Madhya Pradesh Power Generating Company Limited Tender

Flow switch 1’’NPT 15A 250V, Type-WFS 6000, 150-PS 1000C, Operating Pressure: 10kgf/cm² (1000KPa), Withstand Pressure: 17.5kgf/cm² (91750KPa), insulation Resistance Over 100 ohm, DC500VM, Withstand Voltage: AC1500V/1minute, Contact Point Life: 1000K Cycle, Bellows Life: 500K Cycle, Temperature of Fluid Max: 100ºC (212ºF)

Oil pressure switch AC – 230V, 5A, DC-230V, 0.2A, DC-SOV-1A, Construction: Spring loaded sealed piston type, Mounting style: Sub plate mounting, Interface: Factory standard, Mounting position optional., Hydraulic medium: Mineral oil, Viscosity range: 10cSt to 100 cst., Oil cleanliness requirement: As per ISO 4406 Code 20/18/15 or better., Max operating pressure: 50KG/CM2, Pressure range available: As Adjustable upto 10,50,100,200,350 and 420 bar, Switching pressure differential: Refer graph, Switching Frequency: 80 Cycles/min., Life: 1 minimum., Electrical rating: UL/C –UL rating 6A, 125/250 VAC., EN/EC rating 6(3)A, 250 V ~ 5E4 T85, u approved., Electrical connector: Plug – in connector conforms to DIN 43650, ISO 4400

SOV Single acted PORTS: 3 MAIN PORTS, VALVE: DIRECTIONAL VALVE WITH HIGH, PERFORMANCE WET – PIN SOLENOID WITH DETACHABLE COIL, Size: 10, COMPONENT SERIES: 30 ... 39 (30 ... 39: UNCHANGED INSTALLATION AND MOUNTING DIMENSIONS), AC VOLTAGE: 230 V 50/60 Hz, MANUAL OVERRIDE: WITH CONCEALED MANUAL OVERRIDE (STANDARD), ELECTRICAL CONNECTION: WITHOUT MANTING CONNECTOR; CONNECTOR DIN EN 175301-803, Voltage type: Alternating voltage 50/60 Hz, Available voltages: V 42,110,230, Voltage tolerance (nominal voltage): Voltage tolerance (nominal voltage), Power consumption W:- Holding power VA:90, Switch-on power VA:550, Duly cycle (ED) %:100, Switching time according to ISO 6403 – ON – OFF ms 15 ... 25, ms 20 ... 30, Maximum switching frequency 1/h: 7200, Maximum surface temperatures of the coil ºC [ºF]180[356], Protection class according to DIN EN 60529IP 65 with mating connector mounted and locked, Insulation class VDE 0580 H – H, Electrical protection Every solenoid must be protected individually, using a suitable fuse with tripping characteristic K (inductive loads). MNR:R983030938, 4 WE10D, 3X/CW230N9K4, FD:16W40