MP Housing And Infrastructure Development Board Tender

Providing and placing ergonomically, comfortable and aesthetically design high back chair. Seat and back are made of hot pressed moulded 12+6 mm thick wooden twin ply upholster with PU foam denisty 40+/-2 kg/m3 in seat & PU foam denisty 32+/-2 kg/m3 in back and leatherite tapestry. Chair revolving in 360 degree and mechanism will be Swivel tilt type with one point locking and arm rest are made of polyurethane 45 mm width.The pneumatic seat height adjustable 100 mm in BIFMA standard class 3 and covered with telescopic polypropylene cover. Pedelstal is made of injection moulded polyproplene with chrome finish and fitted with 5 nos. twin wheels castors which are made of injection moulded black Nylon 6. The seat size 460mm H x 480 mm (D) x 520 mm and back height 700 from seat, Overall height of chair-1150

Supplying and placing ergonomically designed, comfortable & aesthetically appealing Low back chair. The seat shall be made of 15mm thick hot pressed plywood upholstered with high resilience polyurethane foam (25+19)mm thick having density (40, 32)kg/m³ with black foam net tapestry 0.9mm thick and 300 GSM and the back shall be made of 15mm thick hot pressed malaysian plywood on edges upholstered with HR polyurethane foam, 12mm thick having density 23kg/m³ with breathable green mesh tapestry. The seat and back shall be fixed with plywood & metal base frame the armrest shall be used PU arm completely joint with back. The chair shall have synchro tilt 3600 revolving mechanism with upright position locking and tilt tension adjustment.

Providing and placing ergonomically, comfortable and aesthetically design sofa. Frame, basic structure made of natural hard wood and commercial ply 12 mm thick and frame upholstery with density of 40kg/m3, 120mmthick & 12mm thick ,density of23 kg/m3 foam and 2mm dia wire spring also

Providing and placing The main frame of sofa is made of hard wood and commercial ply 12 mm Thick and uphostred with foam density 40 and 32 kg/m3 in seat and back and leatherite Tapestry. Leg frame is made of ss 202 grade pipe Size 20x40x1.2 mm thick and buffing bright finish. Pvc shoes are use in bottom of legs. Sofa size - 1800mm x 720mm x 790mm (LxDxH) - For Three seater

Providing and placing of aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood and the back shall be made of metal insert pipe frame padded with high resilience polyurethane foam 50mm thick having

Providing and placing of Visitor chair, PU Arms, silver Powder ceated pipe Frame, Net Back, Seat Fabric Tepestry. , comfortable and aesthetically design visitor chair. Back is made of polyproplene outer side and upholstered with nett or breathable mesh with ABS support.Seat is made of hot pressed 14 mm thick moulded wooden ply and upholstered with PU foam denisty 40+/-2 kg/m3 in seat & fabric. The seat frame is made of powder coated CRCA capsule/ elliptical shape pipe size 20mm x 10mm x 1.6mm thick. And arms rest are made of polyurethene. PVC shoes are insert into bottom of frame. Seat Size shall be 19" (Dp.)x 20"(Br.) and back height from seat 18.5".Overall height - 34.5"(inch.).

Providing and placing of visitor chair, the seat and back shall be made up of 1.2 cm. thick hotpressed plywood, upholstered with fabric and moulded polyurethane foam, together with moulded seat and back covers. The polyurethane foam is moulded with density = 45 +/- 2 kg/m3 and hardness = 16 +/- 2 kg. on Hampden machine at 25% compression. The seat & back cover is injection moulded in black co-polymer polypropylene. The onepiece armrests are made of black integral skin polyurethane with 50-70 shore ‘A’ hardness and reinforced with M.S. insert. The seat base stand is made of Powder coated 50-60 micron.CRCA metal dia 25.4x2mm thick and there are PVC shoes are also available in the bottom of frame. Seat size-475(W)450(D) Back size-475(W)400(H) seat to back height.

Providing and placing of ergonomically, comfortable and aesthetically design visitor chair. The seat and back are made of hot pressed 12+6mm thick moulded wooden twin ply upholstered with PU foam denisty 32 kg/m3 in back & PU foam denisty 40 kg /m3 in seat and leatherite tapestry.Arm rests are made of polyutherene and chair's base structure is made of CRCA pipe dia. 31.75mm x 2mm thick duly epoxy powder coated with 55 micron thickness.Whole CRCA metal frame meet international standard for strength and rigidivity. There are shoes are also available in the bottom of frame. The seat size 410 mm H x 490 (W) x 500 (D) and back height shall be 480 mm from seat & overall height : 890 mm.

Providing and placing low back Visitor chair. The seat & back are made of Hot pressed 12mm thick wooden ply upholstered with Foam denisty 40+/-2 kg/m3 in seat and 32kg/m3 in back & fabric tapestry. The onepiece armrests are made of black integral skin polyurethane with 50-70 shore ‘A’ hardness and bottom frame made of CRCA pipe dia 25.4mmx 2mm thick cantiliver type Chrome plated. The PVC shoes are available in the bottom of frame for avoid skretch on floor.Seat size shall be- 18.5" (W) x 18.5" (D) and back height shall be 15.5" from seat & overall height : 32" .

Providing and fixing of modular table with work top made of 43mm thickness grade II of IS 12823 of approve decorative color laminate on front, below 18mm work top 25mm thick mdf board with deco paint , the combination shall have grove of 9-12mm .work top of 43 mm thick supported by side storage unit and fixed drawer made of Pre-laminated particle board of grade II of IS 12823 .It shall have flat edges duly paseted of 2mm thick pvc edge bending , rest part of pre-laminted board of flat edges sealed with 1mm - 2mm thick machine pasted PVC beading duly pasted on through feed machine on 200 deegree celcius temp. Pre-laminated particle board of grade II of IS 12823 Modesty panel of 9mm thick clad with decorative laminate on both side , edges shall be sealed with pvc edge beading. Modesty panel shall have curve and bend shape which should fix on side unit and fixed drawer with 25mm ss finish round spacer . Complete table having knock down system on kd fittings. Darwer unit below the table fixed on table top of 3 box drawer having size of W500XD750 X640mmm. The drawer top , back and side panels including the drawer fasicas is made out Pre-laminated particle board of grade II of IS 12823 of 18mm thickness , edges dully sealed with pvc edge beading . The drawers boxes are mounted on rollers slides to enable smooth operation of the drawer .drawer box runs on bottom mounting channel 1 fiiling .The pedestal shall have central locking mechanism and handel . Side storage unit shall be of size W1800XD500XH640mm. storage cabinet carcass , shelves , back and shutters shall be made up of 18mm thick Pre-laminated particle board of grade II of IS 12823 storage have shutter and 2 drawer with telecsopic chhaanles for smooth opertaion of drawers. inner box all drawers shall be made of 18mm thick same colour , all drawer and shutter have 4'' steel brush finish branded handle , drawer lock with front lock systems. The products should be tested as per BIFMA standards.The product should have ISO-9001:2000 and ISO 14001-2004 certifiaction.The boards used sholud meet international standards of quality and safety, indian standard IS 12823 grade II should meet long time loadbending , screw - withdrawl strength and moudulus rupture and modulus of elasticity bending test as per IS 2380 (Part 4 ,Part 13 and Part 14).

