MP Building Development Corporation Limited Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
MP Building Development Corporation Limited Tender
Furnitures and Fixtures
Eprocure
Opening Date19 Dec 2024
Closing Date9 Jan 2025
Tender Amount₹ 42,26,71,452
Costs
EMD
₹ 21,13,000Document Cost
₹ 59,000Tender Fee
₹ 1,180
Summary
Providing, Supplying And Fixing Of Furniture For C.m. Rise Schools Of S.e.d. In M.p. Nit 062
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MPBDC_389533_1Tender No
2024_MPBDC_389533_1Tender Authority
MP Building Development Corporation Limited ViewPurchaser Address
-Website
http://mptenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Large revolving Chair for principal
Providing and fixing in position at required location dimension of product to be supplied are Overall Size - Max/Min. Height-1230/1150mm, Width-700mm, Depth - 750mm, Seat Height-580/500mm, Seat Size-W-535mm x D-500mm, Back Size-H-740mm x W-535mm. 5-Prong nylon base for stability of 700 mm Dia (including Castors in open condition). Chair to be fitted with twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed plywood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS coverover steel column. Lockable center tilt mechanism and with Single piece die castes Nylon arm rest with Cushion. Premiun Quality Leatherette with minimum 500 GSM, with single and double stitch. Lethearite to be used are with perforations for the touch areas of seat & back. Foam Thickness: 50 mm thick with Foam density to be 32 - 45 KG/m3. The overall construction shall be as per product drawing given. In case there is any deviation between above defined specification & drawing, the above specification shall prevail. All dimensions can have +/-5 mm tolerance. Raw Material thickness can have +/-2% tolerance. The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
Revolving Chair for office Staff & Teachers- C2 Providing and fixing in position at required location Specification dimension of product to be supplied H: 910- 1010mm, Seat H: 470-570mm, D:
575mm, W: 580mm: 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed plywood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Lockable center tilt mechanism and with Single piece Die castes PP arm rest. Quality tapestry.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
1584
-
-
... More
Back Runner- Low Height Storage Providing and fixing in position at required location of Storage Size:- Width - as per requirement, Depth (in mm) 400 Height (In mm) 750
Strorage Top Made From 25 mm Thick Prelaminated MDF.
Sides, Bottom & Back Panel Made From 18mm Thick Prelaminated MDF.
Door Made From 18mm Thick Prelaminated MDF.
No of Shelf Will be 1 No All open Edge covered with 2mm/0.8 Thick Edge Band As per Design Requirement.
Unit will have groove handle.
Shutters hang on Modular Hinge.
Storage is provided with lock for security.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
277.2
-
-
... More
Pinup Board Providing and fixing in position at required location Alfa Pin up Board Size 900mm x 1200 mm - Display Surface Acrylic Velvet Fabric in (Blue,Green Maroon Colours)} with following specification. Core material Premium Quality Soft Board 12mm thickness to make the Board Warp-free and 100% Flat. Backer sheet 0.82mm. thick laminated sheet with extra melamine surface mix colour. Frame Spec’s - Core : 15 mm. Section Size : 23 H x 18.5 W. Wall thickness : 1.1 mm ( ±0.1). We will Provide Powder Coating in Frames.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
264
-
-
... More
Roller Blinds: Providing and fixing manually operating & with decorative of Roller blinds/vertical blinds with composition of 100% polyester with washable fabric duly fixed with powder coated aluminum channel and clamps having nylon rope for manual operation of approved colour, design and texture in required pattern, including cost of all materials and labour involved forcomplete work etc. as per drawing, specifications and as directed by
Engineer-in-charge. Make: MaC/ AD/ S3/ Talgo/ Ami
712.8
-
-
... More
PRINCIPAL CABIN
-
-
-
... More
Large revolving Chair for principal Providing and fixing in position at required location dimension of product to be supplied are Overall Size - Max/Min. Height-1230/1150mm, Width-700mm, Depth - 750mm, Seat Height-580/500mm, Seat Size-W-535mm x D-500mm, Back Size-H-740mm x W-535mm. 5-Prong nylon base for stability of 700 mm Dia (including Castors in open condition). Chair to be fitted with twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed plywood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS coverover steel column. Lockable center tilt mechanism and with Single piece die castes Nylon arm rest with Cushion. Premiun Quality Leatherette with minimum 500 GSM, with single and double stitch. Lethearite to be used are with perforations for the touch areas of seat & back. Foam Thickness: 50 mm thick with Foam density to be 32 - 45 KG/m3. The overall construction shall be as per product drawing given. In case there is any deviation between above defined specification & drawing, the above specification shall prevail. All dimensions can have +/-5 mm tolerance. Raw Material thickness can have +/-2% tolerance. The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
Visitor/ Teachers Chair Providing and fixing in position at required location size: Total Height-850mm, Depth 570mm, Width-550mm Seat Height:440mm. Under Structure cantilever type MS cold rolled close annealed Tube 1.6 mm thick. Hot pressed ply wood with steel T-Nuts for rigid fastening. Single piece integral skin PU arm rest. Quality tapestry. High density PU moulded cushion. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. Upholstery 1.5 Mtr.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
264
-
-
... More
Revolving Chair for office Staff & Teachers- C2 Providing and fixing in position at required location Specification dimension of product to be supplied H: 910- 1010mm, Seat H: 470-570mm, D:
575mm, W: 580mm: 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed plywood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Lockable center tilt mechanism and with Single piece Die castes PP arm rest. Quality tapestry.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
2 Seater Sofa Providing and fixing of 2 seater sofa with Overall Size 1350 mm(W) 770 mm(D) 730mm (H). Seat Ht 450mm. Handle Ht- 620mm. Upholstery Material: Premium Quality Pu Cloth/Leatherite. Frame Material : Combination of plywood and pine Wood, Plywood thickness : 12 mm (moisture resistance and termite free) & 3 mm. Pinewood cross section - 22x64 mm. Moisture content: 10-12%. Seat Material : 45 mm thick U foam, Density : 32. Super soft 45 mm at top. Dacron 150GSM. Back Material : 45mm thick U foam, Density : 28. Super Soft 45 mm. 22mm thick U foam, Density : 28. Outer foam 10 mm thick, Density 28. Dacron 150 GSM. Fitted with 75 mm wide elastic belts. S/Zick Zack Spring of dia. 3.8 mm mounted on seat structure using Metal mounting clip. Legs : Prime quality Metal, Ht. 150mm.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
132
-
-
... More
Large Table with lockable storage for Principal - Table Type-1 Providing and fixing Table Size:- Length:2100mm, Width: 900mm, Height: 750mm, Top made of 36 mm thick Pre-laminated MDF Board. PVC edge beading of 2 mm edges by Through Feed Machine. Provision of Cable manager on both sides of the Table. Cable duct made of 0.8 mm CRCA Sheet. Leg/Side made of 25 mm thick Pre-laminated MDF fitted with Aluminium section of size 60X40 with grooving. Leg/Side Base & Top plate with profile cut made of M.S. plate 4 mm thk with knock down fitting arrangement. Modesty panel made of 18 mm thick Prelaminated MDF Board with PVC Edge Band. Mobile Pedestal of 2 Drawer + 1 Filling unit, made of 18mm thk Prelaminated MDF Board with PVC edge banding. All drawers shall have a central lock mechanism. Handles to be made of SS. The overall dimension of the unit should be H:660xW:400xD:450 mm. The height of the drawer is inclusive of the Castors. SDU with Drawer- Size: Height:750mm, Width:900mm, Depth:450mm. Top made of 18mm thick Pre-laminated MDF Board. Side Edges covered with PVC edge band on edge bending machine. Provision of drawer below table top with telescopic channel. Drawer should be made of 0.8 mm thick MS CRCA Sheet. Superior Quality make lock. Frame assembly/Shelf/Door Assy. should be made of 0.8 mm thick MS CRCA. Use only MIG/TIG & Spot welding for fabrication. PVC handles. Doors are Top hung slide on roller bearing. Leveller plate should be made of 1.6 mm thick MS CRCA Sheet. All steel components are to be epoxy powder coated after seven tanks anti corrosion treatment of surface.
The overall construction shall be as per product drawing given. In case there is any deviation between above defined specification & drawing, the above specification shall prevail. All dimensions can have +/-5 mm tolerance. Raw Material thickness can have +/-2% tolerance.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
66
-
-
... More
Side Table Providing and fixing in position at required location dimension of table should be,
600 x 600 x 450 mm. Top made of 18 mm thick Prelaminated MDF board with edge effect of 30 mm thick With 10 mm thick Glass. Under structure made of 25x25x1.6 mm thick CRCA Square Tube. All steel components are to be epoxy powder coated after seven tanks anti corrosion treatment of surface.
The product should be as per approved drawing from Engineer-In-Charge/Architect
66
-
-
... More
Back Runner- Low Height Storage Providing and fixing in position at required location of Storage Size:- Width - as per requirement, Depth (in mm) 400 Height (In mm) 750
Strorage Top Made From 25 mm Thick Prelaminated MDF.
Sides, Bottom & Back Panel Made From 18mm Thick Prelaminated MDF.
Door Made From 18mm Thick Prelaminated MDF.
No of Shelf Will be 1 No All open Edge covered with 2mm/0.8 Thick Edge Band As per Design Requirement.
Unit will have groove handle.
Shutters hang on Modular Hinge.
Storage is provided with lock for security.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
138.6
-
-
... More
Wall mounted cabinet with transparent panels - Type 2
Providing and fixing Free Standing Cabinet of Overall Dimension 950mm L x 300/450mmD x 2100 mm H. Overall Structure made of pre laminated MDF board with 2 mm thick Edge Banding. Size of bottom storage should be 950x450x757 mm Ht. with openable door with handles and one Lock. One Bottom storage shelf made of 18 mm thick MDF. The Top of the Bottom Storage Unit is 25 mm Prelaminated MDF with 2 mm thick Edge Banding. 6 nos of leveller has been provided at bottom for maintaining level. It also preventing scratches on floor & Product as well. The size of Upper Storage/ Display Unit is 950 mm W x 1343 mm H x 300 mm D. There will be 5 nos. of Glass display shelves (half length) of 8 mm thick Glass, placed at criss cross height, as shown in the drawing. The glasses need to be fixed with Back/ sides with the help of high quality Glass holding hardware, 3 nos. of hardware per glass. the wdges of the glass should be properly finished for safety. The sides are to be made of Pelaminated MDF of 18 mm thick with 2 mm Thick Edge Banding. the Top will be made of Pelaminated MDF of 25 mm thick with 2 mm Thick Edge Banding.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
Computer Workstation Table for office staff - Table Type 3 Providing and fixing in position at required location of table dimension of 900 mm L x 600mm W x 760mm H. The Worktop should be made of 25 mm thick PreLaminated MDF Board. with 2mm thick PVC edge banding with hot melt glue. Both the side panels are to be made of 25 mm thick PreLaminated MDF Board. The table should have a Modesty Panel of entire length of 900 mm, with a height of 600 mm from top, made of 18 mm thick Pre Laminated MDF Board. The table to have a drawer made of MDF Board with dimension of 400 mm Width x 450 mm Depth x 150 mm Height. The Drawer will move on Single/Double Extension Ball Slide. The Drawer will also have a provision of Locking. The Table will have Leveller at bottom for adjusting for minor undulation of the floor, and also to prevent scratches on floor/ product.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
66
-
-
... More
Pinup Board Providing and fixing in position at required location Alfa Pin up Board Size 900mm x 1200 mm - Display Surface Acrylic Velvet Fabric in (Blue,Green Maroon Colours)} with following specification. Core material Premium Quality Soft Board 12mm thickness to make the Board Warp-free and 100% Flat. Backer sheet 0.82mm. thick laminated sheet with extra melamine surface mix colour. Frame Spec’s - Core : 15 mm. Section Size : 23 H x 18.5 W. Wall thickness : 1.1 mm ( ±0.1). We will Provide Powder Coating in Frames.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
Wooden Panelling Providing and fixing paneling on wall, on G.I hat furring channel 22-25 depth with grid size 600mmx 600mm both ways fixed to wall, columns in any profile and covered with 8 mm. thick HDHMR of approved make and finished with 1 mm Laminate as approved on exposed faces with grooves as per design.The rates shall include all hardware, fittings, adhesives, beadings, lippings etc.
