Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Repair/replacement And Maint Of Submersible Pump Set, Redevelopment Of Borewell And Valve Pit Chamber, Sluice Valve, Gate Valve And Connected Works At Domestic Area At Af Station Gwalior in Gwalior, Madhya Pradesh, with an estimated contract value of Rs. 35,00,000. The bid opening date for this tender is 26-10-2026 and the last date for bid submission is 23-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender - MP Tender
Opening Date26 Oct 2026
Closing Soon23 Nov 2026
Tender Amount₹ 35,00,000
Costs
EMD
₹ 70,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Repair/replacement And Maint Of Submersible Pump Set, Redevelopment Of Borewell And Valve Pit Chamber, Sluice Valve, Gate Valve And Connected Works At Domestic Area At Af Station Gwalior
Contact
Tender Id
2026_MES_795758_1Tender No
8644/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Cutting out the unserviceable / damaged portion of the 80mm bore GI column pipe of any grade, making new threads to suitable lengths (for providing long threaded socket) for jointing the pipes with old/new pipes to replace the unserviceable length or to increase the length of column pipe specified etc complete all as directed by the Engineer-in-Charge. Note:- (i) Taking out of pipe is included in respective item of Serial No. 01 here in before.
(ii) Each cut & threading shall be measured as one unit but new socket, if any provided shall be measured and paid for separately under appropriate item of Schedule `A’ as supply only under relevent item. (iii) New column pipe length shall be measured and paid for separately under relevent item.
5
-
-
... More
Cutting out the unserviceable / damaged portion of the 50mm bore GI column pipe of any grade, making new threads to suitable lengths (for providing long threaded socket) for jointing the pipes with old/new pipes to replace the unserviceable length or to increase the length of column pipe specified etc complete all as directed by the Engineer-in-Charge. Note:- 1. Taking out of pipe is included in respective item of Serial No. 01 here in before.
2. Each cut & threading shall be measured as one unit but new socket, if any provided shall be measured and paid for separately under appropriate item of Schedule `A’ as supply only under relevent item. 3.New column pipe length shall be measured and paid for separately under relevent item.
5
-
-
... More
Supply and fixing of steel wire rope 2 mm Dia for guard and tied / binded with submersible motor and pump set complete all as specified and directed. Note: Taking out of old/Broken steel rope shall be included in srl item No. 1.00 and 2.00 here-in-before.
200
-
-
... More
M&L for mild steel ERW casing pipe of 200mm bore, ISI marked, having wall thickness 7 mm as per IS 4270-1992, heavy grade jointed with electric resistance of high frequency induction welding the same with existing casing pipe and providing two coats of black bituminous paint externally complete all as specified and directed.
Note: Cost for dismantling casing pipe by cutting including excavation around the pipe for taking out unserviceable casing pipe is deemed to be included in quoted rate.
3
-
-
... More
M&L for mild steel ERW casing pipe of 150mm bore, ISI marked, having wall thickness 7 mm as per IS 4270-1992, heavy grade jointed with electric resistance of high frequency induction welding the same with existing casing pipe and providing two coats of black bituminous paint externally complete all as specified and directed.
Note: Cost for dismantling casing pipe by cutting including excavation around the pipe for taking out unserviceable casing pipe is deemed to be included in quoted rate.
2
-
-
... More
Supply/ jointing and testing galvanized iron water tubing medium grade as in column pipe ,ISI marked, including necessary new GI socket, heavy duty, seamless, long threaded ISI marked & fittings / accessories ISI Marked complete all as specified and directed for the following size
-
-
-
... More
80 mm bore
120
-
-
... More
50 mm bore
60
-
-
... More
Supply and fixing in repairs of pressure water suction gauge -1 to 600 bar as per existing size for 80 mm/50 mm bore and including taking out existing old unserviceable ones complete all as specified and directed.
20
-
-
... More
Lowering down of the submersible pump set after repair of any description and any capacity & in any position, in bore well along with column pipe 80/50mm Dia and submersible cable of any size (approximately 40 mtr depth of pump set from GL) complete all as specified and directed by Engineer-in-Charge including making necessary electric connections & testing the pump set after lowering. Note:- (i) Contractor shall take proper precautions while lowering pump set in bore well so as to avoid any damage to column pipe and submersible cable. All necessary T&P and equipment's required for lifting out pump set etc shall be arranged by the contractor at his own cost and the same included in the quoted rates. (ii) Rates quoted by the contractor for the above item includes the cost of assembling & connecting pump set to column pipes & assembling, jointing and fixing column pipes/pump sets/submersible cable and making necessary connections and including reconnecting water supply system. The required materials like column pipes and submersible cable shall be measured and paid for separately under appropriate item of Schedule `A'.