Providing and fixing of modular table with work top made of 43mm thick, particle board of grade II of IS 12823 designation of approve decorative color laminate in swede/matt finish on front, below 18mm work top 25mm thick mdf board with deco paint , the combination shall have grove of 9-12mm. work top of 43 mm thick supported by side storage unit and flower leg 100x100mm made of Pre-laminated particle board of grade II of IS 12823. PLPB cald with decorative laminate . 125mm round pole base supoort to give better and floating look of table. It shall have flat edges duly paseted of 2mm thick pvc edge bending , rest part of pre-laminted board of flat edges sealed with 1mm - 2mm thick machine pasted PVC beading duly pasted on through feed machine on 200 deegree celcius temp. Front metal duly powder coated shall be epoxy polyester powder coated using the pre-treatment process with the powder thickness greater than 50-60 micron DFT (Dry film thickness), star perfortaed design on metal modesty of thickness 1.2 mm fixed on flower leg of 100x100mm. Complete table having knock down system on kd fittings. Darwer unit below the table fixed on table top of 3 box drawer having size of W400XD500X600mmm. The drawer top , back and side panels including the drawer fasicas is made out Pre-laminated particle board of grade II of IS 12823 of 18mm thickness , edges dully sealed with pvc edge beading . The drawers boxes are mounted on rollers slides to enable smooth operation of the drawer .The pedestal shall have central locking mechanism and ss brush finish handel . Side storage unit shall be of size W900XD450XH600mm. storage cabinet carcass , shelves , back and shutters shall be made up of 18mm thick Pre-laminated particle board of grade II of IS 12823 storage have sliding shutter with push back lock , all drawer and shutter have 4'' steel brush finish branded handle , drawer lock with front lock systems. work top made of 43mm thickness (18+25mm sandwitch combinantion worktop) three layer pre-laminated particle board of grade II of IS 12823 of approve decorative color laminate in swede/matt finish on front, below 18mm work top 25mm thick mdf board with deco paint , the combination shall have grove of 9-12mm. 125mm round pole base supoort to give better and floating look of work top. Key key board tray made up of 18mm thick pre-lminated particle borad which runs on telescopic channels for smmoth operation. Cpu trolley with castor made up of 18mm thick pre-lmainted particle board for place cpu . The products should be tested as per BIFMA standards.The product should have ISO-9001:2000 and ISO 14001-2004 certifiaction.The boards used sholud meet international standards of quality and safety, indian standard IS 12823 grade II should meet long time loadbending , screw - withdrawl strength and moudulus rupture and modulus of elasticity bending test as per IS 2380 (Part 4 ,Part 13 and Part 14).

Supplying & Placing of Conference table in completely knock down conditions with an overall size 7800mm X 1800mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The table top shall have the size 1500mm X 600mm in rectangle shape (8 nos.) & 1800mm X 900mm in Round shape (2 nos.) made up of 25mm thick pre-laminated particle board of grade II of IS 12823 with one side laminate and finish as per approved shade. The table top profile shall be in rectangle oval shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edgebander machine at 200 0C. The table top shall be supported by particle board base gable end. The end wall of the table on the side shall be topped by gable end. The gable end shall have the size 550mm X 715mm with 25mm thick. The gable end shall be made up of 12 nos. 25mm thick Pre-laminated particle board and the profile shall be in linear shape and edges sealed with appropriate PVC edge banding 1mm thick. The table shall be clad with 18mm thick modesty panel which provide structural support for the desk. The modesty panel shall have an overall size 1474mm X 600mm and 800mm X 600mm with 18mm thick pre-laminated particle board with appropriate PVC edge banding connected with both end. Wire carrier shall be provided below the table top for power connection having length 1400mm and 750mm X 60mm X 125mm. There shall be buffers provided to avoid scratches on the floor. The table connections have to be made in such a way that no gap should be seen in between. The manufacturer shall have quality and safety assurance like ISO-9001:2000 and ISO-14001:2004 certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.