660
-
-
... More
White Board Providing and fixing in position at required location white Board of size 900 mmx 1200mm with viCreous enamel steel sheet made of 0.3mm to 0.40mm thick steel sheet with “Ceramic steel” (having vitreous enamelled coating both sides), 0.095mm thick top surface coating and back surface coating thickness of 0.03mm supported with 9mm thick MDF Board back support and backing with 0.25 mm thick galvanized steel sheet fixed with anodized aluminium frame 20mm wide and 1.2mm thick and board shall be given additional support at bottom with Aluminium 3-Clamps.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
Roller Blinds: Providing and fixing manually operating & with decorative of Roller blinds/vertical blinds with composition of 100% polyester with washable fabric duly fixed with powder coated aluminum channel and clamps having nylon rope for manual operation of approved colour, design and texture in required pattern, including cost of all materials and labour involved forcomplete work etc. as per drawing, specifications and as directed by
Engineer-in-charge. Make: MaC/ AD/ S3/ Talgo/ Ami
356.4
-
-
... More
VICE PRINCIPAL
-
-
-
... More
Large revolving Chair for principal Providing and fixing in position at required location dimension of product to be supplied are Overall Size - Max/Min. Height-1230/1150mm, Width-700mm, Depth - 750mm, Seat Height-580/500mm, Seat Size-W-535mm x D-500mm, Back Size-H-740mm x W-535mm. 5-Prong nylon base for stability of 700 mm Dia (including Castors in open condition). Chair to be fitted with twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed plywood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS coverover steel column. Lockable center tilt mechanism and with Single piece die castes Nylon arm rest with Cushion. Premiun Quality Leatherette with minimum 500 GSM, with single and double stitch. Lethearite to be used are with perforations for the touch areas of seat & back. Foam Thickness: 50 mm thick with Foam density to be 32 - 45 KG/m3. The overall construction shall be as per product drawing given. In case there is any deviation between above defined specification & drawing, the above specification shall prevail. All dimensions can have +/-5 mm tolerance. Raw Material thickness can have +/-2% tolerance. The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
Visitor/ Teachers Chair Providing and fixing in position at required location size: Total Height-850mm, Depth 570mm, Width-550mm Seat Height:440mm. Under Structure cantilever type MS cold rolled close annealed Tube 1.6 mm thick. Hot pressed ply wood with steel T-Nuts for rigid fastening. Single piece integral skin PU arm rest. Quality tapestry. High density PU moulded cushion. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. Upholstery 1.5 Mtr.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
264
-
-
... More
Revolving Chair for office Staff & Teachers- C2 Providing and fixing in position at required location Specification dimension of product to be supplied H: 910- 1010mm, Seat H: 470-570mm, D:
575mm, W: 580mm: 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed plywood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Lockable center tilt mechanism and with Single piece Die castes PP arm rest. Quality tapestry.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
2 Seater Sofa Providing and fixing of 2 seater sofa with Overall Size 1350 mm(W) 770 mm(D) 730mm (H). Seat Ht 450mm. Handle Ht- 620mm. Upholstery Material: Premium Quality Pu Cloth/Leatherite. Frame Material : Combination of plywood and pine Wood, Plywood thickness : 12 mm (moisture resistance and termite free) & 3 mm. Pinewood cross section - 22x64 mm. Moisture content: 10-12%. Seat Material : 45 mm thick U foam, Density : 32. Super soft 45 mm at top. Dacron 150GSM. Back Material : 45mm thick U foam, Density : 28. Super Soft 45 mm. 22mm thick U foam, Density : 28. Outer foam 10 mm thick, Density 28. Dacron 150 GSM. Fitted with 75 mm wide elastic belts. S/Zick Zack Spring of dia. 3.8 mm mounted on seat structure using Metal mounting clip. Legs : Prime quality Metal, Ht. 150mm.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
132
-
-
... More
Side Table Providing and fixing in position at required location dimension of table should be,
600 x 600 x 450 mm. Top made of 18 mm thick Prelaminated MDF board with edge effect of 30 mm thick With 10 mm thick Glass. Under structure made of 25x25x1.6 mm thick CRCA Square Tube. All steel components are to be epoxy powder coated after seven tanks anti corrosion treatment of surface.
The product should be as per approved drawing from Engineer-In-Charge/Architect
66
-
-
... More
Large Table with lockable storage for Principal - Table Type-1 Providing and fixing Table Size:- Length:2100mm, Width: 900mm, Height: 750mm, Top made of 36 mm thick Pre-laminated MDF Board. PVC edge beading of 2 mm edges by Through Feed Machine. Provision of Cable manager on both sides of the Table. Cable duct made of 0.8 mm CRCA Sheet. Leg/Side made of 25 mm thick Pre-laminated MDF fitted with Aluminium section of size 60X40 with grooving. Leg/Side Base & Top plate with profile cut made of M.S. plate 4 mm thk with knock down fitting arrangement. Modesty panel made of 18 mm thick Prelaminated MDF Board with PVC Edge Band. Mobile Pedestal of 2 Drawer + 1 Filling unit, made of 18mm thk Prelaminated MDF Board with PVC edge banding. All drawers shall have a central lock mechanism. Handles to be made of SS. The overall dimension of the unit should be H:660xW:400xD:450 mm. The height of the drawer is inclusive of the Castors. SDU with Drawer- Size: Height:750mm, Width:900mm, Depth:450mm. Top made of 18mm thick Pre-laminated MDF Board. Side Edges covered with PVC edge band on edge bending machine. Provision of drawer below table top with telescopic channel. Drawer should be made of 0.8 mm thick MS CRCA Sheet. Superior Quality make lock. Frame assembly/Shelf/Door Assy. should be made of 0.8 mm thick MS CRCA. Use only MIG/TIG & Spot welding for fabrication. PVC handles. Doors are Top hung slide on roller bearing. Leveller plate should be made of 1.6 mm thick MS CRCA Sheet. All steel components are to be epoxy powder coated after seven tanks anti corrosion treatment of surface.
The overall construction shall be as per product drawing given. In case there is any deviation between above defined specification & drawing, the above specification shall prevail. All dimensions can have +/-5 mm tolerance. Raw Material thickness can have +/-2% tolerance. The product should be as per approved drawing from Engineer-In-Charge/Architect
66
-
-
... More
Back Runner- Low Height Storage Providing and fixing in position at required location of Storage Size:- Width - as per requirement, Depth (in mm) 400 Height (In mm) 750
Strorage Top Made From 25 mm Thick Prelaminated MDF.
Sides, Bottom & Back Panel Made From 18mm Thick Prelaminated MDF.
Door Made From 18mm Thick Prelaminated MDF.
No of Shelf Will be 1 No All open Edge covered with 2mm/0.8 Thick Edge Band As per Design Requirement.
Unit will have groove handle.
Shutters hang on Modular Hinge.
Storage is provided with lock for security.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
138.6
-
-
... More
Wall mounted cabinet with transparent panels - Type 2
Providing and fixing Free Standing Cabinet of Overall Dimension 950mm L x 300/450mmD x 2100 mm H. Overall Structure made of pre laminated MDF board with 2 mm thick Edge Banding. Size of bottom storage should be 950x450x757 mm Ht. with openable door with handles and one Lock. One Bottom storage shelf made of 18 mm thick MDF. The Top of the Bottom Storage Unit is 25 mm Prelaminated MDF with 2 mm thick Edge Banding. 6 nos of leveller has been provided at bottom for maintaining level. It also preventing scratches on floor & Product as well. The size of Upper Storage/ Display Unit is 950 mm W x 1343 mm H x 300 mm D. There will be 5 nos. of Glass display shelves (half length) of 8 mm thick Glass, placed at criss cross height, as shown in the drawing. The glasses need to be fixed with Back/ sides with the help of high quality Glass holding hardware, 3 nos. of hardware per glass. the wdges of the glass should be properly finished for safety. The sides are to be made of Pelaminated MDF of 18 mm thick with 2 mm Thick Edge Banding. the Top will be made of Pelaminated MDF of 25 mm thick with 2 mm Thick Edge Banding.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
Computer Workstation Table for office staff - Table Type 3 Providing and fixing in position at required location of table dimension of 900 mm L x 600mm W x 760mm H. The Worktop should be made of 25 mm thick PreLaminated MDF Board. with 2mm thick PVC edge banding with hot melt glue. Both the side panels are to be made of 25 mm thick PreLaminated MDF Board. The table should have a Modesty Panel of entire length of 900 mm, with a height of 600 mm from top, made of 18 mm thick Pre Laminated MDF Board. The table to have a drawer made of MDF Board with dimension of 400 mm Width x 450 mm Depth x 150 mm Height. The Drawer will move on Single/Double Extension Ball Slide. The Drawer will also have a provision of Locking. The Table will have Leveller at bottom for adjusting for minor undulation of the floor, and also to prevent scratches on floor/ product.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
66
-
-
... More
Pinup Board Providing and fixing in position at required location Alfa Pin up Board Size 900mm x 1200 mm - Display Surface Acrylic Velvet Fabric in (Blue,Green Maroon Colours)} with following specification. Core material Premium Quality Soft Board 12mm thickness to make the Board Warp-free and 100% Flat. Backer sheet 0.82mm. thick laminated sheet with extra melamine surface mix colour. Frame Spec’s - Core : 15 mm. Section Size : 23 H x 18.5 W. Wall thickness : 1.1 mm ( ±0.1). We will Provide Powder Coating in Frames.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
White Board Providing and fixing in position at required location white Board of size 900 mmx 1200mm with viCreous enamel steel sheet made of 0.3mm to 0.40mm thick steel sheet with “Ceramic steel” (having vitreous enamelled coating both sides), 0.095mm thick top surface coating and back surface coating thickness of 0.03mm supported with 9mm thick MDF Board back support and backing with 0.25 mm thick galvanized steel sheet fixed with anodized aluminium frame 20mm wide and 1.2mm thick and board shall be given additional support at bottom with Aluminium 3-Clamps.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
Roller Blinds: Providing and fixing manually operating & with decorative of Roller blinds/vertical blinds with composition of 100% polyester with washable fabric duly fixed with powder coated aluminum channel and clamps having nylon rope for manual operation of approved colour, design and texture in required pattern, including cost of all materials and labour involved forcomplete work etc. as per drawing, specifications and as directed by
Engineer-in-charge. Make: MaC/ AD/ S3/ Talgo/ Ami
356.4
-
-
... More
ADMIN AREA
-
-
-
... More
Revolving Chair for office Staff & Teachers- C2 Providing and fixing in position at required location Specification dimension of product to be supplied H: 910- 1010mm, Seat H: 470-570mm, D:
575mm, W: 580mm: 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed plywood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Lockable center tilt mechanism and with Single piece Die castes PP arm rest. Quality tapestry.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
297
-
-
... More
Computer Workstation Table for office staff - Table Type 3 Providing and fixing in position at required location of table dimension of 900 mm L x 600mm W x 760mm H. The Worktop should be made of 25 mm thick PreLaminated MDF Board. with 2mm thick PVC edge banding with hot melt glue. Both the side panels are to be made of 25 mm thick PreLaminated MDF Board. The table should have a Modesty Panel of entire length of 900 mm, with a height of 600 mm from top, made of 18 mm thick Pre Laminated MDF Board. The table to have a drawer made of MDF Board with dimension of 400 mm Width x 450 mm Depth x 150 mm Height. The Drawer will move on Single/Double Extension Ball Slide. The Drawer will also have a provision of Locking. The Table will have Leveller at bottom for adjusting for minor undulation of the floor, and also to prevent scratches on floor/ product.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
363
-
-
... More
Table for Office staff - Table Type 2 Providing and fixing in position at required location table - Size:- Length:1200 mm, Width: 600 mm, Height 750 mm. C- Frame & Tubular cold rolled close annealed Steel Structure. Fabrication involves only MIG welding process.
