Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Addn/altn To Bldg No. P-431 And Other Radar Bldgs And Provn Of Picketing Blocks And Certain B/r And E/m Works At Af Stn Gwalior in Gwalior, Madhya Pradesh, with an estimated contract value of Rs. 48,80,000. The bid opening date for this tender is 16-10-2026 and the last date for bid submission is 19-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - MP Tender

Opening Date16 Oct 2026
Closing Soon19 Nov 2026
Tender Amount₹ 48,80,000 
Notes
Download

Costs

Description

Addn/altn To Bldg No. P-431 And Other Radar Bldgs And Provn Of Picketing Blocks And Certain B/r And E/m Works At Af Stn Gwalior

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
S&F MS steel sections ( angle, flat, MS plate/ sheet, bars etc) as in gates, door frame, window grills, hung type grilled gates, grating,etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, including MS hinges/ pintle hinges, stops, hand-made sliding bolts, etc. railings, framework of watertanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

1035

100

-

... More
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

0.8

100

-

... More
S&F MS tubular pipes as in vertical post , rafter & purlins as in sheds/canopy cut to reqd shape , welding drilling and including bending as necessary , gusset plates, riveting , etc confirming to Fe-290 Gde-E-165 complete all as specified and as directed.

2200

100

-

... More
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and as directed

509.46

103

-

... More
M&L Virified Ceramic tiles light shade 10 mm thick (square/ ectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match set and jointed in neat cement slurry and pointed in white or coloured cement match with tiles over 20mm thick screed bed in CM 1:6 to complete all as specified and directed. Note: Shade and design as approved by GE.

250

104

-

... More
All as per item herein above but including 10mm thick rendering on brick work or concrete surface other than fair faces in CM 1:4

20

104

-

... More
M&L for glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement including 10mm thick rendering on brick work or concrete surface other than fair faces in CM 1:4 complete all as specified and directed.

241.5

105

-

... More
M&L for non skid joint free coloured ceramic tiles 7-8mm thick (Square/ Rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 15mm thick 1:6 screed bedding complete all as specified and directed.

26.63

105

-

... More
Demolition of cement concrete ( unreinforced) of any description and in any position not otherwise specifically provided and removing to a distance exc. 500 m and n.exc. 5 Km from site complete all as specified and directed.

7.5

107

-

... More
M&L for Sand filing under floors or in foundation incl. watering and consolidation complete all as specified and directed.

2.5

109

-

... More
M&L machine pressed precast concrete interlocking paver block (Except tiles) any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed.

100

110

-

... More
M&L for Providing, PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges, filling and mass cocrete & complete all as specified and as directed.

12.5

111

-

... More
M&L for Complete removal of existing treatment on walls (any number of layers) by scrapping with mechanical wall sander(having mechanical vaccum mechanism)Washing, rubbing down and stopping of painted surfaces to make the surface free from dust, loose paint etc by skilled labour and filling the cracks and depressions with putty to make the surface even and smooth matching to the adjacent wall surfaces and applying two coats of Acrylic Smooth exterior paint with Silicone additives of required shade/tint as approved by GE and users in Comouflaging pattern on CCD scheme with roller over and including primer coat of exterior primer applied as per manufacturer instruction with fully automatic airless spray machine and allow 6-8 Hrs to dry the surface in the both the coats of paint to any type of building at any height including necessary scaffolding and safety measures and complete as specified and directed. (Make : Asian Paints Apex Ultima Stretch or Berger Weathercoat Long Life Flexo or Shalimar Paints WeatherPRO+ as approved by GE) NOTE:- (i) Primer and paint shall be of same make. (ii) The minimum qty of exteriror paint and primer shall be used as per coverage capacity of paint and primer as recomended by the manufacturer .

300

112

-

... More
M&L for Preparing old decorated plastered or unplastered surfaces of external walls and applying one coat of exterior emulsion paint by the use of rollers complete all as specified and directed

200

100

-

... More
M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers and and applying a coat with pop putty to make the surface even and smooth matching to the adjacent wall surfaces and applying two coats distemper oil emulsion, over a coat of primer with roller complete all as specified and directed.

223

100

-

... More
all as per item herein above but one coat of distemper oil emulsion on ceiling surface complete all as specified and directed.

100

100

-

... More
M&L for preparation of new steel & iron surfaces of any description over 10cm in width or girth applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

255

100

-

... More
M&L for preparation of old steel & iron painted surfaces of any description over 10cm in width or girth M&L for applying one coat of synthetic enamel paint complete all as specified and directed.

200

100

-

... More
S & F vitreous china wash basin, white, flat back size 630 X 450mm including 32mm Brass CP waste Coupling, PVC Waste pipe and Grating complete all as specified and directed.

2

114

-

... More
M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensilestrength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified & complete all as specified and directed.(72+189)

261

114

-

... More
M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, Ridge, valley/ gutter fixed with self tapping screws & complete all as specified and directed.

2

114

-

... More
M&L for Dismentling of existing corrugated steel sheeting, any gauge, thickness complete all as specified and directed.

27.45

114

-

... More
Demolition of cement concrete ( unreinforced) in Roofs, floors (other than ground floors), tiles including existing roof treatment (screed plaster,& tarfelt of any description) and removing to a distance exc. 500 m and n.exc. 5 Km from site complete all as specified and directed.

12.5

114

-

... More
M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in and levelling course etc over roof surface complete all as specified and as directed.

500

114

-

... More
M & L for 10 mm thick screed bed in cement mortar 1:4 mixed with using liquid water proofing compound as per manufacturers instructions (Note:Water proofing compound shall be measured and paid seprerately under respective item of "BoQ")

500

114

-

... More
M&L for hybrid (acrylic+ polyurethene) based waterproofing flexible liquid applied membrane single component, three coat system reinforced with fibre mesh having crack bridging upto 2mm and elongation upto 200% and dry film thickness(DFT) 1000 microns with Heat reflective system for all types of exposed roof slabs (new and old) terraces (sloped and flat) complete all as specified and directed.

500

114

-

... More
Supply only liquid water proofing compound complete all as specified and directed.

15

114

-

... More
S&F in repair coloured vitreous china EWC including cistern (Cascade Pattern) wall hung/floor mounting as single piece closet of parryware or equivalent including all fitting & fixtures required for proper function complete including necessary pipe, bend, making holes into existing wall, floor etc and making good with PCC 1:2:4 type B1 using 20mm graded stone aggregate complete all as specified and directed.

1

114

-

... More
M&L for 15mm thick rendering fare face of brick/stone masonry walls in CM 1:4 finished even and smooth (without using exrtra cement) including taking down cement plaster on brick surface or stone surfaces and raking out joints hacking for key, scrubbing down with water etc in small patches at different locations complete all as specified and directed.

120

114

-

... More
S&F in repair Vitreous China urinals half stall type flat back white , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinals to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing flush pipe grating and union for discharge pipe complete all as specfied and directed.

3

114

-

... More
S&F in repair, vitreous china squatting pan 'Orrisa' pattern size 580 x 440 mm white integral floor rests ( excluding flushing cistern and flush pipe ) including connection to trap and to flushing pipe, anti syphonage pipe etc complete including making good to floor complete all as specified and directed.

2

114

-

... More
S&F steel tubing 20mm bore medium grade with all fitting and fixed complete to walls, floor and ceiling etc complete all as specified and directed Note :- cutting chases shall be measured and paid separately under respective item.

8

114

-

... More
all as per item herein above but 15 mm bore complete all as specified and directed

10

114

-

... More
S&F in repair in repair sinks with drainage board made of stainless steel 1 mm thick in kitchen or laboratory with plug washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete as specified and as directed.

1

114

-

... More
S&F in repair, 15mm bore health faucet fancy type chromium plated with accessories complete all as specified and directed.

2

114

-

... More
S & F in repair, for 10 litre capacity PVC valve less symphonic action type flushing cistern low level , white , with inlet, ball valve, float and handle including brackets complete all as specified and directed.

2

114

-

... More
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in any type of soil all as specified and directed.

14.13

114

-

... More
M&L for Hard core of gauge n.exc 63 mm , with broken stone or boulders , deposited, spread and levelled in layers n.exc 15 cm thick, watered and well rammed to a true surface all as specified and as directed.

46.5

114

-

... More
M&L for PCC 1:4:8 type D2 using 40mm graded aggregate as in foundation, filling and mass concrete all as specified and directed.

2.64

114

-

... More
Use and waste of formwork to sides of concrete foundations, footings, bases of columns raft and raft beams sides and soffits of foundation and plinth beam and similar work vertical or to batter all as specified and directed.

18.5

114

-

... More
Use and waste of formwork to sides of pillars, posts, struts, piers, column and stanchions for rough finished surfaces of concrete square, Circular rectangular on plan or polygonal all as specified and directed.

7.2

114

-

... More
Use and waste of formwork to sides of sides and soffits of floor or roof beams, beam hauncheing, girders, bressmmers, lintels cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc all as specified and directed.

6.62

114

-

... More
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) all as specified and directed.

15.75

114

-

... More
M&L for Reinforced cement concrete M25 (Design Mix) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete all as specified and directed.

6.11

114

-

... More
M&L for Reinforced cement concrete M25 (Design Mix) using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts all as specified and directed.

0.55

114

-

... More
M&L for Reinforced cement concrete M25 (Design Mix) using 20 mm graded stone aggregate as Slab supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck salb and in shelves and the like all as specified and directed.

3.51

114

-

... More
M&L for Reinforced cement concrete M25 (Design Mix) using 20 mm graded stone aggregate as beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed.

1.7

114

-

... More
M&L for Mild steel TMT reinforcement Bars of 10 mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clip all as specified and directed.

920

114

-

... More
M&L for Mild steel TMT reinforcement bars of 5 mm dia and over up to 10 mm dia in stirrups, spacers and binders, cut to length bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire annealed not less than 0.9 mm dia or securing with clip all as specified and directed.

80

114

-

... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and directed.

5.2

114

-

... More
Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed.

53.93

114

-

... More
Dismantaling of brickwork or stone/ boulder masonry,built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

0.8

114

-

... More
M&L for brick work with sub class 'B' bricks , straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed.

6

114

-

... More
M&L for 15mm thick rendering other than fare face of brick/stone masonry walls in CM 1:6 finished even and smooth without using extra cement all as specified and directed.

35

114

-

... More
M&L for 15mm thick rendering fair face of brick/stone masonry walls in CM 1:4 finished even and smooth without using extra cement all as specified and directed.

42.6

114

-

... More
M&L for Preparation of newly plastered surface and applying two coat of distemper oil emulsion white or tinted by the use of rollers over a coat of Putty as approved complete all as specified and directed.

60

114

-

... More
M&L for prepration of newly plastered surfaces and applying two coats of external emulsion paint/weather coat, over a coat of primer over a coat of wall care putty in camouflaging pattern on CCD scheme (Pattern as approved by GE) on surfaces of any type of building, any surfaces, any height, complete all as specified and directed.

42.6

114

-

... More
M&L for Rendering 5 mm thick in cement plaster 1:3 on ceiling surface finished even and smooth without using extra cement all as specified and directed.

15.75

114

-

... More
M & L preperation of ceiling surfaces and applying three coats of white wash as in ceiling surface complete all as specified and directed.

15.75

114

-

... More
S&F for 110 mm bore dia PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor and wall complete all as specfied and directed.

5

114

-

... More
S&F 110mm PVC(SWR) bends fixed to PVC pipes with necessary solvent cement complete all as specfied and directed.

3

114

-

... More
S&F for 75mm bore dia PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor and wall complete all as specfied and directed.

8

114

-

... More
S&F 75mm PVC(SWR) bends fixed to PVC pipes with necessary solvent cement complete all as specfied and directed.

3

114

-

... More
S & F in repair 75 mm bore PVC (SWR) floor trap with grating incl jointing with solvent cement

3

114

-

... More
S & F in repair 110 mm bore PVC (SWR) floor trap plain with grating incl jointing with solvent cement and all as specified

2

114

-

... More
S&F in repair 15mm bore pillar taps, fancy type, chromium plated screwed down high pressure with or without lettered with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

2

114

-

... More
S&F in repairs Brass CP, fancy type 15mm bore two way Angle Cock with crutch or butterfly handle, screwed both ends for iron pipe.

3

114

-

... More
S&F in repairs Brass CP, fancy type 15mm bore Angle Cock with crutch or butterfly handle, screwed both ends for iron pipe.

8

114

-

... More
S&F in repair, rotational moulded ploythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of 500 Ltr capacity complete all as specified and directed.

1

114

-

... More
S&F in repair, rotational moulded ploythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of 1000 Ltr capacity complete all as specified and directed.

