Indo Tibetan Border Police Tender

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

12 mm cement plaster finished with a floating coat of neat cement of mix :- 1:4 (1 cement: 4 fine sand)

Applying 12mm cement plaster of mix 1:6 ( 1Cement:6 Course sand)

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers asrequired complete as per the direction of Engineer-in-charge

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Making Sports Base work and Asphalting base as per below.- (1) SPORTS BASE WORK (Total thickness 6 inches ) - (a) excavation upto 4" - 6" (b) providing herbicide treatment for entire area (c) Supplying , spreading and levelling stone for WBM thickness 4" by using stone agreegate of size 40 - 60 mm. Compact and consolidate using water, soil and roller (2) Asphalting Leveling (a) Providing and laying bitumen tack coat after proper cleaning of previous layer. The grade of bitumant shall be VG (10-30) (b) providing and leveling stone aggregate (size 15 - 19 mm ) mixed with bitumen premix layer. The grade of bitumen shall be VG (10-30). Thickness of this layer shall be 35-40 mm after compacting with roller. (c) Providing intermediate tack coat after properly cleaning previous layer. (d) providing and levelling stone aggreegate (size 6-10mm ) mixed with bitumen premix layer. The grade of bitumen will be VG (10-30). The thiuckness of this layer will be 15-20 mm after compacting with roller. (e) Providing seal coat with stone dust

Making Outdoor synthetic court of ITF Approved Basketball Court will be consisting of different layers of different materials in order to give it a world class quality. After Asphalt base, the next layer will be of the Concrete Primer which is a high strength acrylic primer that helps in enhancing the adhesion of the court acrylic coatings. The next layer will be of Acrylic Resurfacer which isthe 100% acrylic based emulsion blended with selected fibers and fillers to be used for smoothing rough pavements. The next coating will be of Rubber Cushion which helps in giving smother finish and better level of comfort. After that, the Color Coating is provided applied which is wear resistance. It is a 100% acrylic emulsion consisting of brilliant pigments and quality polymers that are blended into a highly concentrated form. ITF approved acrlic of 8 layers for basketball synthetic Court LAYERS (08 Nos), Ist Layer : - Primer 01 layer IIst Layer : - Resurfacer layer 2 layers IIIst Layer : - Cushion layer 3 layers Ivth Layer : - Color 2 layers

PROVIDING BASKETBALL MOVABLE POLE Made of 6" square mild steel black pipe and finished with high quality P.U. Paints movable on ground 3.2 miter ectension Total weight 750 Kg per piesce ( 1500 kg per pair ) 200 mm basketball "A" grade malaysian board with angle frame 100 % vergin monomer dunking ring with Net