Top- Size :- 1200x600x18 MM thk. Pre Laminated MDF. Side edges covered by 2 mm thick PVC Edge beading by Through Feed Machine..
Modesty- 0.8 MM Thk. CRCA sheet dotted embossed panel at visitor’s side.
Tie members- Horizontal Tie members 25x25x1.6 MM thk. CRCA Pipe. For rigid joint of frame structure threaded 4 mm thick sleeve welded in tie members.
Footrest- Footrest made of 25x50x1.25 mm Thk CRCA Pipe.
Three Storage Drawer - W-350mm, H-430mm D-575mm. with ebco make teliscopic channel for sliding of drawers. Hettich make locks use for locking.
Side frame- Side frame C - section pressed formed 1 mm thk.CRCA Sheet welded with 25x50x1.2 MM thk pipe.
Cap & Levellers- All pipe caps are curved PPCP material. 4 nos of Drum type leveller has been provided at bottom for mentaining level. It also preventing scratches on floor & Product as well.
Construction- The product comes in knock-down conditional for ease of transportation.
Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
297
-
-
... More
Visitor/ Teachers Chair Providing and fixing in position at required location size: Total Height-850mm, Depth 570mm, Width-550mm Seat Height:440mm. Under Structure cantilever type MS cold rolled close annealed Tube 1.6 mm thick. Hot pressed ply wood with steel T-Nuts for rigid fastening. Single piece integral skin PU arm rest. Quality tapestry. High density PU moulded cushion. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. Upholstery 1.5 Mtr.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
363
-
-
... More
Back Runner- Low Height Storage Providing and fixing in position at required location of Storage Size:- Width - as per requirement, Depth (in mm) 400 Height (In mm) 750
Strorage Top Made From 25 mm Thick Prelaminated MDF.
Sides, Bottom & Back Panel Made From 18mm Thick Prelaminated MDF.
Door Made From 18mm Thick Prelaminated MDF.
No of Shelf Will be 1 No All open Edge covered with 2mm/0.8 Thick Edge Band As per Design Requirement.
Unit will have groove handle.
Shutters hang on Modular Hinge.
Storage is provided with lock for security.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
231
-
-
... More
Pinup Board Providing and fixing in position at required location Alfa Pin up Board Size 900mm x 1200 mm - Display Surface Acrylic Velvet Fabric in (Blue,Green Maroon Colours)} with following specification. Core material Premium Quality Soft Board 12mm thickness to make the Board Warp-free and 100% Flat. Backer sheet 0.82mm. thick laminated sheet with extra melamine surface mix colour. Frame Spec’s - Core : 15 mm. Section Size : 23 H x 18.5 W. Wall thickness : 1.1 mm ( ±0.1). We will Provide Powder Coating in Frames.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
132
-
-
... More
Roller Blinds: Providing and fixing manually operating & with decorative of Roller blinds/vertical blinds with composition of 100% polyester with washable fabric duly fixed with powder coated aluminum channel and clamps having nylon rope for manual operation of approved colour, design and texture in required pattern, including cost of all materials and labour involved forcomplete work etc. as per drawing, specifications and as directed by
Engineer-in-charge. Make: MaC/ AD/ S3/ Talgo/ Ami
297
-
-
... More
PRIMARY HM ROOM
-
-
-
... More
Large Table with lockable storage for Principal - Table Type-1 Providing and fixing Table Size:- Length:2100mm, Width: 900mm, Height: 750mm, Top made of 36 mm thick Pre-laminated MDF Board. PVC edge beading of 2 mm edges by Through Feed Machine. Provision of Cable manager on both sides of the Table. Cable duct made of 0.8 mm CRCA Sheet. Leg/Side made of 25 mm thick Pre-laminated MDF fitted with Aluminium section of size 60X40 with grooving. Leg/Side Base & Top plate with profile cut made of M.S. plate 4 mm thk with knock down fitting arrangement. Modesty panel made of 18 mm thick Prelaminated MDF Board with PVC Edge Band. Mobile Pedestal of 2 Drawer + 1 Filling unit, made of 18mm thk Prelaminated MDF Board with PVC edge banding. All drawers shall have a central lock mechanism. Handles to be made of SS. The overall dimension of the unit should be H:660xW:400xD:450 mm. The height of the drawer is inclusive of the Castors. SDU with Drawer- Size: Height:750mm, Width:900mm, Depth:450mm. Top made of 18mm thick Pre-laminated MDF Board. Side Edges covered with PVC edge band on edge bending machine. Provision of drawer below table top with telescopic channel. Drawer should be made of 0.8 mm thick MS CRCA Sheet. Superior Quality make lock. Frame assembly/Shelf/Door Assy. should be made of 0.8 mm thick MS CRCA. Use only MIG/TIG & Spot welding for fabrication. PVC handles. Doors are Top hung slide on roller bearing. Leveller plate should be made of 1.6 mm thick MS CRCA Sheet. All steel components are to be epoxy powder coated after seven tanks anti corrosion treatment of surface.
The overall construction shall be as per product drawing given. In case there is any deviation between above defined specification & drawing, the above specification shall prevail. All dimensions can have +/-5 mm tolerance. Raw Material thickness can have +/-2% tolerance.
66
-
-
... More
Large revolving Chair for principal Providing and fixing in position at required location dimension of product to be supplied are Overall Size - Max/Min. Height-1230/1150mm, Width-700mm, Depth - 750mm, Seat Height-580/500mm, Seat Size-W-535mm x D-500mm, Back Size-H-740mm x W-535mm. 5-Prong nylon base for stability of 700 mm Dia (including Castors in open condition). Chair to be fitted with twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed plywood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS coverover steel column. Lockable center tilt mechanism and with Single piece die castes Nylon arm rest with Cushion. Premiun Quality Leatherette with minimum 500 GSM, with single and double stitch. Lethearite to be used are with perforations for the touch areas of seat & back. Foam Thickness: 50 mm thick with Foam density to be 32 - 45 KG/m3. The overall construction shall be as per product drawing given. In case there is any deviation between above defined specification & drawing, the above specification shall prevail. All dimensions can have +/-5 mm tolerance. Raw Material thickness can have +/-2% tolerance. The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
Visitor/ Teachers Chair Providing and fixing in position at required location size: Total Height-850mm, Depth 570mm, Width-550mm Seat Height:440mm. Under Structure cantilever type MS cold rolled close annealed Tube 1.6 mm thick. Hot pressed ply wood with steel T-Nuts for rigid fastening. Single piece integral skin PU arm rest. Quality tapestry. High density PU moulded cushion. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. Upholstery 1.5 Mtr.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
198
-
-
... More
Back Runner- Low Height Storage Providing and fixing in position at required location of Storage Size:- Width - as per requirement, Depth (in mm) 400 Height (In mm) 750
Strorage Top Made From 25 mm Thick Prelaminated MDF.
Sides, Bottom & Back Panel Made From 18mm Thick Prelaminated MDF.
Door Made From 18mm Thick Prelaminated MDF.
No of Shelf Will be 1 No All open Edge covered with 2mm/0.8 Thick Edge Band As per Design Requirement.
Unit will have groove handle.
Shutters hang on Modular Hinge.
Storage is provided with lock for security.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
138.6
-
-
... More
Roller Blinds: Providing and fixing manually operating & with decorative of Roller blinds/vertical blinds with composition of 100% polyester with washable fabric duly fixed with powder coated aluminum channel and clamps having nylon rope for manual operation of approved colour, design and texture in required pattern, including cost of all materials and labour involved forcomplete work etc. as per drawing, specifications and as directed by
Engineer-in-charge. Make: MaC/ AD/ S3/ Talgo/ Ami
356.4
-
-
... More
Side Table Providing and fixing in position at required location dimension of table should be,
600 x 600 x 450 mm. Top made of 18 mm thick Prelaminated MDF board with edge effect of 30 mm thick With 10 mm thick Glass. Under structure made of 25x25x1.6 mm thick CRCA Square Tube. All steel components are to be epoxy powder coated after seven tanks anti corrosion treatment of surface.
The product should be as per approved drawing from Engineer-In-Charge/Architect
66
-
-
... More
Pinup Board Providing and fixing in position at required location Alfa Pin up Board Size 900mm x 1200 mm - Display Surface Acrylic Velvet Fabric in (Blue,Green Maroon Colours)} with following specification. Core material Premium Quality Soft Board 12mm thickness to make the Board Warp-free and 100% Flat. Backer sheet 0.82mm. thick laminated sheet with extra melamine surface mix colour. Frame Spec’s - Core : 15 mm. Section Size : 23 H x 18.5 W. Wall thickness : 1.1 mm ( ±0.1). We will Provide Powder Coating in Frames.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
MIDDLE H.M. ROOM
-
-
-
... More
Large Table with lockable storage for Principal - Table Type-1 Providing and fixing Table Size:- Length:2100mm, Width: 900mm, Height: 750mm, Top made of 36 mm thick Pre-laminated MDF Board. PVC edge beading of 2 mm edges by Through Feed Machine. Provision of Cable manager on both sides of the Table. Cable duct made of 0.8 mm CRCA Sheet. Leg/Side made of 25 mm thick Pre-laminated MDF fitted with Aluminium section of size 60X40 with grooving. Leg/Side Base & Top plate with profile cut made of M.S. plate 4 mm thk with knock down fitting arrangement. Modesty panel made of 18 mm thick Prelaminated MDF Board with PVC Edge Band. Mobile Pedestal of 2 Drawer + 1 Filling unit, made of 18mm thk Prelaminated MDF Board with PVC edge banding. All drawers shall have a central lock mechanism. Handles to be made of SS. The overall dimension of the unit should be H:660xW:400xD:450 mm. The height of the drawer is inclusive of the Castors. SDU with Drawer- Size: Height:750mm, Width:900mm, Depth:450mm. Top made of 18mm thick Pre-laminated MDF Board. Side Edges covered with PVC edge band on edge bending machine. Provision of drawer below table top with telescopic channel. Drawer should be made of 0.8 mm thick MS CRCA Sheet. Superior Quality make lock. Frame assembly/Shelf/Door Assy. should be made of 0.8 mm thick MS CRCA. Use only MIG/TIG & Spot welding for fabrication. PVC handles. Doors are Top hung slide on roller bearing. Leveller plate should be made of 1.6 mm thick MS CRCA Sheet. All steel components are to be epoxy powder coated after seven tanks anti corrosion treatment of surface.