Providing and fixing of modular table with work top made of 25mm thickness prelam particle board of grade II as per IS 12823 with flat edges, work top clad with decorative laminate on front as per standard and back side with white balancing . Flat edges duly sealed with 2mm thick machine pasted PVC beading . Table shall havetwo 'U'shape loop legs made of welded prime quality CRCA steel joined to rectangular ERW tubular frame of 60x30mm size and of 1.6mm thickness as per IS : 3074/05 grade ERW 1. All legs have level adjuster pvc shoes with plastic colour shoes cap, both legs jointed by 75x30x15mm die casted jointer through rectangular tubular pipe of 40x20mm size and 1.6mm thickness. All CRCA steel components / parts shall be epoxy polyester powder coated using the pre-treatment process with the powder thickness greater than 50-60 micron DFT (Dry film thickness), star perfortaed design on metal modesty of thickness 1.2 mm fixed on leg on front side of table. Mobile Darwer unit with castor below the table top of 3 box drawer (2 small drawer+1filling drawer)having size of W400XD450X650mmm. The drawer top , back and side panels including the drawer fasicas is made out Pre-laminated particle board of grade II of IS 12823 of 18mm thickness , edges dully sealed with pvc edge beading . The drawers boxes are mounted on rollers slides to enable smooth operation of the drawer .The pedestal shall have central locking mechanism and ss brush finish handel . Filling drawer runs on brabded telescopic channels for smooth opertation , rest two drawers on bottom mounting,channels. Key key board tray made up of 18mm thick pre-lminated particle borad which runs on telescopic channels for smmoth operation. Cpu trolley with castor made up of 18mm thick pre-lmainted particle board for c The products should be as per BIFMA standards. The boards used sholud meet international standards of quality and safety, indian standard IS 12823 grade II should meet long time loadbending , screw - withdrawl strength and moudulus rupture and modulus of elasticity bending test as per IS 2380 (Part 4 ,Part 13 and Part 14).

Supplying & Placing of Computer Desk of size 1200mm(W) X 600mm(D) X 750mm(H). It should have work top made up of 18mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The top board shall be supported on fixed pedestal at one end and fixed CPU unit at another end. The desk shall be clad with 18mm thick modesty panel which provides structural support for the desk. The modesty panel shall be 18mm thick pre-laminate particle board connected with both end. The table shall have 18mm thick pre-laminated particle board base keyboard tray with an overall size 550mm X 350mm. The keyboard trey shall be operated by sliding channels to enable smooth operation. At one side a fixed pedestal shall be provided having 3 drawer. The drawer shall be operated with roller channel and ball bearing channel. All drawer shall be operated with SS handle and multi purpose (MP) locking mechanism. Other side of table open type storage shall be provided having one adjustment shelf to accumulate CPU. Complete understructure made in 18mm thick Pre-laminated particle board with appropriate edge banding and drawer base shall be 9mm thick. To protect the wall from kicks, abrasion and serve as a decorative moulding skirting shall be provided at bottom at both side. The manufacturers hall have quality and safety assurance like ISO-9001:2015 and ISO-14001:2015, ISo-18001:2007, BIFMA membership and AIOTA certification. The board used should meet international standards of quality and safety, Indian standard IS12823 grade II should meet long time loadbending, screw–withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.

Providing and placing of a medium back chair ergonomicaly designed for complete lumber support.Seat and back is made of hot pressed 12mm+6mm thick wooden twin ply upholstered with PU foam denisty 40+/-2 kg/m3 in seat and leatherite tapestry.

Providing and placing of Workstation/ Visitor chair chairs, the seat and back shall be made up of 1.2 cm. thick hotpressed plywood, upholstered with fabric and moulded polyurethane foam. The polyurethane foam is moulded with density = 45 +/- 2 kg/m3 and hardness = 16 +/- 2 kg. on Hampden machine at 25% compression. The seat & back cover is fabric and pvc lipping all around. The onepiece armrests are made of black integral skin polyurethane with 50-70 shore ‘A’ hardness and reinforced with M.S. insert. The bottom frame is made of crca pipe dia 25mmx2mm thick powder coated and cantilever shape. Chair shall be upholstered in fabric of approved shade. Seat size-475 mm(W)450 mm(D) Back size-475mm(W)410 mm(H) seat to back height.Over all height : 810 mm

Providing and Supplying Almirah. The overall size is W 915 X D 485 X H 1980 mm. The constrution is Knockdown. The top, bottom, Frame, shelves and door are made up of CRCA sheet 0.8mm thick. The open handle in door is made of Polyprolane and lock is provided on to the Door. All steel component are epoxy powder coated with 50-60 micron thick (DFT) after 7 tank pre treatment process. It is made in dual tone colour to enhance its look.