36
-
-
... More
Supply and fix in repair Foot valve CI body flanged type of size 200 mm heavy grade, screwed both ends for connecting to pipeline all as specified and directed.
2
-
-
... More
All as per srl item No 13 here-in-before but of Size 150mm Dia
2
-
-
... More
All as per srl item No 13 here-in-before but of Size 100mm Dia
1
-
-
... More
Repair to impeller of submersible pump of any description by brazing , welding, metalling, turning and polishing complete all as specified and directed , for the following capacities of the pumps coupled with submersible motors :
-
-
-
... More
20 HP
6
-
-
... More
17.5 HP
6
-
-
... More
Repair to Diffuser of submersible pump of any description by brazing , welding, metalling, turning and polishing complete all as specified and directed , for the following capacities of the pumps coupled with submersible motors :
-
-
-
... More
20 HP
6
-
-
... More
17.5 HP
6
-
-
... More
Supply only 6 Sqmm, 3 Core, flat submersible Cable, PVC insulated, PVC sheathed with multi-stranded copper conductors, 1100 Volt grade complete all as specified and directed. Note:- Taking out of cable shall be included in srl item No. 1 & 2.
300
-
-
... More
Material & labour for water proof joint of submersible cable 3 core of any size using fine rubber and M Seal etc all as directed by Engineer -in-Charge. Note:- Taking out of cable shall be included in srl item No. 1 & 2.
20
-
-
... More
Material and labour for cast iron/ductile iron specials/fittings such as bend, tee, socket, collar Reducer, Tail Pieces etc. suitable for spigot and socketed/ flanged end pipe of above150mm bore complete all as specified and directed. Note:- Taking out of cable shall be included in srl item No. 1 & 2.
200
-
-
... More
Dismantling and strip opening of submersible pump & motor of any description and in any position for servicing /overhauling, cleaning, oiling/greasing, fixing of serviceable parts in position, removing & replacement of defective / unserviceable parts with new parts, reassembling the Pump & motor, ensuring proper alignment of pump and motor, fixing in position, connecting to existing system and testing at site on full load to the entire satisfaction of the Engineer-in-Charge for the following capacities pumps & motors :- Note: - (i) The replacement of defective / nonfunctional parts shall be measured & paid for separately as “Supply only” under appropriate item of Sch ‘A’ and fixing rate for new items are deemed to include under these item. (ii) Burnt out windings of motor shall be replaced, measured and paid for separately under appropriate item of Sch ‘A’ for rewinding. (iii) The rates for above items are deemed to include transportation to & from of pumps/ motors to workshop as approved by Engineer-in-charge for necessary repairs, alignment and testing of pump and motors at workshop. (b) Re-metalling to Pump shaft, polishing and grinding and making standard size to matching with Gun Metal Bush / Neck-ring shall be measured and paid for separately under appropriate item of Sch ‘A’ (iv) Lifting of pump and motor from bore well and lowering of pump and motor after repairs shall be measured and paid separately under appropriate item of Schedule `A'.
-
-
-
... More
20 HP, three phase, 415 Volts, 50 Hz, AC supply
12
-
-
... More
17.5 HP, Three phase, 415 Volts, 50 Hz, AC supply
9
-
-
... More
Rewinding of submersible electric motors with existing size PVC insulated, copper conductor including cleaning the slots with carbon- tetra-chloride solution before rewinding, transportation to site, fixing / lowering in position & testing on full load etc complete all as specified and directed :- Note:- Taking out of repairing motor/pump shall be included under relevent item.
-
-
-
... More
20 HP, three phase, 415 Volts, 50 Hz, AC supply
10
-
-
... More
17.50 HP, Three phase, 415 Volts, 50 Hz, AC supply Note: (For Item No. 22.01 to 22.02)
Only one time payment will be considered in complete contract period for submersible motor winding in case of submersible motor off loads/ burnt during contract period.
12
-
-
... More
Supply only the following items / parts of AC submersible motor of any description & any capacity complete all as specified and directed:-
-
-
-
... More
Upper & lower rubber housing bush
42
-
-
... More
Stainless steel rotor sleeve.
16
-
-
... More
Thrust bearing complete set.
12
-
-
... More
Upper cast iron housing.
12
-
-
... More
Lower cast iron housing
12
-
-
... More
Upper MS Flange with stud
20
-
-
... More
Lower MS Flange with stud
20
-
-
... More
Motor base CI
16
-
-
... More
segment holder assembly
16
-
-
... More
Motor Strainer
16
-
-
... More
"O" ring
20
-
-
... More
Circlip
20
-
-
... More
Allen drain plug G.M.
16
-
-
... More
Oil seal
12
-
-
... More
Coupling set with key of stainless steel
8
-
-
... More
Gun metal sand guard.
5
-
-
... More
Gun metal neck ring.
8
-
-
... More
Gun metal impeller.
8
-
-
... More
Gun metal body bush
8
-
-
... More
Pump Key
8
-
-
... More
Inlet bracket
5
-
-
... More
Cable guard
8
-
-
... More
Pump strainer
8
-
-
... More
Tie bar
5
-
-
... More
Impeller lock nut
5
-
-
... More
Sim wisher
8
-
-
... More
LN key (Top wisher)
8
-
-
... More
Gun metal diffuser
5
-
-
... More
D.O. bush for diffuser
5
-
-
... More
Machining work for the following item & capacities of the submersible motors of any description complete all as specified and directed:-
-
-
-
... More
Rotor machining, grinding balancing & reconditioning.
4
-
-
... More
Motor tube boring, machining & reconditioning
4
-
-
... More
Motor lamination setting with material
4
-
-
... More
Thrust bearing & plate reconditioning
4
-
-
... More
Rotor reconditioning
4
-
-
... More
Slot repairing in stator
4
-
-
... More
Supply only the rotor for the following capacity of AC submersible motor of any description complete all as specified and directed:-
-
-
-
... More
Rotor for 17 to 17.5 HP Submersible motor.
4
-
-
... More
Rotor for 20/21 HP Submersible motor.
4
-
-
... More
Material & labour for MS clamps made out of MS flat 65mm x 8mm thick (high carbon forged steel) made to shape and size as required for 80/50mm column pipes with and including suitable nuts, bolts & washers etc complete all as specified and directed.
15
-
-
... More
Supply and fixing only for GI bend 90 Degree suitable for 80mm Dia column pipe, heavy duty, flanged & drilled at one end and socketed at other end with having arrangement for mounting pressure gauge complete all as specified and directed.
8
-
-
... More
Supply and fixing only for GI bend 90 Degree suitable for 50mm Dia column pipe, heavy duty, flanged & drilled at one end and socketed at other end with having arrangement for mounting pressure gauge complete all as specified and directed.
1
-
-
... More
Supply only the shaft for the multistage submersible pump made out of Stainless steel of following description complete all as specified and directed :-
-
-
-
... More
Multistage submersible pump having 07 stages.
3
-
-
... More
Multistage submersible pump having 08 stages.
3
-
-
... More
Multistage submersible pump having 09 stages.
3
-
-
... More
Multistage submersible pump having 10 stages.
2
-
-
... More
Multistage submersible pump having 11 stages.
3
-
-
... More
Multistage submersible pump having 15 stages.
3
-
-
... More
Multistage submersible pump having 20 stages.
2
-
-
... More
Material and labour for PCC (1:3:6) type C2 using 40mm graded stone aggregate for cutting portion of roads/paths/hard standings etc and making good surface including necessary frame work where required complete all as specified and as directed.
6
-
-
... More
Supply, fixing, jointing, taking down and testing in repair ISI Marked, of approved quality, cast iron sluice valve of class PN-1.6 conforming to IS-14846 of 2000 both ends flanged with iron wheel head and stainless steel spindle, long body type, jointed and tested complete all as specified and directed for following bores :-
-
-
-
... More
300mm bore
1
-
-
... More
200mm bore
6
-
-
... More
150 mm bore
10
-
-
... More
100 mm bore
15
-
-
... More
80 mm bore Note:- Joints of the sluice valve shall be measured and paid for separately under appropriate item of Schedule `A'.
10
-
-
... More
Dismantling leaking joints of flanged pipes in position, including removing old rubber or fibre board gaskets, bolts, newscast iron pipes and fittings complete all as specified and directed for following sizes:-
-
-
-
... More
300mm bore
4
-
-
... More
200mm bore
8
-
-
... More
150 mm bore
26
-
-
... More
100 mm bore
40
-
-
... More
80 mm bore
50
-
-
... More
Material and labour for rubber gasket joints in flanged end cast iron pipes and fittings complete with and including minimum 3 mm thick rubber/fibre gasket and necessary nuts/bolts/washers all as specified and directed for following sizes:-
-
-
-
... More
300mm bore
4
-
-
... More
200mm bore
8
-
-
... More
150 mm bore
30
-
-
... More
100 mm bore
40
-
-
... More
80 mm bore
15
-
-
... More
Supply, fixing, jointing, taking down and testing, in repair ISI Marked, of approved quality, gun metal globe/gate valve with iron wheel head, both ends screwed for iron pipe complete all as specified and directed for following bore of pipes:-
-
-
-
... More
50mm bore
12
-
-
... More
40mm bore
20
-
-
... More
25mm bore
30
-
-
... More
20mm bore
42
-
-
... More
15mm bore
24
-
-
... More
Dismantling and taking out existing damaged / rusted valve pit cover of any size from valve pit chamber, not less than 1.25 M x 1.25 M and M & L for new valve pit cover of size not less than 1.25 M x 1.25 M made out from MS Angle iron of size 50 x 50 x 5mm frame with fixing the MS sheet of thickness 3 mm welded on MS angle complete including locking arrangement with applying two coat of synthetic enamel paint 1st grade over a coat of red oxide primer complete all as specified and directed.