The overall construction shall be as per product drawing given. In case there is any deviation between above defined specification & drawing, the above specification shall prevail. All dimensions can have +/-5 mm tolerance. Raw Material thickness can have +/-2% tolerance.
66
-
-
... More
Large revolving Chair for principal Providing and fixing in position at required location dimension of product to be supplied are Overall Size - Max/Min. Height-1230/1150mm, Width-700mm, Depth - 750mm, Seat Height-580/500mm, Seat Size-W-535mm x D-500mm, Back Size-H-740mm x W-535mm. 5-Prong nylon base for stability of 700 mm Dia (including Castors in open condition). Chair to be fitted with twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed plywood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS coverover steel column. Lockable center tilt mechanism and with Single piece die castes Nylon arm rest with Cushion. Premiun Quality Leatherette with minimum 500 GSM, with single and double stitch. Lethearite to be used are with perforations for the touch areas of seat & back. Foam Thickness: 50 mm thick with Foam density to be 32 - 45 KG/m3. The overall construction shall be as per product drawing given. In case there is any deviation between above defined specification & drawing, the above specification shall prevail. All dimensions can have +/-5 mm tolerance. Raw Material thickness can have +/-2% tolerance. The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
Visitor/ Teachers Chair Providing and fixing in position at required location size: Total Height-850mm, Depth 570mm, Width-550mm Seat Height:440mm. Under Structure cantilever type MS cold rolled close annealed Tube 1.6 mm thick. Hot pressed ply wood with steel T-Nuts for rigid fastening. Single piece integral skin PU arm rest. Quality tapestry. High density PU moulded cushion. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. Upholstery 1.5 Mtr.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
198
-
-
... More
Back Runner- Low Height Storage Providing and fixing in position at required location of Storage Size:- Width - as per requirement, Depth (in mm) 400 Height (In mm) 750
Strorage Top Made From 25 mm Thick Prelaminated MDF.
Sides, Bottom & Back Panel Made From 18mm Thick Prelaminated MDF.
Door Made From 18mm Thick Prelaminated MDF.
No of Shelf Will be 1 No All open Edge covered with 2mm/0.8 Thick Edge Band As per Design Requirement.
Unit will have groove handle.
Shutters hang on Modular Hinge.
Storage is provided with lock for security.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
138.6
-
-
... More
Roller Blinds: Providing and fixing manually operating & with decorative of Roller blinds/vertical blinds with composition of 100% polyester with washable fabric duly fixed with powder coated aluminum channel and clamps having nylon rope for manual operation of approved colour, design and texture in required pattern, including cost of all materials and labour involved forcomplete work etc. as per drawing, specifications and as directed by
Engineer-in-charge. Make: MaC/ AD/ S3/ Talgo/ Ami
356.4
-
-
... More
Side Table Providing and fixing in position at required location dimension of table should be,
600 x 600 x 450 mm. Top made of 18 mm thick Prelaminated MDF board with edge effect of 30 mm thick With 10 mm thick Glass. Under structure made of 25x25x1.6 mm thick CRCA Square Tube. All steel components are to be epoxy powder coated after seven tanks anti corrosion treatment of surface.
The product should be as per approved drawing from Engineer-In-Charge/Architect
66
-
-
... More
Pinup Board Providing and fixing in position at required location Alfa Pin up Board Size 900mm x 1200 mm - Display Surface Acrylic Velvet Fabric in (Blue,Green Maroon Colours)} with following specification. Core material Premium Quality Soft Board 12mm thickness to make the Board Warp-free and 100% Flat. Backer sheet 0.82mm. thick laminated sheet with extra melamine surface mix colour. Frame Spec’s - Core : 15 mm. Section Size : 23 H x 18.5 W. Wall thickness : 1.1 mm ( ±0.1). We will Provide Powder Coating in Frames.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
STAFF ROOM 01
-
-
-
... More
Computer Workstation Table for office staff - Table Type 3 Providing and fixing in position at required location of table dimension of 900 mm L x 600mm W x 760mm H. The Worktop should be made of 25 mm thick PreLaminated MDF Board. with 2mm thick PVC edge banding with hot melt glue. Both the side panels are to be made of 25 mm thick PreLaminated MDF Board. The table should have a Modesty Panel of entire length of 900 mm, with a height of 600 mm from top, made of 18 mm thick Pre Laminated MDF Board. The table to have a drawer made of MDF Board with dimension of 400 mm Width x 450 mm Depth x 150 mm Height. The Drawer will move on Single/Double Extension Ball Slide. The Drawer will also have a provision of Locking. The Table will have Leveller at bottom for adjusting for minor undulation of the floor, and also to prevent scratches on floor/ product.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
449
-
-
... More
Table for Staff Teacher - Table Type 4 Providing and fixing in position at required location - Office Table of size Length:1200mm, Width: 750mm, Height 750mm. C– Frame Leg 200mm wide made of aluminium profile and cold rolled close annealed formed sections, having provision for wire management. Fabrication involves only MIG welding process.
Top- Size :- 1200x600x25 MM thk. Pre Laminated MDF Board. Side edges covered by 2 mm thick PVC Edge beading by Through Feed Machine.
Modesty- 0.8 MM Thk. CRCA sheet Perforated panel at visitor’s side.
Duct- Dotted embossed cable Duct of size 1058x150x0.8 MM thk, below the Worktop. CRCA sheet for wire management purpose.
Side frame- C– Frame Leg 200mm wide made of aluminium profile and cold rolled close annealed formed sections, having provision for wire management. Levellers- 4 nos of flat type leveller has been provided at bottom for mentaining level. It also preventing scratches on floor & Product as well.
Construction- The product comes in knock-down conditional for ease of transportation.
Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. The product should be as per approved drawing from Engineer-In-Charge/Architect.
152
-
-
... More
Revolving Chair for office Staff & Teachers- C2 Providing and fixing in position at required location Specification dimension of product to be supplied H: 910- 1010mm, Seat H: 470-570mm, D:
575mm, W: 580mm: 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed plywood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Lockable center tilt mechanism and with Single piece Die castes PP arm rest. Quality tapestry.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
152
-
-
... More
Visitor/ Teachers Chair Providing and fixing in position at required location size: Total Height-850mm, Depth 570mm, Width-550mm Seat Height:440mm. Under Structure cantilever type MS cold rolled close annealed Tube 1.6 mm thick. Hot pressed ply wood with steel T-Nuts for rigid fastening. Single piece integral skin PU arm rest. Quality tapestry. High density PU moulded cushion. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. Upholstery 1.5 Mtr.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
449
-
-
... More
Back Runner- Low Height Storage Providing and fixing in position at required location of Storage Size:- Width - as per requirement, Depth (in mm) 400 Height (In mm) 750
Strorage Top Made From 25 mm Thick Prelaminated MDF.
Sides, Bottom & Back Panel Made From 18mm Thick Prelaminated MDF.
Door Made From 18mm Thick Prelaminated MDF.
No of Shelf Will be 1 No All open Edge covered with 2mm/0.8 Thick Edge Band As per Design Requirement.
Unit will have groove handle.
Shutters hang on Modular Hinge.
Storage is provided with lock for security.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
231
-
-
... More
Roller Blinds: Providing and fixing manually operating & with decorative of Roller blinds/vertical blinds with composition of 100% polyester with washable fabric duly fixed with powder coated aluminum channel and clamps having nylon rope for manual operation of approved colour, design and texture in required pattern, including cost of all materials and labour involved forcomplete work etc. as per drawing, specifications and as directed by
Engineer-in-charge. Make: MaC/ AD/ S3/ Talgo/ Ami
392
-
-
... More
Pinup Board Providing and fixing in position at required location Alfa Pin up Board Size 900mm x 1200 mm - Display Surface Acrylic Velvet Fabric in (Blue,Green Maroon Colours)} with following specification. Core material Premium Quality Soft Board 12mm thickness to make the Board Warp-free and 100% Flat. Backer sheet 0.82mm. thick laminated sheet with extra melamine surface mix colour. Frame Spec’s - Core : 15 mm. Section Size : 23 H x 18.5 W. Wall thickness : 1.1 mm ( ±0.1). We will Provide Powder Coating in Frames.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
132
-
-
... More
STAFF ROOM 02 & 03
-
-
-
... More
Computer Workstation Table for office staff - Table Type 3 Providing and fixing in position at required location of table dimension of 900 mm L x 600mm W x 760mm H. The Worktop should be made of 25 mm thick PreLaminated MDF Board. with 2mm thick PVC edge banding with hot melt glue. Both the side panels are to be made of 25 mm thick PreLaminated MDF Board. The table should have a Modesty Panel of entire length of 900 mm, with a height of 600 mm from top, made of 18 mm thick Pre Laminated MDF Board. The table to have a drawer made of MDF Board with dimension of 400 mm Width x 450 mm Depth x 150 mm Height. The Drawer will move on Single/Double Extension Ball Slide. The Drawer will also have a provision of Locking. The Table will have Leveller at bottom for adjusting for minor undulation of the floor, and also to prevent scratches on floor/ product.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
1165
-
-
... More
Table for Staff Teacher - Table Type 4 Providing and fixing in position at required location - Office Table of size Length:1200mm, Width: 750mm, Height 750mm. C– Frame Leg 200mm wide made of aluminium profile and cold rolled close annealed formed sections, having provision for wire management. Fabrication involves only MIG welding process.
Top- Size :- 1200x600x25 MM thk. Pre Laminated MDF Board. Side edges covered by 2 mm thick PVC Edge beading by Through Feed Machine.
Modesty- 0.8 MM Thk. CRCA sheet Perforated panel at visitor’s side.
Duct- Dotted embossed cable Duct of size 1058x150x0.8 MM thk, below the Worktop. CRCA sheet for wire management purpose.
Side frame- C– Frame Leg 200mm wide made of aluminium profile and cold rolled close annealed formed sections, having provision for wire management. Levellers- 4 nos of flat type leveller has been provided at bottom for mentaining level. It also preventing scratches on floor & Product as well.
Construction- The product comes in knock-down conditional for ease of transportation.
Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. The product should be as per approved drawing from Engineer-In-Charge/Architect.
296
-
-
... More
Revolving Chair for office Staff & Teachers- C2 Providing and fixing in position at required location Specification dimension of product to be supplied H: 910- 1010mm, Seat H: 470-570mm, D:
575mm, W: 580mm: 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed plywood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Lockable center tilt mechanism and with Single piece Die castes PP arm rest. Quality tapestry.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
296
-
-
... More
Visitor/ Teachers Chair Providing and fixing in position at required location size: Total Height-850mm, Depth 570mm, Width-550mm Seat Height:440mm. Under Structure cantilever type MS cold rolled close annealed Tube 1.6 mm thick. Hot pressed ply wood with steel T-Nuts for rigid fastening. Single piece integral skin PU arm rest. Quality tapestry. High density PU moulded cushion. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. Upholstery 1.5 Mtr.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
1165
-
-
... More
Back Runner- Low Height Storage Providing and fixing in position at required location of Storage Size:- Width - as per requirement, Depth (in mm) 400 Height (In mm) 750
Strorage Top Made From 25 mm Thick Prelaminated MDF.