Supplying & placing storage unit with an overall size 1800mm X 450mm X 900mm. It should be made up of Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. All profile i.e. side, back, top, shutter, shelf, skirting shall be 18mm thick and the edges shall be sealed with thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The storage shall have four adjustable shelf. 4 nos. of shutters shall be provided for opening and closing the storage. The shutter shall be operated with concealed crank hinge (soft-close) and leather handle. SS 202 grade pipe frame shall be provided on front of the storage having cross-section area 40mm X 20mm with 1.6mm thick. The storage shall be mounted on SS leg having cross-section area 80mm X 20mm. There shall be buffers provided at the bottom to avoid scratches on the floor. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The boards used should meet international standards of quality and safety, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of elasticity bending tested as per IS 2380.

Supplying & placing storage unit with an overall size 900mm X 400mm X 680mm. It should be made up of Pre-laminated particle board of grade II of IS 12823 with approved aminate and finish as per approved shade. All profile i.e. side, back, top, shutter, shelf, skirting shall be 18mm thick and the edges shall be sealed with thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The storage shall have 1 nos. of door shutter, 1 nos. of drawer and. The door and drawer shall be operated with the assistance of concealed crank hinge and profile handle for door. The storage shall be mounted on SS leg with shiny chrome finish having cross-section area 80mm X 20mm. There shall be buffers provided at the bottom to avoid scratches on the floor. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The boards used should meet international standards of quality and safety, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of elasticity bending tested as per IS 2380.

Providing, Placing and Installing in position -Slotted Angle rack with overall size- W 900 X D 300 X H 1800 mm Panel is made in 0.8 mm thick five numbers CRCA sheet of shelves in four compartments. Racks'angles made of slotted CRCA angle size-40X40X2mm thick. All Steel components will be powder coated 50-60 micron thick (DFT) after 7 tank pre-treatment process flow.Cornor plat (Gussets) and All fastners are Provided.

Providing and placing of Stool laminated top + powder coated,Size. H450mm XD300mm XW300mm Structured made by crca square pipe, pipe size 25X25X1.25 thickness, paint epoxy powder coated black

SITC Central Unit Power Req. AC mains, 50/60 Hz Power Consumption Max. 60 W Rated Output 35V DC, 650mA × 2 Input MIC: –60 dB*, 600 ohms, unbalanced, phone jack AUX: –20 dB*, 10k ohms, unbalanced, phone jack Output Recording: –20 dB*, 10 k ohms, unbalanced, phone jack, pin jack × 2 Equalizer Insertion Input Terminals Input: –20 dB, 10 kΩ, pin jack Output: –20 dB, 10 k ohms, pin jack Expansion Input/Output Terminals Input: –20 dB, 10 k ohms, pin jack × 2 Output: –20 dB, 10 k ohms, pin jack × 2 Control: 10 k ohms or more, voltage output, pin jack × 2 Control Priority Speech chime: Operation of TS-771's priority button activates a single-tone chime Speaker restriction: Number of simultaneously-usable TS-772s and TS-775s can be set to 1, 3, or 6 Automatic Mic-off: Function OFF/20 s/40 s (selectable) Number of Connectable Conference Units 70 (Max. 35 units per line), Max. 210 (with 3 Central Units) - Approved Make - TOA / Sennisher / Telex OEM Aurthorization Must Reqired

