core/ 4 core ISI marked with alu. stranded /solid conductor ARMOURED 4 CORE. PWD E&M SOR 1.1.2024 I/41.1.10, P/122 16 sq. mm. I/41.1.10.3