Sides, Bottom & Back Panel Made From 18mm Thick Prelaminated MDF.
Door Made From 18mm Thick Prelaminated MDF.
No of Shelf Will be 1 No All open Edge covered with 2mm/0.8 Thick Edge Band As per Design Requirement.
Unit will have groove handle.
Shutters hang on Modular Hinge.
Storage is provided with lock for security.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
429
-
-
... More
Roller Blinds: Providing and fixing manually operating & with decorative of Roller blinds/vertical blinds with composition of 100% polyester with washable fabric duly fixed with powder coated aluminum channel and clamps having nylon rope for manual operation of approved colour, design and texture in required pattern, including cost of all materials and labour involved forcomplete work etc. as per drawing, specifications and as directed by
Engineer-in-charge. Make: MaC/ AD/ S3/ Talgo/ Ami
230
-
-
... More
Pinup Board Providing and fixing in position at required location Alfa Pin up Board Size 900mm x 1200 mm - Display Surface Acrylic Velvet Fabric in (Blue,Green Maroon Colours)} with following specification. Core material Premium Quality Soft Board 12mm thickness to make the Board Warp-free and 100% Flat. Backer sheet 0.82mm. thick laminated sheet with extra melamine surface mix colour. Frame Spec’s - Core : 15 mm. Section Size : 23 H x 18.5 W. Wall thickness : 1.1 mm ( ±0.1). We will Provide Powder Coating in Frames.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
164
-
-
... More
RECEPTION LOBBY
-
-
-
... More
Revolving Chair for office Staff & Teachers- C2 Providing and fixing in position at required location Specification dimension of product to be supplied H: 910- 1010mm, Seat H: 470-570mm, D:
575mm, W: 580mm: 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed plywood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Lockable center tilt mechanism and with Single piece Die castes PP arm rest. Quality tapestry.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
132
-
-
... More
Reception Desk: Providing and fixing in position at required location table Size:- Length:1800mm, Depth: 706mm, Height: 1200mm. Top Height- 760mm. Top made of 25 mm thick Pre-laminated MDF Board. PVC edge beading of 2 mm edges by Through Feed Machine. Leg/Side & Modesty made of 18 mm thick MDF. Highted Top of 600 mm Width, with overall extension depth of 300 mm, as shown in drawing, made of 6 mm thick Flexible Ply & 18 mm thick MDF. Mobile Pedestal of 2 Drawer + 1 Filling unit, made of 18mm thk Prelaminated MDF Board with PVC edge banding. All drawers shall have a central lock mechanism. Handles to be made of SS. The overall dimension of the unit should be H:660xW:400xD:450 mm. The height of the drawer is inclusive of the Castors. The overall construction shall be as per product drawing given. In case there is any deviation between above defined specification & drawing, the above specification shall prevail. All dimensions can have +/-5 mm tolerance. Raw Material thickness can have +/-2% tolerance.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
132
-
-
... More
Visitor/ Teachers Chair Providing and fixing in position at required location size: Total Height-850mm, Depth 570mm, Width-550mm Seat Height:440mm. Under Structure cantilever type MS cold rolled close annealed Tube 1.6 mm thick. Hot pressed ply wood with steel T-Nuts for rigid fastening. Single piece integral skin PU arm rest. Quality tapestry. High density PU moulded cushion. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. Upholstery 1.5 Mtr.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
792
-
-
... More
Back Runner- Low Height Storage Providing and fixing in position at required location of Storage Size:- Width - as per requirement, Depth (in mm) 400 Height (In mm) 750
Strorage Top Made From 25 mm Thick Prelaminated MDF.
Sides, Bottom & Back Panel Made From 18mm Thick Prelaminated MDF.
Door Made From 18mm Thick Prelaminated MDF.
No of Shelf Will be 1 No All open Edge covered with 2mm/0.8 Thick Edge Band As per Design Requirement.
Unit will have groove handle.
Shutters hang on Modular Hinge.
Storage is provided with lock for security.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
264
-
-
... More
Pinup Board Providing and fixing in position at required location Alfa Pin up Board Size 900mm x 1200 mm - Display Surface Acrylic Velvet Fabric in (Blue,Green Maroon Colours)} with following specification. Core material Premium Quality Soft Board 12mm thickness to make the Board Warp-free and 100% Flat. Backer sheet 0.82mm. thick laminated sheet with extra melamine surface mix colour. Frame Spec’s - Core : 15 mm. Section Size : 23 H x 18.5 W. Wall thickness : 1.1 mm ( ±0.1). We will Provide Powder Coating in Frames.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
264
-
-
... More
SOFT BOARD ON CORRIDOR
-
-
-
... More
Pinup Board Providing and fixing in position at required location Alfa Pin up Board Size 900mm x 1200 mm - Display Surface Acrylic Velvet Fabric in (Blue,Green Maroon Colours)} with following specification. Core material Premium Quality Soft Board 12mm thickness to make the Board Warp-free and 100% Flat. Backer sheet 0.82mm. thick laminated sheet with extra melamine surface mix colour. Frame Spec’s - Core : 15 mm. Section Size : 23 H x 18.5 W. Wall thickness : 1.1 mm ( ±0.1). We will Provide Powder Coating in Frames.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
1480
-
-
... More
WALL PAPER
-
-
-
... More
Customize design Theme Based wallpaper for KG Class & Reception Providing and fixing decorative wallpaper to the walls in position with adhesive & wallpaper shall be of approved make & design , colour, pattern, as per direction of Engineer-In-Charge including all material, labour, fixing and installation.
The product should be as per approved drawing from Engineer-In-Charge/Architect. MPPWD SOR 2024 13.105
1820
-
-
... More
DANCE ROOM
-
-
-
... More
Table for Office staff - Table Type 2 Providing and fixing in position at required location table - Size:- Length:1200 mm, Width: 600 mm, Height 750 mm. C- Frame & Tubular cold rolled close annealed Steel Structure. Fabrication involves only MIG welding process.
Top- Size :- 1200x600x18 MM thk. Pre Laminated MDF. Side edges covered by 2 mm thick PVC Edge beading by Through Feed Machine..
Modesty- 0.8 MM Thk. CRCA sheet dotted embossed panel at visitor’s side.
Tie members- Horizontal Tie members 25x25x1.6 MM thk. CRCA Pipe. For rigid joint of frame structure threaded 4 mm thick sleeve welded in tie members.
Footrest- Footrest made of 25x50x1.25 mm Thk CRCA Pipe.
Three Storage Drawer - W-350mm, H-430mm D-575mm. with ebco make teliscopic channel for sliding of drawers. Hettich make locks use for locking.
Side frame- Side frame C - section pressed formed 1 mm thk.CRCA Sheet welded with 25x50x1.2 MM thk pipe.
Cap & Levellers- All pipe caps are curved PPCP material. 4 nos of Drum type leveller has been provided at bottom for mentaining level. It also preventing scratches on floor & Product as well.
Construction- The product comes in knock-down conditional for ease of transportation.
Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
Revolving Chair for office Staff & Teachers- C2 Providing and fixing in position at required location Specification dimension of product to be supplied H: 910- 1010mm, Seat H: 470-570mm, D:
575mm, W: 580mm: 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed plywood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Lockable center tilt mechanism and with Single piece Die castes PP arm rest. Quality tapestry.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
Back Runner- Low Height Storage Providing and fixing in position at required location of Storage Size:- Width - as per requirement, Depth (in mm) 400 Height (In mm) 750
Strorage Top Made From 25 mm Thick Prelaminated MDF.
Sides, Bottom & Back Panel Made From 18mm Thick Prelaminated MDF.
Door Made From 18mm Thick Prelaminated MDF.
No of Shelf Will be 1 No All open Edge covered with 2mm/0.8 Thick Edge Band As per Design Requirement.
Unit will have groove handle.
Shutters hang on Modular Hinge.
Storage is provided with lock for security.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
132
-
-
... More
Roller Blinds: Providing and fixing manually operating & with decorative of Roller blinds/vertical blinds with composition of 100% polyester with washable fabric duly fixed with powder coated aluminum channel and clamps having nylon rope for manual operation of approved colour, design and texture in required pattern, including cost of all materials and labour involved forcomplete work etc. as per drawing, specifications and as directed by
Engineer-in-charge. Make: MaC/ AD/ S3/ Talgo/ Ami
712.8
-
-
... More
Full Mirror for Dance room
Providing and fixing dance room bevelled edge mirror of superior glass (of approved quality) 6 mm mirror with 12 mm thick plywood with ground fixed to wooden cleats with C.P. brass screws and washers complete.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
2640
-
-
... More
MUSIC ROOM
-
-
-
... More
Table for Office staff - Table Type 2 Providing and fixing in position at required location table - Size:- Length:1200 mm, Width: 600 mm, Height 750 mm. C- Frame & Tubular cold rolled close annealed Steel Structure. Fabrication involves only MIG welding process.
Top- Size :- 1200x600x18 MM thk. Pre Laminated MDF. Side edges covered by 2 mm thick PVC Edge beading by Through Feed Machine..
Modesty- 0.8 MM Thk. CRCA sheet dotted embossed panel at visitor’s side.
Tie members- Horizontal Tie members 25x25x1.6 MM thk. CRCA Pipe. For rigid joint of frame structure threaded 4 mm thick sleeve welded in tie members.
Footrest- Footrest made of 25x50x1.25 mm Thk CRCA Pipe.
Three Storage Drawer - W-350mm, H-430mm D-575mm. with ebco make teliscopic channel for sliding of drawers. Hettich make locks use for locking.
Side frame- Side frame C - section pressed formed 1 mm thk.CRCA Sheet welded with 25x50x1.2 MM thk pipe.
Cap & Levellers- All pipe caps are curved PPCP material. 4 nos of Drum type leveller has been provided at bottom for mentaining level. It also preventing scratches on floor & Product as well.
Construction- The product comes in knock-down conditional for ease of transportation.
Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
Revolving Chair for office Staff & Teachers- C2 Providing and fixing in position at required location Specification dimension of product to be supplied H: 910- 1010mm, Seat H: 470-570mm, D:
575mm, W: 580mm: 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed plywood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Lockable center tilt mechanism and with Single piece Die castes PP arm rest. Quality tapestry.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
Back Runner- Low Height Storage Providing and fixing in position at required location of Storage Size:- Width - as per requirement, Depth (in mm) 400 Height (In mm) 750
Strorage Top Made From 25 mm Thick Prelaminated MDF.
Sides, Bottom & Back Panel Made From 18mm Thick Prelaminated MDF.
Door Made From 18mm Thick Prelaminated MDF.
No of Shelf Will be 1 No All open Edge covered with 2mm/0.8 Thick Edge Band As per Design Requirement.
Unit will have groove handle.
Shutters hang on Modular Hinge.
