Ministry Of Road Transport And Highways Tender

Bituminous Concrete Providing and laying bituminous concrete using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per clause 507 of specification. b) Using Drum Mix Plant of appropriate capacity and Paver Finisher Hydraustatic with Sensor control (vi) for Grading-II (30-45 mm thickness ) with 30/40 bitumen(VG-40) For BT Patch

Retro- reflectorised Traffic signsProviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign board as per IRC 67-2012 made of high intensity Micro-Prismatic Grade Sheeting (Type XI) vide IRC: 67:2012 clause 6.7.3.2 and clause 801.3.3 of MoRT&H fixed over Aluminum composite material sheet with thermoplastic core of Low density polyethylene (LDPE) between two thick skins/sheets of aluminum with overall thickness of 4mm and aluminum skin of thickness 0.3 on both side, the ACM shall conform to Table 6.1 of IRC:67:2012 and Table 800-1 of MoRT&H specification and High Intensity Micro Prismatic Grade Sheeting shall conform to Table 6.6 of IRC:67:2012 and Table 800-3 of MoRT&H specification of in the clause IRC 6.8 of the IRC 67-2012 and clause 801.3.7 of MORTH message legend numerical letter etc. and borders shall be screen printed on high intensity micro prismatic sheeting shall conform to clause 801.3.7 with digital printing ink or of cutout from transparent durable overlay or cutout from the same type of reflecting sheeting for cautionary/ mandatory/ signs, supported on MS sign post of size 75mm x75mm x 6mm of 3.60 meter over all length and fix to ground by means of properly designed foundation of dimension 450x450x600mm with M20 grade concrete. The ACM sheet shall be fixed to the post with four minimum four number breakaway bolts. & supported with a back support frame of 25mmx25mmx3mm angle. 10 years warranty for Retro Reflection Sheeting to be provided from the original sheeting manufacture as per clause 6.9 of IRC: 67:2012 & a certified copy for three years for outdoor exposure report from an independent test lab as per clause 6.7 of IRC: 67:2012 for the product offered shall be submitted by the contractor.Note:- Manufacture name and date of manufacture is to be printed (Embossed) at the backside of the board.

i) 90 cm equilateral triangle

ii) 60 cm equilateral triangle

iii) 60 cm circular

iv) 80 mm x 60 mm rectangular

v) 60 cm x 45 cm rectangular

Supplying and installation of delineators (road way indicators,hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide stripes, fitted with 80 x100 mm rectangular or 75 mm dia circular reflectorised panels at thetop, buried or pressed into the ground and confirming toIRC-79 and the drawings.

Kilo Metre Stone Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting andprinting etc

(ii) Ordinary Kilometer stone (Precast)

(iii) Hectometer stone (Precast)

Providing painting, figuring and numbering as per IRC specifications complete with Synthetic Enamal Paint for 5th Km. Stone.

ii) One coat on old work.

Providing painting, figuring and numbering as per IRC specifications complete with Synthetic Enamal Paint for ordinary Km. Stone. (ii) One coat on old work.

Providing painting, figuring and numbering as per IRC specifications complete with Synthetic Enamal Paint for 0.2 Km. Stones or Boundary Stones.. (ii) One coat on old work

Providing painting and figuring of road sign boards (excluding posts/kerbs)

ii) One coat on old board.

4.13 Construction of Shoulders with approved material/selected soili/c excavation all lifts & leads i/c grading to required slope &camber of 4% and compacting using vibratory roller of 80 to 100 kN static weight to meet requirement as per relevant clause of 400 (B) Hard Shoulders (CBR value 12)

Plain/Reinforced cement concrete in sub-structure complete as per drawing and technical specifications B PCC Grade M20

Painting Two Coats on New Concrete Surfaces

Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces