Indo Tibetan Border Police Tender

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) .

Providing and Laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work upto plinth level: 1:4:8 ( 1Cement:4Coarse sand:8 Graded stone aggregate 40mm nominal size) (Cement should be use OPC 43 grade make of ACC/ Ambuja//Birla /Ultra Tech/J.P.)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) Cement should be use OPC 43 grade make of ACC/ Ambuja//Birla /Ultra Tech/J.P.)

Centering and shuttering i/c strutting propping ect. And removal of form work.Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Steel reinforcement for RCC work including straightening cutting bending and placing etc. all complete above plinth. TMT bars. Steel should be used make of Sale/TATA/ RINL.

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : with Cement mortar 1:6 (1 cement : 6 coarse sand) Cement should be use OPC 43 grade make of ACC/ Ambuja//Birla /Ultra Tech/J.P.).

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) Cement should be use OPC 43 grade make of ACC/ Ambuja//Birla /Ultra Tech/J.P.)

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete, size 250x16 ( Aluminium sliding door bolts of make Classic/IPSA (ISI))

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200x10 mm ( Aluminium Tower bolt of make Classic/IPSA (ISI)

Providing and fixing aluminium handles with necessary screws etc. complete: 125mm ( Aluminium handle of make Classic/IPSA (ISI))

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-Charge

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing 30 mm thick plain PVC door shutters

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. ( Make of Kajaria/Somany, Nitco Premium Quality as approved by Engineer-In-Charge).

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. ( Make of Kajaria/Somany, Nitco Premium Quality as approved by Engineer-In-Charge)

Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) over wooden karries or R.C.C. battens or structural steel sections or directly on walls (Karries or battens or structural steel sections to be paid separately), including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete : Red sand stone slab 40 to 50 mm thick . Rate including Over laping of stones for fixed in sloping roof directly over walls.

Only fixing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) over wooden karries or R.C.C. battens or structural steel sections or directly on walls (Karries or battens or structural steel sections to be paid separately), including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete : Red sand stone slab 40 to 50 mm thick . Rate including Over laping of stones for fixed in sloping roof directly over walls. (Existing dismentalled stone will be used in roof.)

Applying 12 mm Cement plaster of Mix 1:6 ( 1Cement: 6 Coarse sand) over brick work.

Cement Plaster 1:3 ( 1 Cement : 3 Fine sand) finished with a floating coat of neat cement . 12 mm thick.

White washing with lime to give an even shade : New work (three or more coats) .

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge, In cement mortar .

Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead : Thickness up to 40 mm.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. (Make of Hindware/ Parryware/ Jaquar /Grohe / Kohler /CERA as approved by Engineer-In-Charge

Providing and fixing soil, waste and vent pipes : 100 mm dia. Centrifugally cast (spun) iron socketed pipe as per IS: 3989. (Make of NECO/SKF/BIC/RIF or equivalent as approved by Engineer-In-Charge.)

Providing and filling the joints with spun yarn, cement slurry and Cement Mortar 1:2 (1Cement :2 Fine sand) in S.C.I./C.I. Pipes 100 mm dia Pipe.

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete 100 mm Dia Sand cast iron S&S as per IS - 3989

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete 100x100x100 mm Sand cast iron S&S as per IS - 3989

Providing and fixing terminal Guard 100 mm Sand cast iron S&S as per IS - 3989

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work with 15 mm dia. nominal bore. ( Make of TATA/ JINDAL HISAR/Zenith and fitting of UNIK )

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work with 25 mm dia. nominal bore. ( Make of TATA/ JINDAL HISAR/Zenith and fitting of UNIK )

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work with15 mm dia. nominal bore. ( Make of TATA/ JINDAL HISAR/Zenith and fitting of UNIK )

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work with 25 mm dia. nominal bore ( Make of TATA/ JINDAL HISAR/Zenith and fitting of UNIK/ TATA /Jindal /Zenith ).

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore make of Leader/ Zoloto/ Saint)

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore make of Leader/ Zoloto/ Saint/L&K/ISI make )

Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length, 15 mm nominal bore ISI make.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work). 15 mm nominal bore make of UNIK/Jindal/TATA/Zenith.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work). 25 mm nominal bore make of UNIK/Jindal/TATA/Zenith.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank make of Sintax/ Himgiri/ Victos/ Campus as approved by Engineer-in-charge with IS code IS 12701 ISI with CLMC Number Imposed/ Ingraved on Tank.

Providing and fixing PTMT bib cock of approved quality and colour 15 mm nominal bore, 122mm long, weighing not less than 99 gms .

Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms .

Providing and fixing PTMT, push cock of approved quality and colour 15 mm nominal bore, 98 mm long, weighing not less than 75 gms .

Providing and fixing PTMT grating of approved quality and colour. 100 mm nominal dia .

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group A . (Wire should be used Havells/Kalinga/RR Kabil /Plaza/L&T/Finolex ) with ISI make and Switch make of Havells/ Anchor/ Crabtree as approved by Engineer-In-Charge.