12
-
-
... More
M&L for repair in construction of brick masonary valve pit of intemal dimensions 900mm x 900 mm x 600 mm complete and fabrication of 3.0 mm thick MS Sheet cover and angle iron frame made out of 40mm x 40mm x 6 mm MS angle iron and one side provided with hinge with locking arrangement & duly painted with two coats of black bituminous paint over a coat of red oxide primer induding necessary dismantling old existing valve pit chamber, earth work and PCC work complete all as specified and as directed.
10
-
-
... More
All as per srl item No 36 here-in-before but of size of valve pit 2000mm x 1000mm x 1000mm complete all as specified and directed.
8
-
-
... More
All as per srl item No 36 here-in-before but of size of valve pit 900mm x 900mm x 900mm complete all as specified and directed.
8
-
-
... More
Disconnecting, Dismantling and opening complete valve from pipe line and refixing the same to its position after following repair of size 150 mm dia complete all as directed:- (a) Fabrication and fixing of stainless steel spindle as per sample including threading and machinery work. (b) Fabrication and fixing of GM Nut (Gutka) (c) Fabrication and fixing of gland plate. (d) Complete replacement of damaged nut, bolt, washers and packing.
12
-
-
... More
All as per srl item No 39 here-in-before but of Size 100mm Dia.
10
-
-
... More
All as per srl item No 39 here-in-before but of Size 80mm Dia.
10
-
-
... More
M&L for Lab Testing report of drinking water/bore well water complete,arrangement for carried out of Chemical Analysis test of drinking water as per IS 10500:2012 (second revision) from an Acredited laboratory complete all as specified and directed. Note:- (i) The rate for collection of sample of drinking water/Bore well water for testing in their own container and carrying it to the Lab is taken from following locations and submit the report to Engineer-in-charge all as specified. (ii) All tests shall be carried out at a NABL accredited lab only after obtaining prior written approval of the GE.
30
-
-
... More
Material and labour for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth strip 32 x 6 mm (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 40 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit , internal surface of concrete shall be given 10mm thick plaster in CM 1:4 and 40 mm thick precast RCC cover 1 : 2 : 4 ,type B-1( using 20 mm graded crushed stone aggregare ) reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with 12mm dia round bar as in handle including taking down of existing earthing complete all as specified & directed.
Note: (i) Test result of earthing to be submitted by the contractor for all earthing. (ii) Earth filling shall be done by vegetable soil. (iii) Soil should be free from stone, boulders,aggragates,gravel etc. (iv) The rate quoted by the bidders shall be also be deemed to include :- (a) Supply of charcoal and common salt.
15
-
-
... More
Complete arrangement for carried out of yeild test of bore well. Note:- (i) The Sample of drinking water/Bore well water for yeild testing taken from following locations and submit the report to Engineer-in-charge all as specified:-
(a) Depth of Borewell : upto 300 Feet
(b) Static Water Level (SWL) : upto 100 Feet
(c) Pump Used for Testing : Compressor type
(d) Duration of Pumping : 4 Hours (e) Drawdown Level (PWL) : upto 150 Feet
(f) Yield Observed : upto 2.5 Inch (Approx 2500 LPH) (ii) All tests shall be carried out at a NABL accredited lab only after obtaining prior written approval of the GE.
18
-
-
... More
Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32 x 6 mm galvanised iron complete all as specified and directed.
98
-
-
... More
Supply and fix 10 Watt aviation obstruction light LED type comprising of aluminium housing with polycarbonate enclosure all as specified and directed. (Make Bajaj Cat No. BGAV 302 LED or equivalent.)
7
-
-
... More
Supply and fix MCB DB, SPN, 4 ways, Isolated neutral bar with double door IP54 protection door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete all as specified and directed.
7
-
-
... More
Supply & Fixing MCB SP, 6 to 32 Amps ('B' series) having current rating 10 KA complete all as specified and directed.
7
-
-
... More
Supply & fixing MCB SPN, 40 Amps to 63 Amp ('C' series) having current rating 10 KA complete all as specified and directed.
7
-
-
... More
Supply,fix including testing comissioning XLPE insulated screened PVC bedded galvanised steel strip or wire armoured power cable (Heavy duty) 1100 V grade with stranded aluminium conductor of size 2 core 6 Sqmm on poles /walls as cable for aviation obstruction light all as specified and directed.
400
-
-