SITC Chairman Unit Power Req. 35 V DC, under 30 mA (supplied from Central Output Headphone/ Recording: 32 ohms (headphone) 10 k ohms, –20 dB* (recording), unbalanced, mini jack (with VR) Internal speaker: 130 ohms 200 mW Contact output: 24 V DC, max. 50 mA (open collector output) Control Speech button: Microphone, speaker on-off control by speech switchPriority button: Microphone, speaker on-off, other microphone coutoff, and single-tone chime activation Connection Cable 2m (6.56 ft)Operating Temperature 0°C to 40°C (32°F to 104°F)Operating Humidity Under 90 % RH (no condensation) Approved Make - TOA / Sennisher / Telex OEM Aurthorization Reqired

SITC Delicate Power Req. 35 V DC, under 30 mA (supplied from Central Unit Output Headphone/Recording: 32 ohms (headphone) 10 k ohms, –20 dB (recording), unbalanced, mini jack (with VR) Internal speaker: 130 ohms 200 mW Contact output: 24 V DC, max. 50 mA (open collector output) Control Microphone, speaker on-off control by speech switch Connection Cable 2m (6.56 ft) Operating Temperature 0°C to 40°C (32°F to 104°F) Operating Humidity Under 90 % RH (no condensation) Finish Case: ABS resin, black Panel: ABS resin, gray metallic, semi-gloss, paint Approved Make - TOA / Sennisher / Telex OEM Aurthorization Must Reqired

SITC - Native Resolution WXGA (1280x800) Brightness 5,000 ANSI Lumens Contrast Ratio 15000:1 Max. Resolution WUXGA (1920x1200) @60Hz Native Aspect Ratio 16:10 Lamp Life and Type 2500/3000/3500 Hours (Normal/Eco./Image Care Mode), 310W/245W Display Type Single 0.55"

SITC - of 100 volt professional mixing amplifier 4 microphone inputs with integrated speech filters, 4 selectable line inputs and one emergency line / telephone input are available where MIC input 1 is meant to be the main microphone paging input. 3-level priority system where the emergency line / telephone input at the back have the highest priority. MIC1 has the second priority level and the third priority level can be activated by a dry contact at the back of the amplifier that mutes all background music inputs and activates the integrated chime. Further the MA125 is supplied with detachable 19” brackets. Approved Make Apart Audio / Labgruppan / Bose OEM Aurthorization Must Reqired

SITC- 5” (125 mm) Low Frequency Driver 1″ (25 mm) High Frequency Driver High performance coaxial driver

SITC of Handheld Wireless Mic with THD, total harmonic distortion ≤ 0.9% Pick-up pattern cardioid Signal-to-noise ratio ≥ 103 dBA RF output power 10 mW Switching bandwidth up to 24 MHz Modulation wideband FM Frequency 8 frequency banks, each with up to 10 factory-preset channels Sensitivity 3 μV at 52 dB(A)rms S/N Synchronization 2.4 GHz, Low Power OQPSK Input sensitivity 1.5 mV / Pa Adjustment Range Transmitter 0 to -30 dB, adjustable in 10 dB steps Audio adjustment range 45 dB, adjustable in 5-dB steps - Approved Make Sennheiser / Shure / Beyer Dynamic

SITC of Gooseneck microphone with table top stand with ON/OFF Switch RF shielding against intermodulation from wireless devices Streamlined design for seamless integration Integrated light ring Impedance 100 Ω Frequency response (microphone) 50 Hz - 20 kHz Transducer principle (Microphone) pre polarised condenser microphone Pick-up pattern cardioid Operating

Connectors Approved Make - Nuetrik / Kramer / Fidelity

Speaker Cable: 2 core 2.5 sq mm PVC insulated Cu conduction loudspeaker cable. (Made in Germany) - Approved Make - Klotz / QED / Atholona / Fidality

Microphone Cable: 2 core PVC insulated Cu conduction sheilded microphone cable. (Made in Germany)- Approved Make - Klotz / QED / Atholona / Fidality

Projector Mount

8X6 Motarized Projection Screen Approved Make Custom .