Storage is provided with lock for security.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
132
-
-
... More
Lockable Storage for Music Room Storage Providing and fixing in position at required location Dimension 1500 mm H x 7200 mm W x 600 mm D. The product consists of 4 separate units of 1500 mm H x 1800 mm Wx 600 mm H, each designed in such a way to store separate musical instruments, as shown in the drawing. The structure will be made of 25 mm Thick Pre Laminated MDF. All Verticals and inside shelves are also made of 25 mm thick PreLaminated MDF. Door made of 18 mm thick MDF with Piano pettern outside, as shown in the drawing. Side edges covered with 2 mm thick PVC Edge band on edge banding machine. Superior quality make lock on each unit. The overall construction shall be as per product drawing given. In case there is any deviation between above defined specification & drawing, the above specification shall prevail. All dimensions can have +/-5 mm tolerance. Raw Material thickness can have +/-2% tolerance.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
198
-
-
... More
Roller Blinds: Providing and fixing manually operating & with decorative of Roller blinds/vertical blinds with composition of 100% polyester with washable fabric duly fixed with powder coated aluminum channel and clamps having nylon rope for manual operation of approved colour, design and texture in required pattern, including cost of all materials and labour involved forcomplete work etc. as per drawing, specifications and as directed by
Engineer-in-charge. Make: MaC/ AD/ S3/ Talgo/ Ami
396
-
-
... More
LIBRARY SENIOR
-
-
-
... More
Library Table Providing and fixing Dimension of the product should be 1350X900x750 mm Ht. Top to be made up of 25 mm thick prelaminated MDF board. All four corners of the top should be rounded for safety of students. Edges should be covered with PVC edge band on edge bending machine. Understructure of the table to be made of inclined Leg design of Size: - 725 mm Ht. with Leveler.
The Leg Assembly consists of two Conical Construction leg, made of Sheet Metal, which are welded to the Leg Frame. The Tapered Leg is made of 7-bend V-type channel made of CRCA 1.6 mm thick, with Top dimension of 74 x 62 mm, and bottom dimension of 44 x 38 mm. The Leg is covered with 2 mm thick Aluminium panel with perforations. The leg will have a 38 mm dia Leveller made of PVC, with M8 tapping, with Height adjustability of 15 mm. The leg is welded to a 40 x 40 mm CRCA square tube of 1.6 mm thickness. For Additional Top support, CRCA traiangular plate of 3 mm thick is used. Cross members are made of 40 x 40 mm Sqaure Tube of 1.6 mm thickness. The Cros members are connected to the Leg Assembly with the help of Aluminium Die-cast Connectors. All steel components are to be epoxy powder coated after seven tanks anti corrosion treatment of surface.
The overall construction shall be as per product drawing given. In case there is any deviation between above defined specification & drawing, the above specification shall prevail. All dimensions can have +/-5 mm tolerance. Raw Material thickness can have +/-2% tolerance. The product should be as per approved drawing from Engineer-In-Charge/Architect.
Note : Considered for 4 Students
460
-
-
... More
Computer Workstation Table for office staff - Table Type 3 Providing and fixing in position at required location of table dimension of 900 mm L x 600mm W x 760mm H. The Worktop should be made of 25 mm thick PreLaminated MDF Board. with 2mm thick PVC edge banding with hot melt glue. Both the side panels are to be made of 25 mm thick PreLaminated MDF Board. The table should have a Modesty Panel of entire length of 900 mm, with a height of 600 mm from top, made of 18 mm thick Pre Laminated MDF Board. The table to have a drawer made of MDF Board with dimension of 400 mm Width x 450 mm Depth x 150 mm Height. The Drawer will move on Single/Double Extension Ball Slide. The Drawer will also have a provision of Locking. The Table will have Leveller at bottom for adjusting for minor undulation of the floor, and also to prevent scratches on floor/ product.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
132
-
-
... More
Table for Office staff - Table Type 2 Providing and fixing in position at required location table - Size:- Length:1200 mm, Width: 600 mm, Height 750 mm. C- Frame & Tubular cold rolled close annealed Steel Structure. Fabrication involves only MIG welding process.
Top- Size :- 1200x600x18 MM thk. Pre Laminated MDF. Side edges covered by 2 mm thick PVC Edge beading by Through Feed Machine..
Modesty- 0.8 MM Thk. CRCA sheet dotted embossed panel at visitor’s side.
Tie members- Horizontal Tie members 25x25x1.6 MM thk. CRCA Pipe. For rigid joint of frame structure threaded 4 mm thick sleeve welded in tie members.
Footrest- Footrest made of 25x50x1.25 mm Thk CRCA Pipe.
Three Storage Drawer - W-350mm, H-430mm D-575mm. with ebco make teliscopic channel for sliding of drawers. Hettich make locks use for locking.
Side frame- Side frame C - section pressed formed 1 mm thk.CRCA Sheet welded with 25x50x1.2 MM thk pipe.
Cap & Levellers- All pipe caps are curved PPCP material. 4 nos of Drum type leveller has been provided at bottom for mentaining level. It also preventing scratches on floor & Product as well.
Construction- The product comes in knock-down conditional for ease of transportation.
Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
Revolving Chair for office Staff & Teachers- C2 Providing and fixing in position at required location Specification dimension of product to be supplied H: 910- 1010mm, Seat H: 470-570mm, D:
575mm, W: 580mm: 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed plywood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Lockable center tilt mechanism and with Single piece Die castes PP arm rest. Quality tapestry.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
Library Desk Chair Providing and fixing in position at required location dimension of product to be supplied are Total Height-885 mm, Width 580 mm , Depth- 540 mm, Seat Height- 460 mm. Seat Depth- 410 mm. Handle Ht. 665 mm. Under structure to be made of MS cold rolled close annealed oval tube of 19mm dia x1.6 mm thick. Seat support frame made of Ø19x1 mm thick MS Tube. Seat & Back should be made of U foam, Seat & Back should be covered with injection molded PP Cover. Seat & back should be upholsterd with prime quality tapestry GSM MIN-300. Handle should be covered with PU Material. All steel components are to be epoxy powder coated after seven tanks anti corrosion treatment of surface.
The overall construction shall be as per product drawing given. In case there is any deviation between above defined specification & drawing, the above specification shall prevail. All dimensions can have +/-5 mm tolerance. Raw Material thickness can have +/-2% tolerance. The product should be as per approved drawing from Engineer-In-Charge/Architect..
2760
-
-
... More
Computer Lab Chair for Class 6-12 Students Providing and fixing in position at required location of chair dimension of product to be supplied H: 910- 1010mm, Seat H: 470-570mm, D:575mm, W: 580mm: 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed plywood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Lockable center tilt mechanism and with Single piece Die castes PP arm rest. Quality tapestry.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
132
-
-
... More
Lockable Storage for Library books. Providing and fixing in position at required location bookcase with 4 Doors. The item to be provided with Height:1750mm, Width:920mm, Depth:330mm (4-Door). Material has to be of Prime quality CRCA sheet 0.8mm thick. Compartment door: Each compartment shall provide to-hung glass door, which swings, open upwards and slides into the casing when fully open by means of rollers. The overall size of glass 3mm thickness shall be such, that all the books in compartment shall be visible. for proper alignment of glass door cross plate (Patti) arrangement i.e., scissor system is to be fitted in each door. Construction: All the components are neat and clean with strong joints. Lock & Handles: Two Nos. good quality handles are provided on each door with precision lock. Key shall be common for all compartment lock. Finish: The bookcase shall be powder coated after seven tanks pre treatment. Qty. 11.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
264
-
-
... More
Open Storage for Library books. Racking Main Both Side - Providing and fixing of library Book rack with Overall Dimensions shall be 900mm(W)x535mm(D)x2180mm(H).Rigid Knockdown construction .
Side panels : 25 mm thick pre laminated particle board (PLB) with laminate on both sides. Provision for acrylic pouches.Stack ability shall have add-on units width wise to form a bank of racks having common side panel.
Bottom plus five fixed racks on both side making total 12 storage levels. Shelf made of 1 mm thick CRCA Sheet. Each Shelf is provided with stiffener at bottom for strength.
Uniformly distributed load capacity per each full shelf is 80 Kg. maximum.
Middle panel made of 18 mm thick PLPB. These are to support books on the rear side.
Cap & Levellers- 4 nos of flat type leveller has been provided at bottom for mentaining level. It also preventing scratches on floor & Product as well.
Construction- The product comes in knock-down conditional for ease of transportation.
Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. Racking Adon Both Side - Providing and fixing of library Book rack with Overall Dimensions shall be 900mm(W)x535mm(D)x2180mm(H).Rigid Knockdown construction .
Side panels : 25 mm thick pre laminated particle board (PLB) with laminate on both sides. Provision for acrylic pouches.Stack ability shall have add-on units width wise to form a bank of racks having common side panel.
Bottom plus five fixed racks on both side making total 12 storage levels. Shelf made of 1 mm thick CRCA Sheet. Each Shelf is provided with stiffener at bottom for strength.
Uniformly distributed load capacity per each full shelf is 80 Kg. maximum.
Middle panel made of 18 mm thick PLPB. These are to support books on the rear side.
Cap & Levellers- 4 nos of flat type leveller has been provided at bottom for mentaining level. It also preventing scratches on floor & Product as well.
Construction- The product comes in knock-down conditional for ease of transportation.
Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. Note - Price to be quoted for single body however it has to be supplied in desired configration as per instruction of Engineer incharge/Architect
660
-
-
... More
Library Counter: Providing and fixing table Size:- Length:1800mm, Depth: 706mm, Height: 1200mm. Top Height- 760mm. Top made of 25 mm thick Pre-laminated MDF Board. PVC edge beading of 2 mm edges by Through Feed Machine. Leg/Side & Modesty made of 18 mm thick MDF. Highted Top of 600 mm Width, with overall extension depth of 300 mm, as shown in drawing, made of 6 mm thick Flexible Ply & 18 mm thick MDF. Mobile Pedestal of 2 Drawer + 1 Filling unit, made of 18mm thk Prelaminated MDF Board with PVC edge banding. All drawers shall have a central lock mechanism. Handles to be made of SS. The overall dimension of the unit should be H:660xW:400xD:450 mm. The height of the drawer is inclusive of the Castors. The overall construction shall be as per product drawing given. In case there is any deviation between above defined specification & drawing, the above specification shall prevail. All dimensions can have +/-5 mm tolerance. Raw Material thickness can have +/-2% tolerance.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
132
-
-
... More
Back Runner- Low Height Storage Providing and fixing in position at required location of Storage Size:- Width - as per requirement, Depth (in mm) 400 Height (In mm) 750
Strorage Top Made From 25 mm Thick Prelaminated MDF.
Sides, Bottom & Back Panel Made From 18mm Thick Prelaminated MDF.
Door Made From 18mm Thick Prelaminated MDF.
No of Shelf Will be 1 No All open Edge covered with 2mm/0.8 Thick Edge Band As per Design Requirement.
Unit will have groove handle.
Shutters hang on Modular Hinge.
Storage is provided with lock for security.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
264
-
-
... More
Roller Blinds: Providing and fixing manually operating & with decorative of Roller blinds/vertical blinds with composition of 100% polyester with washable fabric duly fixed with powder coated aluminum channel and clamps having nylon rope for manual operation of approved colour, design and texture in required pattern, including cost of all materials and labour involved forcomplete work etc. as per drawing, specifications and as directed by
Engineer-in-charge. Make: MaC/ AD/ S3/ Talgo/ Ami
264
-
-
... More
Pinup Board Providing and fixing in position at required location Alfa Pin up Board Size 900mm x 1200 mm - Display Surface Acrylic Velvet Fabric in (Blue,Green Maroon Colours)} with following specification. Core material Premium Quality Soft Board 12mm thickness to make the Board Warp-free and 100% Flat. Backer sheet 0.82mm. thick laminated sheet with extra melamine surface mix colour. Frame Spec’s - Core : 15 mm. Section Size : 23 H x 18.5 W. Wall thickness : 1.1 mm ( ±0.1). We will Provide Powder Coating in Frames.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
132
-
-
... More
LIBRARY JR
-
-
-
... More
Library Table
Providing and fixing Dimension of the product should be 1350X900x670 mm Ht. Top to be made up of 25 mm thick prelaminated MDF board. All four corners of the top should be rounded for safety of students. Edges should be covered with PVC edge band on edge bending machine. Understructure of the table to be made of inclined Leg design of Size: - 645 mm Ht. with Leveler.