1

114

-

... More
M & L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed and all as specified and directed.

3

114

-

... More
S&F in repair looking mirror of size 450x600 with selected quality glass mounted on 6mm thick AC board on back side with PVC frame and fixed with chromium plated screws and cup washers complete all as specified and directed.

2

114

-

... More
S&F in repair for PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

8

114

-

... More
S&F in vitreous china urinal partitiaon white of size 310x700mm complete all as specified and directed.

2

114

-

... More
S&F chromium plated Urinal spreader alongwith CP connection pipe complete all as specified and directed.

3

114

-

... More
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n'exc 4 Sqm each including iron mongories complete all as specified and directed.

2

114

-

... More
S&F powder coated aluminium frame for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc (minimum thickness of powder coating 50 micron) complete all as specified and directed by Engr-in-Charge.

105

114

-

... More
S&F powder coated aluminium door shutters, aluminium including necessary joining cleats, glazing clips, ruber neoprene packing, handle 02 Nos in each door, hinges, anodised alumi. snap beading, screws (Thickness of powder coating not less than 50 micron) etc comp. all as specified and directed.

5.04

114

-

... More
S&F powder coated Anodised aluminium window and ventilator shutters, partition, without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, hinges, screws etc. complete all as specified etc complete all as specified and directed.

15

114

-

... More
S&F 4mm thick ACP (Aluminium composit panel) of any colour fixed to door with necessary rubber gasket and aluminium snap beadings tint match with existing complete all as specified and directed by Engr-in-Charge.

11

114

-

... More
S&F 5mm thick tinted glass fixed with necessary rubber gasket and aluminium snap beadings tint match with existing complete all as specified and directed.

8

114

-

... More
S&F Factory made solid PVC Moulded door shutter (with Wood free EPS), 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed.

3.15

114

-

... More
S & F solid PVC moulded door frame of size 50 mm x 47 mm made out of 5 mm thick PVC sheet (shade matching with door shutter) reinforced with MS Square tube and edges will be painted to match with printed sheet complete all as specified and directed.

9.9

114

-

... More
S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section comp. all as specified and directed.

2

114

-

... More
S&F 150mm long Aluminium handles, cast type anodised, complete all as specified and directed.

4

114

-

... More
S&F for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed and specified

2

114

-

... More
S&F 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as directed and specified

6

114

-

... More
S&F Bras Mortice lock,4 Liver vertical type, size 100 mm work completed all as specefied and directed.

2

114

-

... More
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil all as specified and directed.

300

114

-

... More
M&L for 100mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base for parking shed complete all as specified and as directed.

300

108

-

... More
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n exc 50 m and making good surface.

27

108

-

... More
M & L for MS work as in swan neck / brackets etc for fencing post & strut in fencing, Flat iron for securing chain link fencing etc including cutting tops to shape as directed, drilling holes, riveting for wires etc including welding and all necessary drilled bolting or riveting etc and similar work conforming to Fe290 Gde E-165 complete all as specified and directed.

230

114

-

... More
S &F Mild steel, plain sheet of 1.60 mm thickness in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or weldedseams, including bending or turning up, mitred angles, etc. as required & specified and directed by Engineer-in-Charge.

60

114

-

... More
M&L for nominal mix cement concrete (1:1.5:3) type B1, using 20 mm graded stone aggregate as in mass concrete for picketing block complete all as specified and directed.

3

114

-

... More
S&F UPVC luxury casement sound proof fixed type windows and frame with double toughned glass glazing 65mm/C65PS3/Z-SASH, DG INS, TGH (5T+12+5T) internal plain and external tinted including necessary builders hardware etc with lock and key complete all as directed.

22

114

-

... More
M&L for point wiring with stranded copper conductor 1.5. Sqmm 1100 Volts grade FRLS PVC insulated and unsheathed including ISI marked PVC casing capping of required sizes as indicated including all accessories, copper conductor cable 1.5 Sqmm insulated and unsheathed PVC cables as earth wire, modular terminal boxes closed recossed type. PVC modular board all as required as specified and directed for the following :-

-

-

-

... More
(a) One light/ Fan point controlled by one way switch.

55

114

-

... More
(b ) One 5 Amps switch socket combination on independent board.

3

114

-

... More
(c) One 5 Amps socket on same board with other switches.

