Indo Tibetan Border Police Tender

Brick work with modular bricks of class designation 75 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)

Centring and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete using MS angles40x6mm.mtr

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.Internal work - Exposed on wall 15 mm dia. nominal bore

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP - R plain & brass threaded polypropylene random fittings including trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. PN - 16 Pipe, 90 mm OD (SDR – 7.4)

12 mm cement plaster mix 1:4 (1 cement: 4 coarse sand)

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. HINDWARE/CERA

Providing and fixing ceramic glazed floor tiles 300x300 mm ( thickness to be specified by manufacture) conforming to IS : 15622 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colours, shades except begundy, bottle green, black as approved by Engineer-in-charge, laid on 20mm thick cement mortar 1:4 ( 1cement: 4 course sand ) incl. pointing the joints with white cement and matching pigment etc, complete. -

Providing and fixing Ist quality ceramic glazed wall tiles ( thickness to be specified by manufacture) conforming to IS : 15622 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colours, shades except begundy, bottle green, black as approved by Engineer-in-charge in skirting, risers of steps and dedos over 12 mm thick bed of cement mortar 1:3 ( 1 cement: 3course sand ) and jointing with gray cement slurry @ 3.00 kg per sqmtr incl. pointing in white cement mixed with pigment of matching shade complete.

30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm ± 0.2 mm with inbuilt decorative moulding edging on one side. The styles and rails mitred and joined at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm ± 0.1 mm wall thickness. The lock rail made up of 'H' section, a UPVC hollow section of size 100x30 mm and 2 mm ± 0.2 mm wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm ± 0.1 mm wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :200x10 mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :100 mm

Providing and fixing wash basin with CI brackets, 15mm CP brass piller taps ,32 mm cp brass waste of standard pattern including painting of fittings and brackets , cutting and making good the wall wherever required : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. HINDWARE/CERA

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shadeNew work (two or more coats) over and including priming coat with cement primer.

Finishing walls with Acrylic smooth exterior paint of required shade :New work (Two or more coats applied @ 1.67 ltr/10 sqm) and including priming coats of exterior primer applied @ 2.20kg /10sqm.Brand should be used Asian,Berger , nerolac

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. 15 mm nominal bore.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.Group A

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)2 + 4 way, Single door

PROVIDING AND FIXING 9'' DIA EXHAUST FAN PVC TYPE AS PER DIRECTION OF ENGINEER-IN-CHARGE .Brand should be havells /bajaj/philips/usha/

PROVIDING AND FIXING 2 fee long tube fitting AS PER DIRECTION OF ENGINEER-IN-CHARGE .Brand should be bajaj/philips/wipro

Providing and fixing soil, waste and vent pipes : 100 mm dia. PVC Pipe as per IS: 1729.PRAKASH/TIRUPATI/PRINCE/AKG

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore LEADER /L&K / SANT

PROVIDING AND FIXING MIRROR LIGHT WITH ALL FITTING AS PER DIRECTION OF ENGINEER-IN-CHARGE .Brand should be havells /bajaj/philips/usha/

Providing & fixing highdensity polyethylene water storage tank IS 12701 marked with cover and suitable locking arrangement and making neccesary holes for inlets , outlets over flow pipes but without fitting and the base support for tank . 500 litre with necessary all GI PIPE fittings complete .