The Leg Assembly consists of two Conical Construction leg, made of Sheet Metal, which are welded to the Leg Frame. The Tapered Leg is made of 7-bend V-type channel made of CRCA 1.6 mm thick, with Top dimension of 74 x 62 mm, and bottom dimension of 44 x 38 mm. The Leg is covered with 2 mm thick Aluminium panel with perforations. The leg will have a 38 mm dia Leveller made of PVC, with M8 tapping, with Height adjustability of 15 mm. The leg is welded to a 40 x 40 mm CRCA square tube of 1.6 mm thickness. For Additional Top support, CRCA traiangular plate of 3 mm thick is used. Cross members are made of 40 x 40 mm Sqaure Tube of 1.6 mm thickness. The Cros members are connected to the Leg Assembly with the help of Aluminium Die-cast Connectors. All steel components are to be epoxy powder coated after seven tanks anti corrosion treatment of surface.
The overall construction shall be as per product drawing given. In case there is any deviation between above defined specification & drawing, the above specification shall prevail. All dimensions can have +/-5 mm tolerance. Raw Material thickness can have +/-2% tolerance. The product should be as per approved drawing from Engineer-In-Charge/Architect.
328
-
-
... More
Revolving Chair for office Staff & Teachers- C2 Providing and fixing in position at required location Specification dimension of product to be supplied H: 910- 1010mm, Seat H: 470-570mm, D:
575mm, W: 580mm: 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed plywood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Lockable center tilt mechanism and with Single piece Die castes PP arm rest. Quality tapestry.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
Library Desk Chair Providing and fixing in position at required location dimension of product to be supplied are Total Height- 700mm, Width 400mm, Depth-430mm,Seat Height- 400mm. Under structure made out of MS cold rolled close annealed tube19mmx1.6 mm thick. Seat one piece Glass filled PP molded shell with ergonomic seeting contoure. Steel components are epoxy powder coated followed by seven tanks anti corrosion pre-treatment of surface. The overall appearance of the product shall be as per photograph. All steel components are to be epoxy powder coated after seven tanks anti corrosion treatment of surface.
The overall construction shall be as per product drawing given. In case there is any deviation between above defined specification & drawing, the above specification shall prevail. All dimensions can have +/-5 mm tolerance. Raw Material thickness can have +/-2% tolerance. The product should be as per approved drawing from Engineer-In-Charge/Architect..
1998
-
-
... More
Library Counter: Providing and fixing table Size:- Length:1800mm, Depth: 706mm, Height: 1200mm. Top Height- 760mm. Top made of 25 mm thick Pre-laminated MDF Board. PVC edge beading of 2 mm edges by Through Feed Machine. Leg/Side & Modesty made of 18 mm thick MDF. Highted Top of 600 mm Width, with overall extension depth of 300 mm, as shown in drawing, made of 6 mm thick Flexible Ply & 18 mm thick MDF. Mobile Pedestal of 2 Drawer + 1 Filling unit, made of 18mm thk Prelaminated MDF Board with PVC edge banding. All drawers shall have a central lock mechanism. Handles to be made of SS. The overall dimension of the unit should be H:660xW:400xD:450 mm. The height of the drawer is inclusive of the Castors. The overall construction shall be as per product drawing given. In case there is any deviation between above defined specification & drawing, the above specification shall prevail. All dimensions can have +/-5 mm tolerance. Raw Material thickness can have +/-2% tolerance.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
66
-
-
... More
Round Ottoman Providing and fixing in position at required location Soft Seating Round: Diameter 450mm- Height: 450mm. Made with composite steel & plywood frame. Top & Bottom made of 12mm thick ply, Side made of 18 mm thick Ply. Metal Structure made of 20x20x1.2 mm thick CRCA Square Tube, duly powder coated, 5 nos. of Metal Tubes to be used per Soft Seating. Side edges covered with 25 mm thick cushion. Top covered with 50 mm thick cushion. Upholstered with fine quality Leatherite with high durability of minimum 300 gsm. Leg should be made of Ø50 Crome Leg.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
328
-
-
... More
Criss - Cross Ottoman Providing and fixing in position at required location of soft seating Criss Cross: Dimension: 1200mm L x 1200mm W x 450mm. Made with composite steel & plywood frame. Top & Bottom made of 12mm thick ply, Side made of 18 mm thick Ply. Metal Structure made of 20x20x1.2 mm thick CRCA Square Tube, duly powder coated, 13 nos. of Metal Tubes to be used per Soft Seating. . Leg should be made of Ø19x1.6 mm thick MS CRCA Tube. Center Leg should be made of Ø60x1.6 mm thick MS CRCA Tube. Leg Mtg Plate made of 3 mm thick MS CRCA Sheet. Side edges covered with 25 mm thick cushion. Top covered with 50 mm thick cushion. Upholstered with fine quality Leatherite with high durability of minimum 300 gsm.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
164
-
-
... More
Hexagon Ottoman Providing and fixing - Size - 600mm L x 520mm D x 450mm H
• Ottoman made up of 6 mm thick ply under structure. • Further Covered with non water absorbent, High Density Foam of density = 50 • Covered with removable commercial grade Vinyl fabric , Vinyl is loved for its waterproof quality that is easily wiped clean. • Water Repellent Fabric. • Color fastness to lighting - 4 to 5 • Easy to Clean • Button feet Glides for easy movement. 50mm dia 25mm H made up of NYLON , a tough, lightweight, elastic synthetic polymer.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
460
-
-
... More
Book Rack Designer Theme Based For Libraray/Kindergarden classroom
Providing and fixing in position at required location of Storage Size:- Overall Dimension of the product should be 2108X400x900 mm Ht. Storage must have 1 pigeon hole per student, corresponding to 25 students per classroom. Each hole depth to be min. W400x380 Dx146 mm Ht. Complete structure should be made of 18 mm thick MDF. Edges should be covered with 2 mm thick PVC edge band on edge bending machine. Bottom Frame/ Skirting of 50 mm Height, to be made of 18 mm thick Pre-laminated MDF. Edges should be covered with 2mm thick PVC edge band on edge bending machine. The overall construction shall be as per product drawing given. In case there is any deviation between above defined specification & drawing, the above specification shall prevail. All dimensions can have +/-5 mm tolerance. Raw Material thickness can have +/-2% tolerance. Note - Cabinet will be measure fron front side.
396
-
-
... More
Back Runner- Low Height Storage Providing and fixing in position at required location of Storage Size:- Width - as per requirement, Depth (in mm) 400 Height (In mm) 750
Strorage Top Made From 25 mm Thick Prelaminated MDF.
Sides, Bottom & Back Panel Made From 18mm Thick Prelaminated MDF.
Door Made From 18mm Thick Prelaminated MDF.
No of Shelf Will be 1 No All open Edge covered with 2mm/0.8 Thick Edge Band As per Design Requirement.
Unit will have groove handle.
Shutters hang on Modular Hinge.
Storage is provided with lock for security.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
592
-
-
... More
Roller Blinds: Providing and fixing manually operating & with decorative of Roller blinds/vertical blinds with composition of 100% polyester with washable fabric duly fixed with powder coated aluminum channel and clamps having nylon rope for manual operation of approved colour, design and texture in required pattern, including cost of all materials and labour involved forcomplete work etc. as per drawing, specifications and as directed by
Engineer-in-charge. Make: MaC/ AD/ S3/ Talgo/ Ami
396
-
-
... More
Reading Corner- Junior Library Providing and fixing in position at required location
(a) Ottoman - Overall Dimension: 1012mm L x 600 mm W x 900 mm H X Seat height 450 mm • Ottoman made up of 12 mm thick ply under structure, as shown in the drawing. Side & Back cushioned with 25 mm thick cushion. Seat cushioned with 50 mm thick cushion. Verticle pipe should be made of 25x25x1.2 mm thick MS Pipe. (b) Curved Book Rack Size - 1236mm L x D 350mm x H 900mm,Overall structure 18mm MDF , Central vertical and Horizontal Divider panel to be made of 18 mm thick MDF. Edges to be finished with 2mm thickPCV edge band machine pasted.
The product should be as per approved drawing from Engineer-In-Charge/Architect
396
-
-
... More
Pinup Board Providing and fixing in position at required location Alfa Pin up Board Size 900mm x 1200 mm - Display Surface Acrylic Velvet Fabric in (Blue,Green Maroon Colours)} with following specification. Core material Premium Quality Soft Board 12mm thickness to make the Board Warp-free and 100% Flat. Backer sheet 0.82mm. thick laminated sheet with extra melamine surface mix colour. Frame Spec’s - Core : 15 mm. Section Size : 23 H x 18.5 W. Wall thickness : 1.1 mm ( ±0.1). We will Provide Powder Coating in Frames.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
132
-
-
... More
PHYSICS LAB MODULAR FURNITURE
-
-
-
... More
Physics Lab Table: Providing and fixing in position at required location dimension of product should be Length:1200mm, Width:- 750mm, Height:-900 mm, Woking Height should be 900 mm. Storage depth has to be of 560 mm & top overhang by 190mm at front. Body part has to be made up of prime quality cold rolled close annealed Sheet of 0.8 mm thick, MIG/TIG & Spot welding are to be used for fabrication. Top to be made of 25mm thick prelaminated MDF. Side Edges are to be covered with PVC edge band on edge bending machine. 02 nos. of Sliding Door made of 0.8mm Thick CRCA Sheet. One adjustable shelf inside storage. Both slidding doors should be locked via central mechanism lock system. Handles die cast PVC. 4 Nos of PPCP Lavellers should be provided at the bottom for preventing scretch & Maintaining the level also. All steel components are to be epoxy powder coated after seven tanks anti corrosion treatment of surface.