4

114

-

... More
All as per item herein above but 2.5 Sqmm stranded copper conductor and independent board for 15 Amps switch/ socket point all as specified and directed by Engineer-in-Charge.

20

114

-

... More
S&F Modular switch 1 way 6A, 1 module single pole 230 V.

55

114

-

... More
S&F Modular type switch socket out let 3 pin 6 Amps flush type 230 Volts multipurpose complete all as specified and directed.

7

114

-

... More
All as per item here-in-before above but 6 Amps and 16 Amps multipurpose( 3 Pin 16 Amps and one pin 6 Amps controlled by one switch) complete all as specified and directed.

20

114

-

... More
M&L for sub main wiring in replacement of using two single core PVC insulated, unsheathed stranded copper conductor cable of size 4 Sqmm FRLS of voltage rating upto and including 1100 Volts drawn in and including 20mm dia medium grade PVC conduit along-with one run of PVC (Green colour) insulated , unsheathed, stranded copper conductor of size 4 Sqmm as earth continuity conductor complete all as specified and directed. Note:- Two run of single core PVC cable with one run of earth conductor shall be measured as one unit

180

114

-

... More
S&F MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA with adjustable overload setting and having thermal magnetic release and to be fixed in existing distribution board, complete all as specified and directed.

15

114

-

... More
Supply& Fixing LED Batten fittings 1x20 Watt complete with round block etc, incl PVC gutties and flexible wire and connecting to ceiling rose complete all as specified and directed by Engineer-in-Charge.

3

103

-

... More
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

1

114

-

... More
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engineer-in-Charge.

20

114

-

... More
Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

30

114

-

... More
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed by Engineer-in-Charge.

1

114

-

... More
Supply, install commissioning and testing of split type wall mounted Non Inverter Air Conditioner units indoor/outdoor of capacity 2 TR (6000 K Cal / hr) single phase Non CFC / HCFC suitable for 230 volts + 10% , 50 Hz, AC supply complete with cordless remote control unit at any location with minimum 2/3 star rating and EER 3.2 and above. Note : Copper tubing for suction and discharge upto 3 RM shall be included in quoted rates.

6

114

-

... More
Supply and fix in replacement of triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 20 Amps all as specified and directed by Engineer-in-Charge.

2

114

-

... More
Supply and fix Electronic Voltage stabilizer suitable for 1.5/2 TR Split air conditioner, for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 140 V to 300 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5.00 KVA completely all as specified and directed by Engineer-in-Charge.

6

114

-

... More
Taking down carefully the serviceable indoor and outdoor units of wall-mounted Split Air Conditioners with 1.5/2 TR capacity and refixing the same in OPs Room as per user requirement along with copper pipes and fittings complete all as specified and directed.

2

100

-

... More
S&F ceiling rose surface backelet ISI marked , 2 to 3 terminal all as specified and directed.

5

114

-

... More
S&F in position Heavy duty hot dip galvanised powder coated cable trunking perforated type with cover of the sizes 100 mm wide x 25 mm wall height cable tray for supporting 1100 volts grade armoured/unarmoured aluminium/ copper conductor cables, fabrication from angle and perforated 2mm (14 SWG) thick M.S. CRCA sheet powder coated with expansion coupler plates duly galvanised, with bolts, washer and nuts, knock out holes for cable connections as per approved design, the tray shall comply with the specification of NEC (National Electric Codes) and NEMA (National Electric Manufacturers Association) the steel shall be as per IS:226 and galcanising as per IS:2629/BS 729/ASTM 123 including taking down of existing cables in carefully and fixing the cable on cable tray complete all as specified and directed.

60

114

-

... More
S&F cable tray/bus bar fixing supports and other steel work including MS flats, angles, T iron, channel etc,. Cutting drilling holes/welding in MS members as per site requirements, duly painted the supports with 2 coats of synthetic enamel paints over a coat of primer, including provision of dash fastners and other fixing accessories complete all as specified and directed.

100

114

-

... More
Supply and Fixing industrial type socket with plug top, Single pole and neutral and earth plug 240V, 32 Amps with steel enclosure and one MCB SPN 32 Amps complete all as specified and directed.

4

114

-

... More
M & L for outdoor stand of suitabel size for fixing of outdoor unit capacity 2 TR

4

114

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.