The overall construction shall be as per product drawing given. In case there is any deviation between above defined specification & drawing, the above specification shall prevail. All dimensions can have +/-5 mm tolerance. Raw Material thickness can have +/-2% tolerance. The product should be as per approved drawing from Engineer-In-Charge/Architect
460
-
-
... More
Desk Mounting Cable Duct- Size:- Providing and fixing cable duct on table Length:1200mm Width: 65mm, Height: 125mm, Frame made of cold rolled close annealed Steel Structure. Use only MIG/TIG & Spot welding for fabrication. Provision for Cable and switches. All steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface. Edges should be covered with extruded alimunium trims and caps must be diecasted metal.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
710.4
-
-
... More
Computer Workstation Table for office staff - Table Type 3 Providing and fixing in position at required location of table dimension of 900 mm L x 600mm W x 760mm H. The Worktop should be made of 25 mm thick PreLaminated MDF Board. with 2mm thick PVC edge banding with hot melt glue. Both the side panels are to be made of 25 mm thick PreLaminated MDF Board. The table should have a Modesty Panel of entire length of 900 mm, with a height of 600 mm from top, made of 18 mm thick Pre Laminated MDF Board. The table to have a drawer made of MDF Board with dimension of 400 mm Width x 450 mm Depth x 150 mm Height. The Drawer will move on Single/Double Extension Ball Slide. The Drawer will also have a provision of Locking. The Table will have Leveller at bottom for adjusting for minor undulation of the floor, and also to prevent scratches on floor/ product.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
66
-
-
... More
Revolving Chair for office Staff & Teachers- C2 Providing and fixing in position at required location Specification dimension of product to be supplied H: 910- 1010mm, Seat H: 470-570mm, D:
575mm, W: 580mm: 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed plywood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Lockable center tilt mechanism and with Single piece Die castes PP arm rest. Quality tapestry.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
Green Chalk Board Providing and fixing in position at required location of size 2400mmx 1200mm (8ft x 4ft) with viCreous enamel steel sheet made of 0.3mm to 0.40mm thick steel sheet with 0.095mm thick top surface coating and back surface coating thickness of 0.03mm supported with 9mm thick HC Board back support and backing with 0.25 mm thick galvanized steel sheet fixed with anodized aluminium frame 20mm wide and 1.2mm thick and board shall be given additional support at bottom with Aluminium 4-Clamps.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
66
-
-
... More
CHEMISTRY AND BIOLOGY LAB
-
-
-
... More
Computer Workstation Table for office staff - Table Type 3 Providing and fixing in position at required location of table dimension of 900 mm L x 600mm W x 760mm H. The Worktop should be made of 25 mm thick PreLaminated MDF Board. with 2mm thick PVC edge banding with hot melt glue. Both the side panels are to be made of 25 mm thick PreLaminated MDF Board. The table should have a Modesty Panel of entire length of 900 mm, with a height of 600 mm from top, made of 18 mm thick Pre Laminated MDF Board. The table to have a drawer made of MDF Board with dimension of 400 mm Width x 450 mm Depth x 150 mm Height. The Drawer will move on Single/Double Extension Ball Slide. The Drawer will also have a provision of Locking. The Table will have Leveller at bottom for adjusting for minor undulation of the floor, and also to prevent scratches on floor/ product.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
164
-
-
... More
Table for Office staff - Table Type 2 Providing and fixing in position at required location table - Size:- Length:1200 mm, Width: 600 mm, Height 750 mm. C- Frame & Tubular cold rolled close annealed Steel Structure. Fabrication involves only MIG welding process.
Top- Size :- 1200x600x18 MM thk. Pre Laminated MDF. Side edges covered by 2 mm thick PVC Edge beading by Through Feed Machine..
Modesty- 0.8 MM Thk. CRCA sheet dotted embossed panel at visitor’s side.
Tie members- Horizontal Tie members 25x25x1.6 MM thk. CRCA Pipe. For rigid joint of frame structure threaded 4 mm thick sleeve welded in tie members.
Footrest- Footrest made of 25x50x1.25 mm Thk CRCA Pipe.
Three Storage Drawer - W-350mm, H-430mm D-575mm. with ebco make teliscopic channel for sliding of drawers. Hettich make locks use for locking.
Side frame- Side frame C - section pressed formed 1 mm thk.CRCA Sheet welded with 25x50x1.2 MM thk pipe.
Cap & Levellers- All pipe caps are curved PPCP material. 4 nos of Drum type leveller has been provided at bottom for mentaining level. It also preventing scratches on floor & Product as well.
Construction- The product comes in knock-down conditional for ease of transportation.
Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
Revolving Chair for office Staff & Teachers- C2 Providing and fixing in position at required location Specification dimension of product to be supplied H: 910- 1010mm, Seat H: 470-570mm, D:
575mm, W: 580mm: 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed plywood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Lockable center tilt mechanism and with Single piece Die castes PP arm rest. Quality tapestry.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
66
-
-
... More
Visitor/ Teachers Chair Providing and fixing in position at required location size: Total Height-850mm, Depth 570mm, Width-550mm Seat Height:440mm. Under Structure cantilever type MS cold rolled close annealed Tube 1.6 mm thick. Hot pressed ply wood with steel T-Nuts for rigid fastening. Single piece integral skin PU arm rest. Quality tapestry. High density PU moulded cushion. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. Upholstery 1.5 Mtr.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
164
-
-
... More
Fixed Top Rack for Apparatus Storage Providing and fixing in position at required location of apparartus Size:- Length: 1000mm, Depth:300mm, Height: 600mm. Bottle Rack Structure made up of prime quality MS cold rolled close annealed sheet 20G & 22G thk 3 fold press form side panel with dia 9mm holes in each panel throughout the height at 25mm pitch for adjustability of shelves. All steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface. Powder coating thk. 50-60 micron.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
364
-
-
... More
KG/ Pre-Primary CLASS
-
-
-
... More
5 seater table for KG 1-2 students Providing and fixing in position at required location of top material: ISI marked (IS 14587) ISI marked (IS 14587) 18mm thick prelaminated MDF board. The edges of the Top should be covered with 2 mm thick Injection Moulded PPCP (Poly popylene Co-Polymer) edge. Supporting Understructure Tube dimensions: 40 x 20 with minimum 1.6 mm and maximum 2 mm thickness. Understructure Legs CRCA Pipe Dia 44.5mm, with Leveler 25mm thickness Total no of leg 4 Nos. of Mild Steel and have min. 45-micron thick powder coating. All understructure tubes to be welded together. All furniture layout must be customizable to promote collaborative learning in an attractive theme-based manner. All metal understructure parts will be powder coated.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
1508
-
-
... More
Small stage for performances by KG1-2 students Providing and fixing in position at required location of Material: Pre calibrated plywood with at least 20 mm thickness, max. height: 1 feet, with a step in exact mid point for easy climbing up by age 3-6 children. Should be colored in scheme matching with room theme. Max length: 5 feet, max width: 3 feet. Should be able to bear weight of min. 150 kg. Shape to be rounded / elliptical / near semi circle.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
450
-
-
... More
Theme based Chair for Class KG - 1 & 2 Providing and fixing in position at required location multi colour chair made up of Non Toxic Virgin Grade PPCP (Polypropylene Co-Polymer) having a overall size of the chair is L 32 cm x 41 cm x H 56 cm. It should have sitting area of size L 26.5 cm x W 26 cm having back rest of size W 29 cm x H 26 cm. The sitting height from the ground to be 31 cm. There should be a square hole on the backrest of size L 18 cm x H 3.5 cm for air flow. The chair is to be a single piece unit made from virgin grade material. The leg dimesion is 40 mm x 20 mm, L shaped. The chair may have pre formed shapes matching the theme of the room.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
7540
-
-
... More
Theme based pigeon hole storage for KG1-2 students Providing and fixing in position at required location of Storage Size:- Overall Dimension of the product should be 2108X400x900 mm Ht. Storage must have 1 pigeon hole per student, corresponding to 25 students per classroom. Each hole depth to be min. W400x380 Dx146 mm Ht. Complete structure should be made of 18 mm thick MDF. Edges should be covered with 2 mm thick PVC edge band on edge bending machine. Bottom Frame/ Skirting of 50 mm Height, to be made of 18 mm thick Pre-laminated MDF. Edges should be covered with 2mm thick PVC edge band on edge bending machine. The overall construction shall be as per product drawing given. In case there is any deviation between above defined specification & drawing, the above specification shall prevail. All dimensions can have +/-5 mm tolerance. Raw Material thickness can have +/-2% tolerance. Note - Cabinet will be measure fron front side.
450
-
-
... More
Wall cushioning to prevent collision. Providing and fixing of Printed PET Panels. Decorative elements using pictures to build a theme or aura. Sound Absorption: Products tested by ARAI NRC: 0.45 TO 0.95 (depends on application and installation) Density: 170- 180 kg/m3, to be pasted on walls directly with adhesives. The surface of the panels should be resistant to surface wetting (rate of resistance to surface wetting: 99.6%) Thickness: 10 mm, Flammability: EN - 13501 Class B s1, d0 , Composition: Recycled 100 % Polyester Fiber • No Chemical Binders
• VOC Free
• Non-Toxic, Non-Allergenic, No Irritants
• Resistant to Fungus or Bacteria.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
2250
-
-
... More
Theme based Pinup Notice Board. Providing and fixing in position at required location the frame should have preformed shapes as per themes and have colors that appeal to children of KG1-2. Reference themes can be Jungle, Traffic, Marine, Space, and any other which bidder can creatively design. Approx. 4 feet by 3 feet size 20mm thick soft board paneling with using 12mm thick approved make and quality soft board (IS 3348). Soft board should be fixed on 8mm thick commercial ply backing for better support. Remark: . Dimension taken is 3 feet x 3 feet.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
900
-
-
... More
Play Mat Providing and fixing of Set of 4 mats made of soft rubber 600x600mm. The product colors & material shall be as per the approved sample and as per the direction of Engineer-In-Charge.
Should have following:
• No Chemical Binders
• VOC Free
• Non-Toxic, Non-Allergenic, No Irritants
• Resistant to Fungus or Bacteria.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
1225
-
-
... More
Climbing Wallboard: Providing and fixing in position at required location of climbing wallboard dimensions to be appropriate for age 3-6 children, 800 mm x 800 mm per wallboard
Should have preformed shapes as per themes and have colors that appeal to children of KG1-2 Reference themes can be Jungle, Traffic, Marine, Space, and any other which bidder can creatively design.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
1800
-
-
... More
Green Chalk Board Providing and fixing in position at required location of size 2400mmx 1200mm (8ft x 4ft) with viCreous enamel steel sheet made of 0.3mm to 0.40mm thick steel sheet with 0.095mm thick top surface coating and back surface coating thickness of 0.03mm supported with 9mm thick HC Board back support and backing with 0.25 mm thick galvanized steel sheet fixed with anodized aluminium frame 20mm wide and 1.2mm thick and board shall be given additional support at bottom with Aluminium 4-Clamps.
The product should be as per approved drawing from Engineer-In-Charge/Architect..
450
-
-
... More
Table for Office staff - Table Type 2 Providing and fixing in position at required location table - Size:- Length:1200 mm, Width: 600 mm, Height 750 mm. C- Frame & Tubular cold rolled close annealed Steel Structure. Fabrication involves only MIG welding process.
Top- Size :- 1200x600x18 MM thk. Pre Laminated MDF. Side edges covered by 2 mm thick PVC Edge beading by Through Feed Machine..
Modesty- 0.8 MM Thk. CRCA sheet dotted embossed panel at visitor’s side.
Tie members- Horizontal Tie members 25x25x1.6 MM thk. CRCA Pipe. For rigid joint of frame structure threaded 4 mm thick sleeve welded in tie members.
Footrest- Footrest made of 25x50x1.25 mm Thk CRCA Pipe.
Three Storage Drawer - W-350mm, H-430mm D-575mm. with ebco make teliscopic channel for sliding of drawers. Hettich make locks use for locking.
Side frame- Side frame C - section pressed formed 1 mm thk.CRCA Sheet welded with 25x50x1.2 MM thk pipe.
Cap & Levellers- All pipe caps are curved PPCP material. 4 nos of Drum type leveller has been provided at bottom for mentaining level. It also preventing scratches on floor & Product as well.
Construction- The product comes in knock-down conditional for ease of transportation.
Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
450
-
-
... More
Revolving Chair for office Staff & Teachers- C2 Providing and fixing in position at required location Specification dimension of product to be supplied H: 910- 1010mm, Seat H: 470-570mm, D:
575mm, W: 580mm: 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed plywood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Lockable center tilt mechanism and with Single piece Die castes PP arm rest. Quality tapestry.
The product should be as per approved drawing from Engineer-In-Charge/Architect.
450
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%